CTE T500 TG ARGB Snow Full Tower Chassis The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support up to a 420mm AIO radiator at the front and a maximum 360mm AIO radiator at the rear. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE T500 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE T500 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. Experience the perfect combination of design and performance with our CTE T500 The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support a maximum of a 420mm AIO radiator at the front and a maximum of two 360mm AIO radiators at the front and rear. There's plenty of room to install cooling components, including front and rear fan brackets, top and right fan vents, bottom fan vent, and shroud vent, and the case can accommodate up to eleven 140mm/120mm fans. Other cool details include removable filters, pump and tank support, and Velcro straps for easy cable management. Our CTE T500 Snow is the perfect choice whether you're looking for a custom liquid cooling setup or a dual AIO setup! Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE T500 TG ARGB's versatile interior features two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Support for dual 360mm radiators Our CTE T500 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, allowing users to install up to two 360mm radiators simultaneously at the front and rear. To ensure AIO compatibility, users can install up to one 420mm AIO radiator on the front and up to two 360mm AIO radiator on the front and rear. All your dream cooling components will fit! The CTE T500 Full Tower case has a huge fan and cooler installation capacity: up to eleven 140 mm/120 mm fans and 360 mm AIO coolers in various locations (420 mm AIO cooler at the front). Moreover, equipped front and rear fan brackets and mounting locations on the top, right side and lid ensure easy installation of all desired cooling components. Rock your world with three pre-installed white 140mm CT140 ARGB fans The CTE T500 TG ARGB Snow Full Tower case is equipped with three white 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. We've tested everything, so you don't have to At Thermaltake, we always stress test our products under harsh conditions to ensure product quality. CTE T500 TG ARGB Snow Full Tower Chassis products have been tested at 100% full load for 30 minutes, with the highest-end CPU, GPU and motherboard at the time of testing, compared to a consumer-style configuration, which allowed us to test how the chassis handles in real-world situations.
Compact Micro-ATX case in white, made of steel and plastic, for Micro-ATX or Mini-ITX motherboards, four-slot GPU up to 415 mm, suitable for 360 mm radiator
Darkflash DB460M computer case (white)Darkflash DB460M is a reliable computer case designed for all gamers looking to combine functionality with aesthetics. It offers a spacious interior for convenient installation of graphics cards up to 420 mm in length, a tempered glass side panel, a full mesh front panel and excellent cooling options (up to 12 fans and a 360 mm radiator can be installed). The chassis looks sleek, and is compatible with M-ATX and ITX motherboards and equipped with USB 3.0 ports for fast data transfer.Minimalist designThe DB460M chassis features a tempered glass clamshell side panel - which opens without tools, greatly speeding up access to components and simplifying computer upgrades. The mesh front panel emphasizes the gaming character of the case, and what's more, it provides maximum airflow, supporting efficient cooling even during intensive work. As a result, you are assured that the inside of your PC is further protected.Designed with expansion in mindThe interior of the DB460M has been laid out to allow convenient installation and replacement of components when the need arises. The case supports M-ATX and ITX format motherboards, and its spacious design allows for graphics cards up to 420 mm in length and CPU coolers up to 174 mm in height. There are also 4 standard PCle slots at your disposal, optimized for 5 slots,which ensure compatibility with high-performance GPUs.Exceptional cooling performanceThe Darkflash DB460M allows you to install up to 12 120mm fans or 4 140mm fans, which translates into excellent heat dissipation from inside your PC. The case also supports the installation of water cooling - it is possible to mount a heatsink of up to 360 mm, making it an ideal choice for systems that require high thermal performance.Connectors and full functionalityOn the front of the case you will find USB 3.0 ports and two USB 2.0 connectors for fast data transfer and convenient connection of peripheral devices. As a result, the DB460M will prove itself both as a base for a gaming kit and a high-performance workstation.High build quality and aestheticsDarkflash DB460M is a combination of exceptional design, careful workmanship and high-quality materials. The case's clean lines, thoughtful cable layout and modernistic design make it a practical as well as stylish centerpiece of any computer workstation. The components of your equipment have never looked so good before! ManufacturerDarkflashModelDB460MHousing typeBig TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5'HDD x2, 2.5'SSD x2Expansion card slots4Max PSU length240 mmMax length of graphics card420 mmMax height of CPU cooler174 mmMax number of fans12Fan mounting optionsRear: 120 mm x1; Top: 120 mm x3/140 mm x2; Bottom: 120 mm x3; Front: 120 mm x3/140 mm x2Water cooling mounting optionsTop 360/280/240 mm; Rear 120 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AUDIOMaterial0.5 mm SPCCColorWhiteHeight410 mmWidth220 mmDepth470 mm
Der H2 Flow ist ein kompaktes 20,7 l vertikales Mini‑ITX‑Gehäuse, entwickelt für leistungsstarke Small‑Form‑Factor‑Builds. Es unterstützt GPUs bis zu 331 mm und Flüssigkeitskühler bis zu 280 mm, mit ultra‑feinen Mesh‑Paneelen für maximale Luftzirkulation. Ein Seitenpanel aus Glas und Mesh setzt deine Komponenten in Szene, während werkzeugloser Zugang und intelligentes Kabelmanagement den Zusammenbau einfach machen. Eine geteilte Seitenwand kombiniert gehärtetes Glas, um Ihre Komponenten optimal in Szene zu setzen, mit darunterliegendem Mesh-Gewebe für maximale Luftzirkulation. Speziell entwickelt, um die Pumpenkappen von NZXT Kraken AIO-Wasserkühlungen – wie beispielsweise die Kraken Elite 280 RGB – perfekt in Szene zu setzen. In das Gehäuse passen GPUs bis zu 331 mm, einschließlich vieler der aktuell leistungsstärksten Karten wie der RTX‑50‑Serie. Ultra‑feines Mesh maximiert den Luftdurchsatz und filtert Staub, damit Komponenten kühl und sauber bleiben. Integrierte Kabelführungs‑Punkte und Klettbänder machen es einfach, Kabel ordentlich zu halten, verbessern den Luftstrom und das Aussehen deines Builds.
Chenbro bietet mit dem RM14300 ein nur 41cm tiefes und sehr hochwertiges 19" Gehäuse mit 1HE, welches für den Einsatz mit mini ITX und micro ATX Mainboards geeignet ist. Das Gehäuse lässt sich auch um 180 Grad gedreht einbauen, so dass die normalerweise rückwärtigen Ports des Mainboards frontseitig erreichbar sind. Neben dem Mainboard können intern im Gehäuse noch bis zu 2 x 3,5" HDDs und 2 x 2,5" HDDs/SSDs verbaut werden. Drei 40mm Turbofan Lüfter von NMB mit bis zu 12.000upm und 4-poligem PWM Anschluss sind bereits im Gehäuse vorinstalliert. Frontseitig sind zwei USB 3.0 Ports verfügbar. Intern lässt sich via optionaler Riserkarte noch eine PCIe Steckkarte mit voller Bauhöhe integrieren.
Tootekood: AIR 100 ARGB WHGTIN: 4710562745252Korpused
Compact airflow case from Montech, for Mini-ITX and Micro-ATX motherboards, supports radiators up to 280 mm, side panel made of tempered glass with hinges, four pre-installed ARGB fans
Compact Micro-ATX case with wood decor, made of steel and plastic, for Micro-ATX or Mini-ITX motherboards, four-slot GPU up to 415 mm, suitable for 360 mm radiator
The Lian Li Vector V100 combines stylish yet simple design with high compatibility and a special cutout for more individuality. With this desktop case, you get the perfect chassis for your next gaming PC. White midi-tower with tempered glass on the side and front Supports motherboards up to ATX form factor and with back-connect design Optimal cooling with up to nine fans and radiator support up to 360 mm Space for graphics cards up to 415 mm and CPU coolers up to 180 mm in height Four 120 mm fans with RGB lighting included Cutout with removable cover for collectibles The Lian Li Vector V100: midi-tower with a stylish design and plenty of space for hardware Express your personality with the Vector V100. Thanks to tempered glass panels on the side and front, you have an unobstructed view into your tower’s interior, while the LED strips are just the beginning of impressive RGB lighting. Make your build something special Directly behind the front of the V100 case is a cutout. Whether for figures or other collectibles—you can display your interests. If you don't need the cutout, simply cover it with the removable panel. Extensive cooling options Four 120 mm ARGB fans are already pre-installed—three reverse fans on the side and one with standard orientation at the rear. Thanks to their reversed fan blades, the sideways-mounted fans provide efficient airflow—and look just like regular fans. Additional mounting points for more fans are located on the top and bottom. If you prefer water cooling, you can also install a radiator up to 360 mm on the top panel. The dust filter at the bottom is easy to remove, so you can clean it whenever needed. Easy installation of your gaming hardware The Vector V100 offers plenty of space for your components—even high-end hardware. Thanks to support for motherboards with back-connect design and tidy cable management, your build will really stand out.
Internal 2x 3.5 "(transverse, hard drive cage), 2x 2.5", Front I / O 2x USB-A 3.0, 1x headphones, 1x microphone, PCI slots 4, Fan (front) 3x 120mm (optional) or 2x 140mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 320mm, Color black, inside black, Lighting without lighting, Dimensions (WxHxD) 225x431x400mm, Volume 38.79l, Weight 6.20kg, Housing type minitower, Special features Cable management, dust filter, graphics card holder, viewing window made of glass, w/o psu, R-MACUBE110-BKNGM1N-G-1
Tootekood: A290 WHITE WITHOUT FGTIN: 5906168431036Korpused
Darkflash A290 computer case (white)Want to build yourself the perfect computer for work or gaming? The Darkflash A290 case will help you do it! It is compatible with many types of components and allows you to create a powerful cooling system. It also offers several key ports and buttons, including USB 3.0, USB 2.0 and a headphone/speaker output. It is also distinguished by a modern, stylish design - a tempered glass side panel will give you stunning visual effects.Plenty of expansion possibilitiesThe A290 case is compatible with a range of components, so you can easily build exactly the computer of your dreams. The product supports such motherboard standards as ATX, M-ATX and ITX, and allows you to mount a graphics card with a maximum length of 260 mm. You'll also have room for CPU cooling up to 160 mm in height.Efficient coolingDon't worry about your computer overheating. The well-thought-out design of the A290 case allows for efficient heat dissipation, and there is also the option to install 5 120 mm fans. You can also install 240 mm water cooling. Now you can play even the most dynamic games or use demanding software without any problems!Thoughtful designThe side panel of the case is made of tempered glass. This favors the display of components equipped with backlighting, emphasizing the gaming character of your configuration. What's more, the A290 is distinguished by its modern finish, which further enhances the visual appeal of the hardware. The case is also equipped with a dust filter, which can be easily removed and cleaned. This makes it effortless to keep your equipment in excellent condition.More amenitiesYou can place an HDD or SSD in the case. When you choose the A290, you'll also gain access to an interface with a USB3.0 port, which features outstanding speed. And when you want to expand your hardware configuration, 7 expansion card slots will help.IncludedA290 computer caseMotherboard/SSD screws x 18Motherboard copper columns x 3Power supply screws x 6Hard drive screws x 4 ManufacturerDarkflashModelA290Housing typeMiddle TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardBottom ATX PSUInternal disk/drive slotsHDD x1; SSD x1;2.5" internal bays1Internal bays 2.5/3.5"1Expansion card slots7Maximum graphics card length260 mmMaximum CPU cooling height [mm]160 mmMaximum number of fans5 x 120 mmFan mounting optionsFront: 120 mm x 2; Top: 120 mm x 2; Side: 120 mm x 1Water cooling mounting optionsFront: 120 mm fan x2; Rear: 120 mm fan x1; Top: 120 mm fan x2;Number of fans installed-Fan model-Installed fans-Buttons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2 Headphone/speaker outputMaterial0.5 mm SPCCColorWhiteAdditional information-Included accessories-Height433 mmWidth190 mmDepth320 mm
LANCOOL III Mid-tower modular chassis for all kinds of configurations Equipped with 4 × 140 PWM fans (ARGB or non-RGB) Featured airflow optimized mesh structure and hinged side panels Supports up to 420 radiator or 3 x 360 radiators and a maximum of 10 fans Offers 12 storage drives mounting locations Upgraded cable management solution for a clean build
CORSAIR 3000D RGB mid-tower Tempered Glass White The CORSAIR 3000D RGB AIRFLOW mid-tower ATX case features intensive airflow powered by three high-performance factory-mounted CORSAIR AR120 RGB fans for superior cooling and fantastic lighting effects. The addition of a tempered glass side panel turns your PC into a state-of-the-art computer technology display. The intelligently laid out interior holds up to 8 x 120mm fans or 4 x 140mm fans. With room for radiators up to 360mm in size, support for 3.5" and 2.5" drives, and support for four-slot graphics cards up to 360mm in length, you can create a high-performance system. The front I/O panel has two USB 3.2 Type A ports and a microphone and headphone jack. Outstanding Cooling Capabilities: Spacious interior holds up to 8 x 120mm cooling fans or 4 x 140mm fans with multiple heatsinks including one 360mm front and one 280mm on top (depending on the height of the memory modules) RAM). A complete mid-tower package: A mid-tower ATX case with a sleek, high-airflow design and three pre-installed CORSAIR AR120 RGB fans for superior cooling and compelling lighting effects. Dedicated graphics card cooling: The case accommodates the latest graphics cards and has two additional 120mm fan mounts on the PSU shroud that allow you to install fans directing the airflow directly to the graphics card. Three-slot graphics support: For an advanced, high-performance computing setup, you can freely install a three-slot graphics card up to 360mm in length into the chassis. Optimized front panel for intensive air circulation: The optimized steel front panel provides powerful airflow in the system for maximum cooling. Tempered glass side panel: Show off your internal components in elegant style All the storage you need: Holds up to 2 SSDs and 2 HDDs.
The Jonsbo Z20 Mesh is a stylish and functional Micro-ATX case, specially designed for PC enthusiasts who value a compact design and optimal cooling. With its mesh front and side panel, it offers excellent airflow. Mesh front and side panels allow for optimal cooling Compact size with carrying handle – Perfect for on the go Supports graphics cards up to 363 mm in length for high-end GPUs USB 3.1 Type-C port on the front for fast data transfer Compact dimensions save space without compromising performance Efficient Cooling and Modern Design The Z20 Mesh is specially designed for first-class airflow and ensures efficient cooling of your components. Thanks to its well-designed mesh panels and optimized air guidance, your PC system stays cool and powerful even under heavy load. Benefit from high compatibility despite its compact build. The case offers space for large GPUs, powerful cooling systems, and cable management – without appearing bulky. Versatile Compatibility and Easy Installation This case supports both Mini-ITX and Micro-ATX motherboards and offers flexible mounting options for various hardware configurations. The thought-out interior design makes installation and cable management easy. User-Friendly Front Ports With a USB 3.1 Type-C port, a USB 3.1 Type-A port, and headphone and microphone jacks on the front, the Z20 Mesh provides fast and convenient access to important connections for your peripherals. The integrated carrying handle makes the Z20 Mesh perfect for easy transport – ideal for LAN parties, events, or flexible setups.
The CORSAIR iCUE LINK 2500X RGB mid-tower is a marvel of system cabinet design, blending functionality with aesthetic appeal. This chassis supports a wide range of motherboards, from Mini-ITX to microATX, and accommodates video cards up to 400 mm in length, ensuring compatibility with gaming setups. The case's cooling system offers various configurations for fans and radiators to keep your components at optimal temperatures. With a tempered-glass side panel, your system's RGB lighting and meticulous build are on full display, complemented by the ease of cable management thanks to its dual chamber layout. Whether for gaming, content creation, or everyday use, the CORSAIR iCUE LINK 2500X RGB offers a solid foundation for any PC.
Mid-tower with panoramic view, supports GPUs up to 415 mm, CPU coolers up to 184 mm, and motherboards up to E-ATX, featuring a back-connect design With the Phanteks XT View Matrix, you can build a tidy and well-thought-out gaming PC. The case features two large tempered glass panels without a center bar, giving you an unobstructed view of your hardware. It supports current components such as E-ATX motherboards, large graphics cards, and offers plenty of options for fans and radiators. Perfect for anyone seeking a clean setup: boards with rear connectors like ASUS BTF, MSI Project Zero, or GIGABYTE Project STEALTH fit perfectly. The highlight is the integrated matrix display with 600 LEDs, which can be customized in many ways. Plenty of space for high-end hardware: Supports Mini-ITX to E-ATX Generous GPU compatibility: Graphics cards up to 415 mm in length Strong airflow: Up to nine fans and three radiators Panoramic view: Large glass surfaces without obstructive bars 600-LED matrix: Displays, effects, and animations possible Phanteks XT View Matrix: Made for current gaming hardware The XT View Matrix PC case offers plenty of room for your ideal build: Mini-ITX to E-ATX boards fit easily, including motherboards with rear connectors. The 184 mm CPU cooler height allows the use of large air coolers. Thanks to seven PCIe slots and 415 mm of space for graphics cards, you can install even the largest GPUs without any issues. A clear look through glass and clean cable management The glass front and glass side are completely free from bars, providing you with a 270-degree view of your hardware. Smart cable management makes it easy to hide all necessary cables, ensuring unobstructed airflow and a stunningly clean look. A standout feature is the integrated LED panel with 600 LEDs. Hidden behind a fabric surface, it displays system information, time, text, or animations, giving your PC a personalized touch. Great flexibility for fans and radiators You can install up to nine 120 mm fans and three radiators. Whether you prefer air or water cooling, you can design your system exactly as needed. Strong cooling, perfect for high-performance hardware Top: three 120 mm fans or two 140 mm fans / radiator up to 360 mm Side: two 120 mm fans or 240 mm radiator (requires vertical GPU) PSU chamber: three 120 mm fans for direct GPU ventilation Rear: 120 mm radiator or 120/140 mm fan This setup keeps your PC stable even under heavy load – whether cooled by air or water. NEXLINQ: Easy control for cooling & lighting The XT View Matrix is part of the Phanteks NEXLINQ system. With this system, you connect fans, coolers, and RGB lighting to a hub and conveniently control everything via software. You can set automatic or custom fan curves and adjust your lighting colors – for quiet operation and a cohesive look. Mid-tower supporting back-connect motherboards The case supports motherboards from Mini-ITX to E-ATX, including models with back-connect such as ASUS BTF, MSI Project Zero, and GIGABYTE Project STEALTH. This keeps the interior especially tidy. Modular I/O panel The I/O panel is located on top of the case. This allows the case to fit perfectly on your desk and gives you easy access to the ports.
Darkflash B351 Computer CaseThe Darkflash B351 is a minimalist computer case with over 10 years of industry experience. It features a modest yet elegant design and exceptional heat dissipation properties thanks to well-placed ventilation slots. With its spacious interior, you can easily accommodate all the necessary components for your computer without worrying about space constraints.Wide CompatibilityFurthermore, the Darkflash B351 stands out with its wide compatibility, making it suitable for various motherboard types, including ATX (305 x 244mm), M-ATX (244 x 244mm), and ITX (170 x 170mm). Moreover, you can install a graphics card with a maximum length of 345mm, giving you flexibility in choosing components. Made from high-quality steel, you can be confident that this case will serve you well for a long time while maintaining its quality.Front PanelThe front panel of the Darkflash B351 case not only looks elegant with its vertical vents but is also functional. The Power and Reset buttons, as well as USB 2.0 x 2, USB 3.0 ports, and audio inputs, are arranged in a single line, giving the case a clean appearance and providing easy access to ports and buttons, which is particularly useful in everyday use.Hard DrivesWhen it comes to hard drive placement, the Darkflash B351 offers the user many options. You can freely customize the internal layout to suit your preferences and needs, regardless of how many hard drives you want to install. This is another advantage of this case that allows you to make better use of space and optimize your computer configuration.SpecificationsBrand Darkflash Model B351 Material SPCC 0.5MM Motherboard ATX / M-ATX / ITX Case Size 395 x 200 x 440mm Equipment Size 350 x 185 x 425mm HDD & SSD 1 / 4 PCI Slots 7 VGA Card Max 345mm CPU Cooler Max 155mm Power Supply 140mm Input/Output Power, reset, USB3.0 x 1, USB2.0 x 2, HD Audio Cooling System Front: 120mm x 1, rear: 120mm x 1
Zalman P30 V2 micro-ATX Case with Tempered Glass and Panoramic View - White The Zalman P30 V2 micro-ATX case in elegant white combines a modern design with high functionality, ideal for PC enthusiasts and gamers. The Panoramic View side panel made of tempered glass shows off your components in all their glory and gives the setup a clean, minimalist look. The V2 version comes with optimized features and improved cooling performance for demanding builds. Key features of the Zalman P30 V2 case in white: Panoramic Tempered Glass Side Panel : Provides a complete view of the hardware and showcases it in style. Compact micro-ATX format : Perfect for micro-ATX and mini-ITX motherboards, ideal for powerful builds in a small footprint. Improved cooling performance : Support for multiple fans and water cooling for efficient heat dissipation and reliable operation. Modern white finish : Matches minimalist and bright setups and gives the system a fresh, timeless look. The Zalman P30 V2 case in white is the perfect choice for those who value aesthetics and efficiency. The combination of panoramic view, high-quality tempered glass and the elegant white design make it the ideal choice for sophisticated and style-conscious PC builds.
FULL ATX 3X14CM FANS NOISE ABSOR A new Full-ATX Case with aluminum front panel and great airflow, silence and plenty of space for a whole lot of HDD's and opticals...
Mini-ITX case as well as M-ATX case in white, for motherboards in Mini-ITX or M-ATX format, eight different installation possibilities, external IO hub, mesh grille for improved airflow, up to seven 120 mm fans, and two simultaneous 360 mm radiators.
Midi-Tower PC case in ATX form factor, made of steel and plastic, foldable side panel with magnetic closure, front made of fine mesh, GPU support up to 330 mm, suitable for 360 mm radiator
Limited Metaphor: ReFantazio edition of the Y70, featuring panoramic glass with four character designs, vertical GPU with PCIe 4.0 riser, powerful cooling, and a dual-chamber design The HYTE Y70 Metaphor: ReFantazio Edition is a limited showcase case for fans of Metaphor: ReFantazio and discerning PC enthusiasts. It combines the renowned Y70 design with character artwork of the four protagonists, premium materials, and maximum hardware compatibility. Limited Metaphor: ReFantazio Edition with four character designs Three-piece panoramic glass beautifully displays hardware and graphics card Vertical GPU mounting with PCIe 4.0 riser for a clean look and optimal presentation Dual-chamber interior separates hardware and cables for improved airflow Extensive cooling options for air and water cooling—even for high-end systems Limited design for Metaphor: ReFantazio fans The Metaphor: ReFantazio Edition features detailed character graphics and a subtle burgundy design on the Y70 case. Gold accents and lettering emphasize the elegant appearance. The panoramic glass makes this case a highlight in any desk setup. Ample space for powerful hardware The Y70 supports motherboards up to E-ATX and can accommodate graphics cards up to 422 mm in length. With support for 4-slot GPUs, there’s also room for particularly large graphics cards. CPU coolers up to 180 mm and power supplies up to 235 mm fit easily inside the case. Strong cooling and thoughtful design Support for up to ten fans or multiple 360 mm radiators ensures efficient cooling. The dual-chamber design streamlines cable management and keeps the showcase area tidy. Tool-less panels and modular mounts make assembly and maintenance especially convenient.
The TR300 WS Mid-Tower Case is an ATX case with a front-mounted power supply for optimal space utilization, supporting AIO water cooling solutions up to 360 mm for maximum cooling performance. It accommodates up to eight 120 mm fans and supports a radiator up to 360 mm on the top, enabling flexible cooling solutions. The case supports Mini-ITX, Micro-ATX, and ATX motherboards; the power supply can be installed at four mounting points inside the case depending on the motherboard size. Maximize the visual impact of your TR300 WS Mid Tower Case by upgrading with our LCD Screen Kit. The 6-inch LCD display allows you to monitor real-time information and upload any images or GIFs for extra flair with the latest TT RGB Plus software. Removable dust filters help keep your system clean while providing optimal airflow. For maximum storage compatibility, the case supports up to two 3.5-inch HDDs and three 2.5-inch SSDs for flexible installation.
The CORSAIR 2000D AIRFLOW Black mini ITX is a compact computer case designed for small form factor builds. It has excellent airflow and can accommodate a mini ITX motherboard. The case has a sleek black design and is made by the popular brand Corsair.
