Small case for simple systems Two fans installed Supports ITX size motherboards and CPU cooler height up to 38 mm Up to four 2.5-inch SSDs possible Power supply: 1U Flex up to 150 mm The Jonsbo N10 in detail The Jonsbo N10 is a small case that can be placed on the desk due to its light weight and fits into any setup thanks to its simple silver design. Cooling The mini-tower already comes with two small fans installed, providing sufficient cooling. Additional fans cannot be installed. For this reason, the tower does not support the installation of graphics cards, as these require more cooling. Nevertheless, a processor with integrated graphics can be installed without any problems. Hardware options The mini-tower supports the installation of ITX size motherboards. The CPU cooler should not exceed a height of 38 mm. To store programs and games, up to four 2.5-inch SSDs can be installed. For the power supply, note that only a 1U Flex power supply is possible, which should not exceed 150 mm in length.
LANCOOL III Mid-tower modular chassis for all kinds of configurations Equipped with 4 × 140 PWM fans (ARGB or non-RGB) Featured airflow optimized mesh structure and hinged side panels Supports up to 420 radiator or 3 x 360 radiators and a maximum of 10 fans Offers 12 storage drives mounting locations Upgraded cable management solution for a clean build
The Phanteks XT M3 impresses with a space-saving design that offers you more than enough room for high-end components. With effective cooling and tidy cable management, this case is suitable for everyone—whether you are a casual gamer or an enthusiast. Compact Size: Space-saving case for high-end hardware Effective Cooling: Space for up to nine fans Large Radiator: Supports installation of a 360 mm radiator on the top panel Organized Build: Space for neat cable management Back-Connect Support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SFF case designed for greatness. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 case with fans Effectively cooled with fans and radiator The Phanteks case supports the installation of up to nine fans, keeping your build cool under any workload. You can mount three fans on the bottom, directly below the graphics card, to provide extra cooling for your GPU. A 360-mm radiator can also be mounted on the top if you prefer water cooling. In addition to fans and a radiator, the mesh front panel ensures excellent airflow, reducing heat buildup inside your case. Your new gaming PC with clean cable management Laying out cables neatly is not always easy—but with the Phanteks XT M3, cable management becomes effortless. Cutouts in just the right places allow for tidy cable routing. Combined with support for motherboards with a back-connect design, you get an organized build that not only looks great but also improves airflow. Mini-ITX case built for powerful hardware Even a large graphics card fits in easily—the case provides space for a GPU up to 430 mm long. Note that you cannot install fans at the front if you utilize the full length. The CPU cooler should not exceed 175 mm in height, and the power supply should be no longer than 150 mm.
The Phanteks XT M3 impresses with a space-saving design that offers you more than enough room for high-end components. With effective cooling and tidy cable management, the case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact size: Space-saving case for high-end hardware Effective cooling: Space for up to nine fans Large radiator: Supports installation of a 360 mm radiator on the top Tidy build: Room for excellent cable management Back-connect support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini-case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SFF case built for big things. Compatible with high-end graphics cards and motherboards supporting back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports the installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360-mm radiator can be fitted on top if you prefer water cooling. Besides fans and a radiator, the mesh front also ensures very good airflow. This helps prevent hot air from accumulating inside your case. Your new gaming PC with clean cable management Managing cables neatly is not easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also improves airflow. Mini-ITX case built for powerful hardware Even a large graphics card fits in effortlessly—the case offers space for a GPU up to 430 mm in length. Note that you cannot install fans at the front if you use the maximum GPU length. The CPU cooler should not exceed a height of 175 mm, and the power supply should not be longer than 150 mm.
Micro-ATX case, innovative front-mounted power supply, supports GPUs up to 430mm, space for up to seven 120mm fans, separate radiator chamber, glass panels on the front and side, includes three 120mm reverse fansThe Phanteks XT V3 combines compact design with ample room for modern hardware. With stylish glass panels and powerful cooling, your gaming setup becomes a true showcase. Compact Micro-ATX case: ideal for modern builds Ample space: supports GPUs up to 430mm in length Optimized for cooling: up to seven 120mm fans or a 360mm radiator Compatible: with back-connect motherboards Showcase design: tempered glass panels on the front and side The Phanteks XT V3: Compact Mini Case with Plenty of Space Phanteks XT V3 Case Thanks to its compact form factor, the Phanteks XT V3 can be easily integrated into a wide range of gaming or professional setups—while still providing excellent support for modern hardware. The spacious interior offers room for Mini-ITX and Micro-ATX motherboards and supports back-connect motherboards. Additionally, high-performance graphics cards fit with ease, as the Phanteks XT V3 features four PCIe slots and accommodates GPUs up to 430mm. The rear chamber of the case also impresses with an innovative design for premium hardware. Instead of the usual position, the power supply has been relocated to the top front. This allows the Phanteks XT V3 to support full-sized ATX power supplies, providing even greater compatibility. Powerful Cooling Phanteks XT V3 The Phanteks XT V3 delivers outstanding cooling performance. There are seven mounting points for 120mm fans – three at the top, three at the bottom, and one at the rear – allowing for efficient airflow configurations. Out of the box, three powerful M25-120 reverse DRGB fans are pre-installed at the bottom, ensuring strong cooling. Additionally, the Phanteks XT V3 features a dedicated top chamber for a 360mm radiator. This makes it easy to install a powerful AIO cooler, keeping even high-end CPUs reliably cool during intense gaming sessions. Showcase Case Phanteks XT V3 With the Phanteks XT V3, you can display both your hardware and your building skills. The rear chamber provides plenty of space for cable management along with smart routing options for a clutter-free system. Completing the look are tempered glass panels on the front and side, giving you an unobstructed view of your components from every angle. Comprehensive I/O Panel Phanteks XT V3 The Phanteks XT V3 provides outstanding support for your gaming setup, thanks to the front I/O panel located at the bottom right. Here, you’ll find both a USB Type-A and Type-C port with USB 3.2 Gen 2x2 standard. Additionally, a 3.5mm combo audio jack is available for connecting your gaming headset.
Volcano Space XL Full Tower Case white Youre investing in a top-tier processor, a powerful graphics card, fast RAM, and a solid motherboard, so why would you hide them from yourself and other household members? The MODECOM Volcano Space XL Full Tower is a case designed so that your computer can finally look truly impressive. The front and side tempered-glass panels create a full visual showcaselike hardware displayed in a glass cabinet. Every detail, every ARGB effect (if you install illuminated fans), and every line of your configuration is visible and highlighted by this majestic chassis. MODECOM Volcano Space XL was designed for those who love personalization and perfect internal cable management, while also needing a spacious Full Tower case. Support for motherboards with reversed connectors allows you to build a modern interior without having to expose cables. Thanks to snap-on panels, you gain quick access to the inside. Installing components, upgrading hardware, and cleaning the interior become even easier. The spacious interior gives you full freedom: large E-ATX boards, robust water cooling (up to 420 mm), long graphics cards, and all the components you need for your gaming setup. With the MODECOM Volcano Space XL, your computer will know no limitsand it will look exactly the way it deserves. If you love technology, need plenty of room for expansion, and want your hardware always within sight, the MODECOM Volcano Space XL Full Tower is made for you. Especially in the Volcano Space XL NF version, which gives you complete freedom to configure cooling according to your preferences, as it comes without pre-installed fans. Because bigger can do more.
Volcano Space XL Full Tower Case black Youre investing in a top-tier processor, a powerful graphics card, fast RAM, and a solid motherboard, so why would you hide them from yourself and other household members? The MODECOM Volcano Space XL Full Tower is a case designed so that your computer can finally look truly impressive. The front and side tempered-glass panels create a full visual showcaselike hardware displayed in a glass cabinet. Every detail, every ARGB effect (if you install illuminated fans), and every line of your configuration is visible and highlighted by this majestic chassis. MODECOM Volcano Space XL was designed for those who love personalization and perfect internal cable management, while also needing a spacious Full Tower case. Support for motherboards with reversed connectors allows you to build a modern interior without having to expose cables. Thanks to snap-on panels, you gain quick access to the inside. Installing components, upgrading hardware, and cleaning the interior become even easier. The spacious interior gives you full freedom: large E-ATX boards, robust water cooling (up to 420 mm), long graphics cards, and all the components you need for your gaming setup. With the MODECOM Volcano Space XL, your computer will know no limitsand it will look exactly the way it deserves. If you love technology, need plenty of room for expansion, and want your hardware always within sight, the MODECOM Volcano Space XL Full Tower is made for you. Especially in the Volcano Space XL NF version, which gives you complete freedom to configure cooling according to your preferences, as it comes without pre-installed fans. Because bigger can do more.
Mit seinem stilvollen Stoffüberzug unter dem Seitenteil und der Front aus gehärtetem Glas, verleiht das AK7 ARGB deiner Gaming-Hardware eine besonders elegante Note. Mit vier vorinstallierten ARGB-Lüftern und einem durchdachten Lufteinzug über die Seite ist neben der Optik auch für einen jederzeit berauschenden Airflow gesorgt. Das ATX-Gehäuse bietet zudem moderne Anschlüsse, eine breite Kompatibilität mit BTF-Mainboards und jede Menge Platz für leistungsstarke Technik. Das AK7 ARGB setzt mit einer modernen Glasoptik Hardware perfekt in Szene. Ein besonders edler Touch wird ihm zusätzlich durch den stilvollen Stoffüberzug an der Unterseite verliehen. Im AK7 ARGB sind bereits vier 120-mm-ARGB-PWM-Lüfter verbaut, von denen drei invertiert sind, um die Luft von der Seite ins Gehäuse zu saugen und so für einen optimalen Airflow zu sorgen. Das Gehäuse bietet dabei Platz für insgesamt bis zu neun Lüfter. Wer sein AK7 ARGB mit einer Wasserkühlung betreiben möchte, kann dies selbstverständlich tun und neben einem 360-mm-Radiator sogar einen weiteren Radiator von bis zu 280 mm unterbringen. Das AK7 ARGB ist nicht nur mit herkömmlichen Mini-ITX-, Micro-ATX- und ATX-Mainboards kompatibel, sondern unterstützt auch nahezu alle BTF-Formate. Für eine breite Anschlussvielfalt sorgt das AK7 ARGB mit modernen TRRS- und USB-C-Anschlüssen. Eine RGB-Steuerung ermöglicht zudem den Anschluss von bis zu vier LED-Elementen und vier PWM-Lüftern. Mit einer maximalen Grafikkartenlänge von 410 mm bietet das AK7 ARGB auch Platz für große Karten, die durch einen gummierten Grafikkartenhalter zusätzlich gestützt werden. CPU-Kühler können eine Höhe von bis zu 170 mm und Netzteile eine Länge von bis zu 235 mm haben. Zudem finden bis zu zwei 3,5“-HDDs oder vier 2,5“-SSDs im Gehäuse Platz.
Das Hyte Y70HYTE Y70 HSR Firefly ist ein verbessertes, modernes, ästhetisches ATX-Mid-Tower-Gehäuse mit zwei Kammern, das Gaming-Erlebnisse der nächsten Generation mit massiven vertikalen 4 Steckplätzen bietet und maximale Leistung durch enorme Kühlkapazität ermöglicht. Gleichzeitig feiern Sie Ihre Lieblingshardware, indem Sie Ihren PC so präsentieren, wie er gesehen werden sollte. Im Lieferumfang des Gehäuses ist ein luxuriöser PCIE 4.0 x 16-Riser mit einer farblich abgestimmten Haube für einen ununterbrochenen visuellen Fluss enthalten, der für eine schmerzlose GPU-Installation und einen reibungslosen Build-Prozess sorgt. Es ermöglicht auch eine Fülle von PCIE-Karten mit halber Höhe, die hinter dem Thron der vertikalen Grafik sitzen. Ein geräumiger Innenraum bietet Platz für einen bis zu 360 mm langen und 125 mm dicken Heizkörper an der Seite und eine verstellbare obere Halterung, die oben einen 360-mm-Kühler mit einer Dicke von bis zu 68 mm aufnehmen kann. Zusammen mit der kalten Bodenkühlung an der Unterseite und einem zusätzlichen Lüfter an der Rückseite des Gehäuses verfügt das Y70 über eine Gesamtkapazität von 10 Lüftern in einem vollständig bestückten Gehäuse. Mit über 180 mm Abstand zum Seitenglas werden Enthusiasten von Luft- und Wasserkühlung gleichermaßen die Flexibilität zu schätzen wissen, die ihnen das Gehäuse bietet, um die robustesten Kühlkonfigurationen zu schaffen, die möglich sind.
The Viewport Mini, in its elegant black version, is a mini-tower case featuring front and side panels made of tempered glass, providing a panoramic view of the high-performance interior components. It supports Micro ATX and Mini-ITX motherboards and offers advanced cooling options with 7 fan slots and liquid cooling compatibility for 240/280 mm and 120 mm radiators. The included ARGB fans draw air in through mesh ventilation to optimize airflow. Ideally suited for gaming and high-performance applications, it accommodates GPUs up to 355 mm and CPU coolers up to 165 mm.
The CHIEFTEC BW-01B-OP is a high-performance ATX workstation case that combines a timelessly elegant front panel with a modern door design and functional front I/O, including a USB Type-C port. It comes pre-installed with a 120mm PWM-HDB fan, ensuring quiet and long-lasting operation. An easily removable drive cage system allows for flexible use and meets the requirements of digital content creators as well as their long-term data storage needs. Cable management openings with rubber grommets provide a tidy build and efficient airflow. Designed for modern workstation systems, the BW-01B-OP combines performance and style in an elegant, professional case.
MC-CUBE MicroATX case Panoramic design in ultra-compact cube format and ARGB illumination.The MC-CUBE takes the compact case concept to another level with a cube-like design. Equipped with 1 ARGB 120mm rear fan with multiple preset lighting effects and ARGB sync cable and continuous tempered glass on the front and side, the MC-CUBE combines aesthetics and functionality in a chassis designed to maximize space. It also offers compatibility with MicroATX and Mini-ITX motherboards, support for 120mm liquid cooling, capacity for up to 5 120mm fans and USB-C, USB 3.0 and HD Audio connectivity. Panoramic tempered glass Ultra-compact cube format 120mm ARGB rear fan included Advanced connectivity with USB-C Cube format with panoramic designInnovative cube-like design, with compact dimensions that give it a personality of its own in any configuration. The continuous tempered glass on the front and side creates a spectacular panoramic effect that enhances the interior of the equipment and elevates your setup.ARGB LIGHTINGThe MC-CUBE incorporates 1 ARGB 120mm rear fan with multiple predefined lighting effects and cable for synchronization with motherboards and ARGB controllers, allowing to integrate the chassis lighting with the rest of the system components.Efficient coolingThe MC-CUBE offers a solid base to keep the temperature under control. With a rear fan included, it allows up to 5 x 120mm fans to be installed and supports liquid cooling up to 120mm, as well as supporting CPU heatsinks up to 163mm.Optimized compact designIts compact design allows Micro-ATX and Mini-ITX configurations to be assembled making the most of the space available, without sacrificing a functional, tidy interior layout, ready for convenient assembly.Hardware compatibilityDesigned for compact and functional configurations, the MC-CUBE offers optimized compatibility to build a high performance computer Graphics cards up to 260mm CPU coolers up to 163mm Up to 5x 120mm fans Liquid cooling up to 120mm Compatible with Micro-ATX and Mini-ITX boards Space for 2 x 2.5" SSD and 1 x 3.5" HDD Double chamber and easy maintenanceThe dual-chamber structure separates the power supply and cabling from the main components, promoting cleaner assembly and better interior organization. In addition, it incorporates a top magnetic dust filter that helps protect the interior and facilitates the daily maintenance of the equipment.Connectivity and quick accessIntegrates USB-C, USB 3.0 and HD Audio on the top panel for convenient connection of peripherals, headphones and other commonly used devices.
The Fractal Design Define R5 is the next evolution in the widely popular Define Series. Packed with intelligently designed enthusiast-oriented features delivering a silent case with powerful and expansive air and liquid cooling ...
The IT-5905 is a modern Midi-Tower with a robust and compact design. It knows to convince due to its user-friendly assembly of front connectors in the upper part of the front panel.Besides the design, the IT-5905 convinces with space for up to four optional coolers, several mounting options for 3.5" and 2.5" HDD´s and space for graphics cards with a length of 32cm.Two USB 3.0 front connectors and a depot in the cap (for USB-sticks for example) complete the offer and make this case a real all-rounder.KujutegurMiditornTüüpPC5,25" lahtrite arv33,5" lahtrite arv4Emaplaadi toetatud kujuteguridATX,Micro-ATXToote värvMustAknagaJah2,5" salvede arv2Sisemiste 3,5" salvede arv3Väliste 5,25" kettalahtrite arv3SobilikKodu/kontorGraafikakaardi maksimaalne pikkus32 cmKaasas toiteplokkEiUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahMaksimaalne esiventilaatorite arv1Toetatud esiventilaatorite läbimõõt120 mmMaksimaalne küljeventilaatorite arv2Toetatud küljeventilaatorite läbimõõt120 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt80,120 mmToetatud kõvakettasuurused2.5,3.5"JuhtmehaldusJahLähtestusnuppJahLaius200 mmSügavus415 mmKõrgus410 mm
Beautifully crafted and engineered to maximize cooling potential with its amazing expansion flexibiltiy, the Enthoo Pro is the budget friendly full-tower from Phanteks. Embracing many features from the Enthoo Primo, without the price tag. This case has multiple radiator support, removable SSD bracket, closed HDD panel, and velcro cable management. The Enthoo Pro, trying to establish its own solid reputation like the award winning Enthoo Primo.KujutegurFull-TowerTüüpPCMaterjalPlast, Teras5,25" lahtrite arv33,5" lahtrite arv6Emaplaadi toetatud kujuteguridATX,EATX,Mini-ATXToote värvMustAknagaJah2,5" salvede arv7Sisseehitatud kõlar(id)EiCPU jahuti maksimaalne kõrgus19,3 cmGraafikakaardi maksimaalne pikkus47,2 cmKaasas toiteplokkEiToiteploki asukohtPõhiUSB 2.0 portide arv2USB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahInstallitud esiventilaatorid1x 200 mmMaksimaalne esiventilaatorite arv2Toetatud esiventilaatorite läbimõõt120,140,200 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt120,140 mmMaksimaalne ülemiste ventilaatorite arv3Toetatud ülemiste ventilaatorite läbimõõt120,140,200 mmMaksimaalne alumiste ventilaatorite arv2Toetatud alumiste ventilaatorite läbimõõt120,140 mmVentilaatori kiirus1200Toetatud kõvakettasuurused2.5,3.5"Integreeritud kaardilugejaEiJuhtmehaldusJahLähtestusnuppJahLaius235 mmSügavus550 mmKõrgus535 mmJuhendJahKasutusjuhendJahPakendi kaal11,9 kg
Classic 19" Rack with a lot of space for different drivesYou can remove the HDD cages with a few steps for easy mounting of internal devices.5 mounting slots with full height and the possibility to mount an ATX PSU ensures a professional and cost efficient solution.The lockable doors in front of the slots prevent, unauthorized access.Integrated air filters ensure clean air and a flawless cooling.KujutegurPüstikTüüpServerMaterjalTeras5,25" lahtrite arv43,5" lahtrite arv5Emaplaadi toetatud kujuteguridATX,Micro-ATX,uATX,Mini-ITXToote värvMustAknagaEi2,5" salvede arv2Sisemiste 3,5" salvede arv5Väliste 5,25" kettalahtrite arv4Püstikmontaaž3UMaterjali paksus1,2 mmSertifikaatRoHS, CEKaasas toiteplokkEiUSB 2.0 portide arv2AudiosisendEiAudioväljundEiInstallitud tagaventilaatorid2x 80 mmMaksimaalne tagaventilaatorite arv2Toetatud tagaventilaatorite läbimõõt80 mmToetatud kõvakettasuurused2.5,3.5"LED-indikaatoridVõimsus, HDDLähtestusnuppJahLaius485 mmSügavus530 mmKõrgus133 mmKaal9,34 kgPakendi laius560 mmPakendi sügavus630 mmPakendi kõrgus225 mmPakendi kaal11,1 kg
No. of drive bays: 9 MOLEX power connectors: 3 Floppy power connectors: 0 SATA power connectors: 5 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 1 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 1 Number of power supply connector 4+4-pin 12V: 0 8-pin 12V power connectors: 0 Dimensions: 368mm x 173mm x 365mm Weight: 4.1
Tootekood: SAVIO Prime X1GTIN: 5901986046318Korpused
No. of drive bays: 4 Dimensions: Product dimension: (L x W x H) 407 x 215 x 455 mm Weight: 6.09 Other features: PCI expension slots: 7 Dust filter: 1 x top, 1 x bottom(PSU) Fans control by: Motherboardremote controllerLED buttonVoice control/ Fans included: 4 x 120 mm ARGB, 6 pin, 1200 RPM (3 x front, 1 x rear) connected to the controller Fan support: front: 3 x 120/140 mm lub 2 x 200 mm rear: 1 x 120 mm top: 2 x 120 (140) mm bottom: 2 x 120 mm Watercooling support: front: 1 x 120/240/360 mm rear: 1 x 120 mm top: 1 x 120/240 mm Product dimension: (L x W x H) 407 x 215 x 455 mm Chassis material: SPCC 0.6 mm Front Panel material: Tempered glass Net/gross weight: 6.09 / 7.14 kg
No. of drive bays: 4 MOLEX power connectors: 2 Floppy power connectors: 1 SATA power connectors: 4 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 0 Number of power supply connector 4+4-pin 12V: 1 8-pin 12V power connectors: 0 Weight: 4.75
