CTE T500 TG ARGB Snow Full Tower Chassis The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support up to a 420mm AIO radiator at the front and a maximum 360mm AIO radiator at the rear. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE T500 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE T500 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. Experience the perfect combination of design and performance with our CTE T500 The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support a maximum of a 420mm AIO radiator at the front and a maximum of two 360mm AIO radiators at the front and rear. There's plenty of room to install cooling components, including front and rear fan brackets, top and right fan vents, bottom fan vent, and shroud vent, and the case can accommodate up to eleven 140mm/120mm fans. Other cool details include removable filters, pump and tank support, and Velcro straps for easy cable management. Our CTE T500 Snow is the perfect choice whether you're looking for a custom liquid cooling setup or a dual AIO setup! Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE T500 TG ARGB's versatile interior features two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Support for dual 360mm radiators Our CTE T500 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, allowing users to install up to two 360mm radiators simultaneously at the front and rear. To ensure AIO compatibility, users can install up to one 420mm AIO radiator on the front and up to two 360mm AIO radiator on the front and rear. All your dream cooling components will fit! The CTE T500 Full Tower case has a huge fan and cooler installation capacity: up to eleven 140 mm/120 mm fans and 360 mm AIO coolers in various locations (420 mm AIO cooler at the front). Moreover, equipped front and rear fan brackets and mounting locations on the top, right side and lid ensure easy installation of all desired cooling components. Rock your world with three pre-installed white 140mm CT140 ARGB fans The CTE T500 TG ARGB Snow Full Tower case is equipped with three white 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. We've tested everything, so you don't have to At Thermaltake, we always stress test our products under harsh conditions to ensure product quality. CTE T500 TG ARGB Snow Full Tower Chassis products have been tested at 100% full load for 30 minutes, with the highest-end CPU, GPU and motherboard at the time of testing, compared to a consumer-style configuration, which allowed us to test how the chassis handles in real-world situations.
The DIGITUS wall-mounted data communications cabinet is equipped with a glazed door and a cable gland in the roof and floor. The steel structure is made of steel sheet up to 1.5 mm thick. It is possible to change the side of the door hinges and adjust the depth. The rack cabinets are delivered unassembled, in a flat package. Assembly takes place in a few simple steps thanks to the included step-by-step instructions. Installation cabinet supplied unassembled Quick installation Door opening angle: 200° 1-point locking on front door 483 mm (19") rack profiles mounted at the front inside the cabinet, galvanized 483 mm (19") rack profiles with depth adjustment 1.1-1.5 thick, high-strength sheet steel, powder-coated Cable inlet with brush strip in the roof and plastic cover in the floor Ventilation slots for active and passive air supply and exhaust Front door: glass, single Side panels: on two sides Assembled: no
Wall-mountable showcase case, ATX form factor, designed for custom water cooling, vertical GPU mounting, radiator up to 360 mm, graphics cards up to 400 mm in length.
Kompaktes Aluminiumgehäuse für kleine Systeme, perfekt für Cloud-Lagerung oder HomeOffice, I/O-Panel: 1x USB-C 3.1 /1 x USB-A 3.0/ 1x Audio, Platz für 8+1 Laufwerke, 2x vorinstallierte Lüfter
Compact dual-chamber midi-tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case cover for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 on the front panel
Simple mini-tower, includes one Mercury AM120S fan, up to five fans possible, GPUs up to 340 mm / CPU up to 162 mm in height, up to three drives possible, radiator up to 240 mm, 1x USB-C / 2x USB-A
Micro-ATX case for DIY NAS, one fan pre-installed, GPUs up to 230 mm / CPU up to 70 mm height, 6x 3.5 / 2x 2.5 inch drives possible, 1x USB-C / 1x USB-A
The Jonsbo TK-0 Mini-ITX case combines elegant design with impressive functionality. High-quality materials such as aluminum, steel, and a noble walnut wood application give this compact case a unique look. Despite its handy size, it offers enough space for powerful hardware and flexible cooling options – perfect for space-saving setups, gaming sessions, or a stylish workspace. Compact Mini-ITX case made of aluminum, wood, and steel. Walnut wood application ensures a unique look. Ideal for space-saving setups due to its small size. Can accommodate up to two 140 mm and two 90 mm fans. Space for 1x 3.5-inch HDD and 1x 2.5-inch SSD, SFX power supplies up to 160 mm. For graphics cards up to 230 mm in length.
XPG INVADER X. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Placering af strømforsyning: Bund. Understøttede diametre for sideventilatorer: 120 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 245 mm, Dybde: 475 mm, Højde: 448 mm
Portable mini case, up to five fans, motherboards up to Micro-ATX, GPU up to 335 mm, and CPU cooler up to 170 mm height, 1x 3.5-inch or 2.5-inch drive, with carrying handle
Showcase your hardware perfectly with the Phanteks Evolv S2 PC case. The spacious panoramic design with glass front and sides always gives you a clear view of your components—ideal for eye-catching builds with RGB lighting and custom water cooling. Black midi-tower with panoramic design Efficient cooling options with up to seven fans and radiator support up to 360 mm Supports motherboards up to E-ATX size with back-connect design Space for graphics cards up to 395 mm and CPU coolers up to 175 mm in height Clean look thanks to hidden cabling Four integrated RGB fans Phanteks Evolv S2: Midi-tower with panoramic design The Phanteks Evolv S2 midi-tower offers the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it’s the ideal choice for gaming and workstation builds. Optimal cooling with fans and radiators To keep your hardware cool under any load, the Phanteks Evolv S2 can accommodate up to seven fans. The top and bottom each support the installation of three 120 mm fans, while the rear can hold a 120 mm fan. To get you started, four 120 mm fans are already pre-installed—three at the bottom and one at the rear. If you prefer water cooling—whether AiO or custom—you can also install a radiator. The top supports a radiator up to 360 mm in size. Installing your hardware The case supports the installation of graphics cards up to 395 mm in length. Motherboards up to E-ATX format are supported. The new back-connect design motherboards are also compatible, allowing for clean cable management and an upgraded setup. The CPU cooler should not exceed 175 mm in height. Up to four drives can be installed to store your programs and games.
The wall-mounting cabinets of the Dynamic Basic series are made of a robust steel construction. Stability is given due to the welding spots. The side sections are detachable and the installation on the wall is easy so it can be implemented quickly. Due to their flexibility the cabinets are ideal for all current IT and telecommunication applications.
