Internal 2x 2.5 "/ 3.5" (cross, drive rails), 2x 2.5 ", Front I / O 1x USB-A 3.0, 2x USB-A 2.0, 1x headphones, 1x microphone, PCI slots 7, Fan (front) 2x 120mm or 3x 120mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 120mm (optional), Fan (other) 2x 120mm (optional), Radiator sizes 120 / 240mm front, Motherboard up to ATX, Power supply ATX (max 180mm deep), Power supply position below, CPU cooler up to max. 156mm height, Graphic cards up to max. 330mm, Color black, inside black, Dimensions (WxHxD) 189x451x412mm, Volume 35.12l, Weight 4.00kg, Special features cable management, dust filter, W/O PSU
Product kirjeldus: Zalman Z3 Iceberg - MDT - extended ATX Product Type: System cabinet Form Factor: Mid Torn värv: valge I/O Ühendusi: 1 x USB 2.0 2 x USB 3.0 1 x kõrvaklapid 1 x microphone Supported Motherboards: ATX, microATX, Mini-ITX, Extended ATX System Cabinet Features: Front dust filter, toetab 120 mm radiator in rear, tempered glass side panel, bottom dust filter, toetab 120/240 mm radiator in top, top magnetic dust filter, toetab 120/240/280/360 mm radiator in front panel Power Device: No toiteplokk mõõtmed (WxDxH): 21 cm x 41 cm x 48 cm kaal: 6.4 kg
Kompaktes Mini-ITX-Gehäuse, viel Mesh für optimierten Airflow, Platz für 280er Radiatoren, 4-Slot-GPUs bis 336 mm, für ATX- oder SFX-Netzteile, bis zu sieben 2,5-Zoll-Laufwerke möglich
MÕÕTMED: 215 x 473.5 x 454 EMAPLAADI TUGI: Mini ITX; Micro ATX; ATX GRAAFIKAKAARDI PIKKUS KUNI: 405 mm PROTSESSORI ÕHKJAHUTI KÕRGUS KUNI: 170 mm TOITEPLOKI ÜHILDUVUS: ATX; 17 cm KAABLITELE RUUM: Olemas KAAL: 7.2 kg Ühenduvus I/O PANEEL: 1 x headphones; 2 x USB 3.0; 1x microphone PCI PESASID KUNI: 7 Kettasahtlid: 4x 2.5" pesa 3x3.5" Ventilaatoritugi: ÜLESSE PAIGALDATUD - 1x Aspect 12 RGB ETTE PAIGALDATUD -2x Aspect 12 ÜLESSE VÕIMALIK PAIGALDADA 2x120/140 TAHA VÕIMALIK PAIGALDADA 1x120 ETTE VÕIMALIK PAIGALDADA 2x120/140 Radiaatoritugi: ÜLEVAL - 240 mm
Water cooling The housing is suitable for water cooling installation. At the top of the case there is space for a radiator up to 360 mm. The same size cooler will also fit in place of the factory-installed fans on the front of the case. The same cooler (360 mm) can also be mounted on a dedicated frame of the motherboard wall, but its thickness cannot be greater than 52 mm. At the back, there is space for 120/140 mm water cooling. The introduced solutions are intended to create a real gaming machine for every game. And all this in a solid, airy construction. Without screws The times when you had to unscrew panels are long gone. In the Volcano Expanse case, we offer pleasant and simple solutions so that you can build your dream computer with a smile. All panels are mounted with snaps - you don't need any tools to remove the panel and conveniently install the components. Need to add RAM sticks? Blow out the dust from the interior? You can remove the panels with a smooth movement of your hand without having to unscrew them. Controller The case is equipped with an ARGB fan controller. Thanks to this, you can manage their speed and backlight. A total of 9 fans can be connected. At your fingertips The panel with USB/Audio inputs is placed at the top of the case, giving you convenient access to the connectors when the case is placed under the desk. There are 2 USB 3.0 connectors and one USB-C connector on the panel. Classically, there is also a microphone and headphone input, as well as a power button and fan control. Dust filter There is a dust filter under the power supply. You can easily remove and install the filter, which will keep your computer clean while increasing the efficiency and safety of the power supply and other installed components. It was designed for ease of assembly and disassembly, which is facilitated by structural elements equipped with magnets. Access to the filter is possible both from the front and back of the housing. Dust filters are also installed on the top and side panels. A place for your favorite games There will be plenty of space for your favorite games. The housing allows the installation of two 2.5 drives on the motherboard tray. Additionally, you can install two 3.5 mm in the power supply tunnel. With this amount of disk space, you can easily plan to install new games. Removable caps and vertical GPU mounting All PCI/PCIe expansion card caps are removable. Players will also appreciate the possibility of vertically mounting the graphics card, because the metal frame in which the caps are placed can be unscrewed.
Classic 19" Rack with a lot of space for different drivesYou can remove the HDD cages with a few steps for easy mounting of internal devices.5 mounting slots with full height and the possibility to mount an ATX PSU ensures a professional and cost efficient solution.The lockable doors in front of the slots prevent, unauthorized access.Integrated air filters ensure clean air and a flawless cooling.KujutegurPüstikTüüpServerMaterjalTeras5,25" lahtrite arv43,5" lahtrite arv5Emaplaadi toetatud kujuteguridATX,Micro-ATX,uATX,Mini-ITXToote värvMustAknagaEi2,5" salvede arv2Sisemiste 3,5" salvede arv5Väliste 5,25" kettalahtrite arv4Püstikmontaaž3UMaterjali paksus1,2 mmSertifikaatRoHS, CEKaasas toiteplokkEiUSB 2.0 portide arv2AudiosisendEiAudioväljundEiInstallitud tagaventilaatorid2x 80 mmMaksimaalne tagaventilaatorite arv2Toetatud tagaventilaatorite läbimõõt80 mmToetatud kõvakettasuurused2.5,3.5"LED-indikaatoridVõimsus, HDDLähtestusnuppJahLaius485 mmSügavus530 mmKõrgus133 mmKaal9,34 kgPakendi laius560 mmPakendi sügavus630 mmPakendi kõrgus225 mmPakendi kaal11,1 kg
Product kirjeldus: Cooler Master MasterBox 500 - mid Torn - extended ATX Product Type: System cabinet Form Factor: Mid Torn Windowed Side Panel: Jah, tempered glass värv: must I/O Ühendusi: 2 x USB 3.2 Gen 1 1 x headphone/microphone Supported Motherboards: ATX, microATX, Mini-ITX, Extended ATX System Cabinet Features: Top panel dust filter, front dust filter, bottom dust filter, toetab 120/140/240/280/360 mm radiator in front panel, toetab 120/140/240/280/360 mm radiator in top, toetab 120 mm radiator in rear panel, ARGB hub Power Device: No toiteplokk (ATX) mõõtmed (WxDxH): 20.9 cm x 50.5 cm x 49.9 cm kaal: 7.7 kg Manufacturer Warranty: 2-year garantii
Elegant Micro-ATX case by Jonsbo in black, subtle design made of steel, with tempered glass side panel, supports graphics cards up to 330 mm, up to 7x 120 mm fans possible
