Tootekood: D32 PRO BLACKGTIN: 6970620554327Korpused
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Unlike the D32 STD, the D32 PRO PC case is aimed at the high-end segment with special and practical features such as Back-Connect or improved front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for Back-Connect motherboards Tempered glass side panel ensures a subtle appearance Plenty of room for cooling solutions allows installation of high-performance hardware Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Black: Space-saving and subtle case for high-end hardware Whether you’re building a midrange HTPC or a high-end PC – the D32 PRO Black from Jonsbo comfortably accommodates all kinds of builds. This minimal case fits graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In Back-Connect mode, the maximum CPU cooler height is reduced by around seven millimeters. This ensures that, even with the case’s compact design, your hardware gets adequate cooling. Working together with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the fans ensure enormous airflow inside the case. No cable clutter with Back-Connect With Back-Connect motherboards like ASUS’s BTF series, MSI’s PROJECT ZERO series, or GIGABYTE’s Stealth series, the case in B-mode—with about six to seven millimeters more space—remains almost completely free of visible cable clutter. Since most power and connection cables can be connected at the back of the motherboard, you save time on cable management and still have a clean look inside your case. Combined with the tempered glass side window, your hardware is always on display in an especially appealing way. Powerful cooling in a small space To ensure your powerful hardware stays adequately cooled in this compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for plenty of airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware always stays cool, even under load. Three dust filters on the front, top, and bottom make sure your hardware stays free from dust and dirt. This keeps your temperatures at optimal levels and, among other things, helps extend your hardware’s lifespan.
Tootekood: D32 PRO MESH BLACKGTIN: 6970620554341Korpused
With the D32 series, Jonsbo targets everyone who wants to build their system in a space-saving manner. Unlike the D32 STD, the D32 PRO PC case is aimed at the high-end segment with special and practical features such as back-connect and improved front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for back-connect motherboards Mesh side panel for a subtle appearance Plenty of space for cooling solutions allows the installation of powerful hardware Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Mesh: Compact and subtle case for high-end hardware Whether midrange HTPC or high-end PC – builds of all types fit comfortably in the D32 PRO Mesh by Jonsbo. The minimalistic case accommodates graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In back-connect mode, only the maximum CPU cooler height is reduced by about seven millimeters. Thus, despite the compact design of the case, adequate cooling for your hardware is ensured. Working with up to six 120 mm fans or one 120 mm and four 140 mm fans, airflow inside the case is enormous. No cable clutter with back-connect With back-connect motherboards, such as those from ASUS’s BTF series, MSI’s PROJECT ZERO series, or GIGABYTE’s Stealth series, the case in B-mode, with approximately six to seven millimeters more space, is nearly free from visible cable clutter. Since most power and connection cables can be plugged in at the back of the motherboard, you save on cable management while still maintaining a clean look inside your case. Powerful cooling in a small space To ensure your high-performance hardware is sufficiently cooled in such a compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans providing sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware stays cool – even under load. Three dust filters at the front, top, and bottom make sure your hardware stays free from dust and dirt. This keeps your temperatures always at an optimal level and also extends the lifespan of your hardware.
Midi-tower case with four pre-installed D-RGB fans 360mm radiator support at the top for optimal cooling performance Compatible with ASUS BTF and MSI Project Zero motherboards Tempered glass side window for an unobstructed view of your components Glacier One 360M25 Gen2 with powerful pump and RGB lighting Three quiet M25-G2 fans with high static pressure Integrated VRM fan on the pump cover High-quality build and optimized airflow Optimal Cooling Meets Stylish Design The XT Pro Ultra offers space for up to ten fans and supports radiators up to 360mm at the top. With four pre-installed 140mm D-RGB fans, it provides excellent airflow right out of the box. The mesh front panel and tempered glass side panel combine functionality with aesthetics. The Glacier One 360M25 Gen2 AiO cooler delivers excellent cooling performance thanks to its powerful pump and three optimized 120mm PWM fans—ideal for high-end Intel and AMD CPUs. Integrated D-RGB lighting ensures a clean yet spectacular look. Room for High-End Components The XT Pro Ultra provides space for graphics cards up to 415mm in length and CPU coolers up to 184mm in height. The case is also ready for vertical GPU mounting and offers enough space for 2x 3.5" and 5x 2.5" drives. ATX and even E-ATX motherboards fit easily as well. Cable-Friendly, Modern Setup Thanks to support for rear-connector motherboards like ASUS BTF and MSI Project Zero, your system can be especially tidy. The Glacier One 360M25 Gen2 supports you with a single control cable for RGB lighting—for a clean build without cable clutter. Quiet & Powerful: The M25-Gen2 Fans The M25-Gen2 fans are designed for radiators and deliver high cooling performance at an ultra-quiet 35.13 dB(A)—with an airflow of 123.55 m³/h and a static pressure of 2.51 mmH2O. Rubber pads prevent disturbing vibrations and the PWM mode automatically adjusts the speed to requirements. With the Phanteks XT Pro Ultra & Glacier One 360M25 Gen2 bundle, you get a perfectly matched combination of case and water cooling, merging performance, cooling, and design at the highest level.
After introducing the RAVEN Z series in 2014 to great acclaim with the revolutionary RVZ01, the RAVEN team has created another segment defining design in the RVZ02. With a volume of only 12 liters, this case is not only slimmer but is actually easier to assemble compared to the RVZ01 or any other slim case before it. Similar to many SilverStone small form factor cases, there is plenty of room for a powerful graphics card up to 13 inches in length available while tool-less drive cages have been implemented to make assembly quicker than ever. With clever space utilization and engineering, two major heat sources of a PC are separated via the chassis’ main chamber so CPU and graphics card can each have their own airflow path. Despite its diminutive size, the RVZ02 is a remarkably versatile case that can be used anywhere from being a compact desktop workstation (in vertical orientation) to a living console or HTPC (in horizontal orientation), making it truly perfect for just about any slim PC build.- Highest performance capability in super slim form factor- Support graphics card up to 13 inches- Mini-ITX motherboard & SFX PSU compatible- Independent expansion slot design for easy assembly- Tool-less drive cage design- Fits in nearly any environment with horizontal or vertical orientationKujutegurSmall Form Factor (SFF)TüüpPCMaterjalPlast, TerasEmaplaadi toetatud kujuteguridMini-ITXToote värvMust, HõbeAknagaJah2,5" salvede arv2SobilikKodu/kontorMahutavus12 lLaienduspesade arv2CPU jahuti maksimaalne kõrgus5,8 cmGraafikakaardi maksimaalne pikkus33 cmToetatud elektritoite tarne vormi faktoridSFXToiteallikate arv1USB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahToetatud kõvakettasuurused2.5,3.5"Toetatud kõvaketaste arv2Laius380 mmSügavus370 mmKõrgus87 mmKaal3,3 kg
Ultrakompaktes Thin-Mini-ITX-Gehäuse, mit Rackmount-Frontblende, aus schwarzem Aluminium gefertigt, OEM-Version ohne Logo, extrem flach & passiv kühlend, zwei 2,5-Zoll-Slots, je zwei USB-3.0/2.0-Ports
The IPC SC-4100 is a case for Mini ITX Mainboards with a quadruple Hot-Swap rack for hard drives.One included 80mm fan, as well as an optional 40mm fan, cares for clean air and therefore for an impeccable cooling system.One Flex ATX or 1HU server power supply can be mounted. The slot opening is suitable for the mounting of a short flat graphic card. One 2.5" hard drive or one SSD can also be mounted. One lockable door completes this total package.KujutegurPüstikTüüpServerMaterjalTeras3,5" lahtrite arv4Emaplaadi toetatud kujuteguridMini-ITXToote värvMustAknagaEiPüstikmontaaž1UMaterjali paksus1 mmSisseehitatud kõlar(id)EiKaasas toiteplokkEiUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendEiAudioväljundEiMaksimaalne esiventilaatorite arv1Toetatud esiventilaatorite läbimõõt40 mmInstallitud tagaventilaatorid1x 80 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt80 mmToetatud kõvakettasuurused2.5,3.5"KäigultvahetusJahLED-indikaatoridJahLähtestusnuppJahLaius194 mmSügavus200 mmKõrgus270 mmKaal2,66 kgPakendi laius315 mmPakendi sügavus245 mmPakendi kõrgus237 mmPakendi kaal3,08 kgKogus aluse kohta4 tk
No. of drive bays: 8 Weight: 6.52 Other features: CPU cooler height limitation: 170mm PSD length limitation: 170mm VGA length limitation: 260mm (With radiator on the right side) 366mm (Without radiator on the right side) Cooling System Front (Intake): 120 x 120 x 25mm Addressable RGB fan (1000rpm, 27.2 dBA) x 3 Rear (exhaust): 120 x 120 x 25 mm fan (1000rpm, 26 dBA) x 1 Fan Support Front: 3 x 120mm Top: 2 x 120mm, 1 x 140mm Rear: 1 x 120mm Right Side(In front of M/B Tray): 2 x 120 mm Bottom(On the power cover): 2 x 120 mm
Cabinet Form Factor: Midi Torn Mainboard Form Factor1Supported Mainboard Form Factor: ATXMicro ATXMini-ITX 3.5-inch Internal Drivesahtleid120mm USB 3.0: 1(USB 3.0 (type A)) USB 2.0: 2 (4-pin USB (type A)) Audio liides1(3.5-mm minijack x 2) Power seadme tüüp: toiteplokk Optional Power Device Location1Lisatarvikud: Screws Chassis Features10 mm kõrgus (mm): 425 mm laius (mm)195 mm Warranty Products Returnable: Jah garantii Term (month)1Box kaal Brutto (kg): 3.86 kg Retail Packaging Netokaal Carton1kg Packs in Box: 1EAN Code: 42604556436341
Ultrakompaktes Thin-Mini-ITX-Gehäuse, mit Rackmount-Frontblende, aus schwarzem Aluminium gefertigt, OEM-Version ohne Logo, extrem flach & passiv kühlend, vier interne 2,5-Zoll-Slots, je zwei USB-3.0/2.0-Ports
Kompaktes Thin-Mini-ITX-Gehäuse von Akasa, 1x 2,5-Zoll HDD/SSD, Vorbereitungen für 4x Serial Port, 2x USB 2.0 Typ A-Buchse, 2x 3,5-mm-Audio-Buchse, VESA-kompatibel
