• Perfectly symmetrical design allows for omnidirectional placement. • Quad 160mm PWM fan support with flexible intake modes. • Integrated base compartment revolutionizes zero-visibility cable management. • Sliding rail system allows for IO module relocation and expanded port array. • Natural alignment of vertically mounted GPU with gravity reduces risk of damage from displacement. • Accommodates a maximum GPU length of 380mm. • Compatible with reverse connector motherboards. • Magnetic dust filter panel and quick release cable management compartment covers make maintenance a breeze.
Midi tower with airflow optimization, mesh front, compatible up to E-ATX, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels, three pre-installed fans The HAVN BF 360 Flow is ideal for gamers and hardware enthusiasts who demand no compromises: solid cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUThree pre-installed fans: 2x 180 mm & 1x 140 mmCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm space – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360 FlowHAVN BF 360 Flow: Airflow meets styleThe front features a distinctive ribbed mesh that draws in air precisely and reduces flow loss. An integrated guide with a 135° angle directs fresh airflow straight onto the GPU and CPU – providing maximum cooling without heat buildup. Flexible mounts for fans or radiators are included, supporting both air and water cooling solutions.HAVN BF 360 Flow side viewCooling power for your high-end hardwareUp to six fans can be installed. The three pre-installed fans deliver plenty of fresh air right out of the box. Alternatively, radiators up to 360 mm can be mounted at the front and top. With a CPU cooler height of 195 mm and a spacious interior, there’s ample room for large air coolers or custom water cooling loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation, even at peak performance.HAVN BF 360 Flow rear side viewCompatibility without compromiseThe BF 360 offers enough space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm clearance for graphics cards – perfect for current RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restriction. Two modular drive trays can accommodate either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 Flow rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you benefit from pre-routed cables, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grips and a practical pull tab – maintenance and upgrades have never been easier.HAVN BF 360 Flow I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re well equipped for the future, whether you’re gaming or working.
• Dual chamber design lets you show off your build while hiding cables, storage drives, and PSU. • Supports up to 400mm GPUs. • Supports a maximum fan capacity of 9 and a 360mm AIO. • Supports Mini-ITX, Micro-ATX and reverse connector motherboards.
MasterFrame 500 Mesh Premium open-frame ATX case designed for modular builds, extreme cooling, and total customization through the FreeForm 2.0 platform. MasterFrame 500 MeshThe MasterFrame 500 Mesh is a premium open-frame mid-tower chassis built for high-performance components, advanced cooling setups, and limitless customization. Embracing the FreeForm 2.0 design philosophy, it supports ATX to E-ATX motherboards and provides full access to modular design files. With enhanced mesh panels for improved airflow, it empowers builders, modders, and creators to push the boundaries of PC design. Versatile & Maker-DrivenIts open source design and interchangeable panels offer endless personalization possibilities, transforming your chassis into a unique expression of style. Flexible Motherboard SupportSupports Mini-ITX to E-ATX motherboards, offering compatibility with a wide range of builds and configurations. Extensive Cooling SupportCan house up to eight fans and multiple radiator sizes (up to 360mm), ensuring superior thermal performance. Ample GPU ClearanceAccommodates graphics cards up to 390mm, offering plenty of space for high-end GPUs. Tool-Free Panel RemovalEasily remove side panels and other components without tools for quick access and modifications during build or upgrades. Included GPU support bracketThe included GPU support bracket prevents GPU sag and ensures stability during intense gaming or high-performance workloads, maintaining a clean and secure build.
PC case Mars MC-INFINIOLITE ATX black The MC INFINIOLITE brings Mars Gaming's "infinity" design to a more accessible form factor, maintaining the premium aesthetics and dual-chamber structure of the INFINIOLITE model, but leaving you total freedom to choose your own cooling. Its frameless continuous curved tempered glass, combined with the glass top panel, offers a spectacular panoramic view of the interior, ideal for gaming or content creation setups looking to excel in both performance and image.
Build Visibility and Hardware Management, Perfectly BalancedThe dual-chamber design of the FV150 RGB aligns aesthetics with functionality: the glass panels of one chamber are perfect for a clean view of your build while cables, storage and PSU are discreetly hidden in a second chamber. A bottom fan bracket lets you secure fans to the bracket prior to installation, allowing for a completely stress-free setup. GPU and ATX motherboard compatibility offers unlimited flexibility for multiple build configurations.Dual chamber design lets you show off your build while hiding cables, storage drives, and PSU.Supports up to 400mm GPUs and vertical GPU orientation.Supports Mini-ITX, Micro-ATX, ATX motherboards.Engineered bottom fan bracket allows you to attach fans prior to installation.
Float in Form. Flow in Function.The CFV235 is a new kind of PC case featuring the innovative Central Floating Ventilation (CFV) structure. This divides the PSU cabin and main chamber, retooling the open space in between as a cooling advantage by accessing extra ventilation. An optimal combination of a full panoramic view, compact footprint and architecturally-enhanced cooling, the CFV235 empowers airflow beyond ordinary dimensions.Central Floating Ventilation free-floating separation provides a unique visual identity.True floating void adds an extra dimension of airflow across 270° of access.The Aurora RGB lighting strip brings the awe and glory of RGB lighting to the free-floating space.COUGAR Unity 240 single-frame PWM reverse-blade fans are preinstalled on the motherboard side.Accommodates a maximum GPU length of 430mm.Compatible with Reverse Connector / Mini ITX / Micro ATX / ATX / CEB motherboards.USB 3.2 Gen 2×2 Type-C (20 Gbps) x1, USB 3.0 Type-A x 2, 4 pole headset audio jack for versatile device connectivity.Houses 2 x 3.5” HDD drives and 2+2 2.5” SSD drives (converted from 3.5” drive bays)
The View 390 TG Snow Mid-Tower Case stands out with a striking design and enhanced visibility thanks to its curved panel and tempered glass panel, allowing users to showcase their systems. The View 390 TG Mid-Tower Case is engineered for next-gen builds and supports both standard and hidden-connector motherboards from ASUS, MSI, and GIGABYTE. The View 390 TG comes equipped with two 120mm PWM fans at the rear, ensuring efficient cooling performance. For optimal cooling, users can install a 360mm radiator on the right side of the View 390 TG Mid-Tower Case. The rotatable PCI-E slots support both horizontal and vertical GPU installation. A supplied GPU holder and riser cable bracket also help support the GPU and prevent sagging. Maximize the visual effects of your View 390 TG Mid-Tower Case by upgrading it with our LCD screen kit. For storage capacity, the View 390 TG Mid-Tower Case offers maximum support for up to three 2.5" SSDs or two 3.5" HDDs in total. Two USB 3.0 ports, one USB 3.2 Gen 2 Type-C port, and one HD audio port are located on the top for easy direct access when needed.
The View 390 TG Mid-Tower case stands out with its striking design and improved visibility, thanks to a curved panel and a tempered glass panel, allowing users to showcase their system. The View 390 TG Mid-Tower case is designed for next-gen builds and supports both standard and hidden-connector motherboards from ASUS, MSI, and GIGABYTE. The View 390 TG comes with two 120mm PWM fans at the rear to ensure effective cooling performance. For optimal cooling, users can install a 360mm radiator on the right side of the View 390 TG Mid-Tower case. The rotatable PCI-E slots support both horizontal and vertical GPU mounting. An included GPU holder and riser cable bracket also help to support the GPU and prevent sagging. Maximize the visual effects of your View 390 TG Mid-Tower case by upgrading it with our LCD screen kit. For storage capacity, the View 390 TG Mid-Tower case offers maximum support for up to three 2.5-inch SSDs or two 3.5-inch HDDs. Two USB 3.0 ports, one USB 3.2 Gen 2 Type-C port, and one HD audio port are conveniently located on the top for direct access when needed.
The Krux Helio is a compact microATX case featuring a modern design with dark wood accents on the front, inspired by the Palum model. Its appearance makes it a great fit for offices, living rooms, or gaming setups. Despite its small size, it offers space for up to eight 120mm fans (three at the front, two at the bottom, two at the top — 140mm also possible — and one at the rear), and it comes with a 120mm PWM fan pre-installed at the back. A tempered glass side panel provides a view of the interior, while rounded edges emphasize its modern look. Thoughtfully designed dust filters and an easily removable front panel simplify cleaning and fan installation. Inside, it accommodates graphics cards up to 320mm, power supplies up to 170mm, and CPU coolers up to 175mm. There are also mounts for two 3.5" and one 2.5" drives, as well as radiator support up to 280mm. The I/O ports are located on the lower side and include USB-C 2.0, USB-A 3.0, a 3.5mm combo audio jack, as well as power and reset buttons — especially convenient if the case is placed on a desk.
The FSP U530-BS comes with four high-density, sound-dampening side panels that significantly reduce ambient noise. Reinforced with 0.7 mm thick SPCC steel plates, it keeps noise levels to a minimum, so you can focus undisturbed on your work or gaming. The front fan is equipped with special fan covers that ensure targeted airflow and additional noise dampening. Thanks to the four pre-installed quiet 120 mm fans (three at the front and one at the rear), the case delivers outstanding cooling performance. Even with the most demanding components, the system stays cool and efficient. It supports radiators up to 360 mm and ensures your components are reliably cooled even under heavy load. The FSP U530-BS case offers enough space for high-performance graphics cards up to 375 mm in length and a CPU cooler height of up to 175 mm. An integrated graphics card support keeps even heavy components stable without wobbling. The spacious interior allows easy installation of EEB, E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards and provides ample room for a versatile system configuration. In addition to its excellent functionality, the U530-BS impresses with a minimalist and elegant design. It offers excellent air circulation, optimized by mesh dust filters and fan covers. With practical support for ATX power supplies and various drive sizes (3.5" and 2.5" SSD), this case can be perfectly adapted to your needs.
The Corsair FRAME 4000X RS PC case was specifically designed for first-class airflow and ensures efficient cooling of your components. Thanks to the well-thought-out mesh panels and optimized airflow design, your PC system stays cool and powerful even under heavy load. Black mid-tower with built-in RGB front Wide range of fan and radiator mounting options for effective cooling performance Motherboards up to E-ATX, including back-connect designs Space for graphics cards up to 405 mm and CPU coolers up to 170 mm high Includes 4x RS120 fans Corsair FRAME 4000X RS: RGB PC case with built-in fans The Corsair FRAME 4000X RS mid-tower offers the perfect balance between size and functionality. With plenty of room for powerful hardware and efficient cooling, it is the ideal choice for gaming builds. Extensive cooling options with fans and radiators To keep your hardware cool under any workload, up to 13 120 mm fans can be installed in the Corsair FRAME 4000X RS at the same time. The top, front, and side support three 120 mm fans and two 140 mm fans. The top even supports two 200 mm fans. Two additional 120 mm fans can be installed above the power supply shroud, while one more 120 mm or 140 mm fan can be mounted at the rear. An AiO liquid cooler can also be installed without any problems if you prefer to cool your powerful hardware with liquid cooling. Large radiators up to 360 mm can be installed at the top, front, and side, while only 120 mm or 140 mm radiators can be installed at the rear. Four pre-installed fans make it easy to get started: three RS120 fans are mounted at the front, and one more at the rear. Installing your hardware The case offers enough space for powerful gaming hardware. It supports graphics cards up to 405 mm. Motherboards up to the E-ATX form factor are supported, including motherboards with rear-facing connectors. The CPU cooler should not exceed a height of 170 mm. A total of three drives can be installed to store programs and games.
The Lian Li O11 Vision-M is a compact mATX PC case for current hardware and a visually appealing showcase build. Thanks to the dual-chamber design, the power supply, drives, and cables stay in the second chamber, while the front gives you an unobstructed view of the motherboard, graphics card, and your coolers. Three tempered glass panels create a panoramic look without a distracting support bar blocking the view.mATX dual-chamber PC case: Clean build with separate chamberTriple tempered glass: Front, side, and top with lock-and-key mechanismGPU and slot freedom: 5 PCIe slots and graphics cards up to 410 mm longAirflow & water cooling: Up to 12 fans and a 240/360 mm radiator in the topCustomizable design: Custom layout, cover for screen/LCD, STL file for 3D printing a dividerLian Li O11 Vision-M mATX case: Room for Mini-ITX, Micro-ATX, and high-end GPUsO11 Vision-M frontDespite its compact size, the O11 Vision-M offers space for Mini-ITX and Micro-ATX motherboards. With five PCIe slots, there is enough room for a large graphics card. Even long custom designs are no problem: GPUs up to 410 mm in length are supported. In the second chamber, you can install an ATX power supply up to 182 mm. There is also space for up to three drives there - ideal for keeping the power supply, storage, and cables out of sight.Triple tempered glass PC case: Panoramic showcase with lock-and-keyGlass on the front, side, and topThe front, side, and top are made of tempered glass. The panels are locked together via a lock-and-key mechanism and do not require any additional support in the corner. This gives the interior an open look and provides a clear view of your components.To prevent heat buildup despite the glass top, it features a large mesh cutout. This area is designed to reliably vent warm air upward - especially useful with fans or a radiator mounted in the top.240/360 mm radiator in the top and thoughtful tube routing for AiOsThere is space in the top for a 240 mm or 360 mm radiator. The radiator mount offers integrated tube routing, allowing you to run the tubes of your AiO upward and over the motherboard. This keeps the GPU, RAM, and showcase area free of tubes running across them.Airflow in the Lian Li O11 Vision-M: Up to 12 fans for powerful coolingUp to 12 fans in total (distributed across the main and rear chamber)Top: 3x 120 mm (or 240/360 mm radiator)Bottom: 3x 120 mmSide: 2 fan mountsRear: 2 fan mountsFor cooling your hardware, the O11 Vision-M relies on numerous mounting points and a sensible fan layout. At the bottom, you can use 3x 120 mm as intake to feed fresh air directly to the graphics card. At the top, 3x 120 mm can be used as exhaust - or you can install a radiator for CPU water cooling. The side and rear mounting positions let you fine-tune the airflow depending on your build.Rear-chamber cooling with pre-installed fanFan brackets for three additional fansIn the rear chamber, there is a removable bracket that can accommodate 1x 140 mm and 2x 120 mm fans at the same time. This is useful if you want additional exhaust or targeted airflow in the second chamber without changing the look of the main chamber.Customizable elements in the O11 Vision-M: Cover, screen options, and 3D-print dividerCover with screen optionFor custom builds, the case offers a changeable layout and a removable cover that visually conceals a top-mounted AiO. The cover is prepared so that you can neatly integrate either a Lian Li 8,8-inch Universal Screen (sold separately) or another slim display there. Alternatively, it can be replaced with a Lian Li 9,2-inch LCD kit.The screen/LCD options are configured via L-Connect 3, for example for system values or custom animations, and can also be used as a second display if needed. In addition, Lian Li provides a free STL file for creating a 3D-printable divider. This allows you to visually close the gap between the top edge of the motherboard and the AiO, giving your build an even more unified look.
The Lian Li Vector V150 is aimed at anyone who wants to build a compact system without giving up powerful hardware and a premium look. The tempered glass front combines an infinity mirror with two integrated 140 mm fans. Inside, the case offers plenty of room for large components, multiple drives, and extensive cooling. A pre-installed RGB and fan hub also helps you keep lighting and fan control neatly organized. Compact mATX format: For space-saving builds Infinity mirror front: Tempered glass with 2x integrated 140 mm fans Motherboard support: Compatible with Mini-ITX and Micro-ATX Plenty of room for graphics cards: 5 PCIe slots and up to 400 mm GPU clearance Powerful cooling: Up to ten fans and radiator support up to 360 mm The Lian Li Vector V150: Compactly built, made for large components The Vector V150 supports Mini-ITX and Micro-ATX motherboards and offers enough room for high-performance components. For air cooling, CPU coolers up to 163.5 mm in height are supported. Thanks to 5 PCIe slots and up to 400 mm of space for graphics cards, you can also install large GPUs. Clean cable management for a tidy build For a clean interior, there are thoughtfully placed cable pass-throughs, multiple mounting points, and Velcro straps. This allows the cabling to be neatly bundled and kept organized over the long term. You also have flexibility when it comes to drives. In the PSU chamber, a drive cage can be used depending on the PSU length. With a 150 mm PSU, it can accommodate 2x 2.5-inch SSDs or 1x 2.5-inch SSD + 1x 3.5-inch HDD. In addition, there are mounts for three more SSDs. Pre-installed RGB and fan hub An RGB and fan controller is already installed in the case. It brings lighting and fans together in one place, making the build and cable routing clearer and more organized. If you connect the hub to the motherboard, you can control the RGB lighting via compatible motherboard software. Alternatively, the hub can be switched to a wireless mode that can be used with a Lian Li L-Wireless Controller (sold separately) and L-Connect 3. Cooling like a wind tunnel: Many fans, clear airflow 3 fans pre-installed: 2x 140 mm at the front (integrated) + 1x 120 mm at the rear Up to 10 fans in total: Room for up to seven additional fans Top: 2x 140 mm or 3x 120 mm PSU chamber top: 2x 120 mm possible Cooling your components is one of the major advantages of the Vector V150. Three fans are already installed at the factory: two 140 mm fans in the front and one 120 mm fan at the rear. There is room in the top for 2x 140 mm or 3x 120 mm. An additional 2x 120 mm can be mounted on top of the PSU chamber. If you remove the side drive bracket, additional mounting points for 2x 120 mm are created there. This allows for up to ten fans in total. Radiator support for AiO liquid cooling If you want to use an AiO, the Vector V150 case is perfectly prepared for it: there is room in the top for a 280 mm or 360 mm radiator. This lets you tailor the number of fans and radiators to match the installed hardware and your desired noise profile. In addition, the case uses an airflow design that cools the graphics card in particular. There is an angled panel in the PSU chamber that directs the fresh air from the front fans specifically toward the GPU. The air then rises upward through the remaining components—ensuring stable temperatures, especially with high-performance graphics cards. Infinity mirror front made of tempered glass The tempered glass front is equipped with a large infinity mirror and also integrates the two 140 mm fans. Together with the glass side panel, you get a clear view of your hardware and the RGB lighting.
The IT-5905 is a modern Midi-Tower with a robust and compact design. It knows to convince due to its user-friendly assembly of front connectors in the upper part of the front panel.Besides the design, the IT-5905 convinces with space for up to four optional coolers, several mounting options for 3.5" and 2.5" HDD´s and space for graphics cards with a length of 32cm.Two USB 3.0 front connectors and a depot in the cap (for USB-sticks for example) complete the offer and make this case a real all-rounder.KujutegurMiditornTüüpPC5,25" lahtrite arv33,5" lahtrite arv4Emaplaadi toetatud kujuteguridATX,Micro-ATXToote värvMustAknagaJah2,5" salvede arv2Sisemiste 3,5" salvede arv3Väliste 5,25" kettalahtrite arv3SobilikKodu/kontorGraafikakaardi maksimaalne pikkus32 cmKaasas toiteplokkEiUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahMaksimaalne esiventilaatorite arv1Toetatud esiventilaatorite läbimõõt120 mmMaksimaalne küljeventilaatorite arv2Toetatud küljeventilaatorite läbimõõt120 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt80,120 mmToetatud kõvakettasuurused2.5,3.5"JuhtmehaldusJahLähtestusnuppJahLaius200 mmSügavus415 mmKõrgus410 mm
Classic 19" Rack with a lot of space for different drivesYou can remove the HDD cages with a few steps for easy mounting of internal devices.5 mounting slots with full height and the possibility to mount an ATX PSU ensures a professional and cost efficient solution.The lockable doors in front of the slots prevent, unauthorized access.Integrated air filters ensure clean air and a flawless cooling.KujutegurPüstikTüüpServerMaterjalTeras5,25" lahtrite arv43,5" lahtrite arv5Emaplaadi toetatud kujuteguridATX,Micro-ATX,uATX,Mini-ITXToote värvMustAknagaEi2,5" salvede arv2Sisemiste 3,5" salvede arv5Väliste 5,25" kettalahtrite arv4Püstikmontaaž3UMaterjali paksus1,2 mmSertifikaatRoHS, CEKaasas toiteplokkEiUSB 2.0 portide arv2AudiosisendEiAudioväljundEiInstallitud tagaventilaatorid2x 80 mmMaksimaalne tagaventilaatorite arv2Toetatud tagaventilaatorite läbimõõt80 mmToetatud kõvakettasuurused2.5,3.5"LED-indikaatoridVõimsus, HDDLähtestusnuppJahLaius485 mmSügavus530 mmKõrgus133 mmKaal9,34 kgPakendi laius560 mmPakendi sügavus630 mmPakendi kõrgus225 mmPakendi kaal11,1 kg
Tootja: AKYGA Tootegrupp: arvutikorpus arvutikorpuse tüüp: kerge Form Factor Ümbrise tüüp (motherboard type): MicroATX, Flex ATX, MINI ITX Supported toiteploki standards: TFX external 3,5"sahtleid: 1 external 5,25"sahtleid: 1 external 5,25" väikseid sahtleid: 0 internal 2,5"sahtleid: 1 internal 3,5"sahtleid: 1 intenal 5,25"sahtleid: 0 paigaldatud toiteplokk(ies): Ei maksimum toiteplokke: 1 toiteploki võimsus: andmed puuduvad elektripesade pistikuid Serial ATA: andmed puuduvad ATX toiteploki ühenduspesa tüüp: ei puuduta +12V elektripesa tüüp: ei puuduta I/O Ühendusi: 1x stereo mini-jack (kõrvaklappide väljund), 1x stereo mini-jack (mikrofon input), 2x USB 2.0, 2x USB 3.0 ventilaatori kiiruse regulaator: Ei paigaldatud ventilaatoreid: 1 maksimaalne kogus of fans: 1 laius: 102 mm pikkus: 356 mm kõrgus: 338 mm pesade arv korpuses: andmed puuduvad külje õhukanal: Ei tööriistavaba kokkupanek: Jah värv: must Lisaomadused: -can be paigaldatud vertikaalselt või horisontaalselt Lisainfo: Product Site
Cabinet Form Factor: Midi Torn Mainboard Form Factor1sisseehitatud Devices: Kaardilugeja Supported Mainboard Form Factor15.25-inch External Drivesahtleid: 3 2.5-inch Internal Drivesahtleid1Power Device Maksimum Quantity Supports: 1väljundusvõimsus: 500 W kaabel Included1kg Pieces in pack: 1Box kaal Brutto (kg): 4.86 kg Retail Packaging Netokaal Carton1kg Pieces in pack: 1Box kaal Brutto (kg): 4.86 kg Retail Packaging Netokaal Carton1
No. of drive bays: 4 MOLEX power connectors: 2 Floppy power connectors: 1 SATA power connectors: 4 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 0 Number of power supply connector 4+4-pin 12V: 1 8-pin 12V power connectors: 0 Weight: 4.75
Fractal Design Pop Silent - Torn - ATX Product Type: System cabinet Form Factor: Torn värv: must solid I/O Ühendusi: 2 x USB 3.0 Audio sisend Audio joon-out Supported Motherboards: ATX, Mini-ATX, Mini-ITX System Cabinet Features: kaabel management system, toetab 120 mm radiator in rear, PSU dust filters, toetab Kuni 280 mm radiator in front panel Power Device: No toiteplokk (ATX) mõõtmed (WxDxH): 21.5 cm x 47.35 cm x 45.4 cm kaal: 7.3 kg Manufacturer Warranty: 2-year garantii Designed For: Fractal Design Model D, Type D
Stylischer Midi-Tower in Schwarz, perforierte Front für guten Airflow, Seitenteil aus Tempered Glass, mit Netzteilabdeckung, inkl. 3x 140-mm-FRGB-Lüfter, Grafikkarten bis 348 mm, CPU-Kühler bis 180 mm
Design Art in its best by RAIJINTEK – New SFF chassis of OPHION series. The OPHION series case is designed to fulfil a smallest case built with max. Possibility high-end, gaming and standard components, such as Intel i9/i7, AMD ...
