The Lian Li O11 Vision-M is a compact mATX PC case for current hardware and a visually appealing showcase build. Thanks to the dual-chamber design, the power supply, drives, and cables remain in the second chamber, while the front gives you an unobstructed view of the motherboard, graphics card, and your coolers. Three tempered glass panels create a panoramic look without a distracting support bar blocking the view.mATX dual-chamber PC case: Tidy build with a separate chamberTriple tempered glass: Front, side, and top with lock-and-key mechanismGPU and slot freedom: 5 PCIe slots and support for graphics cards up to 410 mm longAirflow & water cooling: Up to 12 fans and a 240/360 mm radiator in the topCustomizable design: Custom layout, cover for screen/LCD, STL file for 3D printing a dividerLian Li O11 Vision-M mATX case: Space for Mini-ITX, Micro-ATX, and high-end GPUsO11 Vision-M frontDespite its compact size, the O11 Vision-M offers room for Mini-ITX and Micro-ATX motherboards. With five PCIe slots, there is enough space for a large graphics card. Even long custom designs are no problem: GPUs up to 410 mm in length are supported. In the second chamber, you can fit an ATX power supply up to 182 mm long. There is also space for up to three drives there - ideal for keeping the power supply, storage, and cables out of sight.Triple tempered glass PC case: Panoramic showcase with lock-and-keyGlass on the front, side, and topThe front, side, and top are made of tempered glass. The panels are locked together using a lock-and-key mechanism and do not require an additional support in the corner. This gives the interior an open look and provides a clear view of your components.To prevent heat buildup despite the glass top, it features a large mesh cutout. This area is designed to reliably vent warm air upward - especially useful with fans or a radiator installed in the top.240/360 mm radiator in the top and well-thought-out tube routing for AiOsThere is space in the top for a 240 mm or 360 mm radiator. The radiator mount features integrated tube routing, allowing you to route your AiO tubes upward and over the motherboard. This keeps the GPU, RAM, and showcase area free of hoses running across them.Airflow in the Lian Li O11 Vision-M: Up to 12 fans for powerful coolingUp to 12 fans in total (distributed across the main and rear chamber)Top: 3x 120 mm (or 240/360 mm radiator)Bottom: 3x 120 mmSide: 2 fan mountsRear: 2 fan mountsFor cooling your hardware, the O11 Vision-M relies on numerous mounting points and a sensible fan layout. At the bottom, you can use 3x 120 mm as intake to supply fresh air directly to the graphics card. At the top, 3x 120 mm can be used as exhaust - or you can install a radiator for CPU water cooling. The side and rear positions allow you to fine-tune the airflow depending on your build.Rear-chamber cooling with pre-installed fanIn the rear chamber, there is a removable bracket that can simultaneously accommodate 1x 140 mm fan and 2x 120 mm fans. This is useful if you want additional exhaust or targeted airflow in the second chamber without changing the look of the main chamber.Customizable elements in the O11 Vision-M: Cover, screen options, and 3D-printed dividerCover with screen optionFor custom builds, the case offers a changeable layout and a removable cover that visually conceals a top-mounted AiO. The cover is prepared so that you can neatly integrate either a Lian Li 8.8-inch Universal Screen (sold separately) or another slim display. Alternatively, it can be replaced with a Lian Li 9.2-inch LCD kit.The screen/LCD options are configured via L-Connect 3, for example for system stats or custom animations, and can also be used as a second display if needed. In addition, Lian Li provides a free STL file for creating a 3D-printable divider. This allows you to visually close the gap between the top edge of the motherboard and the AiO, making your build look even more uniform.
The Fractal Design Summit PC case combines expressive Scandinavian design with strong gaming performance. It features curved wood details, matching solid-wood feet, and refined details for a distinctive look inspired by Scandinavian furniture. The Summit was developed for modern high-end components and comes with three Momentum 140 mm fans already installed in the front, support for graphics cards up to 425 mm long, radiator support up to 360 mm at the front and top, and compatibility with motherboards with rear connections. A modern interior with removable brackets and integrated cable routing ensures a smooth build process and a clean, tidy result.TypeTower caseColorblack/woodEAN7340172712701Manufacturer No.FD-C-SUM1A-03SeriesSummitForm factorMid-TowerMotherboard form factorE-ATXMaterialSteelInternal dimensions - expansion card lengthup to 425 mmInternal dimensions - CPU cooler heightup to 173 mmInternal dimensions - PSU form factorATXInternal dimensions - PSU lengthup to 253 mmInternal drive bays 3.5 inch2 piecesInternal drive bays 2.5 inch2 piecesInternal drive bays 2.5 inch (2.5 in 3.5 inch bays)2 piecesFull-size slots7 piecesFront ports1x Audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s)Front portsThe label USB 3.2 Gen 1 corresponds to the former label USB 3.1 Gen 1 / USB 3.0.Front portsThe label USB 3.2 Gen 2 corresponds to the former label USB 3.1 Gen 2 / USB 3.1.Front3x Momentum 140 mm PWM fans included; alternatively, 3x 120 mm fans can be installedRear1x 120 mm fan mountableNotesDust filter: PSUWater cooling possibleYesWater cooling possible - supported radiatorsFront: up to 280/360 mm, Top: up to 280/360 mm, Rear: 120 mmRear connection of the motherboardYesFurther informationMaximum expansion card lengths: 425 mm with the installed front fan, 393 mm when installing a 30 mm thick radiator | E-ATX format supported up to a size of 277 mm | Installing a motherboard with rear connections is possible up to the ATX formatVolume58 lDimensionsWidth: 22.9 cm x Height: 51.5 cm x Depth/Length: 49.5 cmWeight9.9 kg
Case type: Cube Case, Midi-Tower Form Factor: Micro-ATX, Mini-ITX Colour: Black Main colour: Black Accent colour: Gold Noise dampening: No Width(exact): 260 Height(exact): 190 Depth(exact): 280 Width: 200 - 300 mm Height: 100 - 200 mm Depth: 200 - 300 mm Material: Plastic, Steel Weight (exact): 2 Weight: up to 2 kg, 2 - 4 kg USB: 2x USB 3.0: 2x Audio output: 1x Audio input: 1x Internal 2.5" bays: 4x Internal 3.5" bays: 3x PCI slots: 2x Motherboard tray: no Remote: no Cable management: no Front LCD/TFT display: no Filter: no Power supply: no Power supply format: ATX Power supply position: Rear Lower Fans pre-installed: 1x 120mm 120mm Fan: 1 Fan colour: Black Fan controller: no Card reader: no Front door: no Hot-swap: no Position I/O: Front/Cover HDD anti-vibration: no Radiator-mounting: no Lighting: no
No. of drive bays: 9 MOLEX power connectors: 3 Floppy power connectors: 0 SATA power connectors: 5 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 1 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 1 Number of power supply connector 4+4-pin 12V: 0 8-pin 12V power connectors: 0 Dimensions: 368mm x 173mm x 365mm Weight: 4.1
Cabinet Form Factor: Midi Torn Mainboard Form Factor1sisseehitatud Devices: Kaardilugeja Supported Mainboard Form Factor15.25-inch External Drivesahtleid: 3 2.5-inch Internal Drivesahtleid1Power Device Maksimum Quantity Supports: 1väljundusvõimsus: 500 W kaabel Included1kg Pieces in pack: 1Box kaal Brutto (kg): 4.86 kg Retail Packaging Netokaal Carton1kg Pieces in pack: 1Box kaal Brutto (kg): 4.86 kg Retail Packaging Netokaal Carton1
The outstanding and eye-catching hair-line design of the front panel of this brand new mATX chassis, transports a brushed aluminum feeling thereby blending perfectly into both Home and Office environments. mATX, CHIEFTEC case Driver bay ext.: 3x 5,25"/ 1x 3,5" - int.: 3x 3,5" / 1x 2,5" 2x USB 3.0, Mic-in, Audio-out (AZALIA / HD-Audio) Cooling (optional): 1x 92mm on the rear, 1x 120mm on the front, 2x 120mm on the left side panel install VGA card lenght (max): 280mm
Mid Tower Ceres 300 TG ARGB case The Ceres 300 TG ARGB Mid Tower Chassis is an ATX case shipped with two CT140 ARGB Sync PC cooling fans pre-installed on the front and one CT140 PC cooling fan pre-installed on the rear. Over 55% of the panels are perforated to provide ample airflow and support up to a 360mm radiator at the front and a 280mm radiator at the top. Mid Tower Ceres 300 TG ARGB case The Ceres 300 TG ARGB Mid Tower Chassis is an ATX case shipped with two CT140 ARGB Sync PC cooling fans pre-installed on the front and one CT140 PC cooling fan pre-installed on the rear. Its RGB lighting can be controlled via motherboard software from ASUS, GIGABYTE, MSI and ASRock. As many as 55% of the panels are perforated to ensure high air flow. Besides, a maximum of five 140mm fans or seven 120mm fans can be installed in the case, one 360mm radiator can be placed in the front and a maximum of one 280mm radiator in the top of the case, providing countless hardware options. Built for enormous airflow More than 55% of the panels are perforated With a large number of perforated cutouts, the Ceres 300 TG ARGB is designed for excellent cooling performance. Supports radiators with a diameter of up to 360 mm at the front and 280 mm at the top Our Ceres 300 provides many options for cooling components. Users can place a 360mm radiator at the front and a 280mm radiator at the top. Two CT140 ARGB Sync cooling fans and one CT140 cooling fan installed Ceres 300 TG ARGB is equipped with two 140 mm ARGB PWM fans at the front and one 140 mm PWM fan at the rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying extreme cooling performance. Air inlet and outlet The cooling performance of the Ceres 300 TG ARGB is extraordinary with two CT140 ARGB Sync PC cooling fans pre-installed at the front and one CT140 PC cooling fan pre-installed at the rear. In addition, over 55% of the panels are perforated, ensuring huge airflow through the perforated cutouts. Perfect protection against dust There are fine, removable filters on the top, front, bottom, left and right sides of the housing that provide excellent protection against dirt and can be easily removed for cleaning.
Tootekood: HERITAGE PRO (W)GTIN: 4710562749175Korpused
Compact Midi-Tower with stylish designNine fans ensure efficient airflow, four 120-mm fans already installedSupport for motherboards up to Micro-ATXSpace for graphics cards up to 370 mm and CPU coolers with a height of up to 170 mmPractical carrying handle for transportThe Montech HERITAGE PRO: Stylish Midi-Tower with ample spaceThe Montech HERITAGE PRO is a Midi-Tower that stands out at first glance with its design. It offers you more than enough space to install your high-end components. Fans ensure very good airflow, which efficiently cools your hardware. Additionally, the tower can even be transported with the practical carrying handle.Efficiently cooled with fans and radiatorsEffective cooling is the most important thing in a high-end PC. That's why up to nine fans can be installed in the Montech HERITAGE PRO. The top can accommodate either three 120 mm fans or two 140 mm fans, while the bottom can accommodate three more 120 mm fans. The back also supports a 120 mm fan, as well as two 120 mm fans on the side. This ensures that your hardware stays cool even in performance-intensive games.For the installation of a custom water cooling system, a radiator up to 360 mm can be installed on the top.Space for your high-end hardwareThe Midi-Tower supports the installation of graphics cards up to a size of 370 mm. Motherboards up to the Micro-ATX format can be accommodated.The CPU cooler should not exceed a height of 170 mm. For storing programs and games, two 2.5-inch drives or one 3.5-inch drive can be installed.
