Darkflash DB330M Mesh computer case (white)Darkflash DB330M Mesh is a computer case designed for M-ATX and ITX standard motherboards. Its dimensions (368 × 218 × 400 mm) allow the construction of a compact set-up with a graphics card up to 305 mm long and CPU cooling up to 180 mm high. The design is based on a 0.5 mm SPCC steel frame and features a tempered glass panel and mesh front for efficient air or liquid cooling.Efficient air coolingThe Darkflash DB330M Mesh case supports up to 7 fans: 2 at the front, 2 at the bottom, 2 at the top and one at the rear. The top part of the design allows for the installation of fans in 120 or 140 mm sizes, while the remaining locations are provided for 120 mm fans only. This arrangement allows for the creation of a vertical cooling channel that promotes natural air circulation and efficiently dissipates heat from components.240 mm liquid coolingThe Darkflash DB330M Mesh allows you to mount a water cooler of up to 240 mm in the top. This allows you to install a high-performance AIO system without sacrificing other components. The maximum height of the air cooler is 180 mm.Mesh panel with filterThe front panel of the case is made of mesh, which improves airflow and also acts as a dust filter. Additional vents are also located on the top and bottom of the design.Space for longer GPUsA graphics card up to 305 mm in length can be mounted inside. The chassis offers 4 PCI slots, making it possible to mount two- and three-slot cards. The power supply compartment and cable space do not limit the length of the GPU.Glass side panelThe left panel is made of tempered glass to expose the computer's interior and components with RGB backlighting. The panel can be easily removed without tools.Separate space for cables and multiple portsThe back of the case features a contoured space and pass-through holes for orderly cable routing. This layout makes it easier to install components and improves airflow in the main compartment. The front panel features a USB 3.0 port, 2 USB 2.0 ports, one HD Audio port and a power button. This allows you to enjoy quick access to basic functions without having to reach the back of the case.ATX power supply compatibility and board supportThe bottom of the case has room for a standard ATX power supply. This makes it possible to mount full-power units without the space constraints typical of smaller enclosures. In addition, the Darkflash DB330M Mesh supports M-ATX and ITX motherboards, offering optimal conditions for building a home, office or gaming PC. The lack of pre-installed fans allows for individual selection of cooling components. ManufacturerDarkflashModelDB330M Mesh WhiteHousing typeMidi TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardAt the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x1Expansion card slots4Max PSU length210 mmMax length of graphics card305 mmMax height of CPU cooler180 mmMax number of fans7Fan mounting optionsTop: 120 mm x2 / 140 mm x2; Bottom: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1Water cooling mounting optionsTop: 240 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPowerConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorWhiteHeight400 mmWidth218 mmDepth368 mmWeight3.8 kg
MSI PRO SHIELD M100P. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Bagerste ventilatorer installeret: 1x 80 mm, Understøttede diametre for bagerste ventilatorer: 80,90 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 166 mm, Dybde: 312 mm, Højde: 354 mm. Pakkevægt: 3,58 kg
The Thermaltake View 390 Air Mid Tower Chassis is the perfect choice for demanding gamers and PC enthusiasts who value both functionality and aesthetics. Featuring a modern design in black and an array of innovative features, it provides maximum adaptability and performance. Outstanding hardware support: accommodates CPU coolers up to 160 mm, graphics cards up to 420 mm, and power supplies up to 200 mm. Expansion options: supports up to 11 fans or radiators up to 360 mm for powerful cooling. Compatibility with Hidden Connector motherboards: fully compatible with ASUS and MSI Hidden Connector motherboards for an innovative build. Two pre-installed CT120 fans ensure optimal cooling performance right out of the box. This case is not only a technical powerhouse but also a real eye-catcher for any gaming rig. With excellent value for money, the Thermaltake View 390 Air is the ideal choice for high-performance PC builds. Optimize your gaming experience—now with the Thermaltake View 390 Air!
Kaarevad karastatud klaaspaneelid • Eelpaigaldatud ARGB jahutusventilaatorid • Õhuvoolule optimeeritud korpuse konstruktsioon • Toetab suuri graafikakaarte ja jahuteid • Ruumikas sisemus ja kaablite haldus
The Viewport Mini in its elegant white version is a mini-tower case featuring front and side panels made of tempered glass, providing a panoramic view of the high-performance interior components. It supports Micro ATX and Mini-ITX motherboards and offers advanced cooling options with 7 fan slots and liquid cooling support for 240/280 mm and 120 mm radiators. The included ARGB fans draw air through mesh ventilation to optimize airflow. Ideal for gaming and high-performance applications, it accommodates GPUs up to 355 mm and CPU coolers up to 165 mm.
The FSP U530-BS comes with four high-density, sound-dampening side panels that significantly reduce ambient noise. Reinforced with 0.7 mm thick SPCC steel plates, it keeps noise levels to a minimum, so you can focus undisturbed on your work or gaming. The front fan is equipped with special fan covers that ensure targeted airflow and additional noise dampening. Thanks to the four pre-installed quiet 120 mm fans (three at the front and one at the rear), the case delivers outstanding cooling performance. Even with the most demanding components, the system stays cool and efficient. It supports radiators up to 360 mm and ensures your components are reliably cooled even under heavy load. The FSP U530-BS case offers enough space for high-performance graphics cards up to 375 mm in length and a CPU cooler height of up to 175 mm. An integrated graphics card support keeps even heavy components stable without wobbling. The spacious interior allows easy installation of EEB, E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards and provides ample room for a versatile system configuration. In addition to its excellent functionality, the U530-BS impresses with a minimalist and elegant design. It offers excellent air circulation, optimized by mesh dust filters and fan covers. With practical support for ATX power supplies and various drive sizes (3.5" and 2.5" SSD), this case can be perfectly adapted to your needs.
The Xtender is a high-airflow panoramic case designed for maximum air circulation. Five pre-installed fans ensure efficient cooling of powerful components. The eye-catching E-ATX case is also equipped with modern connections and plenty of space for technology. A special highlight of the ARCTIC Xtender is the modern glass look, which is created by a seamless connection of the front and side panels made of tempered glass. The Xtender comes with five addressable ARGB fans ex works, three of which are inverted and pull the air from the side into the housing for ideal airflow. If you prefer to cool your case with water, you can also operate another radiator of up to 420 mm in addition to a 420 mm radiator. Three 2.5" drives are supported behind the mainboard tray. The removable drive cage offers mounting rails for two 3.5"/2.5" and another 2.5" drive. With a space of 482 mm, large graphics cards can also be used in the Xtender. Additionally, CPU coolers can have a height of up to 171 mm and power supplies can have a length of up to 318 mm. The well thought-out cutouts and the optimally placed cable holders ensure easy cable management. Easily removable, reinforced filters protect against dust and enable quick cleaning. Tower case type Color black EAN 4895265001314 Manufacturer no. ACPCC00023A Midi tower design Motherboard form factor E-ATX Material tempered glass, steel Window Kit Yes Internal dimensions plug-in card length maximum 482 mm Internal dimensions CPU cooler height maximum 171 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 318 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Back 2 x 120 mm P12 Pro A-RGB fans pre-installed Notes Cable management: 35 mm, dust filter: top, right side, top: 3 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed, side: 3 x 140 mm P14 Pro Reverse A-RGB fans pre-installed, alternatively 3 x 120 mm fans can be installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: up to 360/420 mm, Side: up to 360/420 mm. Rear connection of the mainboard No Learn more Modular removable fan rails to install 140mm fans on top or side Accessories available: screws, cable ties, operating instructions Volume 65 l Dimensions Width: 23.1 cm x Height: 52.9 cm x Depth/Length: 52.9 cm Weight 15.4kg
The Grandia GD04 is an incredible product that combines years of SilverStone's expertise in SFF (Small form factor) and HTPC (Home Theater Personal Computer) chassis design. It has a beautifully proportioned exterior and powerful thermal capability that rivals the best tower chassis. From the front, the GD04 is shaped similarly to most home theater components, but the depth was reduced to a mere 323mm. This overall size of 21.5 liters in volume actually makes the case one liter smaller than SilverStone’s own Micro-ATX Sugo cases! Even though GD04’s diminutive size allows it to easily integrate into any home theater cabinet, it can still accommodate an impressive list of standard components such as 5.25” optical drive, two 3.5” hard drives, a 2.5” SSD, a standard ATX power supply, and two high-end graphics cards up to 11 inches. Cooling duty in the GD04 is handled by three filtered 120mm fans designed with the same positive air pressure as the Fortress FT01, this enables class-leading cooling efficiency, reduced dust buildup, and silent operation. To make installation simpler, there is even enough space for cable management to be easily accomplished without the need for short cabled or modular power supply. Coupled with the special attention given to the order of installation, any user can quickly assemble or upgrade the GD04 and devote more time to enjoying a personalized digital life with an HTPC.Format microATXMaximum graphics card lenght 279 mmMaximum CPU-Cooler Height 75 mmSpecial Featuress Luftöffnungen an der Oberseite and an der Seite, three 120-mm-Fan an den Seiten, Luftöffnung for ein Netzteil an der Unterseite, Vibrationsdämpfer for die Festplatten, ein Netzteil with einer Länge von up to180 mm einbaubarPower Supply SlotDesign ATXDrive Baysexternal 5,25 inches 1internal 3,5 inches 32,5 inches 2FansIncluded 3x 120 mmInstallable 2x 80 mmFront-SideSpecial Featuress Power- and Reset-button, Power-LEDPorts USB 3.0 2Audio 2Back-SideSlots Full-Size 4additional Full-Size 1Product dimensions 440 x
Product kirjeldus: ZALMAN Z-MACHINE 500 - MDT - extended ATX Product Type: System cabinet Form Factor: Mid Torn I/O Ühendusi: 2 x USB 2.0 2 x USB 3.0 1 x USB-C 3.1 1 x microphone 1 x kõrvaklapid Supported Motherboards: ATX, microATX, Mini-ITX, Extended ATX System Cabinet Features: kaabel management system, tempered glass side panel, airflow channels, tempered glass front panel, tempered glass top panel, toetab 120/240/280 mm radiator in top, toetab 120/240/360 mm radiators in front, Razer Chroma RGB, ARGB controller Power Device: No toiteplokk mõõtmed (WxDxH): 28 cm x 63 cm x 60.2 cm kaal: 10.5 kg
DIMENSIONS : (D)420mm X (W)269.5mm X (H)380mm MOTHERBOARD : E-ATX (Max 280 mm wide)/ATX/ Micro-ATX/ Mini-ITX PSU : SFX/ SFX-L MATERIAL : Steel 4 mm Tempered Glass 2mm Aluminum (top and left panel) FAN SUPPORT : Top: 3x 120mm or 2x 140mm Side: 2x 120mm or 2x 140mm Bottom: 3x 120mm or 2x 140mm Rear: 1x 120mm RADIATOR SUPPORT : Top: 360mm or 280mm or 240mm radiator Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator GPU LENGTH CLEARANCE : 395mm CPU COOLER HEIGHT CLEARANCE : 170mm VGA Length : 370mm DRIVES : Right side 2 x 2.5″ SSD + back plate 2 x 3.5″ HDD (or SSD) EXPANSION SLOTS : 3 or 5 or 7 slots (depends on back panel) IO PORTS : 2 x USB 3.0, 1 x USB 3.1 TYPE-C, 1 x HD Audio, Power Button DUST FILTERS : 1 x Top, 1 x Bottom, 2 x Side
The LC Power Classic 7040B is a mid-tower chassis designed for users seeking a reliable and functional solution for their desktop setup. It features a spacious interior capable of accommodating a variety of motherboard types including ATX, microATX, and Mini-ITX. The chassis incorporates side metal mesh ventilation and a vented side panel, ensuring efficient airflow for optimized cooling performance. With four internal bays and two front accessible bays, this chassis offers ample storage options while maintaining easy access for your devices. For connectivity, the front panel includes USB 3.2 Gen 1 and USB audio ports, allowing for quick connections to peripherals. With a maximum video card length of 360 mm and CPU cooler height of 145 mm, this chassis supports many components. The plastic and metal materials combine to offer a sturdy build that meets various user needs in a compact form factor.
MAG FORGE 112R TAKE THE BATTLEFIELD The MAG Series hardware, computers and components were born out of rigorous quality testing and are designed to stand for strength and durability. Our designers have focused on making the hardware as user-friendly as possible, so the MAG series products feature a simple installation process that, combined with a user-friendly interface, makes them the best choice for first-time gamers. ARGB LIGHT SHOW Create your own ARGB battle station with the MAG FORGE 110 series chassis, which is fully compatible with MSI Mystic Light technology. OPTIMISED AIRFLOW The MAG FORGE 110 series cases are optimised for, large and efficient airflow to cool the system. The MAG FORGE 110 series allows for the installation of up to 6 fans. Insta-Light Loop Button Quickly control the colours of the fan backlighting, the colours of the LED strip on the front panel of the case and the light animation effects with just one Insta-Light Loop button. Now you can easily browse through the profiles and choose your favourite case illumination. MAGNETIC DUST FILTER There is a magnetically mounted filter on the top vents to prevent dust from getting inside the case, yet it can be easily removed for cleaning. TOOL-FREE FASTENING SIDE PANEL The light grey shade of the 4mm side panel, made of tempered glass, is ideal for displaying RGB light effects. At the same time, it provides a very good view of the components inside the PC. The well-thought-out design of the MAG FORGE 112R case allows users to install and remove the tempered glass side panel very easily and safely. Simply place the side panel into the corresponding groove of the case base before installing it.
Corsair mid-tower 3000D tempered glass case, white The white ATX mid-tower CORSAIR 3000D AIRFLOW provides intensive air circulation and excellent cooling. A steel front panel and two pre-installed CORSAIR SP120 ELITE fans ensure optimal airflow through the case, while a tempered glass side panel allows for easy viewing of components. Up to 8 120mm fans or up to 4 140mm fans can be accommodated in the intelligently organized interior. With room for radiators up to 360mm in size, support for 3.5" and 2.5" drives, and support for four-slot graphics cards up to 360mm in length, you can create a high-performance system. The front I/O panel has two USB 3.2 Type A ports and a microphone and headphone jack. Outstanding Cooling Capabilities: Spacious interior holds up to 8 x 120mm cooling fans or 4 x 140mm fans with multiple heatsinks including one 360mm front and one 280mm on top (depending on the height of the memory modules) RAM). CORSAIR AirGuide Technology: The two pre-installed SP120 ELITE fans generate 24.7 dBA of noise and feature CORSAIR AirGuide technology that increases static pressure and directs airflow for better cooling. Dedicated graphics card cooling: The case accommodates the latest graphics cards and has two additional 120mm fan mounts on the PSU shroud that allow you to install fans directing the airflow directly to the graphics card. Four-slot graphics capability: For an advanced, high-performance computing setup, you can freely install a four-slot graphics card up to 360mm in length into the chassis. Optimized front panel for intensive air circulation: The optimized steel front panel provides powerful airflow in the system for maximum cooling. Tempered glass side panel: Show off your internal components in elegant style. All the storage you need: Holds up to 2 SSDs and 2 HDDs.
The Gembird Fornax M100B system cabinet combines functionality with style, making it a suitable choice for gamers and PC enthusiasts. This tower chassis features a glass windowed side panel, allowing users to display their system's internal components with pride. The front panel is equipped with USB and audio connectors for easy access, while the blue color ring on the cooling system adds a distinctive look to your setup.Designed for optimal airflow, the Fornax M100B includes two 120 mm fans at the front, ensuring your components stay cool during intense gaming sessions. The case supports video cards up to 330 mm in length and is compatible with ATX mainboards, offering flexibility for various system builds. With four internal expansion bays, users have ample space for both 2.5" and 3.5" drives, providing plenty of options for storage expansion.Constructed with quality materials, including SGCC and glass, and compliant with ISO 9002 and RoHS standards, the Fornax M100B is a durable and environmentally friendly choice for your next system build.
XPG VALOR MESH C | CASE MIDITOWER ATX W/O PSU/VALORMESH4VW-WHCWW ADATA | MidiTower | PSU Not included | Front: 3 x 120mm Fans; Rear: 1 x 120mm Fan | Dimensions 460 x 210 x 371 mm
