The Lian Li DAN Cases A3-mATX Wood Edition in black combines modern design with an elegant walnut wood front panel. Thanks to excellent airflow through mesh panels, flexible configuration options, and space for high-end hardware, this case is the ideal choice for those seeking performance and style in a compact format. Perfect for demanding builds with a personal touch! Micro-ATX case by Lian Li in collaboration with DAN Cases Elegant front cover made from premium walnut wood and side panel of tempered glass Mesh panel on the top for excellent airflow Flexibly customizable: Let your imagination run wild Outstanding cooling thanks to space for 360 mm radiators Suitable for motherboards in Micro-ATX or Mini-ITX form factors Supports various power supplies from SFX to ATX A touch of luxury: The Lian Li DAN Cases A3-mATX Wood Edition in black If you're looking for a small form factor case for high-performance PC hardware, you should take a closer look at the Lian Li DAN Cases A3-mATX Wood Edition. This case combines a minimalist design with premium features: the elegant walnut wood front gives your setup an exclusive touch. With a capacity of about 26 liters, this Micro-ATX case is compact and space-saving. At the same time, the A3-mATX Wood Edition is perfect for high-end PC components, offering effective cooling despite its small size. With plenty of room for fans and radiators and generous ventilation openings, this mini tower easily meets the demands of powerful hardware. Flexibility meets performance: The fan and cooling options of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX Wood Edition offers space for up to 10 fans in the 120 mm format. These can be distributed as follows: three on the top, three on the side, three on the bottom, and one on the rear. Alternatively, two 140 mm fans can be mounted on both the top and side. With 25 mm thick fans on the case bottom, the GPU’s height is limited to 61 mm (3 slots). CPU air coolers can be up to 165 mm tall. Lian Li and Daniel Hansen also considered water cooling when developing the A3-mATX: A radiator can be installed in three locations inside the case: either a 360 mm (triple radiator) or 280 mm (dual radiator) on the top or the side. You must choose one of these two positions. The bottom of the case accommodates an additional 240 mm radiator. If you mount the fans below the radiator, you can even install a 360 mm radiator. Customizable configuration: The versatile possibilities of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX is suitable for a motherboard in Micro-ATX or Mini-ITX form factor. Unlike a Mini-ITX case, the PC case offers four expansion slots, allowing you to install a graphics card up to 4 slots tall and up to 415 mm long. You can install two 2.5-inch SSDs on a bracket. You can also install a 3.5-inch HDD or another 2.5-inch drive at the bottom of the case. You have the choice between an ATX, SFX-L, or SFX power supply, which you can mount flexibly at the front or side to create more space for your graphics card or the radiator—just as you prefer. In general, the smaller the power supply in the A3-mATX, the more room you have for the rest of your hardware. The I/O panel on the front of the Lian Li DAN Cases A3-mATX Wood Edition features two USB 3.0 Type A ports, one USB 3.1 Type C port, two 3.5 mm audio jacks (Mic-In/Audio-Out), and a power button. Note: The Lian Li DAN Cases A3-mATX Wood Edition offers numerous configuration options, but space inside this case is limited. The size and position of the power supply are crucial in selecting the right PC components. Therefore, we recommend careful planning using the manual in advance.
With the Lian Li LANCOOL 217 INF, you get a PC case that cleverly combines aesthetics and airflow. Based on the LANCOOL 217, it offers you practical features such as tool-less fan installation, flexible PSU positioning, and a movable front I/O. The front features tempered glass with a mirror, infinity effect, and RGB lighting—integrated into the front are two 170 mm fans that direct fresh air straight into the system. There's plenty of space: anything from Mini-ITX to SSI-EEB motherboards, large GPUs, multiple drives, and ATX PSUs fit easily. Elegant glass front: Tempered glass with all-around RGB infinity effect High airflow: Two integrated 170 mm ARGB fans in the front glass Versatile compatibility: Supports motherboards from Mini-ITX up to SSI-EEB Room for large graphics cards: Seven PCIe slots, supports GPUs up to 380 mm in length Highly adaptable: Variable PSU installation & movable front I/O Stylish design: RGB lighting for a unique look Lian Li LANCOOL 217 INF: Strong airflow despite a glass front LANCOOL 217 INF glass front with infinity mirror The glass front combines showcase appeal with effective airflow. The mirror with infinity effect and RGB lighting runs along the edges, while two 170 mm ARGB fans are installed directly in the front. They deliver high airflow at pleasant noise levels—perfect for reliably keeping your components cool. Midi-Tower for today's hardware LANCOOL 217 INF side view The Lian Li LANCOOL 217 INF can accommodate motherboards from Mini-ITX up to SSI-EEB—including boards with back-connect. Thanks to 7 PCIe slots and 380 mm of clearance for GPUs, your powerful high-end graphics card will fit with ease. In addition, there are enough fan mounting spots, so you can expand cooling for your components as needed. Flexible cooling & I/O as you like The top can fit up to three 120 mm or two 140 mm fans, and the rear supports either a 120 mm or 140 mm fan. A 140 mm RGB fan comes pre-installed in the rear. The front I/O module with 2× USB-A, USB-C, and a 3.5 mm combo jack can be mounted either on the top or the side—ensuring easy access in any setup, no matter how you configure it. Easy-to-control, powerful RGB lighting LANCOOL 217 INF interior view Lighting control: Two RGB buttons directly on the case 15 lighting effects: Selectable with a button press Software control: Synchronizable via L-Connect 3 Wireless ready: Compatible with Lian Li Wireless Controller Quiet performance: 170 mm fans at a maximum of 34 dB(A) The Lian Li LANCOOL 217 INF offers powerful RGB highlights: a large infinity mirror on the front and pre-installed ARGB fans. Using two buttons next to the power button, you can control effects and colors directly—without the need for additional software. Optionally, you can synchronize everything via Lian Li Wireless and L-Connect 3—including fan curves for the ideal balance between noise and cooling. For RGB fans, airflow enthusiasts, and tinkerers alike: the LANCOOL 217 INF combines strong cooling, a flexible layout, and eye-catching design in a single case.
The Lian Li LANCOOL 216 RGB White E-ATX Case is a stylish mid-tower case designed for E-ATX motherboards. It features three radiator mounts for water cooling (1x 240mm / 2x 360mm), a tempered glass side panel, and comes with three pre-installed fans (2x 160mm ARGB / 1x 120mm). It also includes a fan and ARGB hub for easy customization and control.
The Chieftec Pro Mini AZ-01B-OP mini-tower chassis is a compact yet versatile solution for building high-performance systems. It supports mini ATX and microATX motherboards, offering flexibility for various system builds. The chassis includes a comprehensive cooling system with a rear 120 mm fan or radiator, front and top fan mounts capable of supporting up to 280 mm radiators, and additional mounts on the PSU shroud, ensuring optimal airflow and cooling efficiency. For those seeking a quieter computing experience, the Chieftec Pro Mini features sound dampening panels on the front and sides to minimize noise. Additionally, the front panel is equipped with USB-C, USB 3.0, and USB 2.0 ports, along with audio line-out and microphone jacks, providing convenient connectivity options. With its sleek design, efficient cooling, and quiet operation, the Chieftec Pro Mini AZ-01B-OP is an excellent choice for users looking to build a compact, powerful, and versatile system.
PURE BASE 501 | MidiTower | PSU Not included | front 1x Pure Wings 3 140mm PWM White; rear 1x Pure Wings 3 140mm PWM White | Dimensions 450 x 231 x 463 mm
Corsair Midi Tower 3500X LXR LINK TG. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Understøttede strømforsyning formfaktorer: ATX. Understøttede diametre for sideventilatorer: 120,140 mm, Understøttede diametre for bagerste ventilatorer: 120 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Bredde: 240 mm, Dybde: 460 mm, Højde: 506 mm
Keep your components at optimal temperature with the Corsair Frame 5000D RS ARGB, the perfect choice for anyone who values powerful cooling. Its air-permeable design and optimized airflow architecture ensure ideal cooling, even during long gaming sessions or high system loads – a case that perfectly combines performance and cooling. White midi-tower with a breathable steel cover at the front Effective cooling performance with up to 14 fans and radiators up to 420 mm Supports motherboards up to E-ATX and back-connect design support Space for graphics cards up to 450 mm and CPU coolers up to 175 mm in height Four pre-installed RS140 ARGB fans Corsair Frame 5000D RS ARGB: Midi-Tower for High-Performance Hardware The Corsair Frame 5000D midi-tower offers the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it is the ideal choice for gaming builds. Comprehensive Cooling Options To keep your hardware cool under any load, the Corsair Frame 5000D RS ARGB can be equipped with up to 14 fans simultaneously. The top panel supports three 120 mm or 140 mm fans. At the front, you can also install up to three 120 mm or 140 mm fans, or even two 200 mm fans. The fan mounts on the top and front are adjustable, giving you much more flexibility when installing your fans. At the bottom, you can install another four 120 mm fans, while the side supports three fans, either 120 mm or 140 mm. At the rear, you can install one 120 mm or 140 mm fan. Four high-quality 140 mm RS ARGB fans from Corsair come pre-installed – three at the front and one at the back. The daisy-chained connectors ensure an easy setup. If you prefer water cooling – whether an AiO or a custom water cooling system – radiators can also be installed. The top can accommodate a radiator up to 420 mm, while the front and side support a 360 mm radiator. There is also room at the rear for a small 140 mm or 120 mm radiator. Installing Your Hardware The case offers plenty of space for high-performance gaming hardware. It supports the installation of large graphics cards up to 450 mm. An included support arm ensures your GPU doesn’t sag. Additionally, vertical installation is possible with a suitable riser cable, which can be purchased separately. Motherboards up to E-ATX format are supported – including boards with a back-connect design. Thanks to hidden cables, the interior of your gaming PC looks much tidier. The CPU cooler should not exceed a height of 175 mm. To store programs and games, you can install a total of eight drives – six 2.5-inch SSDs and two 3.5-inch HDDs.
Keep your components at the optimal temperature with the Corsair Frame 5000D, the perfect choice for anyone who values high-performance cooling. Its air-permeable design and optimized airflow architecture ensure ideal cooling even during long gaming sessions or heavy system loads—a case that perfectly combines performance and cooling. Black midi-tower with air-permeable steel front cover Effective cooling performance with up to 14 fans and radiators up to 420 mm Supports motherboards up to E-ATX and back-connect design Space for graphics cards up to 450 mm and CPU coolers up to 175 mm in height Four pre-installed RS140 fans Corsair Frame 5000D: Midi-Tower for High-Performance Hardware The Corsair Frame 5000D midi-tower offers the perfect balance between size and functionality. With ample space for high-performance hardware and efficient cooling, it is the ideal choice for gaming builds. Comprehensive Cooling Options To keep your hardware cool under any load, the Corsair Frame 5000D can accommodate up to 14 fans simultaneously. The top supports either three 120 mm or 140 mm fans. The front can also house three 120 mm or 140 mm fans, as well as two 200 mm fans. The fan mounts on the top and front are adjustable, giving you much more flexibility when installing your fans. You can install another four 120 mm fans at the bottom, while the side can house three fans of either 120 mm or 140 mm. The rear can be fitted with a 120 mm or 140 mm fan. Four high-quality 140 mm RS fans from Corsair are already installed—three at the front and one at the rear. The switchable connectors make for easy setup. If you prefer to install water cooling—whether an AiO or custom loop—radiators can be installed as well. The top can accommodate a 420 mm radiator, while the front and side support 360 mm radiators. There is also space at the rear for a small 140 mm or 120 mm radiator. Installing Your Hardware The case offers enough space for high-performance gaming hardware. It supports the installation of large graphics cards up to 450 mm—a supplied support arm ensures your GPU doesn’t sag. Additionally, vertical installation is possible with a compatible riser cable, available separately. Motherboards up to the E-ATX format are supported—including back-connect models. Thanks to hidden cable routing, the interior of your gaming PC remains much tidier. The CPU cooler should not exceed a height of 175 mm. For storing programs and games, you can install a total of eight drives—six 2.5-inch SSDs and two 3.5-inch HDDs.
MÕÕTMED: 215 x 473.5 x 454 EMAPLAADI TUGI: Mini ITX; Micro ATX; ATX GRAAFIKAKAARDI PIKKUS KUNI: 405 mm PROTSESSORI ÕHKJAHUTI KÕRGUS KUNI: 170 mm TOITEPLOKI ÜHILDUVUS: ATX; 17 cm KAABLITELE RUUM: Olemas KAAL: 7.2 kg Ühenduvus I/O PANEEL: 1 x headphones; 2 x USB 3.0; 1x microphone PCI PESASID KUNI: 7 Kettasahtlid: 4x 2.5" pesa 3x3.5" Ventilaatoritugi: ÜLESSE PAIGALDATUD - 1x Aspect 12 RGB ETTE PAIGALDATUD -2x Aspect 12 ÜLESSE VÕIMALIK PAIGALDADA 2x120/140 TAHA VÕIMALIK PAIGALDADA 1x120 ETTE VÕIMALIK PAIGALDADA 2x120/140 Radiaatoritugi: ÜLEVAL - 240 mm
The Lian Li DAN Cases A3-mATX Wood Edition in white combines minimalist design with luxurious functionality. With its elegant beech wood front, excellent airflow thanks to mesh panels, and flexible customization options, it’s the perfect choice for anyone wanting a powerful, compact setup. White micro-ATX case from Lian Li in cooperation with DAN Cases Elegant front cover made of fine beech wood and side panel of tempered glass Mesh panel on the top for excellent airflow Flexibly customizable: let your imagination run wild Outstanding cooling thanks to support for 360 mm radiators Compatible with Micro-ATX or Mini-ITX motherboards Supports different power supplies from SFX to ATX A touch of luxury: The Lian Li DAN Cases A3-mATX Wood Edition in white If you are looking for a small form factor case for high-performance PC hardware, the Lian Li DAN Cases A3-mATX Wood Edition is worth a closer look. This white case combines minimalist design with luxurious features: the fine beech wood front gives your setup a touch of exclusivity. With a capacity of about 26 liters, this white micro-ATX case is compact and saves space. At the same time, the A3-mATX Wood Edition is perfect for high-end PC components, as it provides effective cooling despite its small size. Thanks to ample space for fans and radiators and generous ventilation openings, this mini-tower easily meets the needs of powerful hardware. Flexibility meets performance: The fan and cooling options of the Lian Li DAN Cases A3-mATX Wood Edition in white The white Lian Li DAN Cases A3-mATX Wood Edition accommodates up to 10 fans in the 120 mm format. These can be distributed as follows: three on the top, three on the side, three on the bottom, and one at the rear. Alternatively, two 140 mm fans can be mounted on both the top and the side. With 25 mm thick fans at the bottom of the case, GPU height is limited to 61 mm (3 slots). CPU air coolers can have a maximum height of 165 mm. Lian Li and Daniel Hansen from DAN Cases also considered water cooling in the development of the A3-mATX: A radiator can be installed in three locations inside the case: on the top or side, with support for up to a 360 mm (triple radiator) or 280 mm (dual radiator). Here, you have to choose between the two positions. The bottom of the white case can accommodate an additional 240 mm radiator. If you mount the fans below the radiator, you can even install a 360 mm radiator. Customizable configuration: The versatile options of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX in white is suitable for a motherboard in the Micro-ATX or Mini-ITX form factor. Unlike a mini-ITX case, this PC case allows you to install a graphics card up to 4 slots high and up to 415 mm long, thanks to its 4 expansion slots. The drive cage provides space for two 2.5-inch SSDs. At the bottom of the white case, you can also install a 3.5-inch HDD or another 2.5-inch drive. Choose between an ATX, SFX-L, or SFX power supply and mount it flexibly at the front or side, creating extra space for your graphics card or radiator—just as you need. With the A3-mATX, the smaller your power supply, the more space you have for the rest of your hardware. The I/O panel on the front of the Lian Li DAN Cases A3-mATX Wood Edition—white offers two USB 3.0 Type-A ports, one USB 3.1 Type-C port, two 3.5 mm audio jacks (mic-in/audio-out), and a power button for switching on. Note: The Lian Li DAN Cases A3-mATX Wood Edition offers numerous configuration options, but space inside this case is limited. The size and position of the power supply are crucial for choosing the right PC components. That's why we recommend careful planning in advance using the manual.
The Montech X5 is a mid-tower case that combines elegant design with solid cooling performance. With a sleek front panel, tempered glass side window, and pre-installed fans, it's the ideal choice for budget-conscious PC setups. Modern mesh front panel with a clean, minimalist look Three 140mm and one 120mm fans pre-installed for instant cooling Tempered glass side window for an unobstructed view of the interior Compatible with E-ATX motherboards and GPUs up to 410 mm in length Spacious interior with tidy cable management Elegant design for any setup Enjoy high compatibility in a compact build with the Montech X5 Mid-Tower. It accommodates large GPUs, powerful cooling systems, and modern cable management—without appearing bulky. The X5 uses a simple front panel without mesh, delivering a clean overall appearance. It's especially suitable for users who value a clear, minimalist look. This case combines performance with style—the RGB lighting delivers an impressive appearance and enhances your entire setup. Whether for a gaming rig or workstation, customizable effects make your PC a real eye-catcher. Solid cooling performance with four fans Keep your components at optimal temperature with the Montech X5, the perfect choice for those who prioritize high-performance cooling. Its airflow-friendly design and optimized airflow architecture ensure ideal cooling, even during long gaming sessions or heavy system loads—a case that perfectly combines performance and cooling. Despite the closed front, four 120mm fans are already installed, providing good basic cooling right out of the box. This means you're ready to go without additional investment. Thanks to the removable dust filters, your case stays free from dust build-up. The filters are easy to clean, so your computer remains optimally cooled at all times. Easy assembly & flexible hardware support The interior offers space for standard ATX motherboards, long graphics cards, and multiple drives. Thanks to its thoughtful structure, installation is quick and straightforward, even for beginners.
The CORSAIR iCUE LINK 3500X LX-R RGB is a functional mid-tower chassis designed for optimal airflow and aesthetics. Featuring a tempered glass side panel and a glass front panel, this case allows for a view of your internal components while keeping them protected. The included bottom dust filter helps maintain cleanliness, ensuring long-lasting performance. With ample space for cable routing, this case promotes organized builds. The ability to support a back-connect motherboard provides versatility for your setup. Cooling is managed through a fan system that includes multiple locations for installation, allowing for a configuration that suits a variety of needs. Three 120 mm fans come included, with options for further expansion to accommodate up to three additional fans or multiple radiator sizes. With support for different form factors such as ATX, microATX, Mini-ITX, and Extended ATX, the case meets various requirements. It comes equipped with handy front panel connectors, making your setup easily accessible and user-friendly.
3200D RS Mid-Tower PC Case Supports 360 mm AIO radiators mounted on the top or front. GPU clearance up to 375 mm (400 mm with front fans removed). Advanced cooling options with support for up to 9 x 120 mm fans. Includes 3 × RS120 fans. Angled bottom fan mount for direct GPU cooling. Built-in anti-sag support arm for the graphics card. Compatible with reverse-connector motherboards.
