The Buffalo M730i midi tower ATX case gives PC enthusiasts flexible installation options and seamless operation. With ABS LED strip, RGB light effects finish at front and TG window side panel, users not only can see the system operation while running the program but also can keep their systems cool by assembling the chassis for superb airflow and also visual fun. This new chassis is built by 0.5mm material which brings you strong case structure for better protection on your high end computer system. - Pre-installed 1x 120mm at front bottom, 2x 120mm at top, 1x 120mm atrear (cable length: 450mm, 6P) - Included XBOX-01 10 fan port remote control + hub with AURA, SYNC
Optimized Airflow Design RGB Fusion with ARGB Connector Hub Support Motherboards up to E-ATX Up to 360mm Liquid Cooling Compatible Support Vertical GPU Installation Full-Size Tempered Glass Side Panel With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel Pre-installed 4 ARGB fans C301 GLASS WHITE CPU Height : 170mm GPU Length : 400mm PSU Length : 180mm, MidiTower PSU Not included, Front : 120mm x3 (ARGB); Rear : 120mm x1 (ARGB) Dimensions H=486 W=220 D=473 mm
CTE C750 TG ARGB Snow Full Tower case The CTE C750 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support up to 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB Snow is a high-end presentation case that allows you to imagine something outside the box. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Snow Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance.
Black case with a closed side Efficient cooling with up to seven fans and a radiator up to 360mm Support for large motherboards up to E-ATX and back-connect Space for graphics cards up to 415mm and CPU coolers with a height of up to 184mm Up to six drives possible Three M25-120mm fans already included PHANTEKS XT Silent: Compact and simple midi-tower The PHANTEKS XT Silent fits into any setup with its simple black design. It offers extensive options for installing your high-end hardware. To keep your system cool even at full power, there is plenty of space for fans and radiators. Effectively cooled with fans and radiators To ensure your high-end components do not overheat even under full load, up to seven fans can be installed in the midi-tower. The top supports either up to three 120mm or two 140mm fans. Additionally, three more 120mm fans can be installed on the mid-plate. The rear also allows for a 120mm or 140mm fan. Furthermore, three PHANTEKS M25-120mm fans are already included in the package. If you prefer water cooling - whether an all-in-one water cooling system or a custom-built water cooling solution - there are two locations to install a radiator. A maximum 360mm radiator can be mounted at the top, and another 120mm radiator at the rear. With these fan and radiator options, your system will not lose performance. Hardware installation The midi-tower supports the installation of large graphics cards up to 415mm in size. Consequently, the current NVIDIA GPUs of the 40 series are also possible. Motherboards up to E-ATX format can be accommodated. To avoid messy cable clutter, you can also install motherboards with back-connect. The CPU cooler should not exceed a height of 184mm. On the other hand, there are hardly any limits for the power supply, as it can be up to 270mm long. To store programs and games, up to six drives can be installed: up to three 2.5-inch SSDs can be placed on the side, two more in the power supply chamber, as well as one 3.5-inch drive.
Tootekood: AIR 100 LITE (W)GTIN: 4710562740882Korpused
Small midi tower with tempered glass on the side, up to eight fans, space for a radiator up to 280mm, motherboards up to micro-ATX, GPU up to 330mm, and CPU cooler up to 161mm height, up to four drives possible, two 120mm fans included - Compact case with side panel made of tempered glass - Efficient cooling options with up to eight fans and radiators up to 280mm - Support for motherboards up to Micro-ATX - Space for graphics cards up to 330mm and CPU coolers with a height of up to 161mm - Up to four drives possible - Two 120mm fans included The Montech AIR 100 LITE: Minimalist case with high cooling performance The Montech AIR 100 LITE is the smaller variant of the Montech AIR 100 and impresses with its lightweight and minimalist design. Nevertheless, this Midi-Tower offers you extensive options for installing your hardware - particularly a variety of fans to keep your system cool. Well-cooled with fans and radiators Despite its small size, up to eight fans can be installed in the tower. The front supports a maximum of three 120mm or two 140mm fans. You can install two 120mm or 140mm fans on the top. A further 120mm fan can be installed at the back, as well as up to two additional 120mm fans above the power supply chamber. Two 120mm fans are already included at the front and back. If you prefer liquid cooling - whether it's an all-in-one liquid cooler or a custom-built liquid cooling system - there are several places to install a radiator. The front supports a radiator up to a maximum of 280mm, the top supports a 240mm radiator, and a further 120mm radiator can be installed at the back. Hardware options The Midi-Tower supports the installation of graphics cards up to a size of 330mm. Motherboards are compatible up to the Micro-ATX format. The CPU cooler should not exceed a height of 161mm. To store programs and games, up to four drives can be installed.
USB-A/USB-C Dual 4K/60 Hz HDMI VIDEO adapter Extend your desktop with two external HDMI monitors. The adapter supports 2x 4K resolution 4096 × 2160@60Hz with an audio signal. The adapter is suitable for designers, graphic designers and other users who work with many screens at the same time. Its performance allows you to run even the most demanding applications on one or two independent monitors, making it ideal for editing 4K/60Hz movies or other Ultra HD tasks Thanks to extend and mirror modes (extended and mirrors), you can work with applications on two monitors (e.g. large spreadsheets), work on one monitor and search for information on the Internet on another, compare many documents at the same time without continuous switching between open windows, display panoramic Images on two monitors, display charts and actual data at the same time, display many presentations at the same time without having to have another computer, etc. Universal connectivity: compatible with USB-C, USB and Thunderbolt ports A strong and versatile video adapter that allows you to connect to two monitors at the same time. The adapter supports a resolution up to 2x 4K/60 Hz regardless of the laptop graphics card performance. Support for two HDMI ports. Metal surface for better heat dissipation. Support for two external monitors on Apple M1, M2 and M3 platforms. The adapter is compatible with all main operating systems.
