Full Tower CTE C750 TG ARGB case The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for Centralized Thermal Efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB is a high-end presentation case that allows you to imagine something outside the box. Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE C750 TG ARGB's versatile interior includes two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. Perfect protection against dust There are small details on the top, front, bottom, rear and right side of the housing, removable filters that provide excellent dust protection and can be easily removed for cleaning.
This is proof that the unique appearance of a computer case can go hand in hand with excellent air circulation and capacity useful when creating your own hardware configuration. Krux Vako White RGB is a white version of the legendary Vako housing without even the slightest compromise. Arctic cold inside Excellent airflow in the white Vako is ensured by three efficient, factory-installed RGB fans. They help maintain a low temperature of components, and thus promote quieter operation. Two 140 mm front fans draw cool air into the case, while one with a diameter of 120 mm exhausts it from the back. Snow Queen What undeniably distinguishes Krux Vako White RGB from other housings is its crystal white color. Such a white tower will be a great culmination of an aesthetic streaming setup, or it will better fit into the bright decor of the room. No matter how you use it, it will always soothe your eye with its cool whiteness. Aurora in the fan White is not the only visual advantage of this housing. Pre-installed zone-illuminated RGB fans enhance the appearance of both the external panels and the components inside. Their power supply and backlight are connected with 3-pin plugs, which facilitates compatibility with the power supply. Look inside Like through a crystal ball, you can look through the tempered glass side panel into the Krux Vako White RGB case and admire the beauty of your setup. Moreover, this panel is mounted on magnetic latches. Disassembly and reassembly become very simple, so you don't have to worry about scratches and breaks. Space and accessibility Krux Vako White RGB has great capacity for its size. It can accommodate an ATX motherboard up to 240 mm AIO, and next to it there can be a graphics card up to 310 mm long. There are also four places for drives, and on the floor there is space for a power supply up to 160 mm. The external, upper panel of the housing gives access to three USB ports (including one in the 3.0 standard) and the most necessary audio ports. Krux Vako White RGB - main features: Aesthetic, white casing color Two 140 mm fans behind the front panel and one 120 mm fan with back of the housing Zone RGB lighting Roomy interior Design that ensures good air circulation
Horizon ARGB FLOW Midi White Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
Toetatud emaplaadid: ATX, EATX, micro ATX, Mini-ITX; Piisavalt ruumi tõhusaks jahutamiseks; Optimeeritud õhuringlus; USB-pordid: 2x USB 3.2 Type-A, 1x USB 3.2 Gen 2x2 Type-C
Obudowa do budowy wydajnych komputerów mid tower 5000T Przyciągnij uwagę za pomocą wyjątkowej profilowanej konstrukcji obudowy CORSAIR 5000T, w której możesz zbudować idealny system oparty na płycie głównej z odwróconymi złączami. Elegancka stalowa obudowa o wyjątkowym kształcie Działa z płytami głównymi z odwróconymi złączami Zdejmowane panele przedni i górny z siateczki umożliwiające intensywny obieg powietrza Mieści do 10 wentylatorów 120 mm lub 4 wentylatorów 140 mm oraz kilka radiatorów 360 mm Czyste płótno - brak fabrycznie zamontowanych wentylatorów i podświetlenia System organizacji okablowania RapidRoute EFEKTOWNE LINIEZrób piorunujące wrażenie za pomocą tej eleganckiej obudowy o wyjątkowym wyglądzie. Rozwiązania ułatwiające budowę komputera pozwalają wykorzystać cały potencjał, aby konstrukcja była tam samo imponująca wewnątrz, jak i na zewnątrz. OGROMNY POTENCJAŁ CHŁODZENIAPrzestronne wnętrze pomieści nawet 10 wentylatorów 120 mm albo 4 wentylatory 140 mm, a także kilka radiatorów o wysokości 60 mm, w tym z przodu lub boku - o rozmiarze 360 mm oraz w górnej części o rozmiarze 360 mm w konfiguracji push/pull. PEŁNA FUNKCJONALNOŚĆTa obudowa ma wszystko, czego potrzeba do budowy bardzo wydajnego komputera. ZDEJMOWANE PANELE PRZEDNI I GÓRNYSiateczkowe panele o wyjątkowej konstrukcji, które można łatwo zdjąć, aby dostać się do środka, umożliwiają intensywny przepływ powietrza. DWA OBSŁUGIWANE BEZNARZĘDZIOWO PANELE BOCZNE NA ZAWIASACHŁatwy dostęp do systemu dzięki panelom na zawiasach: jednemu ze szkła hartowanego, eksponującemu wszystkie komponenty, oraz jednemu ze stali z drugiej strony. SYSTEM PROWADZENIA PRZEWODÓW CORSAIR RAPIDROUTEUmożliwia szybkie i łatwe poprowadzenie przewodów przez obszerny 46-milimetrowy ukryty kanał pod płytą główną. OBSŁUGA PŁYT GŁÓWNYCH Z ODWROTNYMI ZŁĄCZAMISprawdzona pod kątem zgodności z płytami głównymi ASUS BTF, MSI Project Zero oraz Gigabyte Project Stealth, które mają złącza z tyłu, dzięki czemu nie psują widoku przez podłączone kable. PROSTA KONSTRUKCJANowoczesna konstrukcja w popularnym formacie obudowy komputerowej 5000T ma wygodne rozwiązania, które ułatwią Ci pracę. PUDEŁKO NA ŚRUBY WIELOKROTNEGO UŻYTKUDzięki dodanemu w zestawie pudełku, w którym wszystkie potrzebne Ci śruby będą bezpiecznie zamknięte, nie zgubisz już żadnej ważnej śrubki. PRZELOTKI FORMOWANE W DWÓCH CYKLACHDzięki miękkim, gumowym przelotkom wewnętrznym umożliwiającym łatwe przeciąganie kabli oraz twardym gumowym przelotkom zewnętrznym, które pewnie trzymają się na miejscu, możesz uniknąć frustracji podczas instalowania przewodów. ŚRUBY QUICKTURN DO WENTYLATORÓWŚruby do wentylatorów CORSAIR QuikTurn są równie wytrzymałe i bezpieczne jak tradycyjne śruby, dzięki czemu montaż wentylatorów w systemie staje się niezwykle prosty. Przydaje się to, gdy wypełniasz obudowę tej wielkości. WIELE MOŻLIWOŚCI CHŁODZENIAStwórz odpowiedni do swoich potrzeb system chłodzenia dzięki miejscu na 10 wentylatorów 120 mm oraz różnorodnym opcjom montażu dwóch radiatorów o maksymalnym rozmiarze 360 mm. NOWOCZESNY PANEL WEJŚĆ/WYJŚĆ Z PRZODUUmożliwia łatwy dostęp do nowoczesnych złączy, w tym do portu USB 3.2 Gen 2 Type-C, 4 portów USB 3.2 Gen 1 Type-A oraz zintegrowanego gniazda audio i mikrofonowego typu jack.
DeepCool CH170 PLUS WH. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Placering af strømforsyning: Top, Understøttede strømforsyning formfaktorer: ATX, PS2, SFX, SFX-L. Understøttede diametre for bagerste ventilatorer: 120 mm, Understøttede diametre for øverste ventilatorer: 120 mm, Understøttede størrelser på bagradiator: 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 195 mm, Dybde: 290 mm, Højde: 424,5 mm
DeepCool CH160 PLUS. Formfaktor: Small Form Factor (SFF), Type: PC, Produktfarve: Sort. Placering af strømforsyning: Top, Understøttede strømforsyning formfaktorer: ATX, PS2, SFX, SFX-L. Understøttede diametre for frontventilatorer: 120,140 mm, Understøttede diametre for bagerste ventilatorer: 120 mm, Understøttede diametre for øverste ventilatorer: 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 195 mm, Dybde: 375 mm, Højde: 323,5 mm
Professional gaming PC case NOCTIS FLOW RGB X1 NOCTIS FLOW RGB X1 a case designed for maximum airflow During intense gameplay, temperature has a real impact on stability, FPS (Frames Per Second), and the overall performance of your computer.The mesh front panel (dense, breathable mesh) on the NOCTIS FLOW RGB X1 increases airflow, keeping components cool even under heavy load. Four RGB fans included full 4-pin PWM control The set includes four 120 mm RGB (Red Green Blue) fans they not only look modern but are highly functional.Thanks to 4-pin PWM (automatic speed control), the system increases fan speed exactly when your processor or graphics card starts working harder. Enhanced AIO cooling system installation wide compatibility In the NOCTIS FLOW RGB X1 you have complete freedom to install AIO (All in One) water cooling: on the top, front, rear, and most importantly in the dedicated side area next to the motherboard.This allows you to create a setup that best suits your graphics card, processor, and gaming style. NOCTIS FLOW RGB X1 offers extended radiator installation options, including space next to the motherboard. Supported configurations: top: 120 / 240 mm, front: 120 / 240 / 280 / 360 mm, next to the motherboard: 120 / 240 mm, rear: 120 mm. This flexible solution lets you tailor the cooling layout to your specific hardware configuration. Compatibility with large components no upgrade limitations The case supports CPU coolers up to 170 mm, graphics cards up to 350 mm, and power supplies up to 180 mm (or 230 mm after removing the HDD cage).This means you can choose exactly the GPU and cooling system that deliver top performance without worrying if everything will fit. Optimized airflow layout up to 10 fans NOCTIS FLOW RGB X1 lets you configure cooling to match your play style: maximum airflow, maximum silence, perfectly balanced. With 10 potential fan mounting spots, you get full control over your system temperatures. Available positions: 3 × front, 2 × top, 1 × rear, 2 × next to the motherboard, 2 × in the PSU chamber. This layout makes it easy to achieve the optimal balance between cooling and acoustics. Compatibility with ATX / mATX / Mini-ITX motherboards The case supports three popular motherboard standards: ATX (Advanced Technology eXtended) full-size, most expandable, mATX (Micro ATX) compact but still functional, Mini-ITX the smallest, ideal for mini gaming setups. Flexible drive system configuration tailored to the user Customize your storage setup to match your game library and workflow: more SSDs faster loading and system responsiveness, more HDDs more space for projects, recordings, or streamer archives. The choice is yours the case supports both options. NOCTIS FLOW RGB allows mounting: 2 × HDD 3.5 + 2 × SSD 2.5or 1 × HDD 3.5 + 3 × SSD 2.5. A practical solution for expanding storage space for games, video materials, or fast system drives. Case protected with filters and designed for clean airflow The case maintains high airflow while protecting components with two dust filters (top + bottom), helping extend component longevity. The mesh front panel is complemented by additional dust filters: top, PSU chamber. As a result, the inside of the PC stays clean and components remain stable over time. Ergonomic I/O panel quick access to essential ports The top panel includes: USB-A 3.1 Gen 1 (Universal Serial Bus Type A, 3.1 Gen 1 standard) 2 × USB-A 2.0 HD Audio (High Definition Audio) The ports are easily accessible, making it convenient to connect flash drives, accessories, or headphones without reaching behind the PC. NOCTIS FLOW RGB X1 a case for users who need efficient cooling and full functionality A solid, well-designed structure with high airflow, broad compatibility, and a modern ventilation layout.An ideal choice for gaming PCs, streaming setups, and powerful workstations.
The HYTE X50 is a stylish midi-tower case designed for demanding PC enthusiasts who want to combine design and function. Its innovative internal structure and high-quality build make it perfect for gamers, streamers, and builders who pay attention to detail. Three-chamber layout separates heat sources for optimal airflow. Supports up to ten 120 mm RGB fans for exceptional cooling performance. 360 mm radiator support on both the top and bottom for powerful water cooling. Front and side panels made of mesh for optimal fresh air intake. Magnetic cable management system for effortless, clean builds. HYTE X50: Innovative cooling with clear separation. The HYTE X50 utilizes an intelligent three-chamber design that spatially separates the GPU, motherboard, and power supply. This creates unobstructed airflow, efficiently exhausting heat from the case. With a direct stream of fresh air to your graphics card, you keep it cool even during graphically intensive games or 3D rendering, ensuring a constant supply of air. Design meets functionality. The case impresses with a curved mesh panel on the side, reliably supplying your system with air. Its clean, symmetrical design is both visually striking and thoughtfully constructed. Radiators up to 360 mm can be installed at the top and bottom, providing space for high-end water cooling setups. Modular interior and easy installation. Building your system is made extremely easy by thoughtful details such as magnetically sealed cable guides, tool-free front and side panels, and flexible mounts. Additionally, the USB-C port on the front offers lightning-fast access with up to 20 Gbit/s — ideal for modern peripherals and fast data transfers.
Three-Chamber Design for Maximum Thermal Performance Dedicated CPU cooling chamber Two airflow channels for efficient circulation in the main compartment Two curved French-door tempered glass panels Compatible with motherboards featuring reversed connectors RapidRoute 2.0 cable management system Three RS-R 120mm PWM ARGB fans with reversed blades THREE IS BETTER THAN TWOTHREE-CHAMBER DESIGN The unique three-chamber layout isolates hot components, providing efficient cooling and peak performance in any situation. Separate chambers for the CPU, GPU/motherboard, and PSU, cables, and storage deliver superior thermals and simplify the building process. WORLD-CLASS ENGINEERINGUNMATCHED PERFORMANCE Designed from the ground up by our world-class engineers, the AIR 5400 case is a masterpiece of precision, performance, and thoughtful design. BIG GRAPHICS CARDS WELCOMEOPTIMAL AIRFLOW TO THE GPU The spacious interior is designed to accommodate even the most powerful graphics cards. Two dedicated airflow channels direct cool air over the GPU for maximum performance. UNLOCK THE VIEWARGB FANS WITH REVERSED BLADES Factory-installed RS-R ARGB 120mm fans with reversed blades at the bottom of the case provide efficient, quiet cooling with stunning, uninterrupted RGB lighting. Fans can be daisy-chained and connected to the motherboards PWM and +5V RGB headers for easy control of lighting and fan speed. STUNNING VISUALSTWO CURVED FRENCH-STYLE GLASS DOORS Two glass panels meet at the corner and swing outward on hidden hinges, offering a seamless appearance and easy access to hardware. ADVANCED CABLE MANAGEMENTRAPIDROUTE 2.0 RapidRoute 2.0 makes cable management effortless. The motherboard tray with a perforated wall allows cable ties to be repositioned easily, keeping your build neat and organized. MULTIPLE COOLING OPTIONS The AIR 5400 comes with three 120mm intake fans with reversed blades at the bottom and provides seven times more space in the CPU chamber, top, and rear, ensuring highly efficient airflow in both chambers. MODERN FRONT I/O PANEL Provides easy access to ports, including a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 1 Type-A ports, and integrated 3.5mm audio and microphone jacks.
Deepcool Wave V2 Black Micro ATX Case Experience the perfect blend of style and functionality with the Deepcool Wave V2 Black Micro ATX Case. Made from durable SPCC and ABS plastic with a sleek black finish, this case is designed to house Micro ATX and Mini-ITX motherboards. It features convenient I/O connectors including 1×USB3.0, 2×USB2.0, and audio and mic jacks. Weighing just 3 kg, this case is a lightweight and efficient choice for your next PC build.
Das Elite 690 verfügt über zwei gehärtete Glasscheiben, die Ihr System in Szene setzen, während eine holzstrukturierte Front und ein Mesh-Einlass Wärme mit effizientem Luftstrom verbinden. Dank der oberen und unteren Belüftung für vertikale Kühlung unterstützt es vielseitige Lüfter- und Kühlerkonfigurationen – perfekt für leistungsorientierte oder stilvolle Systeme. Die vertikale Anordnung trennt die Wärmezonen für eine bessere Luftzirkulation und eine sauberere Kabelführung. Bis zu 10 Lüfter in einer von unten nach oben verlaufenden Anordnung maximieren den Luftstrom und die Kühlung. Die aus echtem Holz gefertigte Frontplatte verleiht jedem Raum eine warme, organische Note. Das Gehäuse enthält 3 in Reihe schaltbare ARGB-Lüfter mit vollständiger Unterstützung für die Beleuchtungssynchronisierung des Motherboards. Das Elite 690 verfügt über einen USB 3.2 Gen 2x2 Typ-C und zwei USB 3.0-Anschlüsse für blitzschnelle Konnektivität.
Das Elite 481 Wood bringt eine warme, wohnliche Ästhetik in leistungsstarke PC-Builds. Mit einem kompakten mATX-Layout mit zwei Kammern und einer aus echtem Naturholz gefertigten Frontblende verbindet es moderne Leistung mit organischen Designelementen. Mit nahtlosem Hartglas, vertikaler Kühlungsunterstützung und Kompatibilität mit Full-Size-Radiatoren ist das Elite 481 Wood ein vielseitiges Gehäuse, das mühelos in Wohnräume, Kreativstudios oder stilvolle Gaming-Setups passt. Die einzigartige Frontblende aus echtem Holz sorgt für einen natürlichen, warmen Farbton, der zu Wohnräumen, kreativen Umgebungen und Spielzimmern gleichermaßen passt und Technologie mit Lifestyle verbindet. Zwei Scheiben aus gehärtetem Glas mit abgeschrägten 45°-Kanten ermöglichen einen klaren Panoramablick auf Ihre Komponenten und Ihre Beleuchtungseinrichtung. Getrennte Bereiche für Hardware und Kabel sorgen für einen effizienten Luftstrom und ein übersichtliches Layout. Die rechte Kammer enthält ein oben montiertes Netzteil und 95 mm Platz für das Kabelmanagement. Unterstützt bis zu 9 Lüfter mit einem von unten nach oben verlaufenden Luftstrom, der die Wärmeabfuhr beschleunigt und eine optimale Systemleistung bietet. Trotz seiner kompakten Größe unterstützt das Elite 481 Wood zwei 360-mm-Radiatoren (oben und unten) und einen 280-mm-Radiator an der Seite - eine flexible Kühlung auf ATX-Niveau. Das Gehäuse enthält 3 ARGB-Lüfter - 2 seitliche Ansauglüfter mit umgekehrten Blättern und 1 rückwärtiger Abluftlüfter. Jeder Lüfter verfügt über Daisy-Chain-Anschlüsse für ein sauberes Kabelmanagement und eine optimierte Einrichtung und ist vollständig kompatibel mit der ARGB-Software der wichtigsten Motherboards für eine synchronisierte Beleuchtungssteuerung. Mesh-Paneele an der Ober- und Unterseite sorgen für eine ausreichende Luftzirkulation und verbessern die thermische Effizienz. Mit zwei USB 3.0 Typ-A-Anschlüssen und einem USB 3.2 Gen 2x2 Typ-C-Anschluss mit einer Übertragungsgeschwindigkeit von bis zu 20 Gbit/s - perfekt für schnellen Datenzugriff und moderne Gerätekonnektivität
Three-chamber design for maximum thermal performance Dedicated CPU cooling chamber Two airflow channels for efficient circulation in the main compartment Two curved French-door tempered glass panels Compatible with motherboards with reversed connectors RapidRoute 2.0 cable management system Three iCUE LINK LX-R RGB 120mm fans with reversed blades and system hub THREE IS BETTER THAN TWOTHREE-CHAMBER DESIGN The innovative three-chamber design isolates hot components, ensuring effective cooling and maximum performance under any condition. Separate chambers for the CPU, GPU/motherboard, and PSU, cables, and storage deliver exceptional thermals and simplify the building process. WORLD-CLASS ENGINEERINGUNMATCHED PERFORMANCE Engineered from the ground up by our world-class designers, the AIR 5400 case is a masterpiece of precision, performance, and thoughtful construction. BIG GRAPHICS CARDS WELCOMEOPTIMAL AIRFLOW TO THE GPU The spacious interior is designed to accommodate even the most powerful graphics cards. Two dedicated airflow channels direct cool air across the GPU, ensuring peak performance. UNLOCK THE VIEWiCUE LINK LX-R FANS WITH REVERSED BLADE Factory-installed iCUE LINK LX-R RGB 120mm fans with reversed blades at the bottom provide efficient, quiet cooling and uninterrupted RGB lighting. The included system hub supports up to 24 iCUE LINK devices, allowing you to power additional fans with just one cable. STUNNING VISUALSTWO CURVED FRENCH-STYLE GLASS DOORS Two glass panels meet at the corner and swing outward on hidden hinges for a seamless look and easy access to your components. ADVANCED CABLE MANAGEMENTRAPIDROUTE 2.0 RapidRoute 2.0 makes cable management effortless. The new motherboard tray with a perforated wall allows cable ties to be easily repositioned, keeping your build clean and organized. MULTIPLE COOLING OPTIONS The AIR 5400 comes with three 120mm intake fans with reversed blades at the bottom and offers seven times more space in the CPU chamber, top, and rear for highly efficient airflow throughout the case. MODERN FRONT I/O PANEL Provides easy access to ports, including a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 1 Type-A ports, and integrated 3.5mm audio and microphone jacks.
No. of drive bays: 4 Dimensions: 3985 x 185 x 345 mm Other features: - Space for additional fans: 2- Side window and front panel made of tempered glass- Pollen filters, bottom and top of the housing
Tootja: AKYGA Tootegrupp: arvutikorpus arvutikorpuse tüüp: ATX Ümbrise tüüp (motherboard type): ATX, MicroATX, Flex ATX, MINI ITX Supported toiteploki standards: ATX external 3,5"sahtleid: 0 external 5,25"sahtleid: 1 external 5,25" väikseid sahtleid: 0 internal 2,5"sahtleid: 3 internal 3,5"sahtleid: 3 intenal 5,25"sahtleid: 1 paigaldatud toiteplokk(ies): Ei maksimum toiteplokke: 1 toiteploki võimsus: andmed puuduvad elektripesade pistikuid Serial ATA: andmed puuduvad ATX toiteploki ühenduspesa tüüp: andmed puuduvad +12V elektripesa tüüp: andmed puuduvad I/O Ühendusi: 1x stereo mini-jack (kõrvaklappide väljund), 1x stereo mini-jack (mikrofon input), 2x USB 3.0, 1x USB 2.0 ventilaatori kiiruse regulaator: Ei paigaldatud ventilaatoreid: 0 maksimaalne kogus of fans: 3 laius: 200 mm pikkus: 418 mm kõrgus: 412 mm pesade arv korpuses: 7 tk külje õhukanal: Jah tööriistavaba kokkupanek: Ei värv: must Lisaomadused: andmed puuduvad Lisainfo: Product Site
Chassis INTER-TECH A-3411 Creek Gaming Tower, ATX, 1xUSB3.0, 2xUSB2.0, PSU optional, Window side panel, LED light on the front, integrated RGB LED, Black
Housing type: Midi Tower ATX Motherboard format acceptable: m-ATX, ATX, Extended ATX, mini ITX 5.25 "bays (external) - 3.5 "bays (internal) 3 pcs 2.5 "bays (internal) 4 pcs The number of expansion slots: 7 +3 pcs. USB socket on the front panel: 1 x USB 3.0, 2 x USB 2.0 Front panel microphone jack: 1 piece. Headphone jack on the front panel: 1 piece. Tool-free assembly: No Height: 487 mm Width: 230 mm Depth: 440 mm Number of fans installed: 5 pcs (2x RGB LED front 20 cm., 1x RGB LED rear 14 cm., 2x top 14 cm) Number of places for additional fans: 0 Maximum length of graphics cards: 370 mm The maximum height of the CPU heat sink: 180 mm Water cooling support: Yes (Front: 360mm; Rear: 120mm) Housing color: Black and silver More information: Dust filter x 3 Tempered glass on the side of the housing LED backlight. Removable side panel 90 degree inverted HD cage Bottom mounted power supply. Cable arrangement system Kit contents: Remote control to control the backlight, screws, cable ties.
Internal 6x 2.5 "/3.5", 2x 2.5 ", 8x 2.5" /3.5 "(optional), 2x 2.5" (optional), Front I / O 1x USB-C 3.1 (20-pin Key-A header), 2x USB-A 3.0, 1x microphone, 1x headphones, PCI slots 9 (2x riser card), Fan (front) 2x 140mm, 1000rpm, 18.9dB (A) or 3x 140mm (optional), Fan (rear) 1x 140mm, 1000rpm, 18.9dB (A), Fan (top) 3x 140mm (optional), Fan (other) 2x 140mm (optional), Radiator sizes 120/140/240/280 / 360mm in front, 120/140/240/280/360 / 420mm above, 120/140/240 / 280mm below, 120mm in the back, Mainboard up to ATX (285mm wide), Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6") / E-ATX (12 "x11.2"), Power supply ATX (max. 250mm deep), PSU position below, CPU cooler max. 185mm height, Graphics cards max. 315mm (491mm without HDD cage without front fan, 467mm without HDD cage with front fan), Color black, inside black, Lighting without lighting, Dimensions (WxHxD) 240x475x541mm, Volume 61.67l, Weight 10.50kg, Enclosure type miditower, Special features Cable management, dust filter, integrated fan control, window made of glass, Note Mainboard and case manufacturers refer to different dimensions as E-ATX. Mainboards with E-ATX / SSI EEB dimensions of 305x330mm or 12 "x13" are not supported, w/o psu, FD-C-MES2A-03
Internal 2x 3.5 "(transverse, hard drive cage), 2x 2.5", Front I / O 2x USB-A 3.0, 1x headphones, 1x microphone, PCI slots 4, Fan (front) 3x 120mm (optional) or 2x 140mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 320mm, Color white, inside black, Lighting without lighting, Dimensions (WxHxD) 225x431x400mm, Volume 38.79l, Weight 6.20kg, Housing type minitower, Special features Cable management, dust filter, graphics card holder, viewing window made of glass, w/o psu, R-MACUBE110-WHNGM1N-G-1
No. of drive bays: 4 Dimensions: Product dimension: (L x W x H) 407 x 215 x 455 mm Weight: 5.39 Other features: PCI expension slots: 7 Dust filter: 1 x top, 1 x bottom(PSU), 1 x front Fans control by: Motherboardremote controllerLED buttonVoice control/ Fans included: 4 x 120 mm ARGB, 6 pin, 1200 RPM (3 x front, 1 x rear) connected to the controller Fan support: front: 3 x 120/140 mm lub 2 x 200 mm rear: 1 x 120 mm top: 2 x 120 (140) mm bottom: 2 x 120 mm Watercooling support: front: 1 x 120/240/360 mm rear: 1 x 120 mm top: 1 x 120/240 mm Product dimension: (L x W x H) 407 x 215 x 455 mm Chassis material: SPCC 0.6 mm Front Panel Material: Big hole mesh Net/gross weight: 5.39 / 6.04 kg
Corsair mid-tower 3000D tempered glass case, black The CORSAIR 3000D AIRFLOW mid-tower ATX case provides intensive air circulation and excellent cooling. A steel front panel and two pre-installed CORSAIR SP120 ELITE fans ensure optimal airflow through the case, while a tempered glass side panel allows for easy viewing of components. Up to 8 120mm fans or up to 4 140mm fans can be accommodated in the intelligently organized interior. With room for radiators up to 360mm in size, support for 3.5" and 2.5" drives, and support for four-slot graphics cards up to 360mm in length, you can create a high-performance system. The front I/O panel has two USB 3.2 Type A ports and a microphone and headphone jack. Outstanding Cooling Capabilities: Spacious interior holds up to 8 x 120mm cooling fans or 4 x 140mm fans with multiple heatsinks including one 360mm front and one 280mm on top (depending on the height of the memory modules) RAM). CORSAIR AirGuide Technology: The two pre-installed SP120 ELITE fans generate 24.7 dBA of noise and feature CORSAIR AirGuide technology that increases static pressure and directs airflow for better cooling. Dedicated graphics card cooling: The case accommodates the latest graphics cards and has two additional 120mm fan mounts on the PSU shroud that allow you to install fans directing the airflow directly to the graphics card. Four-slot graphics capability: For an advanced, high-performance computing setup, you can freely install a four-slot graphics card up to 360mm in length into the chassis. Optimized front panel for intensive air circulation: The optimized steel front panel provides powerful airflow in the system for maximum cooling. Tempered glass side panel: Show off your internal components in elegant style. All the storage you need: Holds up to 2 SSDs and 2 HDDs.
CORSAIR 3000D RGB mid-tower Tempered Glass Black The CORSAIR 3000D RGB AIRFLOW mid-tower ATX case features intensive airflow powered by three high-performance factory-mounted CORSAIR AR120 RGB fans for superior cooling and fantastic lighting effects. The addition of a tempered glass side panel turns your PC into a state-of-the-art computer technology display. The intelligently laid out interior holds up to 8 x 120mm fans or 4 x 140mm fans. With room for radiators up to 360mm in size, support for 3.5" and 2.5" drives, and support for four-slot graphics cards up to 360mm in length, you can create a high-performance system. The front I/O panel has two USB 3.2 Type A ports and a microphone and headphone jack. Outstanding Cooling Capabilities: Spacious interior holds up to 8 x 120mm cooling fans or 4 x 140mm fans with multiple heatsinks including one 360mm front and one 280mm on top (depending on the height of the memory modules) RAM). A complete mid-tower package: A mid-tower ATX case with a sleek, high-airflow design and three pre-installed CORSAIR AR120 RGB fans for superior cooling and compelling lighting effects. Dedicated graphics card cooling: The case accommodates the latest graphics cards and has two additional 120mm fan mounts on the PSU shroud that allow you to install fans directing the airflow directly to the graphics card. Three-slot graphics support: For an advanced, high-performance computing setup, you can freely install a three-slot graphics card up to 360mm in length into the chassis. Optimized front panel for intensive air circulation: The optimized steel front panel provides powerful airflow in the system for maximum cooling. Tempered glass side panel: Show off your internal components in elegant style All the storage you need: Holds up to 2 SSDs and 2 HDDs.
