Horizon ARGB FLOW Midi White Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
Minimalist mini-tower, includes one Mercury AM120S fan, supports up to five fans, accommodates GPUs up to 340 mm / CPUs up to 162 mm in height, supports up to three drives, radiator up to 240 mm, 1x USB-C / 2x USB-A
Black/white Midi-Tower, extravagant design with panoramic window, for motherboards up to ATX format, exceptionally good airflow, two different motherboard positions, 2x USB-A ports on the I/O panel
Darkflash DB460M computer case (black)Darkflash DB460M is a reliable computer case designed for all gamers looking for a combination of functionality and aesthetics. It offers a spacious interior for convenient installation of graphics cards up to 420 mm in length, a tempered glass side panel, a full mesh front panel and excellent cooling options (up to 12 fans and a 360 mm radiator can be installed). The chassis looks sleek, and is compatible with M-ATX and ITX motherboards and equipped with USB 3.0 ports for fast data transfer.Minimalist designThe DB460M chassis features a tempered glass clamshell side panel - which opens without tools, greatly speeding up access to components and simplifying computer upgrades. The mesh front panel emphasizes the gaming character of the case, and what's more, it provides maximum airflow, supporting efficient cooling even during intensive work. As a result, you are assured that the inside of your PC is further protected.Designed with expansion in mindThe interior of the DB460M has been laid out to allow convenient installation and replacement of components when the need arises. The case supports M-ATX and ITX format motherboards, and its spacious design allows for graphics cards up to 420 mm in length and CPU coolers up to 174 mm in height. There are also 4 standard PCle slots at your disposal, optimized for 5 slots,which ensure compatibility with high-performance GPUs.Exceptional cooling performanceThe Darkflash DB460M allows you to install up to 12 120mm fans or 4 140mm fans, which translates into excellent heat dissipation from inside your PC. The case also supports the installation of water cooling - it is possible to mount a heatsink up to 360 mm in length, making it an ideal choice for systems requiring high thermal performance.Connectors and full functionalityOn the front of the case you will find USB 3.0 ports and two USB 2.0 connectors for fast data transfer and convenient connection of peripheral devices. As a result, the DB460M will prove itself both as a base for a gaming kit and a high-performance workstation.High build quality and aestheticsDarkflash DB460M is a combination of exceptional design, careful workmanship and high-quality materials. The case's clean lines, thoughtful cable layout and modernistic design make it a practical as well as stylish centerpiece of any computer workstation. The components of your equipment have never looked so good before! ManufacturerDarkflashModelDB460MHousing typeBig TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5'HDD x2, 2.5'SSD x2Expansion card slots4Max PSU length240 mmMax length of graphics card420 mmMax height of CPU cooler174 mmMax number of fans12Fan mounting optionsRear: 120 mm x1; Top: 120 mm x3/140 mm x2; Bottom: 120 mm x3; Front: 120 mm x3/140 mm x2Water cooling mounting optionsTop 360/280/240 mm; Rear 120 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AUDIOMaterial0.5 mm SPCCColorBlackHeight410 mmWidth220 mmDepth470 mm
Compact dimensions, including a carrying handle – Perfect for taking with you High-quality steel, front and top panels with fine perforations for airflow Excellent workmanship Space for 240mm radiators Supports full-size gaming graphics cards Supports Mini-ITX and Micro-ATX motherboards Space for powerful SFX power supplies Excellent space utilization and a thoroughly well-thought-out concept Building a compact desktop mini-host is not only fun, but also presents some challenges. As the case size decreases, conflicts such as compatibility, heat dissipation, and the assembly experience increase. Compact design with high compatibility The material of the case is up to 2 mm thick and features a large number of mesh openings to improve heat dissipation while also providing eye-catching aesthetics. The removable handle, 2 mm thick, allows for easy mobility and can be effortlessly mounted and dismounted without affecting the internal hardware installation. It is attached to the case with a screwless hook connection, so when removed, there are no screw holes to impact the appearance. Space-saving yet powerful With a volume of only about 20 liters, it fits easily into various desktop environments. The main dimensions are 370 mm * 186 mm * 295 mm (depth/width/height, excluding handles/feet and other protrusions) and allow for compatibility with full-size Micro-ATX motherboards and long graphics cards, which almost match the dimensions of an ITX case. Maximum performance in small space It supports 240 mm radiators with a thickness of 30 mm. Thanks to the pull-out bracket, installation is easier and the difficulty of installing hardware in tight spaces is effectively reduced. The Z20 case is compatible with CPU coolers up to a height of 164 mm. Combined with top-mounted fans and a rear-mounted fan, CPU heat can be quickly dissipated. Important: When installing an Intel CPU, the cooler height limit is 164 mm; when installing AMD CPUs, the cooler height limit is 163 mm.
With the D32 series, Jonsbo targets everyone who wants to build their system in a space-saving way. Compared to the D32 PRO, the D32 STD PC case offers the most important features such as back-connect or minimal front I/O, catering to the midrange and budget segment. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for back-connect motherboards Tempered glass side panel ensures a subtle appearance Plenty of space for cooling solutions allows the installation of powerful hardware Dust filter protects your hardware from annoying dust particles The Jonsbo D32 STD Black: Space-saving and subtle case for all kinds of hardware Whether it's a midrange HTPC or a high-end PC, the D32 STD Black from Jonsbo comfortably accommodates various types of builds. The compact case supports graphics cards up to 365 mm in length and CPU coolers up to 164 mm in height. This means that even with the compact design of the case, adequate cooling for your hardware is ensured. Working with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the fans provide tremendous airflow inside the case. No cable clutter with back-connect With back-connect motherboards such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case remains almost completely free of visible cable clutter while using the same amount of space. Since most power and connection cables can be connected at the back of the motherboard, you save on cable management and still get a clean look in your case. Together with the tempered glass side window, your hardware is presented in an especially appealing way. Powerful cooling in a small space To ensure your powerful hardware is sufficiently cooled even in this compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for ample airflow, a large dual-tower CPU cooler, or even a 240 mm AIO, your hardware stays cool even under heavy loads. The dust filter on the bottom and the mesh side panel design ensure your hardware remains free of dust and dirt. This keeps your temperatures at optimal levels and helps extend the lifespan of your hardware.
With the D32 series, Jonsbo appeals to everyone who wants to build their system in a space-saving manner. The D32 STD PC case, compared to the D32 PRO, is aimed at the midrange and budget segments by focusing on key features such as back-connect support or minimal front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for back-connect motherboards Mesh side panel provides a subtle appearance Plenty of room for cooling solutions allows the installation of high-performance hardware Dust filter protects your hardware from annoying dust particles The Jonsbo D32 STD Mesh: A space-saving and discreet case for a variety of hardware Whether it's a midrange HTPC or a high-end PC—you'll find a comfortable fit for all kinds of builds in the Jonsbo D32 STD Mesh. Despite its compact size, the case accommodates graphics cards up to 365 mm in length and CPU coolers up to 164 mm in height. This means that, even with the compact design, your hardware will be adequately cooled. Together with up to six 120 mm fans, or a combination of one 120 mm fan and four 140 mm fans, the case ensures exceptional airflow inside. No cable clutter with back-connect With back-connect motherboards like the BTF series from ASUS, the PROJECT ZERO series from MSI, or the Stealth series from GIGABYTE, the case remains virtually free from visible cable clutter, even in this small footprint. Since most power and connector cables can be attached to the back of the motherboard, you can skip elaborate cable management and still enjoy a clean look inside your case. Strong cooling in a small space To ensure your powerful hardware is properly cooled even in this compact case, Jonsbo has developed an optimal cooling solution for the space available. With six 120 mm fans for ample airflow, a large dual-tower CPU cooler, or even a 240 mm AiO cooler, your hardware will remain cool even under heavy load. The dust filter at the bottom and the mesh-design side panels make sure your hardware stays free from dust and dirt. As a result, your temperatures always remain at optimal levels and the lifespan of your components is extended.
Tootekood: D32 PRO BLACKGTIN: 6970620554327Korpused
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Unlike the D32 STD, the D32 PRO PC case is aimed at the high-end segment with special and practical features such as Back-Connect or improved front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for Back-Connect motherboards Tempered glass side panel ensures a subtle appearance Plenty of room for cooling solutions allows installation of high-performance hardware Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Black: Space-saving and subtle case for high-end hardware Whether you’re building a midrange HTPC or a high-end PC – the D32 PRO Black from Jonsbo comfortably accommodates all kinds of builds. This minimal case fits graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In Back-Connect mode, the maximum CPU cooler height is reduced by around seven millimeters. This ensures that, even with the case’s compact design, your hardware gets adequate cooling. Working together with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the fans ensure enormous airflow inside the case. No cable clutter with Back-Connect With Back-Connect motherboards like ASUS’s BTF series, MSI’s PROJECT ZERO series, or GIGABYTE’s Stealth series, the case in B-mode—with about six to seven millimeters more space—remains almost completely free of visible cable clutter. Since most power and connection cables can be connected at the back of the motherboard, you save time on cable management and still have a clean look inside your case. Combined with the tempered glass side window, your hardware is always on display in an especially appealing way. Powerful cooling in a small space To ensure your powerful hardware stays adequately cooled in this compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for plenty of airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware always stays cool, even under load. Three dust filters on the front, top, and bottom make sure your hardware stays free from dust and dirt. This keeps your temperatures at optimal levels and, among other things, helps extend your hardware’s lifespan.
Darkflash DS900WS computer case (black) + 4 fansDarkflash DS900WS is a modern solution for demanding users who value both aesthetics and functionality. The distinctive design with a panoramic design without an A-pillar, equipped with a single transparent glass wall and a wood and metal front, not only looks impressive, but also provides excellent visibility of components. The case is designed to provide optimal cooling, performance and versatility, while offering ease of modification and expansion of computer systems. The kit includes 4 fans.Durability and aestheticsThe Darkflash DS900WS stands out for more than just its looks. It is an enclosure built with durability in mind. The support mechanism and solid construction ensure stability and security for all computer components, which is especially important when expanding the system.Effective coolingEvery computer needs a good cooling system, and the DS900WS provides it without question. The ability to mount up to 10 120 mm fans and a large 360 mm heatsink makes the case ideal for those who expect high performance and reliability, especially during intensive use. In addition, 4 high-performance fans are included, which blend perfectly with the interior of the case.Protection and ease of useThe case is designed to protect the computer's interior from dust, which is important for maintaining cleanliness and performance. In addition, its clever design makes it easy to upgrade and expand components, which is especially useful for users who want to build exactly the system they want.Compatibility and expansionThe Darkflash DS900WS is compatible with a wide range of motherboards, including ATX, M-ATX and ITX, giving users freedom of choice and flexibility in configuring their systems. Additionally, seven PCI slots allow for further expansion and customization of the chassis. ManufacturerDarkflashModelDS900Enclosure typeMidi TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x2Expansion card slots7Max PSU length250 mmMax length of graphics card425 mmMax height of CPU cooler170 mmMax number of fans10 (120 mm) or 2 (140 mm)Fan mounting optionsTop: 120 mm fan x3 or 140 mm fan x2; Rear: 120 mm fan x1; Side: 120 mm fan x3; Bottom: 120 mm x3Water cooling mounting optionsTop: 240 / 360 mm; Side: 240 mmNumber of fans installed4Type of installed fansARGBButtons and controlsPower, Reset, LEDConnectorsUSB 3.0 x1, USB2.0 x2, HD AudioMaterialTempered glass, 0.5 mm SPCC, wood, metalColorblackHeight454 mmWidth218 mmDepth434 mmWeight6.53 kg
Tootekood: P40 PRISM PLUS BLACKGTIN: 8800263650644Korpused
P40 Prism Plus Black Case Showcase your build with dazzling design The P40 Prism PLUS, with three tempered glass panels, creates a sense of openness and enhances your system build with a modern aesthetic. Premium Tempered Glass Panels Using 4 mm thick tempered glass, the P40 Prism PLUS offers exceptional durability. Uninterrupted panoramic view with three-sided tempered glass A new design paradigm eliminates the case frame, providing an open-space feel and an unobstructed view. The front, side, and top tempered glass panels create a seamless look. Tool-free tempered glass panels The front, side, and top panels can be easily and fully removed, providing convenient access to your PC components. The top glass panel uses a thumb screw for easy handling. Easy panel management with bottom mounting groove The new tapered, tool-free mounting mechanism allows panels to be attached and removed easily, while preventing panel deformation from impacts. Sturdy triangular support structure The solid triangular glass mounting structure can hold up to 35 kg, ensuring stability for all three glass panels. Full-mesh side panel for optimal airflow The ventilation opening on the full-mesh side panel sits above the motherboard, providing optimal airflow. Efficient cable management with optimal routing design A 33 mm cable space helps keep cables organized. Convenient layout and spacing make cable management simple and maintain a clean look. Rubber grommets for neat cable management The well-designed cable layout makes it easy to keep cables tidy and ensures a sleek, organized appearance.
The LC Power 2004MB-V3 Tower Chassis is designed for users looking for a reliable and functional case that supports various components while maintaining efficient airflow. Crafted from both plastic and metal, this chassis provides durability and features a well-organized internal layout thanks to the integrated cable management system, making it easier to build and maintain a clean setup. With support for multiple motherboard formats including micro ATX and Mini-ITX, this chassis offers versatility for different builds.
The IT-8862 ATX case impresses with its modern design, generous features, maximum flexibility, and special extras. With its various connectivity options and high drive capacity, it is ideal for high-performance gaming systems, professional workstations, or storage-intensive applications. Equipped with USB-C 3.2 Gen2 for ultra-fast data transfers, along with an additional USB-C 3.2 Gen1, a USB-A 3.2 Gen1, and a classic USB-A 2.0, the IT-8862 offers full connectivity for both modern and proven peripherals.
PC case Mars MC-INFINIOLITE ATX black The MC INFINIOLITE brings Mars Gaming's "infinity" design to a more accessible form factor, maintaining the premium aesthetics and dual-chamber structure of the INFINIOLITE model, but leaving you total freedom to choose your own cooling. Its frameless continuous curved tempered glass, combined with the glass top panel, offers a spectacular panoramic view of the interior, ideal for gaming or content creation setups looking to excel in both performance and image.
Das Thermaltake View 390 Air Mid Tower Chassis ist die perfekte Wahl für anspruchsvolle Gamer und PC-Enthusiasten, die Wert auf Funktionalität und Ästhetik legen. Mit seinem modernen Design in Schwarz und einer Vielzahl an innovativen Features bietet es maximale Anpassung und Performance. Herausragende Hardware-Unterstützung: Platz für CPU-Lüfter bis 160 mm, Grafikkarten bis zu 420 mm und Netzteile bis 200 mm. Erweiterungsmöglichkeiten: Bis zu 11 Lüfter oder Radiatoren bis 360 mm für eine leistungsstarke Kühlung. Kompatibilität mit Hidden Connector Mainboards: Voll kompatibel mit ASUS und MSI Hidden Connector Mainboards für eine innovative Bauweise. Zwei vorinstallierte CT120-Lüfter sorgen für optimale Kühlleistung direkt ab Werk. Dieses Gehäuse ist nicht nur ein technisches Kraftpaket, sondern auch ein Blickfang für jeden Gaming-Rig. Mit einem exzellenten Preis-Leistungs-Verhältnis ist das Thermaltake View 390 Air die ideale Wahl für leistungsstarke PC-Builds. Optimieren Sie Ihre Gaming-Erfahrung – jetzt mit dem Thermaltake View 390 Air!
Das Thermaltake TR100 WS ist ein 18,4-Liter-SFF-Gehäuse (Small Form Factor), das mit vielen Details aufwartet. In der rechten Kammer befinden sich das Mini-ITX-Motherboard und das SFX-Netzteil, während die Grafikkarte in der linken Kammer untergebracht ist und über das beiliegende PCI-e 4.0 Riser-Kabel mit dem Motherboard verbunden ist. Über diesen wichtigen Komponenten befindet sich das Kühlsystem: Das TR100 ist in der Lage, einen 280 mm AIO zu beherbergen, um die Wärme von der CPU abzuführen. Alle Paneele sind gut belüftet und abnehmbar, um die Kühlleistung in einem kompakten Formfaktor zu bieten, und die Benutzererfahrung beim Aufbau eines PC-Systems mit TR100 zu vereinfachen. TR100 hat zwei separat erhältliche Zubehörteile: das 3,9“ LCD-Bildschirm-Kit das an der Vorderseite des TR100 installiert werden kann, und das TT Traveling Suite Case, das das System sicher schützt, wenn Sie unterwegs spielen wo auch immer Sie sind.
Das Hyte Y70HYTE Y70 HSR Firefly ist ein verbessertes, modernes, ästhetisches ATX-Mid-Tower-Gehäuse mit zwei Kammern, das Gaming-Erlebnisse der nächsten Generation mit massiven vertikalen 4 Steckplätzen bietet und maximale Leistung durch enorme Kühlkapazität ermöglicht. Gleichzeitig feiern Sie Ihre Lieblingshardware, indem Sie Ihren PC so präsentieren, wie er gesehen werden sollte. Im Lieferumfang des Gehäuses ist ein luxuriöser PCIE 4.0 x 16-Riser mit einer farblich abgestimmten Haube für einen ununterbrochenen visuellen Fluss enthalten, der für eine schmerzlose GPU-Installation und einen reibungslosen Build-Prozess sorgt. Es ermöglicht auch eine Fülle von PCIE-Karten mit halber Höhe, die hinter dem Thron der vertikalen Grafik sitzen. Ein geräumiger Innenraum bietet Platz für einen bis zu 360 mm langen und 125 mm dicken Heizkörper an der Seite und eine verstellbare obere Halterung, die oben einen 360-mm-Kühler mit einer Dicke von bis zu 68 mm aufnehmen kann. Zusammen mit der kalten Bodenkühlung an der Unterseite und einem zusätzlichen Lüfter an der Rückseite des Gehäuses verfügt das Y70 über eine Gesamtkapazität von 10 Lüftern in einem vollständig bestückten Gehäuse. Mit über 180 mm Abstand zum Seitenglas werden Enthusiasten von Luft- und Wasserkühlung gleichermaßen die Flexibilität zu schätzen wissen, die ihnen das Gehäuse bietet, um die robustesten Kühlkonfigurationen zu schaffen, die möglich sind.
Das ENDORFY Signum M30 Air ist ein kompaktes microATX-Gehäuse mit vielseitigen Konfigurationsmöglichkeiten. Das luftige Design mit Mesh-Front, drei vorinstallierten Stratus 120 PWM-Lüftern und Staubfiltern hilft dabei, stabile Temperaturen zu halten. Das Seitenteil aus gehärtetem Glas sowie der schnelle USB-C-Anschluss unterstreichen den modernen Charakter des Gehäuses. Das Signum M30 Air wurde für eine effiziente Kühlung der Komponenten entwickelt. Die vordere Mesh-Front wird von zwei vorinstallierten Lüftern unterstützt, was für einen ungehinderten Luftstrom ins Innere sorgt. Die warme Luft wird durch den hinteren Lüfter sowie den perforierten oberen Bereich des Gehäuses effektiv abgeführt, was stabile Temperaturen im Betrieb unterstützt. Das Gehäuse bietet Platz für bis zu sieben 120-mm-Lüfter. Zwei magnetische Staubfilter sowie die Mesh-Front, die ebenfalls als Staubfilter fungiert, lassen sich werkzeuglos abnehmen und leicht reinigen. Im Lieferumfang des Signum M30 Air sind drei werkseitig montierte Stratus 120 PWM-Lüfter enthalten, die an einen vorinstallierten PWM-Splitter angeschlossen sind. Dadurch reicht ein einzelner 4-Pin-PWM-Anschluss aus, um die Lüfter über das Mainboard zu steuern. Die gemeinsam mit Synergy Cooling entwickelten Lüfter verbinden hohe Leistung mit leisem Betrieb. Das hochwertige FDB-Lager sorgt für eine lange Lebensdauer, während die PWM-Steuerung eine präzise Regelung der Drehzahl ermöglicht – inklusive Fan-Stop-Modus. Das Seitenteil aus gehärtetem Glas verleiht dem Gehäuse ein modernes Erscheinungsbild und setzt die verbauten Komponenten gekonnt in Szene. Der Raum hinter dem Mainboard-Tray sowie sinnvoll platzierte Kabeldurchführungen und Befestigungspunkte für Kabelbinder erleichtern eine saubere Kabelführung. Eine ordentliche Verlegung der Kabel verbessert nicht nur die Optik im Inneren, sondern unterstützt auch einen besseren Luftstrom. Das schlanke Zweikammer-Design wurde für microATX-Mainboards konzipiert und ist zudem mit den kleineren Formaten Mini-ITX und FlexATX kompatibel. Das Signum M30 Air bietet Platz für moderne Komponenten, darunter lange Grafikkarten mit bis zu 345 mm Länge, leistungsstarke Kühllösungen wie Luftkühler bis 159 mm Höhe sowie 240-mm-Radiatoren. Zusätzlich lassen sich mehrere Datenträger verbauen:zwei 2,5"- und zwei 3,5"-Laufwerke. Vier Erweiterungsslots mit verschraubbaren Slotblenden erleichtern die individuelle Konfiguration des Systems. Auf der Oberseite des Gehäuses befindet sich ein funktionales I/O-Panel für den schnellen Zugriff auf häufig genutzte Anschlüsse. Zur Verfügung stehen zwei USBA 3.2 Gen 1 Ports, zwei 3,5-mm-Audiobuchsen für Kopfhörer oder Lautsprecher und Mikrofon sowie ein besonders schneller USB-C 3.2 Gen 2×2 Anschluss mit bis zu 20 Gbit/s. So kannst du moderne Geräte und Zubehör bequem anschließen –ganz ohne Adapter.
FULL ATX 3X14CM FANS NOISE ABSOR A new Full-ATX Case with aluminum front panel and great airflow, silence and plenty of space for a whole lot of HDD's and opticals...
