Compact dimensions, including a carrying handle – Perfect for taking with you High-quality steel, front and top panels with fine perforations for airflow Excellent workmanship Space for 240mm radiators Supports full-size gaming graphics cards Supports Mini-ITX and Micro-ATX motherboards Space for powerful SFX power supplies Excellent space utilization and a thoroughly well-thought-out concept Building a compact desktop mini-host is not only fun, but also presents some challenges. As the case size decreases, conflicts such as compatibility, heat dissipation, and the assembly experience increase. Compact design with high compatibility The material of the case is up to 2 mm thick and features a large number of mesh openings to improve heat dissipation while also providing eye-catching aesthetics. The removable handle, 2 mm thick, allows for easy mobility and can be effortlessly mounted and dismounted without affecting the internal hardware installation. It is attached to the case with a screwless hook connection, so when removed, there are no screw holes to impact the appearance. Space-saving yet powerful With a volume of only about 20 liters, it fits easily into various desktop environments. The main dimensions are 370 mm * 186 mm * 295 mm (depth/width/height, excluding handles/feet and other protrusions) and allow for compatibility with full-size Micro-ATX motherboards and long graphics cards, which almost match the dimensions of an ITX case. Maximum performance in small space It supports 240 mm radiators with a thickness of 30 mm. Thanks to the pull-out bracket, installation is easier and the difficulty of installing hardware in tight spaces is effectively reduced. The Z20 case is compatible with CPU coolers up to a height of 164 mm. Combined with top-mounted fans and a rear-mounted fan, CPU heat can be quickly dissipated. Important: When installing an Intel CPU, the cooler height limit is 164 mm; when installing AMD CPUs, the cooler height limit is 163 mm.
The Phanteks XT M3 impresses with a space-saving design that provides you with more than enough room for high-end components. Thanks to effective cooling and neat cable management, this case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact Size: Space-saving case for high-end hardware Effective Cooling: Room for up to nine fans Large Radiator: Installation of a 360 mm radiator at the top is possible Tidy Build: Space for clean cable management Back-Connect Support: Supports motherboards with a back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SF case built for greatness. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360 mm radiator can be fitted at the top if you prefer water cooling. Besides fans and a radiator, the mesh on the front also ensures very good airflow, so less hot air accumulates in your case. Your new gaming PC with clean cable management Laying cables neatly isn’t easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also allows for better air circulation. Mini-ITX case built for powerful hardware Even a large graphics card is no problem—the case offers space for a GPU up to 430 mm in length. Note that if you use the maximum length, you cannot install fans at the front. The CPU cooler should not exceed a height of 175 mm, and the power supply should be no longer than 150 mm.
Tootekood: D32 PRO MESH WHITEGTIN: 6970620554358Korpused
With the D32 series, Jonsbo targets anyone wanting to build their PC in a space-saving manner. Unlike the D32 STD, the D32 PRO PC case offers special and practical features like Back-Connect or improved front I/O, making it aimed at the high-end segment. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for Back-Connect motherboards Mesh side panel for a subtle appearance Plenty of space for cooling solutions, allowing for high-performance hardware installation Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Mesh: Space-saving and subtle case for high-end hardware Whether midrange HTPC or high-end PC – the D32 PRO Mesh from Jonsbo comfortably fits a variety of build types. This minimal case accommodates graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In Back-Connect mode, the maximum CPU cooler height is reduced by just under seven millimeters. This means that even with the compact design of the case, adequate cooling for your hardware is ensured. Combined with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the case provides enormous airflow inside. No cable clutter with Back-Connect With Back-Connect motherboards, such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case in B-mode with around six to seven millimeters additional space is almost completely free of visible cable clutter. Because most power and connection cables can be routed to the back of the motherboard, cable management is no longer necessary, and you still get a clean look inside your case. Powerful cooling in a compact space So your high-performance hardware stays adequately cooled in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware will remain cool even under load. Three dust filters on the front, top, and bottom ensure your hardware stays free from dust and dirt. As a result, your temperatures will always be at optimal levels, and the lifespan of your hardware will be extended.
Tootekood: D31 STD BLACK SCGTIN: 6970620552491Korpused
Elegantes und vielseitiges mATX-Gehäuse, geschlossene Front für Silent-Builds, mit integriertem 8-Zoll-Display, Seitenteil aus Temperglas, bis zu 8 Lüfter und 3 Radiatoren möglich, für GPUs mit max. 400 mm Länge, versetzbares Netzteil für optimale Raumaufteilung
The Jonsbo D31 MESH mATX case is a sleek and versatile option for building a powerful computer. Its front mesh design allows for optimal airflow and its tempered glass side panel adds a touch of elegance. The case can accommodate up to 8 fans and 3 radiators, and can fit GPUs up to 400mm in length. The versatile layout allows for a customizable and optimized use of space.
