Showcase your hardware perfectly with the Phanteks Evolv S2 PC case. The spacious panoramic design with glass front and sides always gives you a clear view of your components—ideal for eye-catching builds with RGB lighting and custom water cooling. Black midi-tower with panoramic design Efficient cooling options with up to seven fans and radiator support up to 360 mm Supports motherboards up to E-ATX size with back-connect design Space for graphics cards up to 395 mm and CPU coolers up to 175 mm in height Clean look thanks to hidden cabling Four integrated RGB fans Phanteks Evolv S2: Midi-tower with panoramic design The Phanteks Evolv S2 midi-tower offers the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it’s the ideal choice for gaming and workstation builds. Optimal cooling with fans and radiators To keep your hardware cool under any load, the Phanteks Evolv S2 can accommodate up to seven fans. The top and bottom each support the installation of three 120 mm fans, while the rear can hold a 120 mm fan. To get you started, four 120 mm fans are already pre-installed—three at the bottom and one at the rear. If you prefer water cooling—whether AiO or custom—you can also install a radiator. The top supports a radiator up to 360 mm in size. Installing your hardware The case supports the installation of graphics cards up to 395 mm in length. Motherboards up to E-ATX format are supported. The new back-connect design motherboards are also compatible, allowing for clean cable management and an upgraded setup. The CPU cooler should not exceed 175 mm in height. Up to four drives can be installed to store your programs and games.
XPG BATTLECRUISER II ST. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Frontventiler installeret: 3x 120 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 506 mm, Højde: 550 mm. Pakkebredde: 339 mm, Pakkedybde: 643 mm, Pakkehøjde: 615 mm
The chassis stand for the Tower 300 Peach Fuzz includes a base cover and a display stand. It allows users to position their Tower 300 Peach Fuzz horizontally, making it easy to customize the case and create a unique experience. The base plate also features a filter to protect against dust. The chassis stand comes with rubber pads that prevent scratches on the chassis during installation. The abrasion-resistant material provides lasting protection without affecting the surface of the tower. The small elevations of the anti-slip design are strategically placed to ensure a secure grip and prevent unwanted sliding during use.
The chassis stand for the Tower 300 Matcha Plum includes a base cover and a display stand. It allows users to position their Tower 300 Matcha Plum horizontally, making it easy to customize the case and create a unique experience. A dust filter is attached to the base plate to provide protection against dust. The chassis stand comes with rubber pads to prevent scratching the chassis during installation. The abrasion-resistant material ensures lasting protection without affecting the surface of the tower. The small elevations of the anti-slip design are strategically placed to provide a secure hold and prevent unwanted movement during use.
Wall-mountable showcase case, ATX form factor, designed for custom water cooling, vertical GPU mounting, up to 360 mm radiator, graphics cards up to 400 mm in length.
DarkFlash HM1 computer caseDarkFlash HM1 is a midi tower computer case that supports ATX, M-ATX and ITX format motherboards, while offering up to seven 120 mm fan slots and the ability to mount up to 360 mm of water cooling on top of the case. The internal space allows for the installation of graphics cards up to 380 mm in length and CPU coolers up to 175 mm in height. A side panel of curved tempered glass with anti-reflective coating provides a clear view of components, while the modular design and hidden cable routing system facilitate neat installation. The front features high-speed USB 3.0 and USB-C connectors, which translates into convenient support for external devices.Efficient ventilation and support for water coolingThe HM1 chassis supports the installation of up to seven 120mm fans, which translates into efficient cooling even under heavy load. Three fans each can be mounted at the front and bottom, and one (120 or 140 mm) at the rear. The top panel supports water cooling up to 360 mm. This configuration keeps the temperature inside the case stable and minimizes noise.Thoughtful component layoutThe HM1 has been designed to ensure maximum compatibility and easy installation of components. It supports ATX, M-ATX and ITX format motherboards. Inside, space is provided for three HDDs, mounted in the bottom compartment. The motherboard is installed at the rear, allowing for more orderly cable routing and better airflow.Built-in portsOn the front panel, the user has two USB 3.0 ports, a USB-C connector, two audio connectors and a power button. Such a setup makes it easy to quickly connect external devices and operate the hardware.Refined designThe case features a one-piece curved tempered glass panel with high transparency. As a result, the computer's interior remains clearly visible - the manufacturer used nano-AR coating, which reduces reflections to just 3%. The magnetic top panel can be easily removed, making it easy to install fans and clean the case. Modular cable design and a hidden tool compartment make assembling the computer not only convenient, but also aesthetically pleasing. ManufacturerDarkflashModelHM1Housing typeMidi TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXSlots for internal drives3 × HDDExpansion card slots7 × PCIeMax graphics card length380 mmMax CPU cooling height175 mmMax number of fans7 × 120 mmFan mounting optionsTop: 3 × 120 mmRear: 1 × 120 mm or 1 × 140 mmBottom: 3 × 120 mmWater cooling mounting optionsTop: up to 360 mmNumber of fans installedno fans installedType of fansPWM 120 mmButtons and controlsPower buttonConnectors: 2 × USB 3.0; 1 × USB-C; 2 × Audio (headphones and microphone)ColorBlack and whiteHeight450 mmWidth240 mmDepth430 mmWeightapprox. 7.8 kg
Darkflash M305 Mesh fanless computer case (Black)Darkflash M305 Mesh is a compact M-ATX case that combines futuristic design with practical solutions. It offers a mesh front for better airflow, a tempered glass panel for easy access and presentation of components, the ability to mount as many as 7 fans, support for high-performance graphics cards and CPU (Central Processing Unit, processor) cooling, and a functional I/O panel with a USB 3.0 port (Universal Serial Bus, an interface used for powering and charging devices, as well as for data transfer). Thanks to its well-thought-out design and ample interior space, this model will be perfect for both modern gaming setups and PCs for everyday use.Design and functionalityDarkflash M305 Mesh is an option for those who appreciate minimalist design, functionality and freedom in computer configuration. The front of the case has been made in an industrial style, with a full mesh panel, which first of all provides excellent airflow into the case, but also looks stylish. This solution is especially important for more demanding sets, where proper cooling directly affects the stability of hardware operation.Efficient ventilation and free coolingAlthough the M305 Mesh does not include pre-installed fans, its design has been prepared so that the user can independently select and install up to seven 120mm fans. Such flexibility gives you the opportunity to customize your cooling system - from a basic layout for an office PC to an elaborate gaming setup with advanced cooling. The mesh front not only improves air circulation, but also reduces heat buildup of components even under intense load.Tempered glass for more styleA screw-mounted tempered glass side panel allows you to quickly access the computer's interior without the need for tools. This is especially convenient for frequent kit modifications. At the same time, the transparent panel is great for backlit components, allowing you to expose the computer's interior and create an aesthetically pleasing whole.Compact size that does not limit the possibilitiesThe case supports M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than the standard ATX) and ITX (Information Technology eXtended, a very compact motherboard format) motherboards. Despite its small size (325 × 195 × 387 mm), its interior has been designed for maximum functionality. Inside there will be room for a CPU cooler up to 160 mm high and a graphics card up to 300 mm long. This allows it to accommodate most popular components without worrying about compatibility. The chassis also has room for two SSDs (Solid State Drive, a solid state drive) and two traditional HDDs (Hard Disk Drive, a classic hard drive), giving you plenty of room for storage expansion.Functional I/O panel and modern connectorsThe top of the chassis features a well-placed I/O panel with easy access to the most important ports. The presence of a USB 3.0 connector guarantees fast data transfer and convenient connection of external devices such as flash drives, portable drives or other accessories. The clear layout of the top panel simply makes it more convenient to use the computer on a daily basis.Includedmotherboard screws x12hard drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelM305 MeshHousing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPSU standardM-ATX, bottom of caseSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots4Max PSU length160 mmMax length of graphics card300 mmMax height of CPU cooler160 mmMax number of fans7Fan mounting optionsSide: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1; Top: 120 mm x2.Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.45 mm SPCCColorWhiteHeight387 mmWidth195 mmDepth325 mm
Darkflash M305 Mesh fanless computer case (White)Darkflash M305 Mesh is a compact M-ATX case that combines futuristic design with practical solutions. It offers a mesh front for better airflow, a tempered glass panel for easy access and presentation of components, the ability to mount as many as 7 fans, support for high-performance graphics cards and CPU (Central Processing Unit, processor) cooling, and a functional I/O panel with a USB 3.0 port (Universal Serial Bus, an interface used for powering and charging devices, as well as for data transfer). Thanks to its well-thought-out design and ample interior space, this model will be perfect for both modern gaming setups and PCs for everyday use.Design and functionalityDarkflash M305 Mesh is an option for those who appreciate minimalist design, functionality and freedom in computer configuration. The front of the case has been made in an industrial style, with a full mesh panel, which first of all provides excellent airflow into the case, but also looks stylish. This solution is especially important for more demanding sets, where proper cooling directly affects the stability of hardware operation.Efficient ventilation and free coolingAlthough the M305 Mesh does not include pre-installed fans, its design has been prepared so that the user can independently select and install up to seven 120mm fans. Such flexibility gives you the opportunity to customize your cooling system - from a basic layout for an office PC to an elaborate gaming setup with advanced cooling. The mesh front not only improves air circulation, but also reduces heat buildup of components even under intense load.Tempered glass for more styleA screw-mounted tempered glass side panel allows you to quickly access the computer's interior without the need for tools. This is especially convenient for frequent kit modifications. At the same time, the transparent panel is great for backlit components, allowing you to expose the computer's interior and create an aesthetically pleasing whole.Compact size that does not limit the possibilitiesThe case supports M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than the standard ATX) and ITX (Information Technology eXtended, a very compact motherboard format) motherboards. Despite its small size (325 × 195 × 387 mm), its interior has been designed for maximum functionality. Inside there will be room for a CPU cooler up to 160 mm high and a graphics card up to 300 mm long. This allows it to accommodate most popular components without worrying about compatibility. The chassis also has room for two SSDs (Solid State Drive, a solid state drive) and two traditional HDDs (Hard Disk Drive, a classic hard drive), giving you plenty of room for storage expansion.Functional I/O panel and modern connectorsThe top of the chassis features a well-placed I/O panel with easy access to the most important ports. The presence of a USB 3.0 connector guarantees fast data transfer and convenient connection of external devices such as flash drives, portable drives or other accessories. The clear layout of the top panel simply makes it more convenient to use the computer on a daily basis.Includedmotherboard screws x12hard drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelM305 MeshHousing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPSU standardM-ATX, bottom of caseSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots4Max PSU length160 mmMax length of graphics card300 mmMax height of CPU cooler160 mmMax number of fans7Fan mounting optionsSide: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1; Top: 120 mm x2.Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.45 mm SPCCColorWhiteHeight387 mmWidth195 mmDepth325 mm
The View 380 XL WS ARGB Mid-Tower Case is designed for next-generation motherboards and features a specialized design that supports both standard motherboards and motherboards with hidden connectors from ASUS, MSI, and GIGABYTE. The dual-chamber layout provides more building space, improved cable management, and increased airflow for greater flexibility. The View 380 XL WS ARGB Mid-Tower Case offers enhanced visibility with tempered glass on the front and left side, allowing users to showcase their system. For optimal cooling, users can install a 360mm radiator at the top and on the motherboard side. The case includes three 120mm ARGB-Lite reverse fans with hydraulic bearings on the motherboard side and one 120mm ARGB-Lite fan with a hydraulic bearing at the rear. The stunning lighting effects can be controlled via motherboard software from ASUS, GIGABYTE, MSI, and ASRock. The integrated GPU bracket prevents graphics card sag and provides additional support. The View 380 XL WS ARGB Mid-Tower Case offers excellent expansion options. It supports a CPU cooler with a maximum height of 160mm, GPU installation up to 420mm in length, and a power supply up to 180mm in length. The case is optimized for superior cooling performance and comes with four 120mm ARGB-Lite fans with hydraulic bearings, and supports up to ten 120mm fans in total. For storage compatibility, the View 380 XL WS ARGB Mid-Tower Case supports up to three 2.5-inch SSDs or one 3.5-inch HDD. The lower I/O ports include two USB 3.0 ports, one USB 3.2 Gen 2 Type-C port, and one HD audio jack, providing convenient access when the PC case is on a desk.
DarkFlash DS900G computer case (black)DarkFlash DS900G is a Middle Tower chassis that offers extensive functionality for demanding users. It supports ATX, Micro-ATX and ITX format motherboards, and its interior accommodates graphics cards up to 425 mm in length and CPU coolers up to 170 mm in height. The interior space is designed for easy access to components and convenient expansion. The DS900G also offers full support for various cooling systems, so it can easily handle demanding gaming or work setups.Full interior displayThe curved side panel made of transparent tempered glass allows a full view of the components installed inside. The slightly rounded surface of the glass creates a panoramic effect that sets the case apart from standard models and allows the backlighting and mounting aesthetics to be fully exposed.Effective coolingThe case is designed for optimal air circulation. It allows the installation of up to 10 120 mm fans or their combination with 2 140 mm fans on the top panel. The design provides for 3 fans on the top, 3 on the side, 1 on the back and 3 on the bottom, allowing for a very efficient cooling system. In addition, up to 360 mm of water cooling can be installed on the top panel, and up to 240 mm on the side.Optimized airflow and noise reductionThe DS900G chassis features densely spaced vents that not only improve airflow, but also effectively trap larger dust particles. The rear panel is equipped with a steel mesh that improves cooling efficiency by up to 15% while reducing noise levels by about 10%.Magnetic dust filtersThere are magnetically attached dust filters on the top and bottom of the case. As a result, they can be easily removed and cleaned without removing other components. This type of solution simplifies the daily maintenance of the computer and helps maintain optimal operating conditions for components.Various expansion possibilitiesThe interior of the chassis was designed for users who want to keep the chassis aesthetically pleasing and tidy, while still having room for all the components they need. The DS900G offers 7 PCIe slots, which gives you the freedom to mount long graphics cards and additional expansion cards. The mounting space has been planned to ensure adequate airflow, room for cable routing and the ability to quickly access critical components.Flexible disk mounting optionsDarkFlash DS900G allows the installation of 2 HDDs in 3.5" format and 2 SSDs in 2.5" format. Depending on the user's needs, various configurations are possible, such as two HDDs and one SSD or one HDD and two SSDs. This allows each user to tailor the storage layout to their own preferences and the specifics of the set.Convenient access to ports and buttonsThe case offers a practical set of ports and buttons on the front panel. The user has one USB 3.0 and two USB 2.0 ports, as well as an HD Audio connector. The front also features Power, Reset and backlight control buttons. ManufacturerDarkFlashModelDS900GHousing typeMiddle TowerSide panelTempered glassMotherboard standardATX, Micro-ATX, ITXPower supply standardATXSlots for internal drives2 × 3.5" (HDD)2 × 2.5" (SSD)Expansion card slots7 PCIe slotsMax graphics card length425 mmMax CPU cooling height170 mmMax number of fansUp to 10 120 mm fansIn addition: 2 140 mm fans (top)Fan mounting optionsTop: 3 × 120 mm or 2 × 140 mmSide: 3 × 120 mmRear: 1 × 120 mmBottom: 3 × 120 mmWater cooling mounting optionsTop: up to 360 mm or 240 mmSide: up to 240 mmNumber of fans installedNo fans installedButtons and controlsPower, ResetConnectors1 × USB 3.02 × USB 2.01 × HD AudioMaterialSPCC 0.5 mmColorBlackHeight454 mmWidth218 mmDepth434 mm
With the TRYX FLOVA F50, you can build your perfect gaming PC. The midi-tower combines a sleek, modern design with thoughtful airflow. Whether you're creating a gaming PC, a creator workstation, or a powerful all-rounder, the FLOVA F50 provides the ideal foundation. Quiet operation: Optimized cooling system ensures low noise levels Outstanding airflow: Special cross-flow fan concept for excellent cooling Ample space for hardware: Graphics cards up to 420 mm in length Radiator support: Up to 360 mm space for AiO water cooling Well-equipped I/O panel: USB-C 3.2 on the side TRYX FLOVA F50: Midi-tower with stylish design TRYX FLOVA F50 Pink front view The FLOVA F50 has a clean and understated look. The front and side elements feature a fabric finish, giving it a cozy and minimalist appearance while ensuring plenty of fresh air inside. This case fits seamlessly into your gaming room, office, or living room. Powerful airflow with clever air circulation TRYX FLOVA F50 interior with fans Inside, the TRYX Cross-Flow System (TCF) provides a strong supply of fresh air. The fans direct air at a 90-degree angle through the case, efficiently cooling your graphics card and CPU. At the same time, your gaming system stays pleasantly quiet—around 20 dB(A) at 1,100 rpm. This means you get strong cooling without having your PC constantly audible during every task. Plenty of space for modern high-end hardware You can install even large components in the FLOVA F50. Graphics cards up to 420 mm long fit easily. Air coolers can be up to 170 mm high. For water cooling, the FLOVA F50 supports radiators up to 360 mm. Ready for current motherboard generations Supports ATX motherboards Compatible with back-connect designs (BTF / Project Zero) Clean cable management Tool-free assembly in many areas Especially with motherboards featuring rear connectors, you benefit from a particularly tidy interior. Cables disappear from view, giving your build a much cleaner look. I/O panel with USB-C On the side, you'll find an I/O panel with USB-C 3.2, allowing you to easily connect fast external devices without having to reach to the back of your case. It's easily accessible and matches the sleek overall concept of the case. Ideal for gaming, creative work, and quiet setups TRYX FLOVA F50 Pink in a setup Whether you’re planning a quiet creator PC or a powerful gaming machine, the TRYX FLOVA F50 gives you a case that reliably dissipates your components’ heat without being overly loud. It’s the perfect choice if you value quiet operation, strong airflow, and a subtle yet high-quality design. It doesn’t seek attention but impresses with its thoughtful details.
The Jonsbo X400 Pro is the premium variant of the X400 series and is aimed at enthusiasts who value excellent material quality. In contrast to the base version, the outer frame is made of real aluminum – for maximum stability, a premium feel, and a durable finish. Aluminum frame for an elegant appearance and high torsional rigidity 13 fan mounts – extreme cooling capacity for high-end builds Support for 360 mm radiators on the top and side Spacious interior for GPUs up to 427 mm and CPU coolers up to 176 mm USB-C (Gen 2), 2x USB-A, and audio/mic on the front I/O Case with a premium character The Pro version of the X400 uses an aluminum frame instead of plastic like the standard model. This not only ensures a more elegant appearance, but also greater robustness and better heat dissipation – ideal for demanding setups. Maximum air and water cooling Up to 13 fans can be installed in the case – three on the top, three on the side, two at the rear, two on the back side, and three on the bottom. In addition, two 360 mm radiators can be installed simultaneously – optimal for push/pull or dual-AiO systems. Compatible, spacious, and future-proof Whether classic or back-connect motherboards: the X400 Pro supports all common form factors and offers enough space for high-end graphics cards, power supplies up to 180 mm, and modern cooling concepts – all packaged in a high-quality aluminum chassis.
Tootekood: B275 PRO BLK +6FGTIN: 4711527008344Korpused
DarkFlash B275 PRO computer case (black) + 6 fansDarkFlash B275 PRO is a functional computer case that draws attention to its interior at first glance. The cornerless design provides a full 270° view of the components, and the six fans included in the set provide a ready-to-use and efficient cooling system as standard. While maintaining compact dimensions (354 x 275 x 425 mm), this model offers space for graphics cards up to 410 mm in length, CPU cooling up to 160 mm in height, and two SSDs or one HDD. So you can easily create exactly the configuration you want!Take care of the design of your equipment – 270° panoramic designThe case is equipped with glass panels that provide a panoramic view of the interior. The lack of a vertical corner profile eliminates visual divisions, making all components clearly visible from the front and side. This solution works particularly well in gaming and streaming sets, among others – it allows you to showcase water cooling with a display or illuminated RGB fans in an interesting way.Solid construction and modular designThe body of the case is made of 0.5 mm thick SPCC steel, which ensures adequate rigidity and stability of the entire structure. The B275 PRO model also stands out for its modular design, which facilitates the installation of components, providing convenient access to the interior when assembling or upgrading the set. In addition, there are dust filters at the top and bottom that reduce the amount of dust entering the computer and help keep the components in good condition.Efficient cooling and heat dissipation systemThe DarkFlash B275 PRO allows for the installation of up to nine 120 mm fans or 240/280/360 mm water cooling. In addition, the case offers numerous ventilation openings. This layout promotes efficient airflow throughout the interior, which translates into effective heat dissipation from the most important components.Configuration for special tasksThe interior of the case has been designed with modern components in mind. The DarkFlash B275 PRO allows for the installation of graphics cards up to 410 mm in length and CPU coolers up to 160 mm in height, giving you a lot of freedom in choosing components. You also have five expansion card slots and space for an HDD or two SSDs. So you can ensure you have enough space for your files.Connectors on the top panelOn the top panel of the case, you will find a USB-A 3.0 port, two USB-A 2.0 ports, and an HD audio connector. The whole thing is complemented by power and reset buttons. All this provides convenient access to the most important functions of the computer – you can freely connect peripherals, transfer files, use headphones, charge devices, and more. ManufacturerDarkFlashModelB275 PROCase typeMini towerSide panelTempered glassMotherboard standardM-ATX / ITXPower supply standardATXInternal drive bays3.5" HDD x1 / 2.5" SSD x2Expansion card slots5Max power supply length230 mmMax graphics card length410 mmMax CPU cooler height160 mmMax number of fans9Fan mounting optionsTop: 120 mm x3 / 140 mm x2Side: 120 mm x2Rear: 120 mm x1Bottom: 120 mm x3Water cooling mounting optionsTop: 240 / 280 / 360 mmSide: 240 mmBottom: 240 / 360 mmNumber of installed fans6Fan type120 mmButtons and controlsPower, ResetConnectorsUSB-A 3.0 x1, USB-A 2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight354 mmWidth275 mmDepth425 mmWeightApprox. 4.7 kg
Schicker Midi-Tower in Schwarz, mit luftdurchlässiger Mesh-Front, Seitenteil aus Tempered Glass, Platz für 2x 280-mm-Radiator, max. 360-mm-Radiator, Mainboards bis E-ATX, bis zu 390 mm lange Grafikkarten, inkl. 1x 120-mm-Lüfter
Product kirjeldus: MSI MAG Forge 100M - Torn - ATX Product Type: System cabinet Form Factor: Torn värv: must I/O Ühendusi: 2 x USB 3.2 Gen 1 1 x microphone 1 x kõrvaklapid Supported Motherboards: ATX, microATX, Mini-ITX System Cabinet Features: Supports 240 mm radiator in front panel, toetab 240 mm radiator in top, toetab 120 mm radiator in rear, tempered glass side panel, bottom dust filter, top magnetic dust filter, LED control button Power Device: No toiteplokk Specification Compliance: ATX mõõtmed (WxDxH): 21 cm x 42.1 cm x 49.9 cm kaal: 5.64 kg
Füüsilised andmed: EMAPLAADI TUGI: ATX; Micro-ATX; Mini-ITX GRAAFIKAKAARDI PIKKUS KUNI: 400 mm PROTSESSORI ÕHKJAHUTI KÕRGUS KUNI: 165 mm TOITEPLOKI ÜHILDUVUS: ATX PS2; 200 mm KÕRGUS: 427 LAIUS: 280 SÜGAVUS: 440 mm Ühenduvus: I/O PANEEL: 1x USB 2.0 (internal connection); 2x USB 3.0 (internal connection); HD Audio; Reset switch Kettasahtlid 2.5": 4x 2.5" pesa 3.5": 2 Ventilaatoritugi: TAHA PAIGALDATUD 1 x 120mm Umbra Void ARGB PWM ÜLESSE VÕIMALIK PAIGALDADA 3x 120 TAHA VÕIMALIK PAIGALDADA 1x 120
The NZXT H7 enclosures are adaptable, easy to build and have plenty of room for components. Perforated top and front panels improve air circulation and the front and side panels open without tools. Intuitive cable management ...
Stylischer Midi-Tower in Schwarz, perforierte Front für guten Airflow, Seitenteil aus Tempered Glass, mit Netzteilabdeckung, inkl. 3x 140-mm-FRGB-Lüfter, Grafikkarten bis 348 mm, CPU-Kühler bis 180 mm
