The Phanteks NV9 MK2 is perfect for enthusiasts who want to showcase their hardware spectacularly while ensuring strong cooling performance. With its generous use of Tempered Glass and subtle DRGB lighting, you can impressively highlight your components, while the thoughtful ventilation system ensures optimal airflow. Ideal for you if you value aesthetics, functionality, and compatibility with back-connect motherboards. Elegant showcase case with excellent cooling performance Side and front panels made of Tempered Glass for a panoramic view of your hardware Optimal cooling with space for up to 11x 140mm or 12x 120mm fans Radiators possible on the top, bottom, side, and back Space for graphics cards up to 490mm in length Supports large motherboards up to E-ATX Back Connect: compatible with ASUS BTF and MSI Project Zero Space for large CPU tower coolers up to 205mm in height Integrated D-RGB lighting with built-in controller Phanteks NV9 MK2 Big Tower: Panoramic view now with Back Connect With the Phanteks NV9 MK2, you don’t compromise on cooling and presentation for your hardware. The left side panel and seamlessly integrated front are made of Tempered Glass and provide a superb panoramic view of your components. The pre-installed but subtle DRGB lighting enhances the look of the case and further highlights your hardware. Strong cooling performance for your components In developing the NV series and particularly the NV9 MK2, PHANTEKS focused on cooling the components from the start. The case is therefore designed to be very open and aimed at uninterrupted airflow. The top and part of the right side cover are made of mesh, ensuring good air throughput. The bottom is sloped and provides ample space with a maximum distance of 65mm to guide fresh air into the case. Many mounting options for better cooling The PHANTEKS NV9 MK2 offers numerous options for fan installation to optimally cool your hardware. You can accommodate a total of eleven 140mm or twelve 120mm fans, ensuring effective cooling throughout. Three fans can be mounted at the bottom on a removable frame above the dust filter. The side of the case offers space for four 120mm or three 140mm fans on another removable frame. Three fans can be installed on the top, and the back even has space for two additional fans. There is also sufficient space for extensive water cooling. On the top and bottom as well as on the side, one 420mm radiator can fit simultaneously. You can alternatively install a 360mm radiator at the bottom or the top. Additionally, a heat exchanger up to 480mm in length can fit on the side. You can also install a 240mm or 280mm radiator at the back if you want to use a smaller AiO water cooling for your GPU. Ample space for your gaming hardware If you use a large motherboard to get the most out of your system, then the NV9 MK2 is also the right choice for you. For maximum compatibility, you can easily accommodate E-ATX motherboards. Additionally, graphics cards up to 490mm in length and 205mm in width can be installed. There is sufficient space for modern, wider GPUs and 12VHPWR cables in this big tower case. For additional stability, a GPU holder is also included. The PHANTEKS NV9 MK2 also supports CPU coolers up to 205mm in height. The case also provides space for up to three 3.5-inch and two 2.5-inch drives or six 2.5-inch drives, giving you ample storage options for any data. These can be installed on a hinged frame behind the motherboard tray and directly on the back of the motherboard tray. Robust construction and well-equipped I/O panel In addition to the Tempered Glass panels, the case impresses with its construction from robust steel. The frame is well hidden by screen prints on the panels. The seamless glass panels not only provide an elegant look but also an unobstructed view of the installed components. The I/O panel features a power button, HD audio and microphone jack, as well as a USB 3.1 Type-C port and two USB 3.0 Type-A ports for fast data transfer. Additionally, there are four buttons integrated into the case for controlling the D-RGB lighting - one button for each mode, colour, speed, and channel. Each channel has two connectors where the LED strips can be attached. The modular I/O panel at the bottom front can also be mounted at the back of the case. Intelligent cable management The PHANTEKS NV9 MK2 features a sophisticated cable management system that ensures a tidy and neat appearance. Particularly notable is the back, which also has a mesh cover and offers cable channels behind it, allowing you to hide cables from the motherboard panel as well. Through a cutout with a rubber grommet, you can even route cables through the bottom of the case. This way, your NV9 MK2 has a neat and appealing look from every angle. The case also supports motherboards with Back Connect. With back-connect design motherboards like MSI's Project Zero or ASUS's BTF motherboards, the connections for power supply, data cables, and other connections are located at the back of the motherboard. This not only provides cleaner cable management in your case but also better ventilation.Specification:ColourPrimary Colour: BlackDimensionsLength / Depth: 575 mmWidth: 280 mmHeight: 615 mmCaseCase Type: Full TowerMotherboard SupportCompatible Motherboard Formats: ATX, E-ATX, Micro-ATX, Mini-ITXMax. Motherboard Format: E-ATXInternal DimensionsMax. CPU Cooler Height: 205 mmMax. GPU Length: 490 mmMax. PSU Length / Depth: 210 mmPower SupplyPSU Format: ATXPower Supply Position: rear topFan Support120 mm fan: 12140 mm fan: 11Drive Bay2.5 inch internal drive bay: 63.5 inch internal drive bay: 3External PortsUSB 3.1 (extreme) Type C: 1USB 3.0 (extreme) Type A: 2Audio output & input: 1x output/input comb. (3.5 mm jack, 4-pin, TRRS)Case FeaturesI/O Position: FrontSide Panel: with windowFilters included: YesBook ConnectBook Connect: YesBook-Connect Compatibility: ASUS BTF, MSI Project ZeroExpansion SlotsExpansion slots / PCI slots: 8MaterialMaterial: Plastic, Steel, Tempered GlassLightingLighting: YesRGB Type: ARGB / DRGBLighting Colour: RGBAdditional ContentsIncluded Fan: None
Black case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Room for graphics cards up to 460 mm and CPUs up to 170 mm in height Installation of up to nine SSDs enables extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that convinces not only with its wide range of hardware possibilities, but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to receive true admiration. With the LUCA L70, you’re perfectly equipped to assemble your gaming PC exactly as you wish. This midi-tower offers more than enough space to keep your hardware cool, and is also extremely easy to take apart and put back together. Building your high-end setup has never been so easy! Comprehensive cooling options for your new build When building your own PC, cooling is one of the most important factors to consider. The LUCA L70 allows the installation of up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that with this combination, the power supply unit must be mounted on the top of the case. If you prefer mounting the PSU on the bottom, three fans can be installed on the top and only one on the bottom. Water cooling enthusiasts will also not be disappointed: radiators up to 420 mm can be installed in several locations. If the power supply is on the top, only a 240 mm radiator is possible there and a maximum 360 mm radiator on the bottom. If you mount the PSU at the bottom, there is room for a 420 mm radiator on the top as well as on the side. To prevent unnecessary dust buildup inside the case, there are dust filters on the top and bottom. This ensures a much longer lifespan for your hardware and saves you time and annoying cleaning. Thanks to the many options for installing fans and radiators, effective cooling is ensured so your high-end hardware always performs at its peak. In addition, the tower stands 4 mm above the ground on X-shaped legs, which further improves airflow. Case for powerful hardware So you can play even the most demanding games smoothly at high settings, the LUCA L70 accommodates a high-performance graphics card up to 460 mm in length. An included GPU bracket ensures it’s not subject to gravity. Vertical GPU installation is also possible—appropriate accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX with a width of up to 280 mm. To avoid cable clutter, it also supports motherboards with back-facing connectors when the PSU is on top, but only in ATX or micro-ATX format. The CPU height must not exceed 170 mm, and the power supply should be no longer than 190 mm. For plenty of storage for your programs and games, you can attach up to nine 2.5-inch drives to the side of the LUCA L70. Tool-free assembly and disassembly To make installing and swapping hardware as easy as possible, the LUCA L70 is fully modular. The front, side, and other parts can be taken apart and reassembled without any additional tools, plus the motherboard tray can be moved so you can install the motherboard, CPU, and CPU cooler independently.
White case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Space for graphics cards up to 460 mm and CPUs with a height of up to 170 mm Installation of up to nine SSDs provides extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that impresses not only with its variety of hardware possibilities but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to earn true admiration. With the LUCA L70, you are perfectly equipped to build your gaming PC exactly the way you want. This midi-tower not only offers you more than enough space to cool your hardware, but it can also be easily disassembled and reassembled. Building your high-end system has never been so easy! Comprehensive cooling options for your new build When you assemble your own PC, cooling is one of the most important points to consider. The LUCA L70 allows you to install up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that in this configuration, the power supply must be mounted on the top of the case. If you prefer to mount the PSU at the bottom, three fans can be installed on the top, and only one on the bottom. Water cooling enthusiasts won't be disappointed either: radiators up to 420 mm can be installed in several places. If the PSU is mounted on the top, you can fit a radiator up to 240 mm there and up to 360 mm at the bottom. If the PSU is mounted at the bottom, there is room for a 420 mm radiator on both the top and the side. To prevent dust from accumulating unnecessarily inside the case, there are dust filters on the top and the bottom. This ensures significantly longer hardware lifespan and saves you time and annoying cleaning. Thanks to the numerous options for installing fans and radiators, efficient cooling is guaranteed, ensuring your high-end hardware always operates at peak performance. Additionally, the tower stands 4 mm off the ground on X-shaped legs, further improving airflow. Case for powerful hardware To ensure even the most demanding games run smoothly on high settings, the LUCA L70 supports powerful graphics cards up to 460 mm in length. An included GPU bracket ensures the card doesn't suffer due to gravity. Vertical installation of the graphics card is also possible, but the necessary accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX and up to 280 mm wide. To avoid messy cabling, motherboards with rear connectors are also supported when the PSU is in the top position, but only in ATX or Micro-ATX format. The CPU height should not exceed 170 mm, while the power supply should be a maximum of 190 mm long. To ensure enough storage for your programs and games, up to nine 2.5-inch drives can be mounted on the side in the LUCA L70. Toolless assembly and disassembly To make installing and swapping your hardware as easy as possible, the LUCA L70 is designed to be completely modular. The front, side, and other parts can be removed and reassembled without additional tools. The motherboard tray can also be repositioned, allowing you to install the motherboard, CPU, and CPU cooler independently of each other.
Effective M.2 cooler for M.2 SSDs in 2280 format, prevents thermal throttling, compatible with single/double-sided M.2 2280 SSDs, four 4-mm copper heatpipes
