The Lian Li DAN Cases A3-mATX Wood Edition in black combines modern design with an elegant walnut wood front panel. Thanks to excellent airflow through mesh panels, flexible configuration options, and space for high-end hardware, this case is the ideal choice for those seeking performance and style in a compact format. Perfect for demanding builds with a personal touch! Micro-ATX case by Lian Li in collaboration with DAN Cases Elegant front cover made from premium walnut wood and side panel of tempered glass Mesh panel on the top for excellent airflow Flexibly customizable: Let your imagination run wild Outstanding cooling thanks to space for 360 mm radiators Suitable for motherboards in Micro-ATX or Mini-ITX form factors Supports various power supplies from SFX to ATX A touch of luxury: The Lian Li DAN Cases A3-mATX Wood Edition in black If you're looking for a small form factor case for high-performance PC hardware, you should take a closer look at the Lian Li DAN Cases A3-mATX Wood Edition. This case combines a minimalist design with premium features: the elegant walnut wood front gives your setup an exclusive touch. With a capacity of about 26 liters, this Micro-ATX case is compact and space-saving. At the same time, the A3-mATX Wood Edition is perfect for high-end PC components, offering effective cooling despite its small size. With plenty of room for fans and radiators and generous ventilation openings, this mini tower easily meets the demands of powerful hardware. Flexibility meets performance: The fan and cooling options of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX Wood Edition offers space for up to 10 fans in the 120 mm format. These can be distributed as follows: three on the top, three on the side, three on the bottom, and one on the rear. Alternatively, two 140 mm fans can be mounted on both the top and side. With 25 mm thick fans on the case bottom, the GPU’s height is limited to 61 mm (3 slots). CPU air coolers can be up to 165 mm tall. Lian Li and Daniel Hansen also considered water cooling when developing the A3-mATX: A radiator can be installed in three locations inside the case: either a 360 mm (triple radiator) or 280 mm (dual radiator) on the top or the side. You must choose one of these two positions. The bottom of the case accommodates an additional 240 mm radiator. If you mount the fans below the radiator, you can even install a 360 mm radiator. Customizable configuration: The versatile possibilities of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX is suitable for a motherboard in Micro-ATX or Mini-ITX form factor. Unlike a Mini-ITX case, the PC case offers four expansion slots, allowing you to install a graphics card up to 4 slots tall and up to 415 mm long. You can install two 2.5-inch SSDs on a bracket. You can also install a 3.5-inch HDD or another 2.5-inch drive at the bottom of the case. You have the choice between an ATX, SFX-L, or SFX power supply, which you can mount flexibly at the front or side to create more space for your graphics card or the radiator—just as you prefer. In general, the smaller the power supply in the A3-mATX, the more room you have for the rest of your hardware. The I/O panel on the front of the Lian Li DAN Cases A3-mATX Wood Edition features two USB 3.0 Type A ports, one USB 3.1 Type C port, two 3.5 mm audio jacks (Mic-In/Audio-Out), and a power button. Note: The Lian Li DAN Cases A3-mATX Wood Edition offers numerous configuration options, but space inside this case is limited. The size and position of the power supply are crucial in selecting the right PC components. Therefore, we recommend careful planning using the manual in advance.
The Phanteks XT M3 impresses with a space-saving design that offers you more than enough room for high-end components. With effective cooling and tidy cable management, the case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact size: Space-saving case for high-end hardware Effective cooling: Space for up to nine fans Large radiator: Supports installation of a 360 mm radiator on the top Tidy build: Room for excellent cable management Back-connect support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini-case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SFF case built for big things. Compatible with high-end graphics cards and motherboards supporting back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports the installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360-mm radiator can be fitted on top if you prefer water cooling. Besides fans and a radiator, the mesh front also ensures very good airflow. This helps prevent hot air from accumulating inside your case. Your new gaming PC with clean cable management Managing cables neatly is not easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also improves airflow. Mini-ITX case built for powerful hardware Even a large graphics card fits in effortlessly—the case offers space for a GPU up to 430 mm in length. Note that you cannot install fans at the front if you use the maximum GPU length. The CPU cooler should not exceed a height of 175 mm, and the power supply should not be longer than 150 mm.
ATX-korpus • Esi- ja külgpaneel karastatud klaasist • Kahekordne kambristruktuur • Lihtne kaablite haldamine • Mahutab kuni 445 mm pikkuseid graafikakaarte
White mini tower, supports motherboards up to Micro-ATX, accommodates 3x 2.5- or 3.5-inch drives, CPU cooler up to 145 mm in height, GPU up to 260 mm, 2x 120 mm fans pre-installed at the frontStylish mini case with three sides made of tempered glass Two 120 mm fans pre-installed at the front, with option for an additional fan up to 92 mm at the rear Supports Micro-ATX motherboards and CPU coolers up to 145 mm in height GPUs up to 260 mm in length Supports up to three 2.5- or 3.5-inch drives The Jonsbo V12 in Detail The Jonsbo V12 is a mini case that, despite its compact size, provides ample space for powerful hardware. Tempered glass on three sides gives you a perfect view of your installed components, and a stylish wooden front completes the overall aesthetic. Cooling The mini tower comes pre-installed with two 120 mm fans, ensuring efficient cooling. If needed, an additional fan up to 92 mm can be installed at the rear. Hardware Options The mini tower supports the installation of Micro-ATX size motherboards. The CPU cooler should not exceed 145 mm in height. The graphics card can be up to 260 mm long. For storage, up to three drives can be installed to accommodate programs and games.
USB 3.0 x 2, Mic x1, Spk x1, White, Mini-Tower, Power supply included No Thermaltake Core V1 Side window, USB 3.0 x 2, Mic x1, Spk x1, White, Mini-ITX, CA-1B8-00S6WN-00
Tootekood: SST-TJ04B-E USB 3.0GTIN: 4710713968189Korpused
Introduced in 2004, the TJ04 has been a main stable of SilverStone’s prestigious Temjin series of tower chassis. Its excellent original design needed only a few minor tweaks and improvements over the years to keep up with the demands of modern PC hardware. An important equation in keeping the TJ04 a popular choice among system builders was its understated and classic styling. So in designing the TJ04-E (Evolution), SilverStone engineers kept the exterior styling largely unchanged while vastly improving the internals.The power supply is now bottom-mounted with the ability to accommodate up to four 5.25” drives, nine 3.5” hard drives and six SSDs, raising the bar significantly for storage capacity in a mid tower format. In addition to increased storage capacity, the TJ04-E can also install cards up to 17 inches without the need to remove any hard drive cage, a feat usually accomplished in full towers. To make sure the myriad of component can operate effectively, the TJ04-E includes a custom cooling solution to reduce hard drive temperatures and two custom cables with built-in capacitors to facilitate cable management and improve drive stability.To finish up TJ04-E’s already impressive layout efficiency, design details borrowed from other great SilverStone products such as positive pressure and quick removable filters will enable users to easily maintain consistently high performance for years to come. So it is possible that TJ04-E, like its predecessor, will again be able to outlast many generations of PC builds.- Positive pressure design for effective dust reduction- Support eight expansion slots and extra long graphic cards up to 17 inches- Classically styled 7mm thick aluminum front panel- Quick access and removal for fan filters- Smart backside cable routing design- Motherboard back plate opening for quick CPU cooler assembly- Support up to nine 3.5” hard drives and multiple 2.5” drive slots- Built-in innovative hard drive cooler- Includes two custom SATA cable for improved cable managementFormat AT
Cabinet Form Factor: Midi Torn Mainboard Form Factor13.5-inch Internal Drivesahtleid: 2 2.5-inch Internal Drivesahtleid1Audio Line-Out: 1Lisatarvikud: RGB LED Strip Chassis Features15 mm Nominal kaal: 6.26 kg garantii Term (month)1Box kaal Brutto (kg): 7.59 kg Retail Packaging Netokaal Carton1kg Retail Packaging Netokaal Plastic: 0.05 kg Packs in Box1EAN Code: 4260455641
Extrem kleiner digital adressierbarer RGB-LED-Controller von aqua computer, für bis zu 90 LEDs, inkl. 32 cm RGB-LED-Strips mit 15 LEDs, mit internem USB-Kabel
Umrüstkit für gängige Tower-Gehäuse, bestehend aus einem Riser-Kabel und einer PCI-Slot-Blende, für den vertikalen Einbau der Grafikkarte, nicht kompatibel mit Mini-ITX-Gehäusen
Riesiger Dual-Chamber Big-Tower, Seitenteil und Front aus Tempered Glass, Grafikkarten bis 446 mm, 3x 360-mm-Radiatoren gleichzeitig möglich, Deckel und Seitenwand aus Aluminium, bis zu 10x 120-mm-Lüfter, 1x USB Typ C und 4x USB 3.0 im Frontpanel
Kompaktes Mini-ITX-Gehäuse von Raijintek, aus eloxiertem Aluminium, Silber mit schwarzem Innenraum und Rückseite, Zwei Seitenteile aus Temperglas für tiefe Einblicke, für Mini-ITX-Mainboards und kleiner, 2x 2,5"- & 2x 2,5/3,5"-Slots, GPUs bis 28 cm & CPU-Kühler bis 13,5 cm
EXCEPTIONAL AIRFLOW, SIGNIFICANT QUIET The be quiet! Pure Base 500DX Black is optimized for high cooling performance and designed for those who seek high airflow. High airflow intake front panel and top cover for maximum performance Three Pure Wings 2 140mm fans guarantee high cooling performance and silent operation ARGB LED at the front and inside the case USB 3.1 Type C Gen. 2 for latest hardware Water cooling ready for radiators of up to 360mm Up to two SSDs can be installed prominently behind the window panel Generous space for high-end graphics cards and large coolers Side panel made of tempered glass Three-year manufacturer’s warranty HIGH AIRFLOW AND MAXIMUM PERFORMANCEAll parts optimized for airflow and performance For all who strive for maximum performance and especially with water-cooled systems, the Pure Base 500DX Black with its extremely air-permeable front and top cover is the right choice. The dust filters on the front and bottom are easy to remove for cleaning. THREE PREINSTALLED PURE WINGS 2 Whisper-quiet operation Three preinstalled Pure Wings 2 fans with airflow-optimized fan blades that ensure perfect airflow and cooling. Despite the compact case design the fans at the front, top and rear are 140mm models, resulting in very quiet operation. Up to two 140mm fans can be installed in addition. IMPRESSIVE ILLUMINATION ARGB light at the front and inside the case ARGB LEDs offer multiple colors and modes to individualize the look of the case from the inside as well as from the outside. You can optionally synchronize lighting with your motherboard or ARGB controller. SMART I/O PORTState-of-the-art technology for your systemA USB 3.1 Type C Gen. 2 connector is provided on the front I/O port and allows usage of latest hardware. There is also a switch on the front panel to control the interior and exterior LEDs. SOPHISTICATED DESIGN Generous space for high-end hardware The Pure Base 500DX Black provides generous dimensions to install high-end graphics cards and large coolers of up to 190mm in height. Fans or a radiator of up to 360mm can be installed easily at the front and the top area also provides space for more fans or a radiator of up to 240mm. EYE-CATCHING FEATURES And great cable routing possibilities Pure Base 500DX Black offers various options for installing up to five SSDs in total. Two can be installed for prominent viewing through the window panel. To hide any unwanted cables, the case offers excellent cable routing options. FUNCTIONAL PSU SHROUD Offering a neat interior The PSU shroud perfectly covers the cables and PSU. It also contains a double HDD cage with decoupled mountings that reduce vibrations and help maximize the silence. The cage can also be repositioned to install a radiator of up to 360mm at the front. The power supply unit can be easily installed from behind, mounted on the PSU bracket provided. TEMPERED GLASS WINDOWA perfect view inside your PCThe high-quality, fully-windowed side panel offers a perfect view of the components inside your PC case. The window is made of tinted and tempered glass with black painted side bars.
Showcase-Gehäuse aus Aluminium von Jonsbo, Open-Frame-Design mit futuristischem Look, Seitenteile aus Tempered Glass, bis zu 6x 120-mm-Lüfter möglich, Platz für einen 360er-Radiator, Schwarz
