Portos ARGB Mini Black Logic Portos ARGB Mini is a chassis created to build a powerful and modern gaming PC. WHEN IT'S THE INSIDE THAT COUNTS... Are you building a computer for gaming? And you want it to not take up too much space on your desk? Then of course you need a well-thought-out, well-designed and good-looking MINI ATX-sized case. Preferably still one with three mounted ARGB fans, an airy front and top, dust filters, and the side panel was made into a tempered glass door. This is where Case Logic Concept Portos ARGB MINI comes to the rescue. A concrete competitor for gaming tasks, providing good airflow, component culture, their safety and low temperatures of installed components. OPEN YOURSELF TO NEW A side panel made of tempered glass in the form of a hinged door makes it easier not only to install components, but also to keep the computer clean. Just open the door and clean the center with compressed air. Isn't it simple and practical? It's the only one we want to give you, because they simply belong to you. TO HOT COMPONENTS SAY "NO" An airy front and top panel significantly facilitates air circulation. Two 120 mm fans on the front and one 120 mm fan on the back Cases effectively cool the heated components. All for your comfort and the safety of your computer. Always willing to play Logic PORTOS ARGB MINI is a case created to build an efficient and modern gaming PC. Optimal airflow, practical solutions and pre-installed ARGB fans make up its gaming character. READY FOR GAMING COMPONENTS The ability to mount graphics cards up to 340 mm and a maximum CPU cooling height of 155 mm allows the installation of most high-performance components available on the market. PROTECT YOUR COMPUTER FROM DUST DUST FILTERS A dust filter has been placed under the power supply unit. It minimizes the amount of dust sucked in by the PSU's fan, positively affecting its operating temperature and service life. An additional filter is located on top of Cases. This effectively traps unwanted dust and protects the installed components. It protects against dust that enters the computer by gravity throughout the day, even when the computer is turned off. All the effective protection is complemented by mesh mesh on the front panel. OPTIMAL AIR CIRCULATION The ventilated front panel provides airflow with two, efficiently operating 120 mm fans. The back of Cases , on the other hand, features one pre-installed 120 mm fan This allows you to effectively cool the installed components of the computer's interior, positively influencing the culture of their operation and service life. As an option, it is possible to mount two 140 millimeter fans on the front of Cases in place of the factory-installed ones and two 120 or 140 millimeter fans on the top on their own. Case It is also adapted for installation of water cooling. ARGB BEAUTY Case for gamers must look nice. That's why the pre-installed ARGB fans add beauty to the case and the gaming stand. The color of the backlight can be changed at will from the predefined settings using the button on the control panel Cases. Convenient access to the top panel Convenient access to the top panel, and there are two USB 2.0 and one USB 3.0 connectors, plus one minijack connector for headphones and microphone, a power button and a button to control the fan backlight. SIMPLE INSTALLATION Everything here is well thought out and intuitive. Building a computer in this case is a pleasure and is child's play. POWER SUPPLY A gaming computer must have a good and powerful power supply. That's why we made sure that it has a home here! The maximum length of the power supply with the disk cage installed is 200 mm. A dust filter has been placed under the power supply, which effectively protects the operation of the power supply from dust 4 PCIe expansion card slots Four slots for PCIe expansion cards. This is the optimal number for mounting, among other things, a graphics card and a network card. SPACE FOR GAMES IN ABUNDANCE The mounting of HDD or SSD drives is obviously thought out here as well. Inside Cases at tunnel level there is a basket for 3.5" or 2.5" drives. On the motherboard tray, on the other hand, it is possible to mount an additional 2.5" drive. A total of 2 SSDs and 1 HDD or 1 SSD and 2 HDDs can be installed.
Horizon ARGB FLOW Midi Black Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
Internal 2x 3.5 "(transverse, hard drive cage), 2x 2.5", Front I / O 2x USB-A 3.0, 1x headphones, 1x microphone, PCI slots 4, Fan (front) 3x 120mm (optional) or 2x 140mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 320mm, Color white, inside black, Lighting without lighting, Dimensions (WxHxD) 225x431x400mm, Volume 38.79l, Weight 6.20kg, Housing type minitower, Special features Cable management, dust filter, graphics card holder, viewing window made of glass, w/o psu, R-MACUBE110-WHNGM1N-G-1
The ASUS A31 PLUS ATX case offers support for hidden-connector motherboards, 360mm radiators, and 380mm graphics cards, with Black or White color options, four pre-installed ARGB fans, and clean cable management. Ready for Hidden Connectors: Built for motherboards featuring hidden connectors to optimize cable management for a clutter-free setup. Broad Compatibility: The A31 PLUS supports up to 360mm radiators combined with fans of up to 80mm thick, plus graphics cards up to 380mm in length and CPU air coolers with heights of up to 165mm. Panoramic Design: Tempered glass panels on the front and side offer unobstructed views of the main chamber. 8° Angled Base: The golden angle combines functionality and aesthetics, enhancing airflow efficiency for better thermal performance while widening the viewing angle for a more immersive experience.
The MSI MPG VELOX 300R AIRFLOW PZ is a Midi Tower PC case in sleek black. It features a bottom-mounted power supply placement and supports ATX form factor PSUs. The case comes with 2x 160 mm front fans pre-installed and supports additional front fans of 120, 140, or 160 mm, as well as 120 mm side fans. Storage support includes both 2.5" and 3.5" HDDs, plus 2.5" SSDs. Dimensions are 235 mm (width) x 485 mm (depth) x 518 mm (height).
DIMENSIONS : (D)420mm X (W)269.5mm X (H)380mm MOTHERBOARD : E-ATX (Max 280 mm wide)/ATX/ Micro-ATX/ Mini-ITX PSU : SFX/ SFX-L MATERIAL : Steel 4 mm Tempered Glass 2mm Aluminum (top and left panel) FAN SUPPORT : Top: 3x 120mm or 2x 140mm Side: 2x 120mm or 2x 140mm Bottom: 3x 120mm or 2x 140mm Rear: 1x 120mm RADIATOR SUPPORT : Top: 360mm or 280mm or 240mm radiator Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator GPU LENGTH CLEARANCE : 395mm CPU COOLER HEIGHT CLEARANCE : 170mm VGA Length : 370mm DRIVES : Right side 2 x 2.5″ SSD + back plate 2 x 3.5″ HDD (or SSD) EXPANSION SLOTS : 3 or 5 or 7 slots (depends on back panel) IO PORTS : 2 x USB 3.0, 1 x USB 3.1 TYPE-C, 1 x HD Audio, Power Button DUST FILTERS : 1 x Top, 1 x Bottom, 2 x Side
The next generation of airflow cases from DeepCool has arrived, and they are indeed glorious. The CH560 DIGITAL is a newly designed mid-tower case with a concentrated focus on increased airflow throughout the entire chassis. Three bright PWM enabled 140mm ARGB fans are mounted in front of the main compartment, a hybrid side panel, and a dual status digital screen sets the CH560 DIGITAL apart from the competition. A BREATH OF FRESH AIR The CH560 DIGITAL provides exceptional airflow from all sides of the case, from the high airflow front to the hybrid tempered glass side panel, cool air is always available for the modern power-hungry components. HYBRID AIRFLOW GLASS SIDE PANEL A unique tempered glass and mesh hybrid side panel provides a crystal-clear view into the heart of your system while also supplying modern GPUs with additional ventilation: a functional yet elegant design. REAL-TIME DUAL-STATUS DIGITAL DISPLAY Monitor vital CPU and GPU information from the cockpit of your gaming station with the integrated double-status digital screen. Choose between CPU and GPU temperatures, utilization, or both (switches between temperature and utilization in 5-second intervals). A simple to use application will give you control of the display statuses. MAXIMUM COOLING CAPACITY The CH560 DIGITAL has a plethora of cooling configurations, from the ability to mount 360mm radiators on the top and front to the three included 140mm ARGB fans up front and a 120mm ARGB at the rear—the cooling configurations are endless. BIGGER, BRIGHTER, BETTER Three luminous PWM enabled 140mm ARGB fans come pre-installed on the front of the CH560 DIGITAL and introduce an abundant amount of fresh air into the chassis, these fans are mounted outside of the main compartment to provide maximum clearance for the largest of GPUs while maintaining a smaller footprint. The rear 120mm ARGB fan is also PWM enabled and will exhaust the warm air out of the chassis.
Spacious Micro-ATX case in black, for motherboards up to Micro-ATX, tempered glass side panel, up to 11x 120-mm fans possible, 2x radiators up to 360 mm possible, graphics cards up to 400 mm in length, dual-chamber design.
STARKER AIR BTF MID-TOWER CHASSIS STARKER AIR BTF STYLE. AIRFLOW. PERFORMANCE. XPG STARKER AIR BTF is the ultimate ATX PC case, crafted for extreme gamers seeking top-tier performance and design. It supports both standard E-ATX motherboards and ATX reverse-connector motherboards, offering versatility for various build configurations. With room for 360mm radiators and up to 12x 120mm fans, it ensures superior airflow and ventilation, keeping high-end components cool during intense gaming sessions. This PC case is built for those who demand both exceptional functionality and bold, cutting-edge design in their setups.
ARGB - Middle Tower | czarna | window | no power supply | 2 x USB 2.0, 2 x USB 3.0, 2 x Jack | 447mm x 220mm x 510mm | 4 x wen 120mm | ARGB backlight (NPC-1518)
MAG PANO 100R PZ / WHITE - Supported ATX and Micro-ATX Back-connect motherboard. - Supports 360 mm radiator on the top, side and bottom - 270-degree panoramic tempered glass. - Pre-installed with 3 x 120 mm ARGB Reverse-blade fan at the side and 1 x 120 mm ARGB fan at the rear. - 1-to-4 ARGB-Fan control board. - Synergize with a compatible MSI motherboard through bridging with a USB 20Gbps Type-C (20Gbps) port for high speed data transmission. - Removable dust filter at the top, side and bottom being easily removed for cleaning. - UNI front panel cable make your DIY process easier and create more possibilities to your system.
Initial version with a fan with reverse blades Reverse blade fans are pre-installed on the side, allowing the beauty of the ARGB fan to be unobstructed without any interference from the fan frames. Back-Connect motherboard support Back-plug motherboard support allows for easy installation without the worry of forgetting to connect cables, which might otherwise require removing graphics cards and coolers. 270 degree widescreen display Drawing inspiration from the MAG logo, create a distinctive chassis design that embodies MAG's unique features. The front interior of the case includes space for displaying figures, complemented by 270-degree panoramic tempered glass, transforming it into a business card-style case. Graphics processor support rack Equipped with a level indicator that allows easy adjustment of the support height during installation, preventing it from sagging. Meanwhile, its magnetic base ensures greater stability of the case. 1 to 4 ARGB-FAN control board This fan control board supports up to 4 ARGB fan functions. Allows you to use the LED switch button to intuitively adjust ARGB lighting.
The FP58 is a high quality device bay designed for those looking to add an optical drive to their PCs while maintaining streamlined look on the front panel. Its aluminum bezel is beautifully finished in hairline brush pattern and anodized to provide great match to either black or silver colored aluminum cases (FP58 is available in black or silver colored versions). The only break on the front bezel styling comes from a discreet cutout that works with slot-loading slim optical drive. In addition to fitting slim optical drive, the FP58 effectively uses the rest of the available 5.25” drive bay space for installation of up to four 2.5” hard drives or SSDs.SPECIAL FeaturesS- High quality brushed aluminum front panel available in black or silver- Discreet styling support slot-loading slim optical drive- Install up to four 2.5” hard drives or SSDs- Compatible with most computer casesWeight & dimensionsWeight 435 gWidth 148 mmDepth 150 mmHeight 42.3 mmDesignBlackStorageNumber of hard drives supported 4Hard drive size 2.5 "
