No. of drive bays: 3 MOLEX power connectors: 2 Floppy power connectors: 1 SATA power connectors: 4 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 0 Number of power supply connector 4+4-pin 12V: 1 8-pin 12V power connectors: 0 Weight: 3.55
The Thermaltake AH T600 is a helicopter styled open frame full tower case which comes with two 5mm tempered glass panels on left and right sides and can support motherboards up to E-ATX (up to 10.5'' wide).
Kompaktes Gehäuse für UCFF-Boards (Intel NUC), lüfterlose Kühlung durch passives Gehäusedesign, große Kühlfinnen, gebürstetes Aluminium in schwarz, Front mit 2x USB-3.0- und 2x USB-2.0-Ports, Platz für 1x 2,5-Zoll-Datenträger, VESA-kompatibel
MÕÕTMED: 215 x 473.5 x 454 EMAPLAADI TUGI: Mini ITX; Micro ATX; ATX GRAAFIKAKAARDI PIKKUS KUNI: 405 mm PROTSESSORI ÕHKJAHUTI KÕRGUS KUNI: 170 mm TOITEPLOKI ÜHILDUVUS: ATX; 17 cm KAABLITELE RUUM: Olemas KAAL: 7.2 kg Ühenduvus I/O PANEEL: 1 x headphones; 2 x USB 3.0; 1x microphone PCI PESASID KUNI: 7 Kettasahtlid: 4x 2.5" pesa 3x3.5" Ventilaatoritugi: ÜLESSE PAIGALDATUD - 1x Aspect 12 RGB ETTE PAIGALDATUD -2x Aspect 12 ÜLESSE VÕIMALIK PAIGALDADA 2x120/140 TAHA VÕIMALIK PAIGALDADA 1x120 ETTE VÕIMALIK PAIGALDADA 2x120/140 Radiaatoritugi: ÜLEVAL - 240 mm
Elegant Midi-Tower by InWin, unique cooling concept, power supply chamber at the top with mesh, space behind for vertically mounted radiators, semi-tall tempered glass side window, one pre-installed 120-mm ARGB PWM fan, I/O panel with USB 3.2 Type C.
MESH GEODE FRONT PANELInspired by asymmetrical crystal formations, the mesh front panel offers generous intake and efficient dust filtration.VERSATILE COOLING OPTIONSSupport for up to six fans and front, top, and rear radiator support ensure that performance is not compromised.FULL BLACK COATING & PSU COVERLet your system stand out with an all-black background and a PSU cover to hide cables.BREATHABLE POWER SUPPLY SHROUDThe ventilated PSU cover supports both active and passive cooled PSUs installed in multiple orientations.ROOM FOR UPGRADESSupport for up to a 350mm graphics card, a 161mm CPU cooler, and multiple fans/radiators locations provides room for upgrades.
Showcase case by Phanteks, with side panel and front made of Tempered Glass, supports up to 12x 120mm or 11x 140mm fans, up to four radiators at the same time, motherboards up to E-ATX and GPUs up to 490 mm, D-RGB strips and controller included
Water cooling The housing is suitable for water cooling installation. At the top of the case there is space for a radiator up to 360 mm. The same size cooler will also fit in place of the factory-installed fans on the front of the case. The same cooler (360 mm) can also be mounted on a dedicated frame of the motherboard wall, but its thickness cannot be greater than 52 mm. At the back, there is space for 120/140 mm water cooling. The introduced solutions are intended to create a real gaming machine for every game. And all this in a solid, airy construction. Without screws The times when you had to unscrew panels are long gone. In the Volcano Expanse case, we offer pleasant and simple solutions so that you can build your dream computer with a smile. All panels are mounted with snaps - you don't need any tools to remove the panel and conveniently install the components. Need to add RAM sticks? Blow out the dust from the interior? You can remove the panels with a smooth movement of your hand without having to unscrew them. Controller The case is equipped with an ARGB fan controller. Thanks to this, you can manage their speed and backlight. A total of 9 fans can be connected. At your fingertips The panel with USB/Audio inputs is placed at the top of the case, giving you convenient access to the connectors when the case is placed under the desk. There are 2 USB 3.0 connectors and one USB-C connector on the panel. Classically, there is also a microphone and headphone input, as well as a power button and fan control. Dust filter There is a dust filter under the power supply. You can easily remove and install the filter, which will keep your computer clean while increasing the efficiency and safety of the power supply and other installed components. It was designed for ease of assembly and disassembly, which is facilitated by structural elements equipped with magnets. Access to the filter is possible both from the front and back of the housing. Dust filters are also installed on the top and side panels. A place for your favorite games There will be plenty of space for your favorite games. The housing allows the installation of two 2.5 drives on the motherboard tray. Additionally, you can install two 3.5 mm in the power supply tunnel. With this amount of disk space, you can easily plan to install new games. Removable caps and vertical GPU mounting All PCI/PCIe expansion card caps are removable. Players will also appreciate the possibility of vertically mounting the graphics card, because the metal frame in which the caps are placed can be unscrewed.
The Antec FLUX White Midi Tower Case is a stylish and functional choice for your PC build. With a gross weight of 10.07 kg and dimensions of 31.2 cm in width and 57 cm in depth, this case provides ample space for your components. It supports a CPU cooler height of up to 180 mm and a maximum graphics card length of 408 mm, making it suitable for high-performance hardware. The sleek white design and ATX form factor ensure it fits seamlessly into any setup.
Elegantes und vielseitiges mATX-Gehäuse, geschlossene Front für Silent-Builds, Seitenteil aus Temperglas, bis zu 8 Lüfter und 3 Radiatoren möglich, für GPUs mit max. 400 mm Länge, versetzbares Netzteil für optimale Raumaufteilung
Compact dual-chamber midi tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case lid for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 in the front panel
VALOR AIR PLUS MID-TOWER CHASSIS VALOR AIR PLUS ENDLESS POSSIBILITIES XPG VALOR AIR PLUS mid-tower PC chassis offers a robust platform for future upgrades, accommodating mid-to-high-end components, including most RTX 40 series GPUs. Its high-airflow magnetic front panel enhances visual appeal, especially with ARGB fans, while ensuring superior ventilation. With 4x pre-installed 120mm ARGB fans included in select models, it delivers optimal cooling performance right out of the box.
großer Midi-Tower, mit Tempered Glass an Seite, bis zu 11 Lüfter, Platz für Radiatoren bis 360 mm, Mainboards bis ATX, GPU bis 400 mm und CPU-Kühler bis 171 mm Höhe, bis zu sechs Laufwerke möglich
Compact white mini-caseUp to five fans and breathable mesh ensure efficient airflowSupports motherboards up to Micro-ATXSpace for graphics cards up to 335 mm and CPU coolers up to 170 mm in heightConvenient carrying handle for transportThe Jonsbo C6 MAX: Portable mini-case with surprisingly ample spaceThe Jonsbo C6 MAX is a mini-case that provides enough space for high-end components despite its small size. Fans and breathable mesh on multiple sides ensure excellent airflow, efficiently cooling your hardware. Additionally, the tower is easy to transport with the practical carrying handle. If you have always wanted to take your gaming PC everywhere, the C6 MAX is worth a look!Efficient cooling with fans and radiatorsGood airflow is especially important in a small tower. Therefore, the C6 MAX can accommodate up to five fans. The top can hold either two 120 mm fans or one 140 mm fan, while the bottom can accommodate two additional 120 mm fans. The rear also supports a 120 mm fan. Together with the mesh on the top and front, this ensures that your hardware remains cool even in performance-intensive games.Space for your high-end hardwareThe mini-tower supports the installation of graphics cards up to 335 mm in size. Motherboards up to the Micro-ATX format are possible.The CPU cooler should not exceed a height of 170 mm, while the power supply can be up to 220 mm. A 2.5-inch or 3.5-inch drive can be installed for storing programs and games. Note that the fans on the bottom cannot be installed if you choose the 3.5-inch drive.
Micro-ATX case for DIY NAS, one pre-installed fan, GPUs up to 230 mm / CPU up to 70 mm height, 6x 3.5 / 2x 2.5 inch drives possible, 1x USB-C / 1x USB-A
