Horizon ARGB FLOW Midi Black Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
VALOR AIR PLUS MID-TOWER CHASSIS VALOR AIR PLUS ENDLESS POSSIBILITIES XPG VALOR AIR PLUS mid-tower PC chassis offers a robust platform for future upgrades, accommodating mid-to-high-end components, including most RTX 40 series GPUs. Its high-airflow magnetic front panel enhances visual appeal, especially with ARGB fans, while ensuring superior ventilation. With 4x pre-installed 120mm ARGB fans included in select models, it delivers optimal cooling performance right out of the box.
The ASUS A21 Plus system cabinet is a testament to functionality meeting aesthetics in PC building. Designed to accommodate microATX form factors, it supports a wide range of motherboards from Mini-ITX to microATX, ensuring compatibility for various builds. The chassis is not only practical with its extensive cooling support, including space for up to 3 credit cards 120 mm fans at the front, a 120 mm fan at the rear, and options for additional fans or radiators on the top, but it also boasts a visually appealing design with ARGB fans and a tempered-glass side panel. Internal bays are plentiful, with capacity for both 2.5" and 3.5" drives, facilitating ample storage solutions. Features like the meshed front panel, top and bottom dust filters, and a dedicated cable management system underscore the cabinet's commitment to both form and function. Whether for gaming, content creation, or everyday use, the ASUS A21 Plus offers a solid foundation for building a system that looks as good as it performs.
The CORSAIR FRAME 4000D is a modular tower chassis designed for airflow and cooling capabilities. Featuring a 3D Y-pattern airflow front panel and an InfiniRail fan mounting system, it ensures your system remains cool and efficient. The dual-windowed tempered-glass side panels provide a clear view of your internal components while adding to the aesthetic appeal of any build.With support for various radiator sizes and fan configurations, this chassis accommodates cooling setups, including space for 2 x 140 mm fans or up to 360 mm radiators in the front. Its layout includes multiple internal bays, allowing for a customizable storage solution. With connectivity options like USB 3.2 Gen 1 and USB-C 3.2 Gen 2 on the front panel, the FRAME 4000D elevates convenience and accessibility for users.
be quiet! Pure Base 600. Kujutegur: Miditorn, Tüüp: PC, Materjal: ABS-sünteetika, Teras. Toetatud elektritoite tarne vormi faktorid: ATX. Installitud esiventilaatorid: 1x 140 mm, Installitud tagaventilaatorid: 1x 120 mm
Internal 2x 2.5 "/3.5", Front I / O 2x USB-A 3.0, 1x USB-A 2.0, 1x headphones, 1x microphone, PCI slots 7, Fan (front) 3x 120mm (RGB illuminated), Fan (rear) 1x 120mm (RGB illuminated), Fan (top) 2x 120mm (optional), Radiator sizes 240mm front, 240mm top, Motherboard up to ATX, Power supply ATX (max 200mm deep), Power supply position below, CPU cooler up to max. 166mm height, Graphic cards up to max. 349mm, Color black, black painted inside, Dimensions (WxHxD) 203x505x436mm, Volume 44.70l, Weight 6.90kg, Special features Cable management, glass viewing window, GL-02B-OP
Internal 2x 3.5 "(transverse, hard drive cage), 2x 2.5", Front I / O 2x USB-A 3.0, 1x headphones, 1x microphone, PCI slots 4, Fan (front) 3x 120mm (optional) or 2x 140mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 320mm, Color white, inside black, Lighting without lighting, Dimensions (WxHxD) 225x431x400mm, Volume 38.79l, Weight 6.20kg, Housing type minitower, Special features Cable management, dust filter, graphics card holder, viewing window made of glass, w/o psu, R-MACUBE110-WHNGM1N-G-1
Arx 500 Air We've always had a sneak peek at the housings and we've seen a lot - and the sight of Arx 500 Air still makes us look like a big banana. No wonder, because we packed all our knowledge into it. Spoiler alert - it turned out like a dream. This is one of the largest (slightly shorter than the Arx 700 series) cases we have created. It is 486×228×429 mm - this is easily enough for, among others, a high cooling system (up to 179 mm), 7 fans (including 5 Stratus 140 PWM fans, which we provide at the start) and most graphics cards available on the market (up to 350 mm). . Everything sits in a pleasant draft, because the finely perforated front and top panels let in fresh air and block dust. You can check it through a tempered glass window.
ANTILA 39 Computer Midi Tower ATX PC Case. The computer case is equipped with three USB ports. The structure of the housing in black color gives elegance and the cable arrangement system allows you to organize the interior. At the top there is a ventilation grille with space for additional 120 mm fans and at the bottom there is a pollen filter.
Modular big tower in white, with touch-sensitive I/O panel, invertible interior, tempered glass side window, fan control and RGB controller, integrated RGB lighting, including 3x 140-mm fans.
Water cooling The housing is suitable for water cooling installation. At the top of the case there is space for a radiator up to 360 mm. The same size cooler will also fit in place of the factory-installed fans on the front of the case. The same cooler (360 mm) can also be mounted on a dedicated frame of the motherboard wall, but its thickness cannot be greater than 52 mm. At the back, there is space for 120/140 mm water cooling. The introduced solutions are intended to create a real gaming machine for every game. And all this in a solid, airy construction. Without screws The times when you had to unscrew panels are long gone. In the Volcano Expanse case, we offer pleasant and simple solutions so that you can build your dream computer with a smile. All panels are mounted with snaps - you don't need any tools to remove the panel and conveniently install the components. Need to add RAM sticks? Blow out the dust from the interior? You can remove the panels with a smooth movement of your hand without having to unscrew them. Controller The case is equipped with an ARGB fan controller. Thanks to this, you can manage their speed and backlight. A total of 9 fans can be connected. At your fingertips The panel with USB/Audio inputs is placed at the top of the case, giving you convenient access to the connectors when the case is placed under the desk. There are 2 USB 3.0 connectors and one USB-C connector on the panel. Classically, there is also a microphone and headphone input, as well as a power button and fan control. Dust filter There is a dust filter under the power supply. You can easily remove and install the filter, which will keep your computer clean while increasing the efficiency and safety of the power supply and other installed components. It was designed for ease of assembly and disassembly, which is facilitated by structural elements equipped with magnets. Access to the filter is possible both from the front and back of the housing. Dust filters are also installed on the top and side panels. A place for your favorite games There will be plenty of space for your favorite games. The housing allows the installation of two 2.5 drives on the motherboard tray. Additionally, you can install two 3.5 mm in the power supply tunnel. With this amount of disk space, you can easily plan to install new games. Removable caps and vertical GPU mounting All PCI/PCIe expansion card caps are removable. Players will also appreciate the possibility of vertically mounting the graphics card, because the metal frame in which the caps are placed can be unscrewed.
Portos ARGB Mini Black Logic Portos ARGB Mini is a chassis created to build a powerful and modern gaming PC. WHEN IT'S THE INSIDE THAT COUNTS... Are you building a computer for gaming? And you want it to not take up too much space on your desk? Then of course you need a well-thought-out, well-designed and good-looking MINI ATX-sized case. Preferably still one with three mounted ARGB fans, an airy front and top, dust filters, and the side panel was made into a tempered glass door. This is where Case Logic Concept Portos ARGB MINI comes to the rescue. A concrete competitor for gaming tasks, providing good airflow, component culture, their safety and low temperatures of installed components. OPEN YOURSELF TO NEW A side panel made of tempered glass in the form of a hinged door makes it easier not only to install components, but also to keep the computer clean. Just open the door and clean the center with compressed air. Isn't it simple and practical? It's the only one we want to give you, because they simply belong to you. TO HOT COMPONENTS SAY "NO" An airy front and top panel significantly facilitates air circulation. Two 120 mm fans on the front and one 120 mm fan on the back Cases effectively cool the heated components. All for your comfort and the safety of your computer. Always willing to play Logic PORTOS ARGB MINI is a case created to build an efficient and modern gaming PC. Optimal airflow, practical solutions and pre-installed ARGB fans make up its gaming character. READY FOR GAMING COMPONENTS The ability to mount graphics cards up to 340 mm and a maximum CPU cooling height of 155 mm allows the installation of most high-performance components available on the market. PROTECT YOUR COMPUTER FROM DUST DUST FILTERS A dust filter has been placed under the power supply unit. It minimizes the amount of dust sucked in by the PSU's fan, positively affecting its operating temperature and service life. An additional filter is located on top of Cases. This effectively traps unwanted dust and protects the installed components. It protects against dust that enters the computer by gravity throughout the day, even when the computer is turned off. All the effective protection is complemented by mesh mesh on the front panel. OPTIMAL AIR CIRCULATION The ventilated front panel provides airflow with two, efficiently operating 120 mm fans. The back of Cases , on the other hand, features one pre-installed 120 mm fan This allows you to effectively cool the installed components of the computer's interior, positively influencing the culture of their operation and service life. As an option, it is possible to mount two 140 millimeter fans on the front of Cases in place of the factory-installed ones and two 120 or 140 millimeter fans on the top on their own. Case It is also adapted for installation of water cooling. ARGB BEAUTY Case for gamers must look nice. That's why the pre-installed ARGB fans add beauty to the case and the gaming stand. The color of the backlight can be changed at will from the predefined settings using the button on the control panel Cases. Convenient access to the top panel Convenient access to the top panel, and there are two USB 2.0 and one USB 3.0 connectors, plus one minijack connector for headphones and microphone, a power button and a button to control the fan backlight. SIMPLE INSTALLATION Everything here is well thought out and intuitive. Building a computer in this case is a pleasure and is child's play. POWER SUPPLY A gaming computer must have a good and powerful power supply. That's why we made sure that it has a home here! The maximum length of the power supply with the disk cage installed is 200 mm. A dust filter has been placed under the power supply, which effectively protects the operation of the power supply from dust 4 PCIe expansion card slots Four slots for PCIe expansion cards. This is the optimal number for mounting, among other things, a graphics card and a network card. SPACE FOR GAMES IN ABUNDANCE The mounting of HDD or SSD drives is obviously thought out here as well. Inside Cases at tunnel level there is a basket for 3.5" or 2.5" drives. On the motherboard tray, on the other hand, it is possible to mount an additional 2.5" drive. A total of 2 SSDs and 1 HDD or 1 SSD and 2 HDDs can be installed.
GIGABYTE C301 GLASS V2 - Optimized Airflow Design - RGB Fusion with ARGB Connector Hub - Support Motherboards up to E-ATX - Up to 360mm Liquid Cooling Compatible - Support Vertical GPU Installation - Full-Size Tempered Glass Side Panel - With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel - Pre-installed 4 ARGB fans
The Chieftec Pro Mini AZ-01B-OP mini-tower chassis is a compact yet versatile solution for building high-performance systems. It supports mini ATX and microATX motherboards, offering flexibility for various system builds. The chassis includes a comprehensive cooling system with a rear 120 mm fan or radiator, front and top fan mounts capable of supporting up to 280 mm radiators, and additional mounts on the PSU shroud, ensuring optimal airflow and cooling efficiency. For those seeking a quieter computing experience, the Chieftec Pro Mini features sound dampening panels on the front and sides to minimize noise. Additionally, the front panel is equipped with USB-C, USB 3.0, and USB 2.0 ports, along with audio line-out and microphone jacks, providing convenient connectivity options. With its sleek design, efficient cooling, and quiet operation, the Chieftec Pro Mini AZ-01B-OP is an excellent choice for users looking to build a compact, powerful, and versatile system.
The Zalman i3 NEO ATX Mid Tower in white is a versatile and stylish computer case designed to support a wide range of form factors including Midi Tower, Mini ITX, Micro ATX, and ATX. It features a clean white design complemented by four ARGB fans, enhancing both its aesthetics and cooling performance. The case offers ample storage options with 3x 2.5" internal bays and 2x 3.5" bays. For connectivity, it is equipped with a comprehensive I/O panel that includes reset and power buttons, 2x USB 3.0 ports, 1x USB 2.0 port, and ports for a headphone and a microphone. The case measures 422 x 219 x 484 mm and weighs 5.6 kg, making it a compact and manageable option for building a high-performance PC.
The NZXT H5 Flow RGB chassis is designed to provide a mid-tower form factor with practical features for gamers and PC builders alike. Its airflow-optimized mesh design enhances cooling performance while the included RGB fans add a vibrant touch to your setup. The side panels are toolless, making it easy to access components, and the cable management system with 28 mm clearance helps maintain a clean interior. With a windowed tempered-glass side panel, the NZXT H5 Flow RGB showcases internal components beautifully. It supports multiple internal bays, allowing for versatile storage options and accommodating long graphics cards up to 410 mm. The chassis also offers excellent cooling support with compatibility for various fan sizes, including a radiator for effective heat dissipation.
Zalman P50 DS ATX Case with Tempered Glass and Panoramic View - Black The Zalman P50 DS ATX case in black is the perfect choice for demanding gamers and PC enthusiasts looking for an optimal mix of style and performance. With a large Panoramic View side panel made of tempered glass and a spacious interior, this case offers space for powerful components and showcases them in style. Main features of the Zalman P50 DS case: Panoramic Tempered Glass Side Panel : Allows a clear view of your hardware and gives the system a premium and professional look. Spacious ATX Format : Compatible with ATX, Micro-ATX and Mini-ITX motherboards, ideal for complex and powerful builds. Efficient Cooling : Support for multiple fans and water cooling for maximum heat dissipation and stability under load. Stylish black design : The timeless black blends perfectly into any environment and gives the setup a sophisticated finish. The Zalman P50 DS case is the ideal choice for anyone looking for an ATX case with generous space and elegant presentation. The combination of panoramic view and high-quality tempered glass makes it the perfect basis for high-end PC builds.
