The CORSAIR iCUE LINK 3500X RGB mid-tower case is designed for enthusiasts seeking a high-performance, aesthetically pleasing PC build. With its versatile cooling options, it supports multiple fan and radiator configurations, ensuring that your components stay cool under heavy load. The case is designed to be compatible with a broad range of motherboards, from Mini-ITX to Extended ATX, making it a suitable choice for builders planning to upgrade their system. The elegant tempered-glass panels on the side and front not only allow you to showcase your RGB components but also elevate the overall look of your setup. Additionally, the case features comprehensive dust filtration and high-speed connection options, including USB-C 3.2 Gen 2, making it a suitable contender for gamers and professionals.
Attractive dual-chamber midi-tower, by Lian Li and PCMR, three sides with mirrored and semi-transparent tempered glass, brushed aluminum, support for 2x 360-mm radiators simultaneously, up to 8x 120-mm fans, 1x USB-C and 2x USB-A 3.0 on the front panel.
Product kirjeldus: Zalman S2 TG - Torn - ATX Product Type: System cabinet Form Factor: Torn I/O Ühendusi: 2 x USB 2.0 1 x kõrvaklapid 1 x microphone 1 x USB 3.0 Supported Motherboards: ATX, microATX, Mini-ITX System Cabinet Features: Supports 120 mm radiator in rear, toetab 120 mm radiator in front panel, tempered glass side panel, bottom dust filter, top magnetic dust filter Power Device: No toiteplokk mõõtmed (WxDxH): 19.6 cm x 42.4 cm x 46.2 cm kaal: 5 kg
Housings are our middle name. We've been on this topic for years and it's hard to impress us, but the sight of ENDORFY Arx 500 ARGB gives us goosebumps. It's out of pride - although some say it's because of the low temperature inside the housing. We have included our best solutions (including 4 Stratus 140 PWM ARGB). As a result, you get one of the largest (486×228×429 mm, i.e. slightly shorter than the Arx 700 series) ENDORFY cases - with room for a tall cooling system (up to 179 mm), 7 fans and most available graphics cards (up to 350 mm ). The outside is also great - with a tempered glass window and front and top panels that act as filters, our ENDORFY Arx 500 ARGB can become a housing master. Come get some fresh air! We all know that long hours at work and on the battlefield (yes, there is a difference) = welded components that beg for a break over time. With Arx 500 ARGB you don't have such actions - the casing helps keep them pleasantly cool even when you remove the components from the factory. This is due to the spacious interior, which can accommodate up to 7 fans. Additionally, the housing panels act as filters - so you don't need additional protection against dust. Compared to traditional solutions, this single layer allows for better air circulation and makes it easier to keep the components in a pleasant draft (because cooling is extremely important to us). Lord of the winds When you look inside the Arx 500 ARGB, you immediately see that there is a specific team of cooling fans working inside. We packed 4 Stratus 140 PWM ARGBs in it, created in cooperation with Synergy Cooling, so you can be sure of adequate airflow and low temperature. Because winter never surprises us. The Stratus 140 PWM ARGB is our favorite. It's 14 cm tall, has an optional semi-passive mode and a durable FDB bearing, so you can count on quiet and smooth operation even in extreme conditions. We also added a splitter to control the fan speed using a PWM signal from one motherboard connector. With such a package you are like a real ruler of the storms. Panels with filters If we were to talk about the best option in the Arx 500 ARGB, in our opinion, we would choose excellent ventilation. This is provided, among others, (right after great fans) by panels made of finely perforated sheet metal. Some people will probably say that they can be replaced with put-on filters, but the truth is that the double anti-dust layer limits the air flow like metal armor in LARPs. And no one likes to have welded... components. That's why we made sure that the panels (front and top) in our case act as filters. This single protective layer makes the inside of the case as cool as a winter morning, and you don't have to install additional dust protection. Additionally, you can remove each filter and clean it with a cloth or a vacuum cleaner (or rinse it under running water) and it will take you literally a moment. Mister of casings We've already said it, but we'll say it again if there's ever a Mr. Housing election, the Arx 500 ARGB has a chance to make it to the podium. All we need to do is turn on the ARGB-lit fans inside and the title is ours. The tempered glass side highlights them like a dream. Everything's all right! If someone asked us to describe the Arx 500 ARGB in three words, we would say: Everything is fine! It's literally one of our largest cases, so it easily fits everything that's most important to you. Of course we mean components. Arx 500 ARGB is 486×228×429 mm, so you can pack a lot inside, for example a tall cooling system (up to 179 mm), 7 fans (including 4 you get from us at the start) and most graphics cards available on the market (up to 350 mm). There will also be a large power supply, you can mount it in the position that is most convenient for you. Its installation is not a philosophy, because we have added, among other things, a dedicated mounting frame. Light in the housing Equipment without a backlight is ok, but it's nice to see a light in the housing sometimes. With Arx 500 ARGB you have the option of just one click (the RESET button on the top of the housing is responsible for control) and your components will be illuminated with a cosmic glow. Thank your ARGB fans for that. Thanks to 4 Stratus 140 PWM ARGB lights (we installed them in the housing for you), you can freely configure the backlight. You can set them up in just a moment thanks to the built-in PWM and ARGB controllers - everything is immediately connected into one working whole, compatible with ENDORFY products with the ARGB mark (and compatible products from other manufacturers), so you can easily synchronize the backlight of the entire set based on Arx 500 ARGB. Even if it's your first assembly ever.
MÕÕTMED: 215 x 473.5 x 454 EMAPLAADI TUGI: Mini ITX; Micro ATX; ATX GRAAFIKAKAARDI PIKKUS KUNI: 405 mm PROTSESSORI ÕHKJAHUTI KÕRGUS KUNI: 170 mm TOITEPLOKI ÜHILDUVUS: ATX; 17 cm KAABLITELE RUUM: Olemas KAAL: 7.2 kg Ühenduvus I/O PANEEL: 1 x headphones; 2 x USB 3.0; 1x microphone PCI PESASID KUNI: 7 Kettasahtlid: 4x 2.5" pesa 3x3.5" Ventilaatoritugi: ÜLESSE PAIGALDATUD - 1x Aspect 12 RGB ETTE PAIGALDATUD -2x Aspect 12 ÜLESSE VÕIMALIK PAIGALDADA 2x120/140 TAHA VÕIMALIK PAIGALDADA 1x120 ETTE VÕIMALIK PAIGALDADA 2x120/140 Radiaatoritugi: ÜLEVAL - 240 mm
Initial version with a fan with reverse blades Reverse blade fans are pre-installed on the side, allowing the beauty of the ARGB fan to be unobstructed without any interference from the fan frames. Back-Connect motherboard support Back-plug motherboard support allows for easy installation without the worry of forgetting to connect cables, which might otherwise require removing graphics cards and coolers. 270 degree widescreen display Drawing inspiration from the MAG logo, create a distinctive chassis design that embodies MAG's unique features. The front interior of the case includes space for displaying figures, complemented by 270-degree panoramic tempered glass, transforming it into a business card-style case. Graphics processor support rack Equipped with a level indicator that allows easy adjustment of the support height during installation, preventing it from sagging. Meanwhile, its magnetic base ensures greater stability of the case. 1 to 4 ARGB-FAN control board This fan control board supports up to 4 ARGB fan functions. Allows you to use the LED switch button to intuitively adjust ARGB lighting.
Elegant midi-tower by ASUS in white, side panel made of tempered glass, removable top, 4x 140-mm fans with ARGB pre-installed, space for 1x 280/360-mm radiator, graphics cards up to 407 mm, 2x USB 3.2 Gen1 / 1x USB 3.2 Gen2x2 Type-C
Automatic RGB fan Equipped with top-quality system fans that cool the system and maximize its performance. System fan included The kit includes top-quality system fans that cool your system and ensure maximum performance Magnetic filter The magnetic dust filter on the top is designed to provide users with the best disassembly and cleaning experience. Optimized air flow This case supports the installation of up to 7 system fans and ensures ventilation of the entire system for better stability. Tempered glass The highest quality tempered glass, 4 mm thick, guarantees window durability and good visibility.
The XPG VALOR AIR is a breed of ATX chassis designed by XPG. Compatibility is the theme and capable of installing mid-to-high end of components. Its Streamline-Carving front panel design offers visual aesthetics when modding to ARGB gears, and to enhance airflow to be drawn in with 4 included 120mm fans.
Stylischer Midi-Tower in Schwarz, Front mit RGB-Beleuchtung, inkl. 4x 120-mm-ARGB-Lüfter, Temperglas-Seitenteil, mit Netzteilabdeckung, Grafikkarten bis 317 mm und CPU-Kühler bis 157 mm
Kompaktes Mini-ITX-Gehäuse von Raijintek, aus eloxiertem Aluminium, Rot mit schwarzem Innenraum und Rückseite, Zwei Seitenteile für tiefe Einblicke, für Mini-ITX-Mainboards und kleiner, 2x 2,5"- & 2x 2,5/3,5"-Slots, GPUs bis 28 cm & CPU-Kühler bis 13,5 cm
Ultrakompaktes Thin-Mini-ITX-Gehäuse, mit Rackmount-Frontblende, aus schwarzem Aluminium gefertigt, OEM-Version ohne Logo, extrem flach & passiv kühlend, vier interne 2,5-Zoll-Slots, je zwei USB-3.0/2.0-Ports
Dimensions: 201 x 435 x 435 mm (W x H x D) Material: Steel, Tempered Glass Weight: approx. 5.75 kg Colour: Black Form Factor: E-ATX (up to 279 mm wide), ATX, Micro-ATX, Mini-ITX Total Possible Fans: 3x 120 mm (Front) 2x 120 mm (Top) 1x 120 mm (Rear) Pre-Installed: 1x 120 mm Molex (Front) 1x 120 mm Molex (Rear) Radiator Mountings: 1x 240 mm (Front) 1x 240 mm (Top) Filter: Top, Bottom Drive Bays: 3x 3.5/2.5" (internal) Power Supply: 1x Standard ATX up to 200 mm (optional) Expansion Slots: 7 I/O Panel: 2x USB 2.0 (internal connection) 1x USB 3.0 (internal connection) 1x Audio In/Out Maximum GPU Length: 380 mm Maximum CPU Cooler Height: 160 mm
Lüfterloses Design-Case von Akasa, für den Raspberry Pi 4B, aus Aluminium, Aussparungen für alle wichtigen Anschlüsse, inklusive Kühlblöcke und Thermal-Pads und Wärmeleitpaste
