The HYTE X50 is a stylish midi-tower case designed for discerning PC enthusiasts who want to combine design and function. With its innovative internal structure and high-quality craftsmanship, it targets gamers, streamers, and builders with an eye for detail. Three-chamber layout separates heat sources for optimal airflow Supports up to ten 120 mm RGB fans for outstanding cooling performance 360 mm radiator support on both top and bottom for powerful water cooling Mesh front and side panels ensure optimal fresh air intake Magnetic cable management system for effortless, clean builds HYTE X50: Innovative cooling concept with clear separation The HYTE X50 uses an intelligent three-chamber design that physically separates the GPU, motherboard, and power supply. This creates unobstructed airflow that efficiently expels heat from the case. The direct stream of fresh air onto your graphics card keeps it cool even during graphics-intensive gaming or 3D rendering, consistently supplying it with air. Design meets functionality The case impresses with a curved side mesh panel that reliably supplies your system with air. Its clean, symmetrical design is not only eye-catching but also thoughtfully constructed. Radiators up to 360 mm can be installed at the top and bottom, so even high-end water cooling systems fit with ease. Modular interior and easy installation Building your system is made extremely simple thanks to thoughtful details like magnetically closing cable guides, tool-free front and side panels, and flexible mounts. Additionally, the USB-C port on the front provides lightning-fast access with up to 20 Gbit/s—perfect for modern peripherals and rapid data transfers.
The HYTE X50 is a stylish midi-tower case designed for demanding PC enthusiasts who want to combine design and functionality. With its innovative internal structure and high-quality workmanship, it targets gamers, streamers, and builders with an eye for detail. Three-chamber layout separates heat sources for optimal airflow Supports up to ten 120 mm RGB fans for exceptional cooling performance 360 mm radiator support on the top and bottom for powerful water cooling Panoramic glass side panel showcases your setup Magnetic cable management system for clean, effortless builds HYTE X50: Innovative cooling concept with clear separation The HYTE X50 utilizes an intelligent three-chamber design that physically separates the GPU, motherboard, and power supply. This allows for unobstructed airflow that efficiently expels heat from the case. With direct airflow to your graphics card, you can keep it cool even in graphically demanding games or during 3D rendering, ensuring it gets consistent air supply. Design meets functionality The case impresses with a curved glass side panel that elegantly showcases your system. The clean, symmetrical design is not only an eye-catcher but also thoughtfully constructed. Radiators up to 360 mm can be installed at the top and bottom, making room for even high-end water cooling systems. Modular interior and easy installation Building your system is made easy thanks to thoughtful features such as magnetically closable cable guides, tool-less front and side panels, and flexible mounting options. In addition, the USB-C port on the front offers lightning-fast access with speeds up to 20 Gbit/s—ideal for modern peripherals and rapid data transfers.
The HYTE X50 is a stylish midi-tower case designed for demanding PC enthusiasts who want to combine design and function. Its innovative internal structure and high-quality build make it perfect for gamers, streamers, and builders who pay attention to detail. Three-chamber layout separates heat sources for optimal airflow. Supports up to ten 120 mm RGB fans for exceptional cooling performance. 360 mm radiator support on both the top and bottom for powerful water cooling. Front and side panels made of mesh for optimal fresh air intake. Magnetic cable management system for effortless, clean builds. HYTE X50: Innovative cooling with clear separation. The HYTE X50 utilizes an intelligent three-chamber design that spatially separates the GPU, motherboard, and power supply. This creates unobstructed airflow, efficiently exhausting heat from the case. With a direct stream of fresh air to your graphics card, you keep it cool even during graphically intensive games or 3D rendering, ensuring a constant supply of air. Design meets functionality. The case impresses with a curved mesh panel on the side, reliably supplying your system with air. Its clean, symmetrical design is both visually striking and thoughtfully constructed. Radiators up to 360 mm can be installed at the top and bottom, providing space for high-end water cooling setups. Modular interior and easy installation. Building your system is made extremely easy by thoughtful details such as magnetically sealed cable guides, tool-free front and side panels, and flexible mounts. Additionally, the USB-C port on the front offers lightning-fast access with up to 20 Gbit/s — ideal for modern peripherals and fast data transfers.
Das View 270 Plus WS ARGB ist mit Hartglasplatten an der Vorder- und Seite des Gehäuses ausgestattet, um optimale Betrachtungswinkel für Ihr System im Inneren zu bieten. Das Gehäuse unterstützt Radiatoren von bis zu 360 mm auf der Oberseite des Gehäuses und kann den Kühldedarf einiger der anspruchsvolleren Systeme decken, während es gleichzeitig ein ansprechendes Erscheinungsbild beibehält, um Ihre Komponenten zur Geltung zu bringen. Das View 270 wird mit drei 120-mm-ARGB-Lite-Lüftern geliefert, von denen zwei seitlich angebracht sind, und ein weiterer an der Rückseite des Gehäuses, um eine Luftabfuhr zu bieten. Daisy-Chain Verbindungen vereinfachen die Verkabelung und die Beleuchtung kann über die Motherboard-Software von Asus, Gigabyte, MSI und ASRock gesteuert werden. Das View 270TG Plus kann bis zu zwei 2,5Zoll-SSDs oder zwei 3,5-Zoll-HDDs unterstützen, an jeweils einem dedizierten Speicherort und jeweils einem gemeinsam genutzten Speicherort. Zwei USB 3.0-Anschlüsse, ein USB 3.2 Gen 2 Typ C und HD-Audio Anschlüsse sind auf der Oberseite angebracht, um bei Bedarf direkten Zugriff zu ermöglichen.
Showcase-Gehäuse aus Aluminium von Jonsbo, Open-Frame-Design mit futuristischem Look, Seitenteile aus Tempered Glass, bis zu 6x 120-mm-Lüfter möglich, Platz für einen 360er-Radiator, Schwarz
Compact case with less than 9L volume; Supports up to m-ATX motherboards; 80mm fan pre-installed; Classic Design; 80PLUS Bronze 300W Power Supply Included
Edler Big-Tower von PHANTEKS in Weiß, für Mainboards bis E-ATX-Formfaktor, Front und Seitenteil aus Tempered Glass, Rückseite mit Mesh an Scharnieren, 3x 360er und 1x 240er Radiator möglich
Mid Tower Ceres 300 TG ARGB case The Ceres 300 TG ARGB Mid Tower Chassis is an ATX case shipped with two CT140 ARGB Sync PC cooling fans pre-installed on the front and one CT140 PC cooling fan pre-installed on the rear. Over 55% of the panels are perforated to provide ample airflow and support up to a 360mm radiator at the front and a 280mm radiator at the top. Mid Tower Ceres 300 TG ARGB case The Ceres 300 TG ARGB Mid Tower Chassis is an ATX case shipped with two CT140 ARGB Sync PC cooling fans pre-installed on the front and one CT140 PC cooling fan pre-installed on the rear. Its RGB lighting can be controlled via motherboard software from ASUS, GIGABYTE, MSI and ASRock. As many as 55% of the panels are perforated to ensure high air flow. Besides, a maximum of five 140mm fans or seven 120mm fans can be installed in the case, one 360mm radiator can be placed in the front and a maximum of one 280mm radiator in the top of the case, providing countless hardware options. Built for enormous airflow More than 55% of the panels are perforated With a large number of perforated cutouts, the Ceres 300 TG ARGB is designed for excellent cooling performance. Supports radiators with a diameter of up to 360 mm at the front and 280 mm at the top Our Ceres 300 provides many options for cooling components. Users can place a 360mm radiator at the front and a 280mm radiator at the top. Two CT140 ARGB Sync cooling fans and one CT140 cooling fan installed Ceres 300 TG ARGB is equipped with two 140 mm ARGB PWM fans at the front and one 140 mm PWM fan at the rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying extreme cooling performance. Air inlet and outlet The cooling performance of the Ceres 300 TG ARGB is extraordinary with two CT140 ARGB Sync PC cooling fans pre-installed at the front and one CT140 PC cooling fan pre-installed at the rear. In addition, over 55% of the panels are perforated, ensuring huge airflow through the perforated cutouts. Perfect protection against dust There are fine, removable filters on the top, front, bottom, left and right sides of the housing that provide excellent protection against dirt and can be easily removed for cleaning.
CTE C750 TG ARGB Snow Full Tower case The CTE C750 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support up to 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB Snow is a high-end presentation case that allows you to imagine something outside the box. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Snow Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance.
Midi-Tower PC case, tempered glass side panel, mesh front, 5x Kolink Umbra ARGB PWM fans, supports GPUs up to 330 mm, power supply shroud, compatible with ATX motherboards
Well-equipped Midi-Tower, front and side panel made of Tempered Glass, left side panel and top with ventilation slots, space for up to 9x 120mm or 6x 140mm fans, GPU length up to 420mm, ARGB strip on the front, up to two power supplies possible
CTE T500 TG ARGB Snow Full Tower Chassis The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support up to a 420mm AIO radiator at the front and a maximum 360mm AIO radiator at the rear. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE T500 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE T500 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. Experience the perfect combination of design and performance with our CTE T500 The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support a maximum of a 420mm AIO radiator at the front and a maximum of two 360mm AIO radiators at the front and rear. There's plenty of room to install cooling components, including front and rear fan brackets, top and right fan vents, bottom fan vent, and shroud vent, and the case can accommodate up to eleven 140mm/120mm fans. Other cool details include removable filters, pump and tank support, and Velcro straps for easy cable management. Our CTE T500 Snow is the perfect choice whether you're looking for a custom liquid cooling setup or a dual AIO setup! Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE T500 TG ARGB's versatile interior features two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Support for dual 360mm radiators Our CTE T500 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, allowing users to install up to two 360mm radiators simultaneously at the front and rear. To ensure AIO compatibility, users can install up to one 420mm AIO radiator on the front and up to two 360mm AIO radiator on the front and rear. All your dream cooling components will fit! The CTE T500 Full Tower case has a huge fan and cooler installation capacity: up to eleven 140 mm/120 mm fans and 360 mm AIO coolers in various locations (420 mm AIO cooler at the front). Moreover, equipped front and rear fan brackets and mounting locations on the top, right side and lid ensure easy installation of all desired cooling components. Rock your world with three pre-installed white 140mm CT140 ARGB fans The CTE T500 TG ARGB Snow Full Tower case is equipped with three white 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. We've tested everything, so you don't have to At Thermaltake, we always stress test our products under harsh conditions to ensure product quality. CTE T500 TG ARGB Snow Full Tower Chassis products have been tested at 100% full load for 30 minutes, with the highest-end CPU, GPU and motherboard at the time of testing, compared to a consumer-style configuration, which allowed us to test how the chassis handles in real-world situations.
Edler Big-Tower von Phanteks, geschlossenes Seitenteil, ideal als Server & Workstation & High-End-Gaming-Rig, optimiert für Luft- und Wasserkühlung, bis zu 503 mm lange Grafikkarten, zusätzliche seitliche Kühlung für GPUs und HDDs, für ATX- oder 2U-Netzteile
Zalman P10 micro-ATX Case with Tempered Glass and Panoramic View - Black The Zalman P10 micro-ATX case in black combines elegant design with an impressive panoramic view. The large side panel made of tempered glass offers an unrestricted view of your hardware and puts it in the spotlight. This case is ideal for demanding PC builders and gamers who value aesthetics and functionality. Main features of the Zalman P10 case: Tempered glass panoramic window : Provides a clear view of your components and gives your system a sophisticated look. Compact micro-ATX size : Perfect for powerful builds in a space-saving format. Excellent Cooling : Supports multiple fan options and allows the installation of water cooling for efficient heat dissipation. Stylish black design : Fits perfectly into any environment and stands out thanks to its high-quality workmanship. The Zalman P10 case with Panoramic View is the ideal choice for those who want to show off their components. With the combination of compact micro-ATX size and stylish design, this case is ideal for PC enthusiasts who do not want to compromise on looks.
