Eleganter Midi-Tower für Gaming-PCs, mit Front aus Walnussholz, kompatibel mit E-ATX Mainboards, Seitenteil aus Temperglas, bis zu 7x 120-mm-Lüfter oder 6x 140-mm-Lüfter, bis zu 2x 3,5-Zoll oder 4x 2,5-Zoll-Laufwerke, I/O-Panel mit 1x USB 3.1 Typ C und 2x USB 3.0 Typ A
The next generation of airflow cases from DeepCool has arrived, and they are indeed glorious. The CH560 DIGITAL is a newly designed mid-tower case with a concentrated focus on increased airflow throughout the entire chassis. Three bright PWM enabled 140mm ARGB fans are mounted in front of the main compartment, a hybrid side panel, and a dual status digital screen sets the CH560 DIGITAL apart from the competition. A BREATH OF FRESH AIR The CH560 DIGITAL provides exceptional airflow from all sides of the case, from the high airflow front to the hybrid tempered glass side panel, cool air is always available for the modern power-hungry components. HYBRID AIRFLOW GLASS SIDE PANEL A unique tempered glass and mesh hybrid side panel provides a crystal-clear view into the heart of your system while also supplying modern GPUs with additional ventilation: a functional yet elegant design. REAL-TIME DUAL-STATUS DIGITAL DISPLAY Monitor vital CPU and GPU information from the cockpit of your gaming station with the integrated double-status digital screen. Choose between CPU and GPU temperatures, utilization, or both (switches between temperature and utilization in 5-second intervals). A simple to use application will give you control of the display statuses. MAXIMUM COOLING CAPACITY The CH560 DIGITAL has a plethora of cooling configurations, from the ability to mount 360mm radiators on the top and front to the three included 140mm ARGB fans up front and a 120mm ARGB at the rear—the cooling configurations are endless. BIGGER, BRIGHTER, BETTER Three luminous PWM enabled 140mm ARGB fans come pre-installed on the front of the CH560 DIGITAL and introduce an abundant amount of fresh air into the chassis, these fans are mounted outside of the main compartment to provide maximum clearance for the largest of GPUs while maintaining a smaller footprint. The rear 120mm ARGB fan is also PWM enabled and will exhaust the warm air out of the chassis.
No. of drive bays: 4 MOLEX power connectors: 2 Floppy power connectors: 1 SATA power connectors: 4 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 0 Number of power supply connector 4+4-pin 12V: 1 8-pin 12V power connectors: 0 Weight: 4.75
MAG PANO 100R PZ / WHITE - Supported ATX and Micro-ATX Back-connect motherboard. - Supports 360 mm radiator on the top, side and bottom - 270-degree panoramic tempered glass. - Pre-installed with 3 x 120 mm ARGB Reverse-blade fan at the side and 1 x 120 mm ARGB fan at the rear. - 1-to-4 ARGB-Fan control board. - Synergize with a compatible MSI motherboard through bridging with a USB 20Gbps Type-C (20Gbps) port for high speed data transmission. - Removable dust filter at the top, side and bottom being easily removed for cleaning. - UNI front panel cable make your DIY process easier and create more possibilities to your system.
MAG PANO 100R PZ / WHITE - Supported ATX and Micro-ATX Back-connect motherboard. - Supports 360 mm radiator on the top, side and bottom - 270-degree panoramic tempered glass. - Pre-installed with 3 x 120 mm ARGB Reverse-blade fan at the side and 1 x 120 mm ARGB fan at the rear. - 1-to-4 ARGB-Fan control board. - Synergize with a compatible MSI motherboard through bridging with a USB 20Gbps Type-C (20Gbps) port for high speed data transmission. - Removable dust filter at the top, side and bottom being easily removed for cleaning. - UNI front panel cable make your DIY process easier and create more possibilities to your system.
With the LANCOOL 217 from Lian Li, you bring style, functionality, and performance into perfect harmony. This mid-tower case combines a natural wood look with powerful cooling and offers everything you need for modern PC builds – including pre-installed fans, a flexible layout, and wide motherboard compatibility. Wood meets high-end: Black with walnut accents 5 pre-installed fans: High-performance cooling straight out of the box Back-Connect-ready: Compatible with motherboards featuring rear connectors Flexible power supply mounting: Standard and rotated modes for more space and better airflow Tool-less fan mount: Quick and easy installation thanks to retaining clips Lian Li Lancool 217 in black: A case that combines design and performance demands The LANCOOL 217 impresses with its successful combination of solid steel, tempered glass, and decorative real wood elements. The perforated mesh front not only ensures maximum airflow but also completes the organic design. With its spacious interior layout, the case supports motherboards up to SSI-EEB, GPUs up to 380 mm in length, and CPU coolers up to 180 mm in height. Excellent cooling for high-end hardware The five pre-installed fans provide powerful airflow straight from the factory. You can flexibly choose between a GPU- or CPU-focused cooling scenario by simply adjusting the fan positions. Magnetic dust filters and tool-free installation make assembly easier, keep your setup clean, and ensure you can clean your system quickly and easily. PC case with easy installation of your components Another highlight of the LANCOOL 217 is the removable radiator bracket: It makes installing AIO water cooling with up to 360 mm radiators easier and creates extra space when installing hardware. Two power buttons in different locations make it easier to turn your PC on, depending on whether it sits on or under your desk. Thanks to thoughtful solutions such as the vertically mountable PCIe slot, HDD/SSD combination options, and generous cable management, the LANCOOL 217 is the perfect choice for style-conscious PC enthusiasts with high expectations.
Small case for simple systems Two low-profile expansion slots for graphics card Supports ITX-sized motherboards and CPU cooler height up to 38 mm Power supply: 1U Flex up to 150 mm One USB-C port on the I/O panel The Jonsbo NV10 in detail The Jonsbo NV10 is a small case that can be placed on your desk thanks to its light weight and fits into any setup with its simple black design. You can connect an external device to the USB-C port on the I/O panel. Hardware options The mini-tower supports the installation of ITX-sized motherboards. The CPU cooler should not exceed a height of 38 mm. In addition, the two low-profile expansion slots allow for the installation of a low-profile graphics card up to 190 mm. Please note that only a 1U Flex power supply unit no larger than 150 mm can be used.
The Raspberry Pi 5 case is made of ABS construction with cut-outs for the dual HDMI, Audio/Video, USB, Ethernet ports, as well as the USB-C power connector and access to the microSD card. The status LED can be easily visible through the rubber reflector. An optional clip-on lid can be removed to provide access to your Raspberry Pi's GPIO pins or connect a HAT. The case is a refinement of the Raspberry Pi 4 case, with improved thermal features to support the higher peak power consumption of Raspberry Pi 5. It integrates a variable-speed fan which is controlled by a dedicated connector on the Raspberry Pi 5 PCB. The case is available in Pi's signature red-white combination.
The CORSAIR Hydro X Series XF Ball Valve makes it easy to drain your custom cooling system, with a two-stage sealing valve that completely shuts off flow when closed.
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Compared to the D32 PRO, the D32 STD PC case addresses the midrange and budget segment with key features such as back-connect support and minimal front I/O.Elegant and space-saving design for mATX motherboardsSeamless cable management with cutouts for back-connect motherboardsTempered glass side panel provides a subtle appearanceAmple space for cooling solutions allows the installation of high-performance hardwareDust filter protects your hardware from annoying dust particlesThe Jonsbo D32 STD White: Space-saving and subtle case for a wide range of hardwareWhether a midrange HTPC or a high-end PC, builds of all kinds comfortably fit into the D32 STD White from Jonsbo. This minimalistic case accommodates graphics cards up to 365 mm long and CPU coolers up to 164 mm high.Thus, even with the compact design of the case, adequate cooling of your hardware is ensured. In combination with up to six 120 mm fans, or one 120 mm fan and four 140 mm fans, the fans also provide enormous airflow inside the case.No cable clutter with back-connectWith back-connect motherboards such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case is virtually free of visible cable clutter despite having the same footprint.Because most power and connection cables can be connected at the rear of the motherboard, you save time on cable management while still enjoying a clean look inside your case. Combined with the tempered glass side window, the view of your hardware is especially appealing.Powerful cooling in a small spaceTo ensure your high-performance hardware is sufficiently cooled even in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AIO, your hardware will always remain cool, even under load.The dust filter on the bottom and mesh side panel design ensure your hardware stays free of dust and dirt. This keeps your temperatures optimal at all times and helps increase the lifespan of your hardware.
Cabinet Form Factor: Midi Torn Mainboard Form Factor1Supported Mainboard Form Factor: ATXMicro ATX 3.5-inch Internal Drivesahtleid12.5-inch Internal Drivesahtleid: 2 Expansion pesasi1(3.5-mm minijack x 2) Power seadme tüüp: toiteplokk Optional Power Device Location1Lisatarvikud: Screws Chassis Features1kg Pieces in pack: 1Box kaal Brutto (kg): 3.62 kg Retail Packaging Netokaal Carton1kg Packs in Box: 1EAN Code: 42604556436031
VALOR AIR PLUS MID-TOWER CHASSIS VALOR AIR PLUS ENDLESS POSSIBILITIES XPG VALOR AIR PLUS mid-tower PC chassis offers a robust platform for future upgrades, accommodating mid-to-high-end components, including most RTX 40 series GPUs. Its high-airflow magnetic front panel enhances visual appeal, especially with ARGB fans, while ensuring superior ventilation. With 4x pre-installed 120mm ARGB fans included in select models, it delivers optimal cooling performance right out of the box.
Corsair mid-tower 3000D tempered glass case, white The white ATX mid-tower CORSAIR 3000D AIRFLOW provides intensive air circulation and excellent cooling. A steel front panel and two pre-installed CORSAIR SP120 ELITE fans ensure optimal airflow through the case, while a tempered glass side panel allows for easy viewing of components. Up to 8 120mm fans or up to 4 140mm fans can be accommodated in the intelligently organized interior. With room for radiators up to 360mm in size, support for 3.5" and 2.5" drives, and support for four-slot graphics cards up to 360mm in length, you can create a high-performance system. The front I/O panel has two USB 3.2 Type A ports and a microphone and headphone jack. Outstanding Cooling Capabilities: Spacious interior holds up to 8 x 120mm cooling fans or 4 x 140mm fans with multiple heatsinks including one 360mm front and one 280mm on top (depending on the height of the memory modules) RAM). CORSAIR AirGuide Technology: The two pre-installed SP120 ELITE fans generate 24.7 dBA of noise and feature CORSAIR AirGuide technology that increases static pressure and directs airflow for better cooling. Dedicated graphics card cooling: The case accommodates the latest graphics cards and has two additional 120mm fan mounts on the PSU shroud that allow you to install fans directing the airflow directly to the graphics card. Four-slot graphics capability: For an advanced, high-performance computing setup, you can freely install a four-slot graphics card up to 360mm in length into the chassis. Optimized front panel for intensive air circulation: The optimized steel front panel provides powerful airflow in the system for maximum cooling. Tempered glass side panel: Show off your internal components in elegant style. All the storage you need: Holds up to 2 SSDs and 2 HDDs.
Power supply included: No Other features: with USB 3.0 Other features: * Front mesh design provides superior ventilation to maintain constant cooling * Front I/O panel provides easy access for users * Side panel security lock hole for higher security * Side ventilation holes for better cooling performance * Front 120 mm fan provides the best cooling solution Cooling type: Front: 120 x 25mm fan x 1 80mm / 90mm (optional)Rear: 80 / 90 mm fan x 1 (optional)Side: 120 mm fan x 1 (optional) Dimensions (WxDxH): (W) 195 x (H) 370 x (D) 400 mm mm Height: (W) 195 x (H) 370 x (D) 400 mm mm Panel type: USB 3.0 x1, USB 2.0 x 1, Mic x1, Spk x1 Power: Standard ATX PS2 (optional) W Depth: (W) 195 x (H) 370 x (D) 400 mm mm Number of expansion slots: 4 Material: Steel Body ABS plastic Mesh Front bezel Drive bays: 5.25": 1 Exposed 3.5": 2 Hidden, 1 Exposed2.5": 1 Hidden, " Warranty: 24 month(s) Width: (W) 195 x (H) 370 x (D) 400 mm mm Weight: Net Weight: 4.0 kg / 8.84 lbsGross Weight: 5.1 kg / 11.24 lbs g Expansion slots: 4 Colour of product: Black Gross weight: 3.86 kg Net weight: 3.00 kg Form factor: Micro ATX Power supply type: ATX Producer product name: Smarter
LANCOOL III Mid-tower modular chassis for all kinds of configurations Equipped with 4 × 140 PWM fans (ARGB or non-RGB) Featured airflow optimized mesh structure and hinged side panels Supports up to 420 radiator or 3 x 360 radiators and a maximum of 10 fans Offers 12 storage drives mounting locations Upgraded cable management solution for a clean build
