No. of drive bays: 4 Dimensions: Product dimension: (L x W x H) 407 x 215 x 455 mm Weight: 5.39 Other features: PCI expension slots: 7 Dust filter: 1 x top, 1 x bottom(PSU), 1 x front Fans control by: Motherboardremote controllerLED buttonVoice control/ Fans included: 4 x 120 mm ARGB, 6 pin, 1200 RPM (3 x front, 1 x rear) connected to the controller Fan support: front: 3 x 120/140 mm lub 2 x 200 mm rear: 1 x 120 mm top: 2 x 120 (140) mm bottom: 2 x 120 mm Watercooling support: front: 1 x 120/240/360 mm rear: 1 x 120 mm top: 1 x 120/240 mm Product dimension: (L x W x H) 407 x 215 x 455 mm Chassis material: SPCC 0.6 mm Front Panel Material: Big hole mesh Net/gross weight: 5.39 / 6.04 kg
Horizon ARGB FLOW Midi White Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
Compact Micro-ATX case with wood decor, made of steel and plastic, for Micro-ATX or Mini-ITX motherboards, four-slot GPU up to 415 mm, suitable for 360 mm radiator
No. of drive bays: 9 Weight: 6.46 Other features: The maximum length of the PSU 190 mmMaximum CPU cooling height 165 mmMaximum length of the GPU graphics card 380 mm
Internal 2x 3.5 "(transverse, hard drive cage), 2x 2.5", Front I / O 2x USB-A 3.0, 1x headphones, 1x microphone, PCI slots 4, Fan (front) 3x 120mm (optional) or 2x 140mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 320mm, Color white, inside black, Lighting without lighting, Dimensions (WxHxD) 225x431x400mm, Volume 38.79l, Weight 6.20kg, Housing type minitower, Special features Cable management, dust filter, graphics card holder, viewing window made of glass, w/o psu, R-MACUBE110-WHNGM1N-G-1
MÕÕTMED: 215 x 473.5 x 454 EMAPLAADI TUGI: Mini ITX; Micro ATX; ATX GRAAFIKAKAARDI PIKKUS KUNI: 405 mm PROTSESSORI ÕHKJAHUTI KÕRGUS KUNI: 170 mm TOITEPLOKI ÜHILDUVUS: ATX; 17 cm KAABLITELE RUUM: Olemas KAAL: 7.2 kg Ühenduvus I/O PANEEL: 1 x headphones; 2 x USB 3.0; 1x microphone PCI PESASID KUNI: 7 Kettasahtlid: 4x 2.5" pesa 3x3.5" Ventilaatoritugi: ÜLESSE PAIGALDATUD - 1x Aspect 12 RGB ETTE PAIGALDATUD -2x Aspect 12 ÜLESSE VÕIMALIK PAIGALDADA 2x120/140 TAHA VÕIMALIK PAIGALDADA 1x120 ETTE VÕIMALIK PAIGALDADA 2x120/140 Radiaatoritugi: ÜLEVAL - 240 mm
Prime AP201 Tempered Glass | Max GPU Length 338 mm; PSU Length 140-180 mm | Micro | PSU Not included | Top: 3 x 120 mm; 2 x 140 mm, Rear: 1 x 120 mm, Pre-installed Fans (Rear): 1 x 120 mm | Dimensions 205 x 350 x 460 mm
The Lian Li LANCOOL 216 RGB White E-ATX Case is a stylish mid-tower case designed for E-ATX motherboards. It features three radiator mounts for water cooling (1x 240mm / 2x 360mm), a tempered glass side panel, and comes with three pre-installed fans (2x 160mm ARGB / 1x 120mm). It also includes a fan and ARGB hub for easy customization and control.
Tootekood: DS900 White + fansGTIN: 5905316148963Korpused
Computer case Darkflash DS900 (white) + 7 ARGB FansDarkflash DS900 is a modern solution for demanding users who value both aesthetics and functionality. The distinctive white design with a panoramic design without an A-pillar, equipped with double fully transparent glass walls, not only looks striking, but also provides excellent visibility of components. The case is designed to provide optimal cooling, performance and versatility, while offering ease of modification and expansion of computer systems. In the set you will find 7 ARGB 120 mm fans.Durability and aestheticsThe Darkflash DS900 stands out for more than just its looks. It is an enclosure built with durability in mind. The support mechanism and sturdy construction provide stability and security for all computer components, which is especially important for system expansion.Effective coolingEvery computer needs a good cooling system, and the DS900 provides it without question. The ability to mount up to 10 120 mm fans and a large 360 mm heatsink makes the case ideal for those who expect high performance and reliability, especially during intensive use.Protection and ease of useThe case is designed to protect the inside of the computer from dust, which is important for maintaining cleanliness and performance. In addition, its clever design makes it easy to upgrade and expand components, which is especially useful for users who want to build exactly the system they want.Compatibility and expansionThe Darkflash DS900 is compatible with a wide range of motherboards, including ATX, M-ATX and ITX, giving users freedom of choice and flexibility in configuring their systems. Additionally, seven PCI slots allow for further expansion and customization of the chassis.IncludedHousing120 mm Fan DM12F x 7ManufacturerDarkflashModelDS900ColorWhiteDimensions434 x 218 x 454 mmMaterial0.5 mm SPCCCompatible motherboardsATX/M-ATX/ITXHDD/SDD2/2Number of additional slots7Maximum VGA length425 mmMaximum CPU height170 mmPower supplyATX at the bottomHeatsink systemSide: 120 mm x 3; Rear: 120 mm x 1; Top: 120 mm x3/140 mm x 2; PSU: 120 mm x 2; HDD: 120 mm x 1.Front panelTempered glassLeft panelTempered glassI/OUSB 3.0 x 1/ USB 2.0 x 1/ LED/Power/Reset/HD Audio switch
Kompaktes Thin-Mini-ITX-Gehäuse von Akasa, 1x 2,5-Zoll HDD/SSD, Vorbereitungen für 4x Serial Port, 2x USB 2.0 Typ A-Buchse, 2x 3,5-mm-Audio-Buchse, VESA-kompatibel
