Format ATXMaximum graphics card lenght 345 mmMaximum CPU-Cooler Height 165 mmSpecial Featuress klassisches Design - Made in Germany; besonders leise dank integratedr soundproofing and stimmiger Konzeption; höchst effizientes, nahezu unhörbares Belüftungssystem; maximale functionalität and Variabilität; two 140-mm- or 120-mm-Fan an der Oberseite einbaubar; ein 140-mm- or 120-mm-Fan am chassisboden einbaubar; Fansteuerung for up tosechs FanPower Supply SlotDesign ATXDrive Baysexternal 5,25 inches 3internal 3,5 inches 52,5 inches 3FansIncluded 3x 120 mmInstallable 3x 140 mmFront-SideSpecial Featuress two 120-mm-Fan included (1300 U/min.)Ports USB 2.0 1USB 3.0 2Audio 2Back-SideSlots Full-Size 7Watercooling Hose Opening 4Product dimensions 207 x 456 x 520 mmWeight 9.3 kg
Internal 2x 2.5 "/3.5" (transverse, hard disk cage), 2x 2.5 ", Front I / O 1x USB-A 3.0, 2x USB-A 2.0, 1x microphone, 1x headphone, PCI slots 4, Fan (front) 2x 140mm (optional), Fan (rear) 1x 120mm, 1000rpm, 16dB (A), Fan (top) 1x 200mm (optional) or 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 330mm, Color black, inside black, Lighting integrated LED control, integrated RGB LED lighting, Dimensions (WxHxD) 220x411x441mm, Volume 39.88l, Weight 6.10kg, Housing type mini tower, Special features dust filter, viewing window made of glass, CA-1Q9-00S1WN-00
Riesiger Dual-Chamber Big-Tower, Seitenteil und Front aus Tempered Glass, Grafikkarten bis 446 mm, 3x 360-mm-Radiatoren gleichzeitig möglich, Deckel und Seitenwand aus Aluminium, bis zu 10x 120-mm-Lüfter, 1x USB Typ C und 4x USB 3.0 im Frontpanel
No. of drive bays: 4 Dimensions: Product dimension: (L x W x H) 407 x 215 x 455 mm Weight: 5.39 Other features: PCI expension slots: 7 Dust filter: 1 x top, 1 x bottom(PSU), 1 x front Fans control by: Motherboardremote controllerLED buttonVoice control/ Fans included: 4 x 120 mm ARGB, 6 pin, 1200 RPM (3 x front, 1 x rear) connected to the controller Fan support: front: 3 x 120/140 mm lub 2 x 200 mm rear: 1 x 120 mm top: 2 x 120 (140) mm bottom: 2 x 120 mm Watercooling support: front: 1 x 120/240/360 mm rear: 1 x 120 mm top: 1 x 120/240 mm Product dimension: (L x W x H) 407 x 215 x 455 mm Chassis material: SPCC 0.6 mm Front Panel Material: Big hole mesh Net/gross weight: 5.39 / 6.04 kg
Midi-tower case, with tempered glass side panel, top and front with mesh, three integrated PWM-ARGB fans, subtle ARGB lighting with integrated control.
MÕÕTMED: 215 x 473.5 x 454 EMAPLAADI TUGI: Mini ITX; Micro ATX; ATX GRAAFIKAKAARDI PIKKUS KUNI: 405 mm PROTSESSORI ÕHKJAHUTI KÕRGUS KUNI: 170 mm TOITEPLOKI ÜHILDUVUS: ATX; 17 cm KAABLITELE RUUM: Olemas KAAL: 7.2 kg Ühenduvus I/O PANEEL: 1 x headphones; 2 x USB 3.0; 1x microphone PCI PESASID KUNI: 7 Kettasahtlid: 4x 2.5" pesa 3x3.5" Ventilaatoritugi: ÜLESSE PAIGALDATUD - 1x Aspect 12 RGB ETTE PAIGALDATUD -2x Aspect 12 ÜLESSE VÕIMALIK PAIGALDADA 2x120/140 TAHA VÕIMALIK PAIGALDADA 1x120 ETTE VÕIMALIK PAIGALDADA 2x120/140 Radiaatoritugi: ÜLEVAL - 240 mm
MAG FORGE 320R AIRFLOW / WHITE - Supports up to 360 mm AIO liquid cooler and large 40 series GPU. - Supports up to 11 x system fans configuration, providing ventilation and stable performance to the whole system. - Built-in ARGB fans and control board, providing striking lighting and vivid lighting effects. - Tempered Glass Side Panel displays RGB lighting effects. - The Magnetic Dust Filter on the top vents being easily remove for cleaning. - Uni Front Panel Cable makes your DIY process easier. - LED Switch button provides intuitively control & 9 lighting effects.
Housings are our middle name. We've been on this topic for years and it's hard to impress us, but the sight of ENDORFY Arx 500 ARGB gives us goosebumps. It's out of pride - although some say it's because of the low temperature inside the housing. We have included our best solutions (including 4 Stratus 140 PWM ARGB). As a result, you get one of the largest (486×228×429 mm, i.e. slightly shorter than the Arx 700 series) ENDORFY cases - with room for a tall cooling system (up to 179 mm), 7 fans and most available graphics cards (up to 350 mm ). The outside is also great - with a tempered glass window and front and top panels that act as filters, our ENDORFY Arx 500 ARGB can become a housing master. Come get some fresh air! We all know that long hours at work and on the battlefield (yes, there is a difference) = welded components that beg for a break over time. With Arx 500 ARGB you don't have such actions - the casing helps keep them pleasantly cool even when you remove the components from the factory. This is due to the spacious interior, which can accommodate up to 7 fans. Additionally, the housing panels act as filters - so you don't need additional protection against dust. Compared to traditional solutions, this single layer allows for better air circulation and makes it easier to keep the components in a pleasant draft (because cooling is extremely important to us). Lord of the winds When you look inside the Arx 500 ARGB, you immediately see that there is a specific team of cooling fans working inside. We packed 4 Stratus 140 PWM ARGBs in it, created in cooperation with Synergy Cooling, so you can be sure of adequate airflow and low temperature. Because winter never surprises us. The Stratus 140 PWM ARGB is our favorite. It's 14 cm tall, has an optional semi-passive mode and a durable FDB bearing, so you can count on quiet and smooth operation even in extreme conditions. We also added a splitter to control the fan speed using a PWM signal from one motherboard connector. With such a package you are like a real ruler of the storms. Panels with filters If we were to talk about the best option in the Arx 500 ARGB, in our opinion, we would choose excellent ventilation. This is provided, among others, (right after great fans) by panels made of finely perforated sheet metal. Some people will probably say that they can be replaced with put-on filters, but the truth is that the double anti-dust layer limits the air flow like metal armor in LARPs. And no one likes to have welded... components. That's why we made sure that the panels (front and top) in our case act as filters. This single protective layer makes the inside of the case as cool as a winter morning, and you don't have to install additional dust protection. Additionally, you can remove each filter and clean it with a cloth or a vacuum cleaner (or rinse it under running water) and it will take you literally a moment. Mister of casings We've already said it, but we'll say it again if there's ever a Mr. Housing election, the Arx 500 ARGB has a chance to make it to the podium. All we need to do is turn on the ARGB-lit fans inside and the title is ours. The tempered glass side highlights them like a dream. Everything's all right! If someone asked us to describe the Arx 500 ARGB in three words, we would say: Everything is fine! It's literally one of our largest cases, so it easily fits everything that's most important to you. Of course we mean components. Arx 500 ARGB is 486×228×429 mm, so you can pack a lot inside, for example a tall cooling system (up to 179 mm), 7 fans (including 4 you get from us at the start) and most graphics cards available on the market (up to 350 mm). There will also be a large power supply, you can mount it in the position that is most convenient for you. Its installation is not a philosophy, because we have added, among other things, a dedicated mounting frame. Light in the housing Equipment without a backlight is ok, but it's nice to see a light in the housing sometimes. With Arx 500 ARGB you have the option of just one click (the RESET button on the top of the housing is responsible for control) and your components will be illuminated with a cosmic glow. Thank your ARGB fans for that. Thanks to 4 Stratus 140 PWM ARGB lights (we installed them in the housing for you), you can freely configure the backlight. You can set them up in just a moment thanks to the built-in PWM and ARGB controllers - everything is immediately connected into one working whole, compatible with ENDORFY products with the ARGB mark (and compatible products from other manufacturers), so you can easily synchronize the backlight of the entire set based on Arx 500 ARGB. Even if it's your first assembly ever.
Initial version with a fan with reverse blades Reverse blade fans are pre-installed on the side, allowing the beauty of the ARGB fan to be unobstructed without any interference from the fan frames. Back-Connect motherboard support Back-plug motherboard support allows for easy installation without the worry of forgetting to connect cables, which might otherwise require removing graphics cards and coolers. 270 degree widescreen display Drawing inspiration from the MAG logo, create a distinctive chassis design that embodies MAG's unique features. The front interior of the case includes space for displaying figures, complemented by 270-degree panoramic tempered glass, transforming it into a business card-style case. Graphics processor support rack Equipped with a level indicator that allows easy adjustment of the support height during installation, preventing it from sagging. Meanwhile, its magnetic base ensures greater stability of the case. 1 to 4 ARGB-FAN control board This fan control board supports up to 4 ARGB fan functions. Allows you to use the LED switch button to intuitively adjust ARGB lighting.
Automatic RGB fan Equipped with top-quality system fans that cool the system and maximize its performance. System fan included The kit includes top-quality system fans that cool your system and ensure maximum performance Magnetic filter The magnetic dust filter on the top is designed to provide users with the best disassembly and cleaning experience. Optimized air flow This case supports the installation of up to 7 system fans and ensures ventilation of the entire system for better stability. Tempered glass The highest quality tempered glass, 4 mm thick, guarantees window durability and good visibility.
Kompaktes Mini-ITX-Gehäuse von Raijintek, aus eloxiertem Aluminium, Rot mit schwarzem Innenraum und Rückseite, Zwei Seitenteile für tiefe Einblicke, für Mini-ITX-Mainboards und kleiner, 2x 2,5"- & 2x 2,5/3,5"-Slots, GPUs bis 28 cm & CPU-Kühler bis 13,5 cm
