Korpused

Thermaltake korpus Chassis Stand Kit for The Tower 600 must

Fortron korpus FSP M580-BA (must, Tempered Glass x 2)

Thermaltake korpus The Tower 250 (mint/beere, Tempered Glass)

Thermaltake korpus The Tower 250 (hellblau, Tempered Glass)

Geh Antec CX800 Wood ARGB_B Midi Tower schwarz retail

Raider SL-2 | MiniTower | PSU Not included | Pre-installed 2x 120mm at top + 1x 120mm at rear. | Dimensions 195 x 295 x 395 mm

Darkflash DB330M Mesh computer case (white)Darkflash DB330M Mesh is a computer case designed for M-ATX and ITX standard motherboards. Its dimensions (368 × 218 × 400 mm) allow the construction of a compact set-up with a graphics card up to 305 mm long and CPU cooling up to 180 mm high. The design is based on a 0.5 mm SPCC steel frame and features a tempered glass panel and mesh front for efficient air or liquid cooling.Efficient air coolingThe Darkflash DB330M Mesh case supports up to 7 fans: 2 at the front, 2 at the bottom, 2 at the top and one at the rear. The top part of the design allows for the installation of fans in 120 or 140 mm sizes, while the remaining locations are provided for 120 mm fans only. This arrangement allows for the creation of a vertical cooling channel that promotes natural air circulation and efficiently dissipates heat from components.240 mm liquid coolingThe Darkflash DB330M Mesh allows you to mount a water cooler of up to 240 mm in the top. This allows you to install a high-performance AIO system without sacrificing other components. The maximum height of the air cooler is 180 mm.Mesh panel with filterThe front panel of the case is made of mesh, which improves airflow and also acts as a dust filter. Additional vents are also located on the top and bottom of the design.Space for longer GPUsA graphics card up to 305 mm in length can be mounted inside. The chassis offers 4 PCI slots, making it possible to mount two- and three-slot cards. The power supply compartment and cable space do not limit the length of the GPU.Glass side panelThe left panel is made of tempered glass to expose the computer's interior and components with RGB backlighting. The panel can be easily removed without tools.Separate space for cables and multiple portsThe back of the case features a contoured space and pass-through holes for orderly cable routing. This layout makes it easier to install components and improves airflow in the main compartment. The front panel features a USB 3.0 port, 2 USB 2.0 ports, one HD Audio port and a power button. This allows you to enjoy quick access to basic functions without having to reach the back of the case.ATX power supply compatibility and board supportThe bottom of the case has room for a standard ATX power supply. This makes it possible to mount full-power units without the space constraints typical of smaller enclosures. In addition, the Darkflash DB330M Mesh supports M-ATX and ITX motherboards, offering optimal conditions for building a home, office or gaming PC. The lack of pre-installed fans allows for individual selection of cooling components. ManufacturerDarkflashModelDB330M Mesh WhiteHousing typeMidi TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardAt the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x1Expansion card slots4Max PSU length210 mmMax length of graphics card305 mmMax height of CPU cooler180 mmMax number of fans7Fan mounting optionsTop: 120 mm x2 / 140 mm x2; Bottom: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1Water cooling mounting optionsTop: 240 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPowerConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorWhiteHeight400 mmWidth218 mmDepth368 mmWeight3.8 kg

Thermaltake korpus View 170 TG ARGB (rosa, Tempered Glass x 2)

White mini tower, supports motherboards up to Micro-ATX, accommodates 3x 2.5- or 3.5-inch drives, CPU cooler up to 145 mm in height, GPU up to 260 mm, 2x 120 mm fans pre-installed at the frontStylish mini case with three sides made of tempered glass Two 120 mm fans pre-installed at the front, with option for an additional fan up to 92 mm at the rear Supports Micro-ATX motherboards and CPU coolers up to 145 mm in height GPUs up to 260 mm in length Supports up to three 2.5- or 3.5-inch drives The Jonsbo V12 in Detail The Jonsbo V12 is a mini case that, despite its compact size, provides ample space for powerful hardware. Tempered glass on three sides gives you a perfect view of your installed components, and a stylish wooden front completes the overall aesthetic. Cooling The mini tower comes pre-installed with two 120 mm fans, ensuring efficient cooling. If needed, an additional fan up to 92 mm can be installed at the rear. Hardware Options The mini tower supports the installation of Micro-ATX size motherboards. The CPU cooler should not exceed 145 mm in height. The graphics card can be up to 260 mm long. For storage, up to three drives can be installed to accommodate programs and games.

Darkflash F1 computer case (Black) + 6 fansDarkflash F1 is a midi tower computer case created for gamers and custom build enthusiasts. Its modern design with a large tempered glass panel allows to display components in an interesting way and looks great on gaming workstations. It is also distinguished by its spacious interior, which can easily accommodate selected components. It is a combination of elegant design and practical solutions that make assembling and using the computer a real pleasure. The kit also includes six ARGB fans.Spacious interiorDespite its compact size (436 x 240 x 436 mm), the case offers plenty of space for components. It will accommodate graphics cards up to 350 mm in length and CPU coolers up to 200 mm in height. There are also five slots for expansion cards. You can also fit an M-ATX or ITX motherboard and three HDDs or SSDs. So you can easily build both a high-performance gaming PC and a workstation for creative work.Efficient coolingThe Darkflash F1 case supports extensive cooling systems - both air and water. It allows the installation of up to nine fans or a 360/280 mm heatsink. In addition, holes located on the top and rear panels ensure optimal airflow. So you can play dynamic games or use demanding programs without worrying that your computer will overheat! In addition, you will find six ARGB fans in the set, which not only guarantee effective cooling, but also look great - they will give your configuration a unique character.Useful connectors at your disposalA set of useful connectors - two USB-A 3.0 ports, one USB-C port and HD Audio - is located at the bottom of the case. So you can freely connect peripherals, transfer files or use headphones! This makes everyday computer use even more convenient, whether you are gaming, working or streaming.Solid construction and designThe case is made of high-quality SPCC steel with a thickness of 0.8 mm, which guarantees its durability and stability. In addition, tempered glass panels expose the interior, and the whole unit looks extremely modern - a solution that looks great on a gamer's desk and beyond.IncludedComputer caseFan x6 ManufacturerDarkflashModelF1Housing typeMidi TowerSide panelTempered glassMotherboard standardM-ATX, ITXSlots for internal drives3.5" HDD x3, 2.5" SSD x3Expansion card slots5Max PSU length200 mmMax length of graphics card350 mmMax height of CPU cooler200 mmMax number of fans9Fan mounting optionsSide: 120 mm x2; Rear: 120 mm x1/140 mm x1; Top: 120 mm x3/140 mm x2; Bottom: 120 mm x3;Water cooling mounting optionsTop: 360 mm / 280 mmNumber of fans installed6Type of fansARGBButtons and controlsPower, ResetConnectorsUSB-A 3.0 x2, USB-C x1, HD audioMaterial0.8 mm SPCCColorBlackHeight436 mmWidth240 mmDepth436 mm

Darkflash DY460 computer case (White) + 4 ARGB fansThe Darkflash DY460 case will allow you to build not only a powerful, but also a great-looking computer. It combines tempered glass panels with a vertical dual-chamber layout, so you can install many different components in it and display them in an interesting way. The model allows rear mounting of selected motherboards, provides space for heatsinks up to 360 mm, and has a built-in USB-C 3.2 Gen 2 port. The compact dimensions (452 x 238 x 541 mm) hide a spacious compartment that can accommodate a graphics card up to 400 mm long and CPU cooling up to 185 mm high. In addition, you'll find four ARGB fans included.Unprecedented cooling performanceThe case allows the installation of up to 10 120 mm fans, providing excellent airflow for the most demanding components. It is also possible to install a 360 mm heatsink on the top or 120/240 mm on the rear. Also noteworthy are the numerous ventilation holes. All this means that you can play AAA games or use demanding software without worry - your computer will not overheat. The kit includes four ARGB fans.Wide expansion possibilitiesBuild a computer perfectly suited to your needs. The Darkflash DY460 case allows you to install a graphics card up to 400 mm horizontally or up to 385 mm vertically (using optional mounting accessories, which are not included). You can also accommodate one SSD and two HDDs. In addition, back-connect mounting of ATX and M-ATX motherboards is possible, which simplifies cable management and improves the aesthetics of the entire setup.Useful portsThe built-in USB-C 3.2 Gen 2 port with up to 10 Gbit/s enables lightning-fast data transfers - useful for graphic designers, video editors, photographers and more. In addition, you'll find USB-A 3.0 and HD Audio connectors on the case, as well as Power and Reset buttons. This makes using the computer convenient and hassle-free!Delightful designTempered glass on three sides of the case provides a 330° panoramic view of the computer's interior, perfectly displaying selected components - such as those with RGB backlighting. Such a solution makes each configuration a real desktop ornament. What's more, the case was created from durable 0.8 mm thick SPCC steel and is effectively protected against dust - it will serve you well for many years.IncludedComputer caseFan x4 ManufacturerDarkflashModelDY460Housing typeBig TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x1Expansion card slots7Max graphics card lengthHorizontal mounting: 400 m; Vertical mounting: 385 mm;Max CPU cooling height185 mmMax number of fans10Fan mounting optionsSide: 120 mm x3; Rear: 120 mm x1; Top: 120 mm x3; Bottom: 120 mm x3;Water cooling mounting optionsTop: 360 mm; Rear: 120 mm / 140 mm;Number of fans installed4Type of fansARGBButtons and controlsPower, ResetConnectorsUSB-C 3.2 Gen 2 x1, USB-A 3.0 x1, HD audioMaterial0.8 mm SPCCColorWhiteHeight541 mmWidth238 mmDepth452 mm

DarkFlash DS900WD computer case (white)Darkflash DS900WD is an enclosure designed for users who want practical solutions. The tempered glass side panel and wooden front panel provide good visibility of components and give the whole case a distinct look. It allows the installation of motherboards in ATX, M-ATX and ITX formats, giving you great flexibility when building your computer. With its spacious design and multiple mounting options, it provides convenient kit assembly and good air circulation.Various cooling optionsThe DS900WD offers space to install 12 120 mm fans or 2 140 mm fans and water cooling at the top 360 mm or 240 mm, and at the front 240 mm. This allows you to build an effective cooling system for powerful configurations. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation.Thoughtful layout and ample spaceThe chassis will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. There are 7 PCI-E slots, allowing the kit to be expanded with additional expansion cards. For storage media, space is provided for two HDDs or one SSD and one HDD, so you won't run out of space for games and files.Built-in portsThe Darkflash DS900WD chassis is equipped with a set of the most commonly used ports that make everyday use of the computer easier. On the top panel you'll find one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), while 2 additional USB 2.0 ports are ideal for connecting a mouse, keyboard, headphones or other accessories. There is also an HD Audio connector for convenient connection of headphones and microphone.Refined detailsOn the right side of the case is a metal mesh, which not only provides adequate ventilation, but also blocks larger dust particles from entering the case. What's more, the top and bottom mesh panels also protect your equipment from debris, and their magnetic design makes them easy to install and remove.Durable construction and stylish designThe body of the case is made of 0.5 mm SPCC steel, which ensures high durability. The whole unit measures 470 x 218 x 454 mm and fits into standard under-desk spaces. The stylish design and the ability to illuminate the fans make the set look modern. ManufacturerDarkflashModelDS900WD ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installedNo fans installedType of fansnoneButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorWhiteHeight454 mmWidth218 mmDepth470 mm

Professional gaming PC case NOCTIS FLOW RGB X1 NOCTIS FLOW RGB X1 a case designed for maximum airflow During intense gameplay, temperature has a real impact on stability, FPS (Frames Per Second), and the overall performance of your computer.The mesh front panel (dense, breathable mesh) on the NOCTIS FLOW RGB X1 increases airflow, keeping components cool even under heavy load. Four RGB fans included full 4-pin PWM control The set includes four 120 mm RGB (Red Green Blue) fans they not only look modern but are highly functional.Thanks to 4-pin PWM (automatic speed control), the system increases fan speed exactly when your processor or graphics card starts working harder. Enhanced AIO cooling system installation wide compatibility In the NOCTIS FLOW RGB X1 you have complete freedom to install AIO (All in One) water cooling: on the top, front, rear, and most importantly in the dedicated side area next to the motherboard.This allows you to create a setup that best suits your graphics card, processor, and gaming style. NOCTIS FLOW RGB X1 offers extended radiator installation options, including space next to the motherboard. Supported configurations: top: 120 / 240 mm, front: 120 / 240 / 280 / 360 mm, next to the motherboard: 120 / 240 mm, rear: 120 mm. This flexible solution lets you tailor the cooling layout to your specific hardware configuration. Compatibility with large components no upgrade limitations The case supports CPU coolers up to 170 mm, graphics cards up to 350 mm, and power supplies up to 180 mm (or 230 mm after removing the HDD cage).This means you can choose exactly the GPU and cooling system that deliver top performance without worrying if everything will fit. Optimized airflow layout up to 10 fans NOCTIS FLOW RGB X1 lets you configure cooling to match your play style: maximum airflow, maximum silence, perfectly balanced. With 10 potential fan mounting spots, you get full control over your system temperatures. Available positions: 3 × front, 2 × top, 1 × rear, 2 × next to the motherboard, 2 × in the PSU chamber. This layout makes it easy to achieve the optimal balance between cooling and acoustics. Compatibility with ATX / mATX / Mini-ITX motherboards The case supports three popular motherboard standards: ATX (Advanced Technology eXtended) full-size, most expandable, mATX (Micro ATX) compact but still functional, Mini-ITX the smallest, ideal for mini gaming setups. Flexible drive system configuration tailored to the user Customize your storage setup to match your game library and workflow: more SSDs faster loading and system responsiveness, more HDDs more space for projects, recordings, or streamer archives. The choice is yours the case supports both options. NOCTIS FLOW RGB allows mounting: 2 × HDD 3.5 + 2 × SSD 2.5or 1 × HDD 3.5 + 3 × SSD 2.5. A practical solution for expanding storage space for games, video materials, or fast system drives. Case protected with filters and designed for clean airflow The case maintains high airflow while protecting components with two dust filters (top + bottom), helping extend component longevity. The mesh front panel is complemented by additional dust filters: top, PSU chamber. As a result, the inside of the PC stays clean and components remain stable over time. Ergonomic I/O panel quick access to essential ports The top panel includes: USB-A 3.1 Gen 1 (Universal Serial Bus Type A, 3.1 Gen 1 standard) 2 × USB-A 2.0 HD Audio (High Definition Audio) The ports are easily accessible, making it convenient to connect flash drives, accessories, or headphones without reaching behind the PC. NOCTIS FLOW RGB X1 a case for users who need efficient cooling and full functionality A solid, well-designed structure with high airflow, broad compatibility, and a modern ventilation layout.An ideal choice for gaming PCs, streaming setups, and powerful workstations.

Professional gaming PC case NOCTIS GLASS RGB X1 NOCTIS GLASS RGB X1 a case that combines gaming style with stable performance NOCTIS GLASS RGB X1 is a case designed for gamers who value not only high functionality but also impressive, modern aesthetics.The front panel made entirely of tempered glass highlights the RGB (Red Green Blue) lighting of the fans and creates a minimalist, clean design. Four RGB fans included full 4-pin PWM control The set includes four 120 mm RGB (Red Green Blue) fans they not only look modern but are also highly functional.Thanks to 4-pin PWM (automatic speed control), the system increases fan speed exactly when your processor or graphics card starts working harder. Enhanced AIO cooling system installation wide compatibility In NOCTIS GLASS RGB X1 you have complete freedom to install AIO (All in One) water cooling: on the top, front, rear, and most importantly in the dedicated zone next to the motherboard.This allows you to prepare a setup that best suits your graphics card, processor, and gaming style. NOCTIS GLASS RGB X1 offers extended radiator installation options, including space next to the motherboard. Supported configurations: top: 120 / 240 mm front: 120 / 240 / 280 / 360 mm next to the motherboard: 120 / 240 mm rear: 120 mm This flexible solution lets you tailor the cooling system to your specific hardware configuration. Compatibility with large components no upgrade limitations The case supports CPU coolers up to 170 mm, graphics cards up to 350 mm, and power supplies up to 180 mm (or 230 mm after removing the HDD cage).This means you can choose exactly the GPU and cooling system that delivers the best performance without worrying about fitting issues. Optimized airflow layout up to 10 fans NOCTIS GLASS RGB X1 allows you to configure cooling that fits your style of gameplay: maximum airflow maximum silence perfectly balanced operation With up to 10 fan mounting spots, you have full control over your temperature management. Available positions: 3 × front 2 × top 1 × rear 2 × next to the motherboard 2 × in the PSU chamber This layout makes it easy to achieve the perfect balance between cooling efficiency and acoustic comfort. Compatibility with ATX / mATX / Mini-ITX motherboards The case supports three popular motherboard formats: ATX (Advanced Technology eXtended) full-size, most expandable mATX (Micro ATX) compact but still highly functional Mini-ITX smallest, ideal for compact gaming builds Flexible drive system configuration tailored to the user Adapt your storage configuration to your game library and workflow: more SSDs faster load times and system responsiveness more HDDs more space for projects, recordings, or streaming archives The choice is yours the case supports both setups. NOCTIS GLASS RGB allows installing: 2 × HDD 3.5 + 2 × SSD 2.5or 1 × HDD 3.5 + 3 × SSD 2.5 A practical solution to expand storage for games, video materials, or fast system drives. Case protected with filters and designed for clean airflow The case maintains high airflow while protecting components with two dust filters (top + bottom), helping extend the lifespan of your hardware. The tempered-glass front panel is complemented by additional dust filters: top PSU chamber As a result, the inside of your PC stays clean, and components run longer and more reliably. Ergonomic I/O panel quick access to essential ports The top panel includes: USB-A 3.1 Gen 1 2 × USB-A 2.0 HD Audio The ports are easily accessible, making it convenient to connect USB drives, accessories, or headphones without reaching behind the computer.

Darkflash M305 fanless computer case (Black)Darkflash M305 is a meticulously designed Micro-ATX computer case that combines compact dimensions with functionality and futuristic design. It was created for users looking for good value for money, without compromising on airflow, hardware compatibility and aesthetics. A transparent side panel made of tempered glass allows you to effectively display your components, which is sure to be appreciated by fans of RGB backlighting (Red, Green, Blue, a backlighting system based on three colors: red, green and blue) or elegant kits. From now on, your gaming space will look classy and stylish!Practical solutions for everyday useThe case is equipped with a side panel made of tempered glass, fixed with convenient thumb screws. This gives you quick and easy access to the computer's interior, without the need to reach for tools. This solution works great for both hardware upgrades and regular cleaning of the cooling system. The front of the case has a modern, openwork panel with vents, which not only gives the whole case a dynamic character, but most importantly helps air circulation, protecting components from overheating.Efficient cooling systemDarkflash M305 offers a lot of freedom when planning cooling - you can fit as many as 7 120 mm fans inside. Such an arrangement allows you to build a very efficient air cooling system, which translates into stable operation of the processor, graphics card and other components, even during intensive gaming or work on graphics programs. The layout of the fans can be customized to ensure even airflow throughout the case.Compact format, big possibilitiesAlthough the case has small external dimensions (325 × 195 × 387 mm), its interior has been designed for maximum space utilization. It will easily accommodate a graphics card up to 300 mm in length and a CPU (Central Processing Unit, CPU) cooling system up to 160 mm in height. The case supports M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than the standard ATX) and ITX (Information Technology eXtended, an ultra-compact motherboard format) motherboards, allowing you to choose the right configuration for both an office and gaming PC.Thoughtful interior and space for dataInside you'll find a specially designed mounting bracket that allows you to install two SSDs (Solid State Drive, solid state drive) and two traditional HDDs (Hard Disk Drive, hard drive). This arrangement gives you a lot of flexibility in scheduling your operating system, games and data storage. The entire interior has been designed with order in mind - cables can be routed aesthetically, which promotes both appearance and better cooling.Quick access to portsOn the top edge of the case is an intuitive panel of inputs and outputs, including an advanced USB 3.0 connector (Universal Serial Bus, a connector standard for powering and charging electronic devices, as well as for data transfer). It allows fast file transfer and convenient charging of mobile devices. The top location of the ports makes it convenient to use them no matter where the computer stands - on or under the desk.Includedmotherboard screws x12hard drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelM305Housing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPSU standardM-ATX, bottom mountSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots4Max PSU length160 mmMax length of graphics card300 mmMax height of CPU cooler160 mmMax number of fans7Fan mounting optionsRear: 120 mm x1; Top: 120 mm x2; Front: 120 mm x2; Bottom: 120 mm x2Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.45 mm SPCCColorBlackHeight387 mmWidth195 mmDepth325 mm

PC case Volcano Space XL ARGB Full Tower 5 fans, white Youre investing in a top-tier processor, a powerful graphics card, fast RAM, and a solid motherboard, so why would you hide them from yourself and other household members? The MODECOM Volcano Space XL Full Tower is a case designed so that your computer can finally look truly impressive. The front and side tempered-glass panels create a full visual showcaselike hardware displayed in a glass cabinet. Every detail, every ARGB effect (if you install illuminated fans), and every line of your configuration is visible and highlighted by this majestic chassis. MODECOM Volcano Space XL was designed for those who love personalization and perfect internal cable management, while also needing a spacious Full Tower case. Support for motherboards with reversed connectors allows you to build a modern interior without having to expose cables. Thanks to snap-on panels, you gain quick access to the inside. Installing components, upgrading hardware, and cleaning the interior become even easier. The spacious interior gives you full freedom: large E-ATX boards, robust water cooling (up to 420 mm), long graphics cards, and all the components you need for your gaming setup. With the MODECOM Volcano Space XL, your computer will know no limitsand it will look exactly the way it deserves. If you love technology, need plenty of room for expansion, and want your hardware always within sight, the MODECOM Volcano Space XL Full Tower is made for you. Especially in the Volcano Space XL NF version, which gives you complete freedom to configure cooling according to your preferences, as it comes without pre-installed fans. Because bigger can do more. 5 x 140 ARGB RIGHT FROM THE START The right operating temperature is the key to longevity and cool performance of any computer. The MODECOM Volcano Space XL was designed to ensure that your components always work in optimal conditions. As standard, you get five high-performance ARGB fans: three 140 mm fans on the side panel (in a reversed layout) and two 140 mm fans at the back of the case. This setup provides efficient airflow that effectively cools the processor and graphics card, even during intense and long gaming sessions. If you need even more cooling options, the MODECOM Volcano Space XL gives you full freedom to expand. On the top panel, you can install an additional three 120 mm fans, and in the bottom section up to three 120 or 140 mm fans. Additionally, near the PSU shroud, there is space for two more 120 or 140 mm fans if you are not using a top-mounted water-cooling system. More fans mean more stable temperatures and higher performance - and for advanced components, its a necessity.

Limited hololive edition, panorama glass with Suisei design, vertical GPU with PCIe 4.0 riser, powerful cooling, dual-chamber construction The HYTE Y70 Suisei Edition is a limited showcase case for fans of hololive V-Tuber Suisei and discerning PC enthusiasts. It combines the renowned Y70 design with exclusive Suisei graphics, high-quality materials, and maximum hardware compatibility. Limited Suisei Edition featuring Hoshimachi Suisei design and collector’s value Three-piece panoramic glass wonderfully displays hardware and graphics cards Vertical GPU mounting with PCIe 4.0 riser for a clean look and optimal presentation Dual-chamber interior separates hardware and cables for improved airflow Extensive cooling options for both air and water cooling, suitable even for high-end systems Limited design for hololive fans The Suisei Edition brings detailed character graphics and an elegant midnight blue design to the Y70 case. Gold accents and lettering highlight the nocturnal aesthetic. The panoramic glass makes the case a centerpiece of any desk or setup. Plenty of space for powerful hardware The Y70 supports motherboards up to E-ATX and can accommodate graphics cards up to 422 mm in length. With 4-slot GPU support, there is also room for especially large graphics cards. CPU coolers up to 180 mm and power supplies up to 235 mm fit easily inside the case. Strong cooling and thoughtful design Up to ten fans or multiple 360 mm radiators ensure efficient cooling. The dual-chamber design simplifies cable management and keeps the showcase area neat. Tool-less panels and modular mounts make assembly and maintenance especially convenient.

mATX- ja Mini-ITX-tugi • Sisaldab 4 ventilaatorit, kuni 9 ventilaatori kohta • 4 mm klaaspaneelid, 270° vaade • Hea kaablihaldus, back-connect ühilduv • Mahutab 41,5 cm GPU ja mitu SSD/HDD ketast

Das SK6 ARGB ist die ideale Wahl für alle, die auf eine moderne Glasoptik und leistungsfähige Belüftung setzen. Drei vorinstallierte adressierbare PWM-Lüfter – davon zwei mit seitlichem Lufteinzug – sorgen nicht nur für eine eindrucksvolle Beleuchtung, sondern auch für eine ausgewogene Kühlung trotz Glas. Das stylische ATX-Gehäuse bringt dabei neben einem großzügigen Innenraum für die neueste Hardware auch Kompatibilität zu modernen BTF-Mainboards mit. Optisch setzt das SK6 ARGB voll auf die Präsentation deiner Hardware: Front- und Seitenteil bestehen aus gehärtetem Glas und verbinden sich fast nahtlos zu einem modernen, hochwertigen Look. Ab Werk bringt das SK6 ARGB drei 120-mm-RGB-PWM-Lüfter mit – zwei davon sind invertiert und ziehen Frischluft effizient über die Seite ins Gehäuse. Wer noch mehr Kühlleistung braucht, kann das System auf bis zu neun Lüfter erweitern. Für Nutzer, die auf Flüssigkühlung setzen, bietet das SK6 ARGB Platz für einen 360-mm-Radiator sowie die Möglichkeit, zusätzlich einen zweiten Radiator mit bis zu 280 mm einzubauen. Neben klassischen Mini-ITX-, Micro-ATX- und ATX-Mainboards unterstützt das Gehäuse auch nahezu alle gängigen BTF-Mainboard-Layouts und bietet damit maximale Anpassung beim Hardware-Aufbau. Peripheriegeräte, Wechseldatenträger und Headsets können bequem an der Seite des SK6 ARGB mittels zweier USB-A-Anschlüsse sowie eines TRRS-Anschlusses genutzt werden. Auch bei großen Komponenten bleibt es im SK6 ARGB luftig: Grafikkarten mit bis zu 410 mm Länge finden problemlos Platz, zudem lassen sich CPU-Kühler mit bis zu 170 mm Höhe sowie Netzteile mit bis zu 235 mm Länge installieren. Für Speicherlösungen stehen Plätze für zwei 3,5“-HDDs oder vier 2,5“-SSDs zur Verfügung.

With the TRYX FLOVA F50, you can build your perfect gaming PC. The midi-tower combines a sleek, modern design with thoughtful airflow. Whether you're creating a gaming PC, a creator workstation, or a powerful all-rounder, the FLOVA F50 provides the ideal foundation. Quiet operation: Optimized cooling system ensures low noise levels Outstanding airflow: Special cross-flow fan concept for excellent cooling Ample space for hardware: Graphics cards up to 420 mm in length Radiator support: Up to 360 mm space for AiO water cooling Well-equipped I/O panel: USB-C 3.2 on the side TRYX FLOVA F50: Midi-tower with stylish design TRYX FLOVA F50 Pink front view The FLOVA F50 has a clean and understated look. The front and side elements feature a fabric finish, giving it a cozy and minimalist appearance while ensuring plenty of fresh air inside. This case fits seamlessly into your gaming room, office, or living room. Powerful airflow with clever air circulation TRYX FLOVA F50 interior with fans Inside, the TRYX Cross-Flow System (TCF) provides a strong supply of fresh air. The fans direct air at a 90-degree angle through the case, efficiently cooling your graphics card and CPU. At the same time, your gaming system stays pleasantly quiet—around 20 dB(A) at 1,100 rpm. This means you get strong cooling without having your PC constantly audible during every task. Plenty of space for modern high-end hardware You can install even large components in the FLOVA F50. Graphics cards up to 420 mm long fit easily. Air coolers can be up to 170 mm high. For water cooling, the FLOVA F50 supports radiators up to 360 mm. Ready for current motherboard generations Supports ATX motherboards Compatible with back-connect designs (BTF / Project Zero) Clean cable management Tool-free assembly in many areas Especially with motherboards featuring rear connectors, you benefit from a particularly tidy interior. Cables disappear from view, giving your build a much cleaner look. I/O panel with USB-C On the side, you'll find an I/O panel with USB-C 3.2, allowing you to easily connect fast external devices without having to reach to the back of your case. It's easily accessible and matches the sleek overall concept of the case. Ideal for gaming, creative work, and quiet setups TRYX FLOVA F50 Pink in a setup Whether you’re planning a quiet creator PC or a powerful gaming machine, the TRYX FLOVA F50 gives you a case that reliably dissipates your components’ heat without being overly loud. It’s the perfect choice if you value quiet operation, strong airflow, and a subtle yet high-quality design. It doesn’t seek attention but impresses with its thoughtful details.

With the TRYX FLOVA F50, you can build your perfect gaming PC. This midi tower combines a calm, modern design with well-thought-out airflow. Whether it's a gaming PC, creator workstation, or powerful all-rounder, the FLOVA F50 gives you the right foundation. Quiet operation: Optimized cooling system ensures low noise levels Outstanding airflow: Special cross-flow fan concept for effective cooling Plenty of room for hardware: Graphics cards up to 420 mm long Radiator support: Space for AiO liquid coolers up to 360 mm Well-equipped I/O panel: USB-C 3.2 on the side TRYX FLOVA F50: Midi tower with stylish design TRYX FLOVA F50 Black front view The FLOVA F50 looks clean and understated. The front and side elements feature a fabric finish. This gives it a homely, minimalist look while also ensuring enough fresh air inside. That means the case fits not only in your gaming room, but also in your office or living room. Powerful airflow with clever air routing TRYX FLOVA F50 interior Inside, the TRYX Cross-Flow System (TCF) provides a strong supply of fresh air. The fans direct the air through the case at a 90-degree angle. This delivers fresh air directly to your graphics card and CPU. At the same time, your gaming system stays pleasantly quiet, at around 20 dB(A) at 1,100 rpm. So you get strong cooling without your PC being constantly audible during every task. Plenty of room for modern high-end hardware The FLOVA F50 can also accommodate large components. Graphics cards up to 420 mm long fit without problems. Air coolers can be up to 170 mm high. For liquid cooling, the FLOVA F50 supports radiators up to 360 mm. Ready for current motherboard generations Supports ATX motherboards Compatible with back-connect designs (BTF / Project Zero) Clean cable management Tool-free installation in many areas Especially with motherboards that have rear-side connectors, you benefit from a particularly tidy interior. Cables disappear from view and your build looks much cleaner. I/O panel with USB-C On the side, you'll find an I/O panel with USB-C 3.2. This lets you connect fast external devices without having to reach around to the back of your case. It is easy to access and fits the case's clean overall concept. Ideal for gaming, creative work, and quiet setups TRYX FLOVA F50 right side Whether you're planning a quiet creator PC or a powerful gaming machine, the TRYX FLOVA F50 gives you a case that reliably dissipates the heat from your components without becoming excessively loud. It is the perfect choice for you if you value quiet operation, strong airflow, and a subtle, high-quality design. It doesn't demand attention, but it impresses in the details.

With the S25-W2 ARGB, powerful hardware is specifically showcased: ARGB lighting, a side panel made of tempered glass and pre-installed PWM fans create the basis for impressive setups. Support for 360 millimeter radiators, an external 5.25-inch installation bay and modern connections such as USB Type-C ensure high flexibility and contemporary features. The S25-W2 combines ARGB lighting with a side panel made of tempered glass to make the installed hardware optimally visible. Using the integrated 2-port ARGB controller, compatible LEDs can be easily controlled and individual lighting effects can be created, allowing the system to be visually adapted. A pre-installed 120 millimeter ARGB PWM fan on the back and a 120 millimeter PWM fan on the front ensure balanced air circulation. A total of up to seven fans can be installed. In addition, the housing supports the installation of a 360 millimeter radiator and thus also offers suitable cooling options for high-performance systems. With an external 5.25-inch bay on the front, the case offers a convenient expansion option for compatible drives or accessories. This means the system remains flexible and can continue to integrate classic components. The I/O panel is equipped with a USB Type-C port and two USB 3.0 ports and enables quick access to the latest peripheral devices. A magnetic dust filter on the top protects the system from dirt and can be easily removed for cleaning. This means that the installed hardware remains efficient and maintained in the long term. The S25-W2 offers installation options for up to two 3.5-inch or four 2.5-inch drives. Graphics cards with a length of up to 38 centimeters, CPU coolers with a height of up to 17.2 centimeters and power supplies with a length of up to 22 centimeters can be easily integrated. Tower case type Color black EAN 4044951045709 Made in China S25 series Midi tower design Motherboard form factor E-ATX Material tempered glass, steel Window Kit Yes Internal dimensions plug-in card length maximum 380 mm Internal dimensions CPU cooler height maximum 172 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 220 mm Drive bays 5.25 inch external Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Front 1 x 120mm PWM fan pre-installed Back 1 x 120 mm ARGB-PWM fan pre-installed Notes Magnetic dust filter: top, cable management system, quick-release fasteners, top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed Lighting Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Water cooling possible Supported radiators Top: 120/140/240/280/360 mm, back: 120 mm Rear connection of the mainboard No Note Install the 360mm radiator on either top or front Accessories available accessory set Volume 49 l Dimensions Width: 22 cm x Height: 48.8 cm x Depth/Length: 46 cm Weight 7.3kg

The S25 Silent is aimed at users who place particular value on quiet operation: Four integrated insulation mats effectively reduce noise, while pre-installed PWM fans and flexible cooling options ensure reliable performance. The housing is complemented by an external 5.25-inch installation bay, modern connections and practical dust protection solutions. The S25 Silent is equipped all around with four insulation mats that effectively reduce noise during operation. This makes the case particularly suitable for quiet work or gaming systems without having to forego flexibility and performance. The case is equipped with two pre-installed 120 millimeter PWM fans that ensure reliable air circulation. A total of up to seven fans can be installed. In addition, the S25 Silent supports the installation of a 360 millimeter radiator and therefore also offers suitable cooling options for high-performance systems. With an external 5.25-inch bay on the front, the case offers a convenient expansion option for compatible drives or accessories. This means the system remains flexible and can continue to integrate classic components. The I/O panel is equipped with a USB Type-C port and two USB 3.0 ports and enables quick access to the latest peripheral devices. A magnetic dust filter on the top protects the system from dirt and can be easily removed for cleaning. This means that the installed hardware remains efficient and maintained in the long term. The S25 Silent offers installation options for up to two 3.5-inch or four 2.5-inch drives. Graphics cards with a length of up to 38 centimeters, CPU coolers with a height of up to 17.2 centimeters and power supplies with a length of up to 22 centimeters can be easily integrated. Tower case type Color black EAN 4044951046065 Made in China S25 series Midi tower design Motherboard form factor E-ATX Material metal Internal dimensions plug-in card length maximum 380 mm Internal dimensions CPU cooler height maximum 172 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 220 mm Drive bays 5.25 inch external Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Front 1 x 120mm PWM fan pre-installed Rear 1 x 120mm PWM fan pre-installed Notes Magnetic dust filter: top, cable management system, quick-release fasteners, top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed Water cooling possible Yes Water cooling possible Supported radiators Top: 120/140/240/280/360 mm, back: 120 mm Rear connection of the mainboard No Housing insulated Yes Note Install the 360mm radiator on either top or front Accessories available accessory set Volume 49 l Dimensions Width: 22 cm x Height: 48.8 cm x Depth/Length: 46 cm Weight 8kg

Compact ATX mid-tower with tempered glass, integrated 7-inch LCD, targeted cooling from below and the side, 360mm radiator support Do you want to not only showcase your hardware but also give your build a personal touch? The Phanteks XT V5 LCD combines a tempered glass side panel with a built-in 7-inch display. You can use it to show system information or your own images, while the fan layout at the bottom and side supplies fresh air to your gaming hardware. Integrated 7-inch LCD: For system information and custom content Showcase design: Tempered glass reveals your hardware Targeted cooling: Fan positions at the bottom and side For larger water cooling setups: Supports radiators up to 360 mm Lighting included: Pre-installed RGB fans Flexible hardware compatibility: For ATX, Micro-ATX, and Mini-ITX The 7-inch LCD makes your build more personal The integrated display gives your PC a special visual highlight. You can display system values or your own images and graphics on it, designing the case to match your setup. Combined with the tempered glass side panel, this creates a build where both the installed components and the display are part of the overall look. Important system values at a glance You can show system information on the integrated LCD. This way, you don’t have to keep an additional program open on your monitor to check important values constantly. Clear view of hardware and lighting The tempered glass side panel keeps your graphics card, motherboard, RAM, and RGB lighting visible. The display complements this showcase look without overshadowing the actual hardware. The black case provides a subtle frame and gives you plenty of freedom when choosing your components and lighting. Fresh air from below and the side The possible fans at the bottom and side direct cool air straight to the central components. The graphics card especially benefits from the airflow coming from the lower section. Pre-installed RGB fans support air exchange while adding visible light accents behind the glass panel. Design and cooling intelligently combined While the LCD and glass panel showcase your build, the ventilation directed at the bottom and side supplies fresh air to the graphics card, motherboard, and CPU cooling. Space for a 360 mm radiator For cooling your processor, the Phanteks XT V5 LCD supports a radiator up to 360 mm. This allows you to integrate a larger water cooling setup into your build. Additional fans give you the option to adjust airflow to your hardware and desired noise level. Spacious interior for your gaming PC The case supports ATX, Micro-ATX, and Mini-ITX motherboards as well as current graphics cards, powerful processors, and full-sized power supplies. Separate slots for SSDs and HDDs provide space for games, programs, and personal data. Cable routing holes and mounting points help you manage cables behind the motherboard tray, keeping the visible area tidy.

FULL ATX 3X14CM FANS NOISE ABSOR A new Full-ATX Case with aluminum front panel and great airflow, silence and plenty of space for a whole lot of HDD's and opticals...

GAMING MIDI TOWER W/O PSU 2x USB 2.0 1x USB 3.0 Mic-in Audio-out

CHIEFTEC LIBRA LG-01B GAMING MIDI TOWER

Mini tower, USB 3.0 x2, USB 2.0 x2, black w/o PSU, microATX

The introduction of Grandia GD07 and GD08 cases from SilverStone ushers in a new era of home theater computing like never before. For the first time, the power and storage capacity of a server can now be neatly stowed beautifully and quietly in a home theater environment. Completely reengineered to fully utilize all available spaces, the Grandia GD07 can accommodate an incredible amount of drives (up to eleven) and high-end components (graphics cards up to 13.6 inches long) with minimal sacrifices. It is even possible to fit SSI EEB (12” x 13”) extended ATX motherboards in the GD07 despite maintaining an exterior dimension similar to SilverStone’s previous generation full-size HTPC cases.With a wealth of lessons learned from building the best performing tower cases in the last several years, SilverStone engineers upgraded GD07’s cooling performance tremendously with up to four 120mm fan options. And to make sure owners can easily maintain their cases’ cooling ability over time with the lowest noise possible, custom designed removable filters surround the case for positive pressure to work effectively and quietly.Built to hide the imperfection of I/O ports and the plethora of drives that may be installed in its four 5.25” drive bays, the GD07’s lockable aluminum front door is beautifully finished with hairline brush pattern to match other home theater components. For those looking to build a powerful home media sever with security Featuress, this is the perfect case.SPECIAL FeaturesS- Positive air pressure design for excellent cooling/quietness and dust-prevention- Support expansion cards up to 13.6 inches- Supports Extended ATX motherboard- Quick access filters to prevent dust buildup- Lockable front door and power button ensure security of system and drives- LED indicator with adjustable brightness- Impressive storage capacity of up to eleven drive baysFormat E-ATXMaximum CPU-Cooler Height 138 mmSpecial Featuress USB 3.0; ein 120-mm-Fan (18 dBA) im Seitenteil included, ein weiterer 120-mm-Fan einba

External 2x 5.25 ", 1x 3.5", Internal 2x 3.5 ", 1x 2.5", Front I / O 2x USB-A 3.0, 2x USB-A 2.0, 1x headphone, 1x microphone, PCI slots 7, Fan (front) 1x 120mm (optional), Fan (rear) 1x 120mm (optional), Mainboard to μATX, Supported Motherboards Mini-ITX (6.7 "x6.7") / μATX (9.6 "x9.6"), PSU ATX, Power supply position above, CPU cooler up to max. 140mm height, Graphic cards up to max. 340mm, Color: Black, Dimensions (WxHxD) 180x352x425mm (+ 3mm for feet), volume 26.93l, weight 4.96kg, CT-04B-350GPB

AeroCool korpus ATX RIFT RGB - 1x120mm must FAN

Aerocool Cylon Mini. Kujutegur: Minitorn, Tüüp: PC, Toote värv: Must. Installitud esiventilaatorid: 2x 120 mm, Toetatud esiventilaatorite läbimõõt: 120 mm, Installitud tagaventilaatorid: 1x 80 mm. Toetatud kõvakettasuurused: ...

Inter-Tech korpus SC-2100 must Mini ITX | Storage-korpus

Inter-Tech korpus A80S must ITX

Dimensions: 202 x 438 x 384 mm (W x H x D) Material: steel, acrylic glass, plastic Weight: 3.2 kg Color: Black Form factor: ATX, Micro-ATX, Mini-ITX Fan possible: 3x 120 mm (front) 1x 120 mm (rear) 2x 120 mm (cover) 2x 120 mm (bottom) Fan pre-installed: 1x 120 mm (front) 1x 120 mm (rear) Drives: 2x 3.5 / 2.5 inches (internal) 4x 2.5 inches (internal) Power supply (optional): standard ATX Expansion slots: 7 I / O panel: 1x USB 3.0 2x USB 2.0 1x per audio in / out Maximum graphics card length: 305 mm Maximum power supply length: 150 mm Maximum CPU cooler height: 160 mm

T-11 Televen, ATX/µATX/ITX, 2x 3.5&quot , 2x 2.5&quot , 2x 3.5&quot , USB 3.0, 2x USB 2.0, 425x200x390 mm

Internal 2x 3.5 ", 2x 2.5", Front I / O 1x USB-A 3.0, 2x USB-A 2.0, 1x microphone, 1x headphone, PCI slots 4, Fan (front) 2x 140mm (optional), Fan (rear) 1x 120mm, 1000rpm, 16dB (A), Fan (top) 1x 140mm (optional), Radiator sizes 120/140/240 / 280mm in front, 120mm in back, Mainboard up to MicroATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.220mm deep), PSU position below, CPU cooler max. 155mm height, Graphics cards max. 350mm, Color black, inside black, Lighting without lighting, Dimensions (WxHxD) 208x440x398mm, Volume 36.42l, Weight 5.45kg, Housing type minitower, Special features Cable management, dust filter, window made of glass, w/o psu, CA-1R1-00S1WN-00

ATX, mATX, Mini-ITX, MidiTower, steel, w/o PSU, 3xUSB on the front panel, 204x479x445 mm, 4.7 kg

Internal 1x 3.5 "(transverse, drive rails), 1x 2.5" /3.5 ", 2x 2.5", Front I / O 2x USB-A 3.0, 1x USB-A 2.0, 1x microphone, 1x headphones, PCI slots 7, Fan (front) 2x 160mm (optional) or 3x 120mm (optional), Fan (rear) 1x 120mm (RGB illuminated), Fan (top) 2x 120mm (optional), Fan (other) 2x 120mm (optional), Radiator sizes 120/240 / 360mm front, 120mm rear, Mainboard to ATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6"), Power supply ATX (max.192mm deep), PSU position below, CPU cooler max. 157mm height, Graphics cards max. 317mm, Color black, inside black, Lighting illuminated fan, Dimensions (WxHxD) 206x457x380mm, Volume 35.77l, Enclosure type miditower, Special features Cable management, dust filter, window made of glass, w/o psu, AEROPGS-HIVE-G-BK-V3

DIMENSIONS : (D)420mm X (W)269.5mm X (H)380mm MOTHERBOARD : E-ATX (Max 280 mm wide)/ATX/ Micro-ATX/ Mini-ITX PSU : SFX/ SFX-L MATERIAL : Steel 4 mm Tempered Glass 2mm Aluminum (top and left panel) FAN SUPPORT : Top: 3x 120mm or 2x 140mm Side: 2x 120mm or 2x 140mm Bottom: 3x 120mm or 2x 140mm Rear: 1x 120mm RADIATOR SUPPORT : Top: 360mm or 280mm or 240mm radiator Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator GPU LENGTH CLEARANCE : 395mm CPU COOLER HEIGHT CLEARANCE : 170mm VGA Length : 370mm DRIVES : Right side 2 x 2.5″ SSD + back plate 2 x 3.5″ HDD (or SSD) EXPANSION SLOTS : 3 or 5 or 7 slots (depends on back panel) IO PORTS : 2 x USB 3.0, 1 x USB 3.1 TYPE-C, 1 x HD Audio, Power Button DUST FILTERS : 1 x Top, 1 x Bottom, 2 x Side

Cabinet Form Factor: Micro Torn Mainboard Form Factor1sisseehitatud Devices: LED Indicator Power Button Supported Mainboard Form Factor15.25-inch External Drivesahtleid: 12.5-inch Internal Drivesahtleid: 3 Maksimum Fans toetatud Quantity1(USB 3.0 (type A)) USB 2.0: 1(USB 2.0 (type A)) mikrofon-In: 1(3.5-mm minijack) Headphones: 1(3.5-mm minijack) Power seadme tüüp: toiteplokk Optional CPU Cooler Maksimum kõrgus140 mm Expansion Card Max pikkus: 290 mm kaasastarvikud180 mm Nominal kaal: 2.22 kg garantii Products Returnable1Box kaal Brutto (kg): 2.72 kg Retail Packaging Netokaal Carton1EAN Code: 4260455645881

Inter-Tech korpus B-02 RGB must ATX | 88881330