Elegant black midi-tower, discreet design made of aluminum and steel, tempered glass side panel, for E-ATX motherboards (max. 305 x 285 mm), space for a maximum 360mm radiator in the top, graphics cards up to 330 mm, 4x 2.5-inch or 2x 2.5/3.5-inch data carriers.
XPG INVADER X. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Placering af strømforsyning: Bund. Understøttede diametre for sideventilatorer: 120 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 245 mm, Dybde: 475 mm, Højde: 448 mm
XPG BATTLECRUISER II ST. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Frontventiler installeret: 3x 120 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 506 mm, Højde: 550 mm. Pakkebredde: 339 mm, Pakkedybde: 643 mm, Pakkehøjde: 615 mm
• USB 3.2 Gen 1x1 - USB-A • For two 8,89cm/3,5" SATA hard disk drives • RAID feature (0 / 1 / Large / Normal) • UASP support (Win 8 or higher) • Aluminium body • Fan controller • Chipset for SATA 5 Gb/s (SATA I/II/III) - • Plug‘n‘Play • Nominal data transfer rate: up to 5 Gb/s
The chassis stand for the Tower 600 Light-year Green includes a base cover for the case and a display stand. It allows users to set up their Tower 600 Light-year Green horizontally, making it easy to customize the case and create a unique experience. A dust filter is also attached to the base plate to provide protection against dust. The chassis stand comes with rubber pads to prevent scratching the chassis during installation. The abrasion-resistant material ensures long-lasting protection without affecting the finish of the tower. The small raised sections of the anti-slip design are strategically placed to provide secure grip and prevent unwanted slipping during use.
PC case Volcano AQ200 ARGB MIDI BLACK The MODECOM Volcano AQ200 ARGB MIDI is a representative of the Volcano AQ case series, characterized by an eye-catching design with rounded shapes of the front panel made of tempered glass, support for motherboards with reversed connectors, four 120 mm ARGB fans included as standard along with an ARGB lighting controller, and support for water cooling radiators up to 420 mm, as well as numerous perforations on the panels to ensure efficient cooling of the computer. A distinctive feature of the AQ200 version is the LED display, which allows monitoring the temperature and workload of the processor, graphics card, and RAM memory. All these advantages are complemented by two USB 3.0 ports and one USB-C port (USB 3.2 Gen 2) located on the side panel. This is a case designed to showcase components and give full control over monitoring their performance.
The Jonsbo N6 is a compact yet highly functional NAS case for power users, data enthusiasts, and home server fans. It combines a well-thought-out layout, strong drive support, and effective cooling options in a minimalist steel case. Supports up to 9 × 2.5" or 3.5" drives – ideal for NAS or data storage ITX & M-ATX compatible – for flexible system configurations Dual-PSU mode – supports ATX and SFX power supplies up to 220 mm Up to 10 fans and 240 mm AIO supported – efficient cooling guaranteed Integrated 3-stage fan controller – easy control of noise levels Perfect for data-intensive setups With space for up to nine drives, the N6 is ideal for NAS, media servers, or as local backup storage. The well-thought-out drive placement ensures quick accessibility and efficient use of the interior space. Compact, powerful, and versatile Whether Mini-ITX or Micro-ATX – the N6 offers space for modern systems including GPUs up to 320 mm and CPU coolers up to 160 mm. Support for two power supply sizes increases flexibility in power delivery. Efficient ventilation & clever extras Up to eight 120 or 140 mm fans can be installed in the case. The integrated 3-port/3-stage fan controller allows you to run the cooling system quietly or at high performance depending on your needs – ideal for continuous operation.
Clear lines, strong cooling, uncompromising look: With the Steel Shark, Sharkoon presents a stylish two-chamber ATX case that combines modern design with a particularly tidy look. Tempered glass on the front and side, four pre-installed ARGB PWM fans as well as extensive cooling options and BTF support make the Steel Shark the ideal basis for powerful and visually impressive gaming systems. Thanks to the well-thought-out two-chamber design, the Steel Shark clearly separates hardware and power supply including cable management. This creates an extra tidy look in the main area, while cables, drives and power supply can be discreetly stored at the back. The front and side panels of the Steel Shark are made of tempered glass and provide a clear view of the built-in hardware and the integrated lighting. This makes the case perfect for users who want to present their system not only powerfully, but also visually impressively. The Steel Shark is equipped with four 120 mm ARGB PWM fans ex works. These not only ensure an effective airflow, but also skillfully showcase the system visually. A practical ARGB control and a PWM fan hub with five positions are included! A total of up to eleven fans can be installed in the Steel Shark. In addition, the housing supports the simultaneous installation of two radiators and is therefore also aimed at water cooling enthusiasts who want to cool their system particularly efficiently and quietly. In addition to classic ATX motherboards, the Steel Shark also supports models with a BTF design. The rear connection technology further optimizes cable management and further underlines the clean look of the system. The Steel Shark is also flexible when it comes to selecting powerful hardware: It supports graphics cards with a length of up to 424 mm, CPU coolers with a height of up to 168 mm and power supplies with a length of up to 244 mm. Tower case type Color black EAN 4044951044924 Made in China Midi tower design Motherboard form factor ATX Tempered glass material Window Kit Yes Internal dimensions Plug-in card length maximum 424 mm Internal dimensions CPU cooler height maximum 168 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 244 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Front 3 x 120 mm ARGB-PWM fans pre-installed Back 1 x 120 mm ARGB-PWM fan pre-installed Notes Cable management system, graphics card holder, top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed Lighting Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Water cooling possible Supported radiators Front: 360 mm, Top: 360/280 mm Rear connection of the motherboard Yes Note If the graphics card is longer than 270 mm, there may be conflicts when installing a radiator in the side Accessories available accessory set Volume 59 l Dimensions Width: 28.5 cm x Height: 45.2 cm x Depth/Length: 46 cm
The NZXT H6 RGB+ (2026) in the elegant all-black version combines modern design, powerful cooling and impressive RGB lighting in a case that was specially developed for demanding gamers and PC enthusiasts. The striking panoramic glass front with seamless corner glazing offers an impressive view of the installed hardware and makes every system a visual highlight on the desk. Thanks to the innovative dual-chamber layout, the power supply, drives and cables are neatly separated from the main system. This not only ensures a tidy look, but also improves the airflow within the case. The angled front fans direct fresh air specifically to the most important components and ensure efficient cooling of the processor and graphics card, even under high load. The H6 RGB+ is equipped with powerful RGB fans ex works, which ensure an optimal balance of cooling performance and impressive lighting effects. The integrated RGB control enables easy synchronization of the lighting and creates individual color accents that perfectly match your own setup. Generous mesh areas and support for numerous additional fans and large water cooling radiators offer maximum flexibility for powerful gaming and high-end systems. With support for ATX, Micro-ATX and Mini-ITX motherboards as well as enough space for modern high-end graphics cards and powerful CPU coolers, the case is ideal for current and future hardware generations. Thoughtful details such as side panels that can be removed without tools, an integrated cable management system and a GPU support make assembly easier and ensure a professional appearance. Tower case type Color black EAN 5056547209357 Manufacturer no. CC-H62FB-P1 H6 series Midi tower design Motherboard form factor ATX Material steel, tempered glass Window Kit Yes Mesh front Yes Internal dimensions plug-in card length maximum 390 mm Internal dimensions CPU cooler height maximum 165 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 200 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Slots Slots Tool-free Yes Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x F120mm RGB fan pre-installed Notes Cable management: 90 mm, Nylon dust filter: Bottom, Front Right: 1 x F360 mm RGB reverse fan pre-installed, Top: 3 x 120 mm fans can be installed, 2 x 140 mm fans can be installed, Bottom: 1 x F360 mm RGB reverse fan pre-installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: 360 mm (up to 400 mm), back: 120 mm Rear connection of the motherboard Yes Further information The H6 RGB+ comes with pre-installed RGB fans and Control Hub Lite. Accessories included User manual, mounting accessories, Control Hub Lite, 2 x F360 RGB reverse fans, 1 x F120 RGB fan Volume 55 l Dimensions Width: 29.2 cm x Height: 44.8 cm x Depth/Length: 42 cm Weight 9.3kg
The NZXT H6 RGB+ (2026) in the elegant all-black version combines modern design, powerful cooling and impressive RGB lighting in a case that was specially developed for demanding gamers and PC enthusiasts. The striking panoramic glass front with seamless corner glazing offers an impressive view of the installed hardware and makes every system a visual highlight on the desk. Thanks to the innovative dual-chamber layout, the power supply, drives and cables are neatly separated from the main system. This not only ensures a tidy look, but also improves the airflow within the case. The angled front fans direct fresh air specifically to the most important components and ensure efficient cooling of the processor and graphics card, even under high load. The H6 RGB+ is equipped with powerful RGB fans ex works, which ensure an optimal balance of cooling performance and impressive lighting effects. The integrated RGB control enables easy synchronization of the lighting and creates individual color accents that perfectly match your own setup. Generous mesh areas and support for numerous additional fans and large water cooling radiators offer maximum flexibility for powerful gaming and high-end systems. With support for ATX, Micro-ATX and Mini-ITX motherboards as well as enough space for modern high-end graphics cards and powerful CPU coolers, the case is ideal for current and future hardware generations. Thoughtful details such as side panels that can be removed without tools, an integrated cable management system and a GPU support make assembly easier and ensure a professional appearance. Tower case type Color white EAN 5056547209364 Manufacturer no. CC-H62FW-P1 H6 series Midi tower design Motherboard form factor ATX Material steel, tempered glass Window Kit Yes Mesh front Yes Internal dimensions plug-in card length maximum 390 mm Internal dimensions CPU cooler height maximum 165 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 200 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Slots Slots Tool-free Yes Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x F120mm RGB fan pre-installed Notes Cable management: 90 mm, Nylon dust filter: Bottom, Front Right: 1 x F360 mm RGB reverse fan pre-installed, Top: 3 x 120 mm fans can be installed, 2 x 140 mm fans can be installed, Bottom: 1 x F360 mm RGB reverse fan pre-installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: 360 mm (up to 400 mm), back: 120 mm Rear connection of the motherboard Yes Further information The H6 RGB+ comes with pre-installed RGB fans and Control Hub Lite. Accessories included User manual, mounting accessories, Control Hub Lite, 2 x F360 RGB reverse fans, 1 x F120 RGB fan Volume 55 l Dimensions Width: 29.2 cm x Height: 44.8 cm x Depth/Length: 42 cm Weight 9.3kg
