O11 DYNAMIC MINI Think Big. Build Small. O11D MINI adding to the O11 Dynamic series, the classic and mordern looking. A case that would accommodate the maximum number of water-cooling configurations without being oversized. With a modular back panel design, the user has the option to choose from 3 slots/ 5 slots/ 7 slots I/O shield to optimize the case to the configuration of user’s choice. Supports mini-ITX, micro-ATX, ATX, and E-ATX motherboard sizes. and up to 9 fans to cool the chassis.
BEYOND THE POWER MAG FORGE 321R AIRFLOW Supports up to 360 mm AIO liquid cooler and large 40 series GPU. Supports up to 11 x system fans configuration, providing ventilation and stable performance to the whole system. Built-in ARGB fans and control board, providing striking lighting and vivid lighting effects. 1 x USB 3.2 Gen 2x2 Type-C port (20Gbps) & 2 x USB 3.2 Gen 1 Type-A ports (5Gbps). Tempered Glass Side Panel displays ARGB lighting effects. The Magnetic Dust Filter on the top vents being easily remove for cleaning. LED Switch button provides intuitively control & 9 lighting effects.
With the Lian Li O11 Dynamic Mini V2 Flow, your gaming setup is sure to stand out: Despite its compact design, this mini case offers a spacious interior with enough room to make your vision a reality. Whether you opt for air cooling, an AiO water cooling system, or vertical GPU installation—this case can handle it all and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior allows the installation of powerful components Clean cable management: Cable holders and support for motherboards with back-connect design for tidy cable routing Includes GPU brackets: Graphics card can be installed vertically or horizontally Dust protection: Easy-to-clean dust filters at multiple locations Five pre-installed fans: Three 120 mm reverse-blade fans at the bottom and two on the side The Lian Li O11 Dynamic Mini V2 Flow: A mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 Flow with sample hardware Featuring tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 Flow lets you showcase your hardware. Its compact size allows it to sit comfortably on your desk and become the centerpiece of your gaming setup—all without annoying cable clutter inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable holders, the case enables clean cable routing. A built-in bracket for the heavy 24-pin ATX cable ensures it stays neatly in place, while cleverly positioned straps keep all other cables organized. The drive cages can also double as a hiding spot for cables. This makes cable management effortless—perfect for both beginners building their first gaming PC and pros tired of spending hours on cable routing. Flexible installation for motherboards and AiO water coolers A vertically adjustable motherboard standoff offers you more flexibility when installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The top position supports 240 mm and 360 mm AiO liquid coolers, while the bottom position also allows for a 280 mm radiator. Well cooled, even under full load Supports up to nine fans Space for two water cooling radiators Mesh panel on the top Dust filter on the bottom The fans and radiators provide sufficient cooling for your gaming hardware, even under maximum load. A mesh panel and dust filter help reduce dust build-up inside the case, prolonging the life of your components. Lian Li O11D Mini V2 Flow fans The Flow version of the O11D Mini V2 comes with five fans pre-installed. These 120 mm fans feature reverse blades, ensuring a clean look without sacrificing essential airflow. Ready for peak performance with enough space for large GPUs The interior of the tower is designed to accommodate even large graphics cards up to 400 mm in length—whether mounted horizontally or vertically. The included GPU brackets ensure a secure hold in both scenarios, giving you the freedom to choose your preferred GPU orientation. Supports motherboards in Mini-ITX, mATX, and ATX form factors—including models with rear cable management using a back-connect design. Combined with well-thought-out cable holders and Velcro straps, the result is a tidy, clean look with all cables elegantly routed to the back of the motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O panel The I/O panel module can be attached either on the top or at the bottom front. This lets you place the case wherever you want and still have easy access to the button and ports. If you position the panel on the top, the bottom cover is also removable—improving airflow.
With the Lian Li O11 Dynamic Mini V2 Flow, you can make your gaming setup a real eye-catcher: Despite its compact design, this mini case offers a spacious interior with enough room to make your visions a reality. Whether you prefer air cooling, water cooling with an AiO, or vertical installation of your graphics card, this case allows all that and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior for installing powerful hardware Clean cable management: Cable holders and support for motherboards with back-connect design for tidy routing Includes GPU brackets: Allows you to install your graphics card both vertically and horizontally Dust protection: Easy-to-clean dust filters at multiple locations Five pre-installed fans: Three 120 mm fans at the bottom and two 120 mm fans on the side with reverse blades The Lian Li O11 Dynamic Mini V2 Flow: Mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 Flow with sample hardware Equipped with tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 Flow allows you to showcase your hardware. Thanks to its compact size, it fits easily on your desk and instantly becomes the centerpiece of your gaming setup—without annoying cable clutter inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable holders, the case allows you to route cables cleanly. An integrated holder for the heavy 24-pin ATX cable ensures it stays neat and secure, while cleverly positioned straps keep all other cables bundled together. The drive cages can also be used to hide your cables. This makes cable management effortless—whether you're a beginner building your first gaming PC or a pro who doesn’t want to spend hours organizing cables. Flexible installation for motherboards and AiO water coolers With a vertically adjustable motherboard standoff, the case gives you more flexibility for installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The upper position allows you to mount 240 mm and 360 mm AiO coolers, while the lower position supports a 280 mm radiator as well. Well cooled even under full load Up to nine fans possible Space for two water cooling radiators Mesh panel on the top Dust filter on the bottom The fans and radiators ensure adequate cooling for your gaming hardware, even under full load. A mesh panel and dust filter help reduce dust buildup inside the case, extending the life of your hardware. Lian Li O11D Mini V2 Flow fans The Flow version of the O11D Mini V2 comes with five fans pre-installed. These 120 mm fans are equipped with reverse blades: so you always have a clean look without sacrificing precious airflow. Ready for top performance with space for large GPUs The case interior is designed so that even large graphics cards up to 400 mm fit comfortably—whether installed horizontally or vertically. The included GPU brackets ensure a secure hold in both scenarios. This gives you the freedom to choose your preferred GPU installation. Supports motherboards with Mini-ITX, mATX, and ATX form factors—including models with rear cable management (back-connect design). Combined with thoughtful cable holders and Velcro straps, this results in a tidy, clean look: All connectors are neatly concealed behind the motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O Panel The I/O panel module can be mounted both on top of the case and at the front bottom. This allows you to position the case exactly as you like while always having easy access to the power button and ports. If you mount the panel on top, the bottom cover is also removable—improving airflow.
This cable from Aquacomputer, is used for emergency shutdown of the computer in case of alarm. It is compatible with the Vision series and connects to the power button input of the main board without affecting the power button. Included in delivery: 1x cable (length 70cm) Compatible with the following devices: cuplex cryos NEXT with VISION VISION connection terminal for cryographics (23664, 23665, 23666, 23667) VISION Touch (53232, 53235) OCTO (53286) Note: Before connecting the cable, please make sure that the alarm output/tacho signal output of the corresponding device is configured correctly! Brief instructions: Settings for VISION devices (in aquasuite software): Tab "Alarm settings": Selection item "Power button (53216)" must be activated. Only then connect the alarm cable to the mainboard. Then check the correct function by provoking an alarm. If the PC does not switch off, turn the plug on the mainboard 180 degrees and repeat the test. During the emergency shutdown data can be lost because the operating system and open programs are not closed properly!
Darkflash DS900W computer case without fans (White).The Darkflash DS900W case combines modernistic design with high functionality - the panoramic glass without A-pillar (A-Pillar) strikingly displays the interior, and the well-thought-out design ensures stability and easy installation. It supports up to 10 fans and 360mm cooling to ensure efficient heat dissipation. Dust filters protect components, and the large internal space allows for mounting high-performance components. A USB Type-C (Universal Serial Bus, a connector standard used to power or charge electronic devices, as well as transfer data) connector on the front ensures fast and seamless connectivity, while the aesthetically pleasing finish and sturdy construction make it a great choice for those looking to assemble a high-performance and modern PC setup.Minimalist design with a panoramic viewThe Darkflash DS900W is for those looking for a sleek, futuristic design combined with functionality. The woodgrain accent front and double-sided tempered glass construction give the case a unique style and provide a 270° panoramic view of components without a disruptive A-pillar, making the entire interior composition aesthetically pleasing and transparent. With Darkflash, you'll build a stylish gaming space while providing your computer components with maximum protection.Stable design without compromisesThe case is based on a mechanical structure, which is shaped like a closing bracket, which translates into greater rigidity and resistance to deformation. The lack of a classic A-pillar does not negatively affect stability - on the contrary, the whole structure is characterized by high load-bearing capacity and strength, which will be especially appreciated by users building high-performance sets with heavy graphics cards.Powerful cooling without limitsThe DS900W is designed for maximum thermal efficiency. Up to 10 120mm fans can be installed inside, as well as CPU (Central Processing Unit, CPU) cooling up to 170mm high, effectively keeping temperatures down even during heavy use. Additional vents and a metal mesh back panel increase airflow and improve cooling performance by up to 15% while reducing noise levels (10% reduction). This allows you to enjoy pleasant, quiet operation, whether you are playing more demanding titles or using advanced graphics programs.Full protection against dustThe entire chassis has been protected from dust - it uses covers that effectively block particles, pollen and other debris from getting inside. This solution keeps the interior clean, which not only extends the life of components, but also makes them easier to maintain.Thoughtful space for expansionInside, there is no shortage of space for large components. In the DS900W you can mount a graphics card of up to 425 mm in length, as well as a heatsink of up to 360 mm on top and 240 mm on the side. The case supports motherboard formats ATX (Advanced Technology eXtended, standard motherboard and computer case size), M-ATX (Micro Advanced Technology eXtended, motherboard and computer case size smaller than ATX) and ITX (Information Technology eXtended, compact motherboard and computer case format). In addition, 7 PCI (Peripheral Component Interconnect, a connector standard for expansion cards, such as graphics or sound cards) slots provide ample opportunity to expand the kit with more expansion cards. Darkflash thinks of the most demanding gamers who expect reliability from their hardware.Easy access to the Type-C portOn the front of the case is a USB Type-C port, which offers fast data transfer (up to 10 Gbps) and convenient access for various electronic devices. This solution makes the case ready for current hardware standards, being always at your fingertips.Functional details and solid finishThe Darkflash DS900W is equipped with anti-vibration trapezoidal feet, which increase the stability of the design and reduce vibrations. Inside you'll find room for two SSDs (Solid State Drive, solid state drive) and two HDDs (Hard Disk Drive, hard disk drive), and the clear interior layout easily accommodates the components you need, while maintaining order and good air circulation.Includedmotherboard screws x18power supply screws x6hard drive screws x9copper post x3 (6 pieces pre-installed)fan coverclamp x5fan screws x12copper spacerHD audio support x2USB cap x3user manual ManufacturerDarkflashModelDS900WHousing typeMidi TowerSide panelTempered glassMotherboard standardATX, ITX, M-ATXPower supply standardATX, bottom mountSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots7Max PSU length360 mm on top; 240 mm on the sideMax length of graphics card425 mmMax height of CPU cooler170 mmMax number of fans10Fan mounting optionsTop: 120 mm x3/140 mm x2; Side: 120 mm x3; Rear: 120 mm; Bottom: 120 mm x3Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, Reset, LEDConnectorsType-C x1, USB3.0 x1, USB2.0 x1, HD AudioMaterial0.5 mm SPCCColorWhiteHeight454 mmWidth218 mmDepth434 mm
Midi tower with optimized airflow, mesh front, compatible with up to E-ATX motherboards, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels, three pre-installed fans The HAVN BF 360 Flow is ideal for gamers and hardware enthusiasts who accept no compromises: solid cooling performance, smart design, and full compatibility. Aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management make this case the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUThree pre-installed fans: 2x 180 mm & 1x 140 mmCompatible with E-ATX motherboards up to 277 mm wideGPU support bracket & 410 mm clearance – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & tidy cable managementHAVN BF 360 FlowHAVN BF 360 Flow: Airflow meets styleThe front features a striking ribbed mesh that precisely draws in air and reduces flow loss. An integrated 135° guide directs cool air directly onto the GPU and CPU for optimal cooling without heat buildup. Flexible mounts for fans or radiators are included, suitable for both air and water cooling configurations.HAVN BF 360 Flow side viewCooling power for your high-end hardwareThere is space for up to six fans. The three pre-installed fans ensure a strong supply of fresh air right out of the box. Alternatively, radiators up to 360 mm can be installed at the front and top. With 195 mm of CPU cooler height clearance and a spacious interior, you have enough room for large air coolers or custom water loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation at peak performance.HAVN BF 360 Flow side rearCompatibility without compromiseThe BF 360 offers ample space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm of clearance for graphics cards – perfect for the latest RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit comfortably in the lower compartment. Two modular drive trays can hold either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 Flow rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you get pre-configured cable routing, straps, and wide channels for ultra-fast, tidy cable management. The front and top panels attach magnetically, with rubberized grip edges and a handy pull strap – maintenance and upgrades have never been so easy.HAVN BF 360 Flow I/O panelModern I/O panel for your setupThe I/O panel features a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. This means the BF 360 is fully equipped for the future, whether as a gaming rig or workstation.
- Elegantne disain teemandiosaga - Koonusekujuline disain tagab mugavuse ja stabiilsuse - Saab kuumutada või jahutada temperatuurimängude jaoks - Mugavaks ja kontrollitud kasutamiseks - Püsib kasutamise ajal paigal See luksuslik anaaltapp Rosy Gold kollektsioonist on elegantse disainiga ja valmistatud nahasõbralikust alumiiniumist. Soovi korral võid seda soojendada või jahutada, et kogeda erutavat temperatuurimängu. Koonusekujuline mudel muudab sissetoomise mugavaks ning lai alus hoiab tappi turvaliselt paigal. Sobib kasutamiseks nii vee- kui ka silikoonipõhiste libestitega. Kogupikkus on 9,5 cm, sisestatava osa pikkus 8 cm ning suurim läbimõõt 3,4 cm.
No. of drive bays: 3 MOLEX power connectors: 2 Floppy power connectors: 0 SATA power connectors: 2 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 1 Number of power supply connector 4+4-pin 12V: 0 8-pin 12V power connectors: 0 Dimensions: 290mm x 92,5mm x 280mm Weight: 3
ASUS TUF Gaming GT501 Mid-Tower Computer Case for up to EATX Motherboards with USB 3.0 Front Panel, Smoked Tempered Glass, Steel Construction, and Four Case Fans.
Mid-Tower with support for EATX Motherboards featuring a metal chassis and panels with custom TUF Gaming spatter pattern and 4mm-thick smoked, tempered-glass full view side panel.
Keep Your Cool with three 120mm Aura Sync RGB-illuminated fans, one 140mm rear PWM fan, and up to seven optional fan-mounting points.
Custom Liquid Cooling Ready with support for top or front mounted 360mm radiators, rear mounted 140mm radiator, and pre-drilled water pump/reservoir mounting holes.
Vertical GPU Expansion Slot plus 7 traditional expansion slots.
Ergonomic, Woven-cotton Carry Handles enable easy and safe transport up to 65lbs
No. of drive bays: 7 Dimensions: 530 x 232 x 545.5 mm Weight: 19.85 Other features: Expansion sockets 8 + 2 The maximum length of the GPU is 400 mm The maximum cooling length of the processor is 170 mm Heatsink compatibility 140/280/360 mm Fans: Front: up to 3 x 120 mm / 3 x 140 mm / 2 x 200 mm Top: up to 3 x 120 mm / 2 x 140 mm / 2 x 200 mm Back: up to 1 x 120 mm / 1 x 140 mm
Tootja koduleht: http://www.asus.com/Motherboards-Components/Gaming-Cases/TUF-Gaming/TUF-Gaming-GT301/ Mõõtmed: 214 x 482 x 426 mm (L x K x S) Kaal: umbes 7,2 kg Materjal: teras (šassii, ees), karastatud klaas (külgpaneel), plastik (ees, sisend- / väljundpaneel) Värv: must Kujutegur: ATX, Micro-ATX, Mini-ITX Paigaldatud ventilaatorid: 3x 120 mm (ees, D-RGB-LEDid) 1x 120 mm (taga) Kokku võimalik paigaldada: 2x 140 / 3x 120 mm (ees) 2x 120 mm (peal) 1x 120 mm (taga) Radiaatori kinnitused (HDD ja / või ventilaatori pesade osaline loobumine): 1x max. 280/360 mm (ees) 1x max. 120 mm (taga) Filter: ees, üleval, toiteallikas (eemaldatav) Kettabaasid: 2x 3,5 tolli / 2,5 tolli (sisemine; lahti ühendatud) 4x 2,5 tolli (sisemine) Toiteallikas: 1x tavaline ATX (valikuline) Laienduspesad: 7 I/O paneel: 2x USB 3.0 tüüp A (USB 3.1 Gen1) 1x heli sisse / välja 1x RGB-LED juhtimine Graafikakaardi maksimaalne pikkus: 320 mm Maksimaalne protsessori jahuti kõrgus: 160 mm Toiteallika pikkus kuni: 160 mm Komplektis: 1x ASUS TUF GT301 korpus 4x 120 mm ventilaatorid (eelinstallitud) 25x kruvi põhiplaadi ja 2,5-tolliste draivide jaoks 8x kruvi 3,5-tolliste ajamite ja toiteallika jaoks 1x Phillipsi adapter vahetükkide jaoks 8x kaablikinnitust 2x kummikorgid graafikakaardi jaoks 1x hoidik kruvidega kõrvaklappide jaoks 3x takjakinnitusega kaablisidemed
Product kirjeldus: CORSAIR 5000D - MDT - extended ATX Product Type: System cabinet Form Factor: Mid Torn värv: valge I/O Ühendusi: 2 x USB 3.0 1 x USB-C 3.1 1 x headphone/microphone Supported Motherboards: ATX, microATX, Mini-ITX, Extended ATX System Cabinet Features: kaabel management holes, toetab 120 mm radiator in rear, toetab 280/360 mm radiator in front panel, toetab 280/360 mm radiator in top panel, toetab 360 mm radiator in right side, vertikaalne graphic kaart orientation, tempered glass left panel Power Device: No toiteplokk Specification Compliance: ATX mõõtmed (WxDxH): 24.5 cm x 52 cm x 52 cm kaal: 13.84 kg Manufacturer Warranty: 2-year garantii
