11 | 66,46 € | Vaata | |||
Korpus Thermaltake The Tower 250 Hydrangea Blue Mini Tower Sinine Thermaltake korpus The Tower 250 (hellblau, Tempered Glass) | 11 | 169,37 € | Vaata | ||
11 | 461,11 € −46,52 € | Vaata | |||
11 | 125,59 € | Vaata | |||
Korpus Thermaltake The Tower 250 Butter Caramel Thermaltake korpus The Tower 250 (kollane, Tempered Glass) | 11 | 169,37 € | Vaata | ||
Korpus Darkflash DS900 Mesh computer case without fans (White) Darkflash DS900 Mesh fanless computer case (White)The Darkflash DS900 Mesh is an ATX (Advanced Technology eXtended, a standard for the size of a motherboard and computer case) case that offers great customization possibilities. It supports the installation of up to 12 fans and cooling of up to 360 mm, effectively reducing the temperature of even the most loaded kit. The spacious interior accommodates large GPUs (Graphics Processing Unit, the graphics card) and tall CPU (Central Processing Unit, the processor) coolers, while the side panel with quick release and the top I/O panel with a USB 3.0 port (Universal Serial Bus, a connector standard used for connecting and charging devices, as well as for data transfer) make everyday use easy. The chassis looks sleek and modern, and the mesh back panel ensures quieter and more efficient operation. It's a solid base for an expanded kit - both for gaming and work.Mesh panel - more air, better coolingOne of the main features of the DS900 Mesh chassis is the mesh front panel, which provides very good airflow to the interior. Combined with the side air ducts, it improves circulation and supports the maintenance of low temperatures even when the system is fully loaded. Although the chassis does not include fans from the factory, the design allows the installation of up to 12 120mm fans, giving you full control over cooling. The chassis also supports water cooling - it will accommodate a radiator of up to 240 mm at the front and up to 360 mm at the top.Thoughtful rear panel designThe rear panel of the case has not been overlooked. It uses a large steel ventilation mesh, which improves air circulation and protects components, while reducing noise by up to 10%. Such a design also improves cooling efficiency by 15% compared to traditional solutions, which is noticeable with intensive use of the computer.Spacious interior and easy expansionThe Darkflash DS900 Mesh gives you a lot of freedom in mounting components. Inside you'll fit a graphics card up to 425 mm long and a CPU cooler up to 170 mm high. With 7 PCI (Peripheral Component Interconnect, a type of connector used to connect expansion cards) slots, it is possible to install larger graphics cards or additional expansion cards. The chassis design itself (470 × 218 × 454 mm) allows for seamless installation of ATX, micro-ATX (Micro Advanced Technology eXtended, a motherboard size standard smaller than the standard ATX) and ITX (Information Technology eXtended, a very compact motherboard standard) motherboards.Convenience of use and easy access to the interiorThe tempered glass side panel opens on a hinge and features a quick release. This allows you to quickly access the interior without having to unscrew screws, which greatly facilitates servicing, upgrades and presentation of the built kit. Inside, you'll also find cable grommets with rubber covers, which help to aesthetically guide cables and increase safety of use.Modern I/O panel and tidinessThe top of the case features a clean, organized panel with the most important connectors. Among other things, there is a USB 3.0 port for fast data transfer and convenient charging of mobile devices. This layout ensures that access to ports is always quick and convenient, no matter where your case is located.Tailored to the gaming workstationA uniform color scheme and a simple yet modernistic design make the DS900 Mesh fit well with both a gaming setup and a more minimalist office. The transparent side panel allows to expose the interior, which will be appreciated by users who focus on aesthetics and order inside the case.Includedmotherboard screws x18power supply screws x6hard drive screws x9copper post x3 (6 pieces installed)fan coverclamp x5fan screws x12copper spacerHD audio support x2USB cap x3USB cap x2Type-C capuser manual ManufacturerDarkFlashModelDS900 MeshHousing typeMidi TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX, bottom mountSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots7Max PSU lengthTop: 360mm, 240mm; Front: 240mmMax length of graphics card425mmMax height of CPU cooler170 mmMax number of fans12Fan mounting optionsTop: 120 mm x3/140 mm x2; Front: 120 mm x3; Side: 120 mm x2; Rear: 120 mm x1; Bottom: 120 mm x3Water cooling mounting optionsFront: 240 mm; Top: 360 mmNumber of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB2.0 x2; USB3.0, HD AudioMaterial0.5 mm SPCCColorWhiteHeight470 mmWidth218 mmDepth454 mm | Laos | 11 | 37,90 € | Vaata | |
Korpus Azza PC Gaming Case Midi ATX Guardian 520B Black Glass Azza Guardian Glass. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Placering af strømforsyning: Bund, Understøttede strømforsyning formfaktorer: ATX. Understøttede diametre for frontventilatorer: 120,140 mm, Understøttede diametre for sideventilatorer: 120 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 3.5", SSD-formfaktor: 2.5". Bredde: 220 mm, Dybde: 466 mm, Højde: 486 mm | 11 | 111,10 € | Vaata | ||
Korpus Mars Gaming MC-3000 Computer case ATX / 4x FAN PC korpus - Mars Gaming - MC-3000 - Neli ja jäine jahutus - Karastatud klaas - Aerodünaamiline disain | 1-3 tp | 11 | 63,54 € | Vaata | |
Korpus Zalman PC case P60 Mid-Tower 5x ARGB fans black Zalman P60 Black-Case Zalman P60 Black to stylowa obudowa ATX mid-tower, która łączy nowoczesny design z wydajnym chłodzeniem. Czarna obudowa, wyposażona w duży szklany panel boczny i pięć fabrycznie zainstalowanych wentylatorów ARGB, oferuje zarówno estetykę, jak i funkcjonalność – idealną dla graczy, twórców treści i entuzjastów komputerów PC, którzy cenią sobie zarówno wygląd, jak i wydajność. Najważniejsze cechy Nowoczesna kompatybilność z formatami ATX/Micro-ATX/Mini-ITX – obudowa obsługuje wszystkie popularne formaty płyt głównych. Eleganckie czarne wykończenie ze szkłem hartowanym po lewej stronie i częściowo szklanym frontem – idealne do wyeksponowania podzespołów. Pięć fabrycznie zainstalowanych wentylatorów ARGB (trzy z boku, dwa z tyłu) – zapewnia doskonały przepływ powietrza i efektywną wentylację. Szerokie możliwości chłodzenia i rozbudowy: maksymalna długość karty graficznej do ok. 435 mm, wysokość chłodzenia procesora do ok. 170 mm, długość zasilacza do ok. 180 mm. Wszechstronne opcje radiatorów i wentylatorów: np. góra: 120 mm/140 mm/240 mm/280 mm/360 mm; dół: do 360 mm – co umożliwia również chłodzenie cieczą. Przednie porty I/O z USB typu C, dwoma portami USB 3.0 oraz sterowaniem audio i resetem/diodami LED – dla nowoczesnych urządzeń peryferyjnych. Siatkowa konstrukcja na górze, bokach i spodzie zapewnia lepszy przepływ powietrza i niższe temperatury. Obudowa P60 Black zachwyca na wielu poziomach: Wzornictwo i estetyka: Czarne wykończenie w połączeniu z dużym szklanym panelem bocznym eksponuje sprzęt. Czysty, kanciasty design nadaje obudowie nowoczesny wygląd. Wydajność chłodzenia: Dzięki pięciu fabrycznie zainstalowanym wentylatorom ARGB przepływ powietrza zaczyna się z boku (3 x wlot boczny) i kończy z tyłu (2 x wylot), tworząc ciągły przepływ powietrza. Dodatkowe radiatory lub wentylatory można opcjonalnie zamontować u góry i u dołu. Kompatybilność komponentów: Maksymalna długość karty graficznej wynosząca około 435 mm i wysokość chłodzenia procesora wynosząca do około 170 mm zapewniają mnóstwo miejsca na wydajne komponenty. Nowoczesny panel przedni: USB typu C, USB 3.0, gniazdo audio i diody LED nie pozostawiają nic do życzenia – idealne do podłączania zewnętrznych dysków SSD lub nowoczesnych zestawów słuchawkowych. Elastyczność: Niezależnie od tego, czy chodzi o smukłą obudowę, wydajny komputer do gier, czy kompaktową stację roboczą do tworzenia treści – obsługa formatów ATX, mATX i Mini-ITX sprawia, że P60 jest wszechstronny. Łatwa instalacja: Przemyślany układ wnętrza, w tym solidne prowadzenie kabli i duże otwory montażowe, upraszcza instalację – nawet dla mniej doświadczonych użytkowników. | 11 | 106,12 € +0,23 € | Vaata | ||
Korpus Darkflash M305 computer case (without fans) - Black Darkflash M305 fanless computer case (Black)Darkflash M305 is a meticulously designed Micro-ATX computer case that combines compact dimensions with functionality and futuristic design. It was created for users looking for good value for money, without compromising on airflow, hardware compatibility and aesthetics. A transparent side panel made of tempered glass allows you to effectively display your components, which is sure to be appreciated by fans of RGB backlighting (Red, Green, Blue, a backlighting system based on three colors: red, green and blue) or elegant kits. From now on, your gaming space will look classy and stylish!Practical solutions for everyday useThe case is equipped with a side panel made of tempered glass, fixed with convenient thumb screws. This gives you quick and easy access to the computer's interior, without the need to reach for tools. This solution works great for both hardware upgrades and regular cleaning of the cooling system. The front of the case has a modern, openwork panel with vents, which not only gives the whole case a dynamic character, but most importantly helps air circulation, protecting components from overheating.Efficient cooling systemDarkflash M305 offers a lot of freedom when planning cooling - you can fit as many as 7 120 mm fans inside. Such an arrangement allows you to build a very efficient air cooling system, which translates into stable operation of the processor, graphics card and other components, even during intensive gaming or work on graphics programs. The layout of the fans can be customized to ensure even airflow throughout the case.Compact format, big possibilitiesAlthough the case has small external dimensions (325 × 195 × 387 mm), its interior has been designed for maximum space utilization. It will easily accommodate a graphics card up to 300 mm in length and a CPU (Central Processing Unit, CPU) cooling system up to 160 mm in height. The case supports M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than the standard ATX) and ITX (Information Technology eXtended, an ultra-compact motherboard format) motherboards, allowing you to choose the right configuration for both an office and gaming PC.Thoughtful interior and space for dataInside you'll find a specially designed mounting bracket that allows you to install two SSDs (Solid State Drive, solid state drive) and two traditional HDDs (Hard Disk Drive, hard drive). This arrangement gives you a lot of flexibility in scheduling your operating system, games and data storage. The entire interior has been designed with order in mind - cables can be routed aesthetically, which promotes both appearance and better cooling.Quick access to portsOn the top edge of the case is an intuitive panel of inputs and outputs, including an advanced USB 3.0 connector (Universal Serial Bus, a connector standard for powering and charging electronic devices, as well as for data transfer). It allows fast file transfer and convenient charging of mobile devices. The top location of the ports makes it convenient to use them no matter where the computer stands - on or under the desk.Includedmotherboard screws x12hard drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelM305Housing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPSU standardM-ATX, bottom mountSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots4Max PSU length160 mmMax length of graphics card300 mmMax height of CPU cooler160 mmMax number of fans7Fan mounting optionsRear: 120 mm x1; Top: 120 mm x2; Front: 120 mm x2; Bottom: 120 mm x2Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.45 mm SPCCColorBlackHeight387 mmWidth195 mmDepth325 mm | 11 | 20,05 € | Vaata | ||
Korpus Darkflash C275P computer case without fans (Black) Darkflash C275P fanless computer case (Black)The Darkflash C275P is a compact M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than standard ATX) case in a modern style that offers a 270° panoramic view of your PC components through tempered glass, quick access to the interior, and great cable organization thanks to a clever layout with seven cable slots. It supports water and air cooling with room for two heatsinks and up to seven fans, and allows for long graphics cards and tall CPU (Central Processing Unit, CPU) coolers. On a day-to-day basis, it provides convenience with a USB 3.0 port (Universal Serial Bus, an interface used for powering and charging electronic devices, as well as for data transfer) and a functional interior with space for drives. It's a solid base for those looking for an aesthetically pleasing and easily expandable case.Compact and functionalThe Darkflash C275P computer case is an option for those who appreciate the combination of modern design and practical solutions. Its compact dimensions of 333 x 275 x 323 mm make it perfect for both the office and the home workstation of a gamer or creator. The side panel made of tempered glass is equipped with a quick release, making access to the inside of the case quick and convenient. The lack of a support column and the 270° panoramic glazing allow to expose all components and give the whole thing a modern, lightweight look.Thoughtful layout for better organizationThe C275P supports M-ATX and ITX (Information Technology eXtended, an ultra-compact motherboard format) motherboards and offers space for graphics cards up to 325 mm in length and CPU coolers up to 155 mm in height. In addition, five PCI (Peripheral Component Interconnect, a communication bus standard used in computers to connect various peripherals to the motherboard) slots allow for easy expansion of the kit. Thanks to an optimized cable management system with seven slots and space for cables above the motherboard, keeping things tidy inside is much easier.Ready for high-performance coolingDespite its compact size, the case is designed for optimal air circulation. It allows the installation of as many as seven 120 mm fans and two 240 mm radiators - on the bottom or side of the case. Such a solution allows efficient heat dissipation, even in more demanding configurations.Functionality for everyday useOn the top panel you will find a USB 3.0 port for fast data transfer and convenient device charging. The case is also equipped with a universal mounting bracket that can accommodate two SSDs (Solid State Drive, solid state drive) and one HDD (Hard Disk Drive, hard drive). The interior is designed for easy installation and expansion so that you can customize the computer to suit your own needs.Includedmotherboard screws x10hard disk drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelC275PHousing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardM-ATX, at the bottom or side of the caseSlots for internal drives3 (2 x 2.5", 1 x 3.5")Expansion card slots5Max PSU length240 mmMax length of graphics card325 mmMax height of CPU cooler155 mmMax number of fans7Fan mounting optionsRear: 120 mm x1; Top: 120 mm x2; Side: 120 mm x2; Bottom: 120 mm x2Water cooling mounting optionsSide 240 mm; Bottom 240 mmNumber of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight333 mmWidth275 mmDepth323 mm | 11 | 22,95 € | Vaata | ||
Korpus Jonsbo D200 Mid Tower mATX Tempered Glass Mini Temp Display Black Case Mini tower in black, supports up to 7 fans, room for a radiator up to 240mm, motherboards up to mATX, GPU length up to 410mm, and CPU cooler height up to 171mm, accommodates up to two drives, with a display at the bottom of the front panel The Jonsbo D200 mini case offers you maximum performance in minimal space. Thanks to its compact design, it fits easily on any desk or in your living room without compromising hardware compatibility. Perfect for anyone looking for a powerful gaming PC in a space-saving format. Black mini tower with panoramic design Effective cooling performance with support for seven fans and radiator up to 240mm Supports motherboards up to mATX Space for graphics cards up to 410mm and CPU coolers up to 171mm in height Small front display to show CPU system data Jonsbo D200: Compact mini tower with tempered glass sides and front The Jonsbo D200 is a mini tower that, despite its small size, offers enough space for powerful hardware. Whether high-end graphics cards or an AiO water cooling system—the possibilities are extensive. Extensive cooling options with fans and radiators To keep your hardware cool under any load, the Jonsbo D200 can accommodate up to seven fans simultaneously. The top supports three 120mm or two 140mm fans. Three 120mm fans can be installed on the power supply cover, while one additional 120mm fan can be fitted at the rear. An AiO water cooling system can also be installed if you prefer water cooling for your powerful hardware. There is space at the top for a radiator up to 240mm. Hardware installation The case offers plenty of space for powerful gaming hardware. It supports the installation of large graphics cards up to 410mm, allowing even the latest high-end GPUs from the RTX 5000 series to be installed. Motherboards up to mATX format are supported. The CPU cooler should not exceed a height of 171mm. For storage, up to two drives can be installed. CPU display on the front The built-in display in the Jonsbo D200 always shows you the current temperature of your CPU—for maximum control. | Laos | 11 | 63,79 € | Vaata | |
Korpus Jonsbo D200 Mid Tower mATX TG Mini Temp Display - white Mini tower in white, supports up to 7 fans, space for a radiator up to 240mm, motherboards up to mATX, GPU up to 410mm, and CPU cooler up to 171mm in height, supports up to two drives, with a display at the bottom of the front panel The Jonsbo D200 mini case offers you maximum performance in minimal space. Thanks to its compact design, it fits effortlessly on any desk or in your living room without compromising on hardware compatibility. Perfect for anyone looking for a powerful gaming PC in a space-saving format. Black mini tower with panorama design Effective cooling performance thanks to seven fans and radiator up to 240mm Motherboards up to mATX Space for graphics cards up to 410mm and CPU coolers up to 171mm in height Small display on the front to show CPU system data Jonsbo D200: Compact Mini Tower with Tempered Glass on Side and Front The Jonsbo D200 is a mini tower that, despite its small size, offers enough space for powerful hardware. Whether high-end graphics cards or an AiO water cooling system – the possibilities are numerous. Extensive Cooling Options with Fans and Radiators To keep your hardware cool under any load, the Jonsbo D200 can accommodate up to seven fans simultaneously. The top supports three 120mm or two 140mm fans. Three 120mm fans can be installed on the power supply cover, while one additional 120mm fan can be fitted at the rear. An AiO water cooling system can also be easily installed if you prefer to cool your powerful hardware with water cooling. There is space on the top for a radiator up to 240mm. Installing Your Hardware The case provides enough room for powerful gaming hardware. It supports the installation of large graphics cards up to 410mm, so even the latest high-end GPUs from the RTX 5000 series can be installed. Motherboards up to the mATX format are supported. The CPU cooler should not exceed a height of 171mm. To store programs and games, a total of two drives can be installed. CPU Display on the Front The integrated display in the Jonsbo D200 shows you the current temperature of your CPU at all times – for maximum control. | Laos | 11 | 63,79 € | Vaata | |
Korpus Chenbro RM24100 rack-mountable 2U case Das Chenbro RM24100-L ist ein robustes und ausbaubares Gehäuse für professionelle und platzsparende Server-Lösungen. Sein benutzerfreundliches Design bietet einfache Installationen. Mit seiner guten Belüftung bleibt es auf lange Zeit zuverlässig. | 11 | 180,90 € | Vaata | ||
11 | 113,30 € | Vaata | |||
Korpus Darkflash DS900WS ATX computer case without fans (Black) Darkflash DS900WS ATX computer case without fans (Black)The Darkflash DS900WS ATX (Advanced Technology eXtended, a standard motherboard format) is a spacious midi tower case that supports ATX, M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format) motherboards, and its interior will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. The case allows the installation of up to 12 120 mm fans and water cooling. This makes the DS900WS ATX suitable for both gaming sets and heavy-duty PCs. The tempered glass side panel allows you to expose the computer's interior, and the presence of 7 PCI-E (Peripheral Component Interconnect Express, an interface for expansion cards) slots and space for 4 drives (2x HDD, 2x SSD) gives you ample room for expansion.Compatibility and mounting spaceThe case supports ATX, Micro ATX and ITX format motherboards, with the power supply mounted at the bottom as standard. Inside, you'll find space for two 3.5" HDDs (Hard Disk Drives) and two 2.5" SSDs (Solid State Drives) - giving you ample space for data, system and games. The user can install a graphics card up to 425 mm long and a CPU cooler up to 170 mm high. There are also 7 PCI-E slots, making it easy to expand the kit with additional cards.Advanced cooling systemThe Darkflash DS900WS ATX offers extremely extensive cooling capabilities. The chassis can accommodate up to 12 120 mm fans, allowing for effective temperature management even under intense load. It is also possible to mount water cooling - up to 240 mm in the front and up to 360 mm on the top. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation.Practical portsThe top panel features all the necessary connectors: one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), two USB 2.0 ports, and an HD (High Definition Audio) audio connector for headphones and microphone. In addition, there is a power and reset button, making it easier to use the computer on a daily basis. The whole thing is designed for convenience and quick access to the most important functions.Durable construction and thoughtful interiorThe case is made of 0.5 mm SPCC (Steel, Plate, Cold Rolled, Commercial Quality - cold rolled structural steel), which ensures stability and resistance to damage. Its dimensions are 470 x 218 x 454 mm, making it compact, but still very roomy. The interior is designed in a way that makes it easier to mount components and run cables, resulting in better airflow and a more organized look. In addition, part of the right panel is made of metal mesh, which not only protects the hardware from dust, but also helps air circulation. On the other hand, the top and bottom parts of the case made of mesh further promote ventilation, and their magnetic design ensures quick and convenient installation/removal.Tempered glass and stylish designThe left side of the case features a tempered glass panel to expose the computer's interior - including fan backlighting and components. An additional wood-style accent on the front adds a subtle but original touch. ManufacturerDarkflashModelDS900WS ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installedNo fans installedType of fansINF24TButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight454 mmWidth218 mmDepth470 mm | 11 | 36,60 € | Vaata | ||
Korpus Darkflash DS900G computer case (white) DarkFlash DS900G computer case (white)The DarkFlash DS900G is a mid-tower case that offers extensive functionality for demanding users. It supports ATX, Micro-ATX, and ITX motherboards, and its interior allows for the installation of graphics cards up to 425 mm in length and CPU coolers up to 170 mm in height. The interior space has been designed for easy access to components and convenient expansion. The DS900G also offers full support for various cooling systems, making it easy to handle demanding gaming or work setups.Full interior exposureThe curved side panel made of transparent tempered glass allows a full view of the components installed inside. The slightly rounded surface of the glass creates a panoramic effect that sets the case apart from standard models and allows the lighting and aesthetics of the assembly to be fully exposed.Effective coolingThe case has been designed for optimal air circulation. It allows for the installation of up to 10 120 mm fans or a combination of 2 140 mm fans on the top panel. The design provides for 3 fans at the top, 3 on the side, 1 at the rear, and 3 at the bottom, allowing for a highly efficient cooling system. Additionally, water cooling up to 360 mm in length can be installed on the top panel, and up to 240 mm in length on the side.Optimized airflow and noise reductionThe DS900G case has densely spaced ventilation holes that not only improve airflow but also effectively trap larger dust particles. The rear panel is equipped with a steel mesh that improves cooling efficiency by up to 15% while reducing noise levels by approximately 10%.Magnetic dust filtersMagnetically attached dust filters are located at the top and bottom of the case. This makes them easy to remove and clean without having to disassemble other components. This type of solution facilitates daily computer maintenance and helps to maintain optimal operating conditions for the components.Various expansion optionsThe interior of the case has been designed for users who want to maintain aesthetics and order while having space for all the necessary components. The DS900G offers 7 PCIe slots, giving you the freedom to install long graphics cards and additional expansion cards. The mounting space has been designed to ensure adequate airflow, space for cable management, and quick access to the most important components.Flexible drive mounting optionsThe DarkFlash DS900G allows you to install 2 3.5" HDDs and 2 2.5" SSDs. Depending on your needs, various configurations are possible, such as two HDDs and one SSD, or one HDD and two SSDs. This allows each user to tailor the storage layout to their preferences and the specifics of their setup.Convenient access to ports and buttonsThe case offers a practical set of ports and buttons on the front panel. The user has at their disposal one USB 3.0 connector and two USB 2.0 ports, as well as an HD Audio connector. The front panel also features Power and Reset buttons and a button to control the backlight. ManufacturerDarkFlashModelDS900GCase typeMiddle TowerSide panelTempered glassMotherboard standardATX, Micro-ATX, ITXPower supply standardATXInternal drive bays2 × 3.5" (HDD)2 × 2.5" (SSD)Expansion card slots7 PCIe slotsMaximum graphics card length425 mmMaximum CPU cooler height170 mmMaximum number of fansUp to 10 120 mm fansAdditionally: 2 140 mm fans (top)Fan mounting optionsTop: 3 × 120 mm or 2 × 140 mmSide: 3 × 120 mmRear: 1 × 120 mmBottom: 3 × 120 mmWater cooling mounting optionsTop: up to 360 mm or 240 mmSide: up to 240 mmNumber of fans installedNo fans installedButtons and controlsPower, ResetConnectors1 × USB 3.02 × USB 2.01 × HD AudioMaterialSPCC 0.5 mmColorWhiteHeight454 mmWidth218 mmDepth434 mm | 11 | 44,95 € | Vaata | ||
Korpus Darkflash DS900G computer case (black) DarkFlash DS900G computer case (black)DarkFlash DS900G is a Middle Tower chassis that offers extensive functionality for demanding users. It supports ATX, Micro-ATX and ITX format motherboards, and its interior accommodates graphics cards up to 425 mm in length and CPU coolers up to 170 mm in height. The interior space is designed for easy access to components and convenient expansion. The DS900G also offers full support for various cooling systems, so it can easily handle demanding gaming or work setups.Full interior displayThe curved side panel made of transparent tempered glass allows a full view of the components installed inside. The slightly rounded surface of the glass creates a panoramic effect that sets the case apart from standard models and allows the backlighting and mounting aesthetics to be fully exposed.Effective coolingThe case is designed for optimal air circulation. It allows the installation of up to 10 120 mm fans or their combination with 2 140 mm fans on the top panel. The design provides for 3 fans on the top, 3 on the side, 1 on the back and 3 on the bottom, allowing for a very efficient cooling system. In addition, up to 360 mm of water cooling can be installed on the top panel, and up to 240 mm on the side.Optimized airflow and noise reductionThe DS900G chassis features densely spaced vents that not only improve airflow, but also effectively trap larger dust particles. The rear panel is equipped with a steel mesh that improves cooling efficiency by up to 15% while reducing noise levels by about 10%.Magnetic dust filtersThere are magnetically attached dust filters on the top and bottom of the case. As a result, they can be easily removed and cleaned without removing other components. This type of solution simplifies the daily maintenance of the computer and helps maintain optimal operating conditions for components.Various expansion possibilitiesThe interior of the chassis was designed for users who want to keep the chassis aesthetically pleasing and tidy, while still having room for all the components they need. The DS900G offers 7 PCIe slots, which gives you the freedom to mount long graphics cards and additional expansion cards. The mounting space has been planned to ensure adequate airflow, room for cable routing and the ability to quickly access critical components.Flexible disk mounting optionsDarkFlash DS900G allows the installation of 2 HDDs in 3.5" format and 2 SSDs in 2.5" format. Depending on the user's needs, various configurations are possible, such as two HDDs and one SSD or one HDD and two SSDs. This allows each user to tailor the storage layout to their own preferences and the specifics of the set.Convenient access to ports and buttonsThe case offers a practical set of ports and buttons on the front panel. The user has one USB 3.0 and two USB 2.0 ports, as well as an HD Audio connector. The front also features Power, Reset and backlight control buttons. ManufacturerDarkFlashModelDS900GHousing typeMiddle TowerSide panelTempered glassMotherboard standardATX, Micro-ATX, ITXPower supply standardATXSlots for internal drives2 × 3.5" (HDD)2 × 2.5" (SSD)Expansion card slots7 PCIe slotsMax graphics card length425 mmMax CPU cooling height170 mmMax number of fansUp to 10 120 mm fansIn addition: 2 140 mm fans (top)Fan mounting optionsTop: 3 × 120 mm or 2 × 140 mmSide: 3 × 120 mmRear: 1 × 120 mmBottom: 3 × 120 mmWater cooling mounting optionsTop: up to 360 mm or 240 mmSide: up to 240 mmNumber of fans installedNo fans installedButtons and controlsPower, ResetConnectors1 × USB 3.02 × USB 2.01 × HD AudioMaterialSPCC 0.5 mmColorBlackHeight454 mmWidth218 mmDepth434 mm | 11 | 50,95 € | Vaata | ||
Korpus PHANTEKS Evolv X2 Matrix PC case, Midi-Tower, E-ATX, tempered glass, Matrix LED, white With the Phanteks Evolv X2 Matrix, you can build a showpiece gaming system with plenty of space for the latest high-end hardware. The case supports E-ATX motherboards, large graphics cards, and powerful cooling. Motherboards with Back Connect, such as ASUS BTF and MSI Project Zero, keep the interior tidy. Three glass panels provide a clear view of your setup. Additionally, a pixel matrix with 900 LEDs is located at the bottom of the case. Spacious midi-tower: Perfect for the latest hardware Compatible with Back-Connect boards: ASUS BTF & MSI Project Zero Vertical cooling: Space for up to seven 120mm fans GPU compatibility: Graphics cards up to 380 mm in length Clean look: Three large glass panels to showcase your hardware Matrix with 900 LEDs: Display & effects freely customizable Phanteks Evolv Series X2: Showcase case for powerful hardware Evolv X2 Matrix Hardware The interior offers space for Mini-ITX to E-ATX motherboards and also supports boards with rear connectors, keeping the interior organized. Eight PCIe slots and 380 mm of GPU space make it easy to install large graphics cards. A PC case that wants to be seen Evolv X2 Matrix Glass Design Three large external glass panels give you an unobstructed view of your components. Metal covers hide fans and accessories, making your hardware appear almost floating. The LED matrix display runs along the front and the right side at the bottom of the case, showing system information or animations. Whether temperature displays, the time, or your own texts – you can effortlessly customize the screen to match your style, making it a highlight in your gaming setup. Strong cooling through vertical airflow The case utilizes a vertical cooling design: Cool fresh air enters from below and warm air exits at the top. Up to seven 120mm fans can be installed, all hidden within panels for a clean look. Powerful & quiet cooling options Bottom: three 120mm fans Top: three 120mm fans / radiator up to 360 mm Rear: one 120mm fan With 170 mm CPU cooler clearance, even a large tower cooler is possible. For AiO users, a 360 mm radiator fits perfectly in the top panel. NEXLINQ: Easy control for fans and lighting The Evolv X2 Matrix is part of the NEXLINQ ecosystem. Fans, coolers, and RGB elements are connected via a hub and conveniently controlled by software. You can use automatic or custom fan curves and adjust the lighting color. Midi-tower with support for back-connect motherboards Also supports motherboards from Mini-ITX to E-ATX – including models with Back Connect like ASUS BTF, MSI Project Zero, and GIGABYTE Project STEALTH. This keeps the interior especially tidy. Modular I/O panel Evolv X2 Matrix Front The I/O panel is located at the bottom side, allowing the case to fit optimally on your desk and giving you convenient access to the ports. | 11 | 183,15 € +0,30 € | Vaata | ||
Korpus PHANTEKS XT View Matrix Mid-Tower E-ATX PC Case, Glass, Matrix LED, Black Mid-tower with panoramic view, supports GPUs up to 415 mm, CPU coolers up to 184 mm, and motherboards up to E-ATX, featuring a back-connect design With the Phanteks XT View Matrix, you can build a tidy and well-thought-out gaming PC. The case features two large tempered glass panels without a center bar, giving you an unobstructed view of your hardware. It supports current components such as E-ATX motherboards, large graphics cards, and offers plenty of options for fans and radiators. Perfect for anyone seeking a clean setup: boards with rear connectors like ASUS BTF, MSI Project Zero, or GIGABYTE Project STEALTH fit perfectly. The highlight is the integrated matrix display with 600 LEDs, which can be customized in many ways. Plenty of space for high-end hardware: Supports Mini-ITX to E-ATX Generous GPU compatibility: Graphics cards up to 415 mm in length Strong airflow: Up to nine fans and three radiators Panoramic view: Large glass surfaces without obstructive bars 600-LED matrix: Displays, effects, and animations possible Phanteks XT View Matrix: Made for current gaming hardware The XT View Matrix PC case offers plenty of room for your ideal build: Mini-ITX to E-ATX boards fit easily, including motherboards with rear connectors. The 184 mm CPU cooler height allows the use of large air coolers. Thanks to seven PCIe slots and 415 mm of space for graphics cards, you can install even the largest GPUs without any issues. A clear look through glass and clean cable management The glass front and glass side are completely free from bars, providing you with a 270-degree view of your hardware. Smart cable management makes it easy to hide all necessary cables, ensuring unobstructed airflow and a stunningly clean look. A standout feature is the integrated LED panel with 600 LEDs. Hidden behind a fabric surface, it displays system information, time, text, or animations, giving your PC a personalized touch. Great flexibility for fans and radiators You can install up to nine 120 mm fans and three radiators. Whether you prefer air or water cooling, you can design your system exactly as needed. Strong cooling, perfect for high-performance hardware Top: three 120 mm fans or two 140 mm fans / radiator up to 360 mm Side: two 120 mm fans or 240 mm radiator (requires vertical GPU) PSU chamber: three 120 mm fans for direct GPU ventilation Rear: 120 mm radiator or 120/140 mm fan This setup keeps your PC stable even under heavy load – whether cooled by air or water. NEXLINQ: Easy control for cooling & lighting The XT View Matrix is part of the Phanteks NEXLINQ system. With this system, you connect fans, coolers, and RGB lighting to a hub and conveniently control everything via software. You can set automatic or custom fan curves and adjust your lighting colors – for quiet operation and a cohesive look. Mid-tower supporting back-connect motherboards The case supports motherboards from Mini-ITX to E-ATX, including models with back-connect such as ASUS BTF, MSI Project Zero, and GIGABYTE Project STEALTH. This keeps the interior especially tidy. Modular I/O panel The I/O panel is located on top of the case. This allows the case to fit perfectly on your desk and gives you easy access to the ports. | 11 | 112,80 € +0,20 € | Vaata | ||
Korpus PHANTEKS XT View Matrix Mid-Tower E-ATX PC Case, Glass, Matrix LED, White Mid-tower with panoramic view, supports GPUs up to 415 mm, CPU coolers up to 184 mm, compatible with motherboards up to E-ATX, featuring a back-connect design. With the Phanteks XT View Matrix, you can build a tidy, well-designed gaming PC. The case features two large tempered glass panels without a centre bar, offering an unobstructed view of your hardware. It supports modern components, such as E-ATX motherboards, large graphics cards, and a variety of fan and radiator options. Ideal for those seeking a clean setup: motherboards with rear connectors like ASUS BTF, MSI Project Zero, or GIGABYTE Project STEALTH are a perfect fit. The highlight is the integrated matrix display with 600 LEDs, which can be customised in many ways. Plenty of space for high-end hardware: Supports Mini-ITX to E-ATX Generous GPU compatibility: Graphics cards up to 415 mm in length Strong airflow: Up to nine fans and three radiators Panoramic view: Large glass surfaces without distracting bars 600-LED matrix: Displays, effects, and animations possible Phanteks XT View Matrix: Made for current gaming hardware The XT View Matrix PC case offers ample room for your dream setup: Mini-ITX to E-ATX boards fit easily inside, including motherboards with rear connectors. The 184 mm CPU cooler clearance allows for large air coolers. With seven PCIe slots and 415 mm of space for graphics cards, even large GPUs can be installed without any issues. A clear look through glass and clean cable management The glass front and side are completely frameless, providing a 270-degree view of your hardware. Smart cable management allows you to easily conceal all necessary cables, ensuring optimal airflow and a truly clean look. A special highlight is the integrated LED panel with 600 LEDs. Hidden behind a fabric surface, it displays system information, time, text, or animations, giving your PC a personalised touch. Great flexibility for fans and radiators You can install up to nine 120 mm fans and three radiators. Whether you prefer air or water cooling, your system can be tailored exactly to your needs. Strong cooling, perfect for high-performance hardware Top: Three 120 mm fans or two 140 mm fans / radiator up to 360 mm Side: Two 120 mm fans or 240 mm radiator (requires vertical GPU) PSU chamber: Three 120 mm fans for direct GPU ventilation Rear: 120 mm radiator or 120/140 mm fan This keeps your PC stable even under heavy load – whether using air or water cooling. NEXLINQ: Easy control for cooling & lighting The XT View Matrix is part of the Phanteks NEXLINQ system. With this, you can connect fans, coolers, and RGB lighting to a hub and conveniently control everything via software. Set automatic or custom fan curves and adjust your lighting colors – for quiet operation and a seamless appearance. Mid-tower with support for back-connect motherboards Additionally, motherboards from Mini-ITX to E-ATX – including models with back-connect such as ASUS BTF, MSI Project Zero, and GIGABYTE Project STEALTH are supported. This keeps the interior especially tidy. Modular I/O panel The I/O panel is located on the top of the case, allowing for perfect placement on your desk and providing easy access to ports. | 11 | 116,26 € | Vaata | ||
Korpus APNX V2 black case, 3x tempered glass panels Das APNX V2 ist ein Premium-PC-Gehäuse, das für hervorragende Kühlung, elegante Ästhetik und Anpassungsfähigkeit entwickelt wurde. Seine drei abnehmbaren Hartglasplatten bieten einen rahmenlosen Panoramablick, während das X-Pand Flow Design die Gesamtluftströmungsdynamik erheblich verbessert. Mit Unterstützung für bis zu 10 Lüfter, 360-mm-Kühler und zwei 16-cm-Lüfter an der Unterseite sorgt es für eine erstklassige Wärmeleistung. V2 unterstützt gängige Mainboards mit Reverse-Anschluss für eine übersichtlichere Kabelverwaltung. Funktionen wie eine GPU-Halterung, eine abnehmbare Motherboard-Kabelabdeckung und ein austauschbares PSU/HDD-Fach verbessern die Haltbarkeit und Anpassungsmöglichkeiten. Mit vertikaler oder horizontaler 360-mm-AIO-Montage und Unterstützung für den APNX 10-Port-Lüfter-Hub bietet das APNX V2 effiziente Kühlung und mühelose Anpassungsmöglichkeiten für Hochleistungs-Builds. | 11 | 117,19 € | Vaata | ||
Korpus Aerocool P300D-G-BK-v1 PC case black tempered glass x2 The AeroCool P300D combines a sleek design with strong functionality for gamers and creatives. Thanks to its full glass side panels, this mini-tower case showcases your hardware perfectly—ideal for RGB lighting and high-performance components. The front and side panels made from tempered glass provide a crystal-clear view of your components. Display your high-end hardware in stunning detail and enjoy a premium look from any angle. With support for up to nine 120 mm fans, the P300D offers comprehensive cooling performance, even for the most demanding systems. Low temperatures and high performance are ensured even during intensive use or long gaming sessions. Support for graphics cards up to 418 mm in length ensures the case is ready for the most powerful GPUs, whether you're gaming, editing, or rendering 3D content. Smart maintenance features include easily removable dust filters for quick cleaning and improved airflow—keeping your system running optimally and preventing dust buildup. | 11 | 43,66 € | Vaata | ||
Korpus Aerocool B509A Flow-G-BK-v1 PC case with power supply Aero 650 black tempered glass Das AeroCool B509A Flow ist ein Midi-Tower-Gehäuse, das hohe Leistung mit elegantem, funktionalem Design vereint. Die Frontblende aus Mesh optimiert den Luftstrom und setzt Ihre Komponenten perfekt in Szene. Dank Unterstützung für Grafikkarten bis zu 340 mm und Wasserkühlungen bis zu 360 mm ist es bestens für High-End-Hardware gerüstet. Ausgestattet mit acht Lüfterplätzen, magnetischen Staubfiltern und einer Seitenwand aus gehärtetem Glas hält das B509A Flow Ihr System kühl, sauber und optisch ansprechend. | 11 | 100,38 € | Vaata | ||
10 | 39,99 € | Vaata | |||
10 | 150,89 € | Vaata | |||
Korpus Inter-Tech IT-607 - Tower - Mini-ITX - without power supply - USB/Audio (88881223) KujutegurLauaarvutiTüüpPCEmaplaadi toetatud kujuteguridMicro-ATX,Mini-ITXToote värvMustAknagaEi2,5" salvede arv2Sisemiste 3,5" salvede arv2Väliste 5,25" kettalahtrite arv1Kaasas toiteplokkEiUSB 2.0 portide arv1USB 3.0 (3.1 Gen 1) A-tüüpi portide hulk1AudiosisendJahAudioväljundJahMaksimaalne esiventilaatorite arv1Installitud ülemised ventilaatorid1x 80 mmToetatud ülemiste ventilaatorite läbimõõt80 mmToetatud kõvakettasuurused2.5,3.5"Kombineeritud HDD/SSD sahtelJahIntegreeritud kaardilugejaJahÜhilduvad mälukaardidMMC,SDLähtestusnuppJahLaius100 mmSügavus415 mmKõrgus307 mmKaal2,42 kgKaablid kaasa arvatudVahelduvvoolKasutusjuhendJahPakendi laius155 mmPakendi sügavus460 mmPakendi kõrgus350 mmPakendi kaal3,02 kg | 10 | 42,90 € +0,05 € | Vaata | ||
Korpus Chieftec Scorpion 2 RGB Black glass window Internal 2x 2.5 "/3.5", Front I / O 2x USB-A 3.0, 1x USB-A 2.0, 1x headphones, 1x microphone, PCI slots 7, Fan (front) 3x 120mm (RGB illuminated), Fan (rear) 1x 120mm (RGB illuminated), Fan (top) 2x 120mm (optional), Radiator sizes 240mm front, 240mm top, Motherboard up to ATX, Power supply ATX (max 200mm deep), Power supply position below, CPU cooler up to max. 166mm height, Graphic cards up to max. 349mm, Color black, black painted inside, Dimensions (WxHxD) 203x505x436mm, Volume 44.70l, Weight 6.90kg, Special features Cable management, glass viewing window, GL-02B-OP | 1-3 tp | 10 | 53,20 € +2,30 € | Vaata | |
Korpus Inter-Tech X-608 Infinity Micro with 1x120mm RGB-cooler (88881315) Inter-Tech korpus X-608 Infinity Micro mATX | 10 | 94,70 € | Vaata | ||
Korpus Inter-Tech Mini ITX SC-2100 black (88887285) Inter-Tech korpus SC-2100 must Mini ITX | Storage-korpus | 10 | 79,95 € +0,05 € | Vaata | ||
10 | 78,40 € +0,15 € | Vaata | |||
10 | 69,20 € +0,10 € | Vaata | |||
Korpus Thermaltake Commander C31 ARGB Snow Edition Commander C31 TG Snow ARGB Edition, Middle tower, 3x 3.5/2.5" , 2x 6.35 cm (2.5" ) , 2x USB 3.0, RGB LED, 462x233x507 mm, white | 10 | 134,35 € | Vaata | ||
10 | 82,35 € | Vaata | |||
Korpus Aerocool Mecha ARGB Glass Window Internal 1x 2.5 "/3.5" (transverse, hard disk cage), 1x 3.5 "(transverse, hard disk cage), 2x 2.5", Front I / O 2x USB-A 3.0, 1x microphone, 1x headphones, PCI slots 7, Fan (front) 2x 140mm (optional), Fan (rear) 1x 120mm (RGB illuminated), Fan (top) 1x 120mm (optional), Radiator sizes 120 / 240mm front, 120mm rear, Mainboard to ATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 159mm height, Graphics cards max. 302mm (without radiator), Color black, inside black, Lighting RGB header 3-pin ARGB (+ 5V / DATA / GND), integrated LED control, integrated RGB-LED lighting, illuminated fans, Dimensions (WxHxD) 205x442x370mm, Volume 33.53l, Enclosure type midi tower Special features Cable management, dust filter, window made of glass, AEROPGSMECHA-G-BK-V2 | 10 | 43,95 € | Vaata | ||
Korpus Aerocool Quantum Mesh v3 Midi-Tower, RGB, Tempered Glass - schwarz Aerocool korpus Quantum Mesh v3 TG must ATX | ACCM-PV31133.11 | 10 | 59,15 € | Vaata | ||
10 | 74,55 € +0,10 € | Vaata | |||
Korpus MSI Case|MSI|MAG Forge 100R|MidiTower|Not included|ATX|MicroATX|MiniITX|Colour Black|MAGFORGE100R I/O PORTS: 2 x USB 3.2 Gen1 Type-A / 1 x HD Audio / 1 x Mic DRIVER BAYS: 2 x 3.5” (compatible with 2.5”) + 3 x 2.5” CASE EXPANSION SLOTS: 7 MAXIMUM GPU LENGTH: 330 mm MAXIMUM CPU COOLER LENGTH: 160 mm POWER SUPPLY: Standard ATX 160 mm, max to 200 mm (without 3.5” HDD case installed) COOLING LAYOUT: Front - Up to 3 x 120 mm / 2 x 140 mm Top - Up to 2 x 120 mm / 2 x 140 mm Rear - Up to 1 x 120 mm PRE-INSTALL FAN: Front - 2 x 120 mm addressable RGB LED Fan included Rear - 1 x 120 mm System Fan included RADIATOR LAYOUT: Front- Up to 240 mm Top - Up to 240 mm Rear- Up to 120 mm FORM FACTOR: Mid-Tower SUPPORT MB FORM FACTOR: ATX / mATX / Mini-ITX DIMENSION: 421(D) x 210(W) x 499(H) mm 17.05(D) x 8.27(W) x 19.65(H) inch WEIGHT: 5.64 kg | 1-3 tp | 10 | 54,47 € +0,03 € | Vaata | |
Korpus Chenbro Micom Chenbro RM42300F1, rack case (black / silver, USB 3.0) (RM42300F1-USB 3.0) Chenbro korpus 19" 4HE RM42300 U3 ATX | One Door | 10 | 216,39 € | Vaata | ||
Korpus Cooler Master Go CoolerMaster Midi Elite 500 with ODD/Steel Panel (E500-KN5N-S00) Cooler Master Elite 500 ODD. Kujutegur: Midi Tower, Tüüp: PC, Toote värv: Must. Toiteploki asukoht: Põhi, Toetatud elektritoite tarne vormi faktorid: ATX. Toetatud esiventilaatorite läbimõõt: 120 mm, Installitud tagaventilaatorid: ... | 10 | 55,01 € | Vaata | ||
Korpus Inter-Tech Gaming case IT-3303 Hornet.1X120mm ARGB fans retail (88881340) Inter-Tech korpus IT-3303 HORNET must ATX | 88881340 | 10 | 47,86 € | Vaata | ||
10 | 150,64 € | Vaata | |||
10 | 50,51 € +0,22 € | Vaata | |||
Korpus Aerocool Wave-G-BK-v3 black ATX - ACCM-PV35143.11 Aerocool korpus Wave-G-must-v3 must ATX | ACCM-PV35143.11 | 10 | 52,95 € | Vaata | ||
Korpus Azza mATX Elise 140 mängurile must CSAZ-140 (CSAZ-140) AZZA korpus Elise must mATX | CSAZ-140 | 10 | 62,55 € | Vaata | ||
Korpus Corsair iCUE 5000X RGB QL Mid-Tower ATX White iCUE 5000X RGB QL Edition Mid-Tower ATX Case — True White. No. of drive bays: 4 Dimensions: 521 x 245 x 520 mm Weight: 14.1 | 10 | 172,80 € | Vaata | ||
Korpus MSI Case|MSI|MPG VELOX 100P AIRFLOW|MidiTower|MPGVELOX100PAIRFLOW MSI PC CASES MPG VELOX 100P AIRFLOW | Laos | 10 | 89,57 € +0,07 € | Vaata | |
10 | 62,99 € +0,59 € | Vaata | |||
Korpus Thermaltake Divider 500 TG Snow ARGB Midi Tower Valge Thermaltake korpus Divider 500 TG Snow ARGB White | CA-1T4-00M6WN-01 | 10 | 178,20 € | Vaata | ||
10 | 85,21 € | Vaata | |||


















































