Midi-tower case with four pre-installed D-RGB fans 360mm radiator support at the top for optimal cooling performance Compatible with ASUS BTF and MSI Project Zero motherboards Tempered glass side window for an unobstructed view of your components Glacier One 360M25 Gen2 with powerful pump and RGB lighting Three quiet M25-G2 fans with high static pressure Integrated VRM fan on the pump cover High-quality build and optimized airflow Optimal Cooling Meets Stylish Design The XT Pro Ultra offers space for up to ten fans and supports radiators up to 360mm at the top. With four pre-installed 140mm D-RGB fans, it provides excellent airflow right out of the box. The mesh front panel and tempered glass side panel combine functionality with aesthetics. The Glacier One 360M25 Gen2 AiO cooler delivers excellent cooling performance thanks to its powerful pump and three optimized 120mm PWM fans—ideal for high-end Intel and AMD CPUs. Integrated D-RGB lighting ensures a clean yet spectacular look. Room for High-End Components The XT Pro Ultra provides space for graphics cards up to 415mm in length and CPU coolers up to 184mm in height. The case is also ready for vertical GPU mounting and offers enough space for 2x 3.5" and 5x 2.5" drives. ATX and even E-ATX motherboards fit easily as well. Cable-Friendly, Modern Setup Thanks to support for rear-connector motherboards like ASUS BTF and MSI Project Zero, your system can be especially tidy. The Glacier One 360M25 Gen2 supports you with a single control cable for RGB lighting—for a clean build without cable clutter. Quiet & Powerful: The M25-Gen2 Fans The M25-Gen2 fans are designed for radiators and deliver high cooling performance at an ultra-quiet 35.13 dB(A)—with an airflow of 123.55 m³/h and a static pressure of 2.51 mmH2O. Rubber pads prevent disturbing vibrations and the PWM mode automatically adjusts the speed to requirements. With the Phanteks XT Pro Ultra & Glacier One 360M25 Gen2 bundle, you get a perfectly matched combination of case and water cooling, merging performance, cooling, and design at the highest level.
8x hot-swap bays for 3.5-inch HDDs, 2x internal 2.5-inch slots, compatible with Micro-ATX, lockable mesh front, quiet 120mm fan pre-installedThe SilverStone CS383 is a compact NAS tower case for users who want to operate a powerful and secure storage system in a home or office environment. It combines high storage capacity with reliable cooling and easy maintenance. Up to 8x 3.5-inch HDDs in hot-swap trays – allows quick access and replacement during operation Additional 2x internal 2.5-inch slots – perfect for SSDs or system drives Supports Micro-ATX motherboards – ideal for compact, powerful NAS setups Lockable mesh front protects drives – secures your data against unwanted access Quiet 120mm fan provides efficient cooling – protects hard drives from overheating Compact storage solution with high capacity With eight hot-swap capable 3.5-inch bays, the CS383 offers plenty of space for large amounts of data. Ideal for home servers, backups, or multimedia archives – without relying on a bulky rack. Optimised for NAS systems and quiet operation The thoughtful fan design, featuring a low-noise 120mm model, ensures good air circulation with minimal noise. This keeps the system pleasantly quiet even during continuous operation. Secure access and easy management The lockable mesh front not only protects the drives but also ensures good ventilation. The hot-swap function allows you to easily swap hard drives without shutting down the system.
Professional gaming PC case NOCTIS FLOW RGB X1 NOCTIS FLOW RGB X1 a case designed for maximum airflow During intense gameplay, temperature has a real impact on stability, FPS (Frames Per Second), and the overall performance of your computer.The mesh front panel (dense, breathable mesh) on the NOCTIS FLOW RGB X1 increases airflow, keeping components cool even under heavy load. Four RGB fans included full 4-pin PWM control The set includes four 120 mm RGB (Red Green Blue) fans they not only look modern but are highly functional.Thanks to 4-pin PWM (automatic speed control), the system increases fan speed exactly when your processor or graphics card starts working harder. Enhanced AIO cooling system installation wide compatibility In the NOCTIS FLOW RGB X1 you have complete freedom to install AIO (All in One) water cooling: on the top, front, rear, and most importantly in the dedicated side area next to the motherboard.This allows you to create a setup that best suits your graphics card, processor, and gaming style. NOCTIS FLOW RGB X1 offers extended radiator installation options, including space next to the motherboard. Supported configurations: top: 120 / 240 mm, front: 120 / 240 / 280 / 360 mm, next to the motherboard: 120 / 240 mm, rear: 120 mm. This flexible solution lets you tailor the cooling layout to your specific hardware configuration. Compatibility with large components no upgrade limitations The case supports CPU coolers up to 170 mm, graphics cards up to 350 mm, and power supplies up to 180 mm (or 230 mm after removing the HDD cage).This means you can choose exactly the GPU and cooling system that deliver top performance without worrying if everything will fit. Optimized airflow layout up to 10 fans NOCTIS FLOW RGB X1 lets you configure cooling to match your play style: maximum airflow, maximum silence, perfectly balanced. With 10 potential fan mounting spots, you get full control over your system temperatures. Available positions: 3 × front, 2 × top, 1 × rear, 2 × next to the motherboard, 2 × in the PSU chamber. This layout makes it easy to achieve the optimal balance between cooling and acoustics. Compatibility with ATX / mATX / Mini-ITX motherboards The case supports three popular motherboard standards: ATX (Advanced Technology eXtended) full-size, most expandable, mATX (Micro ATX) compact but still functional, Mini-ITX the smallest, ideal for mini gaming setups. Flexible drive system configuration tailored to the user Customize your storage setup to match your game library and workflow: more SSDs faster loading and system responsiveness, more HDDs more space for projects, recordings, or streamer archives. The choice is yours the case supports both options. NOCTIS FLOW RGB allows mounting: 2 × HDD 3.5 + 2 × SSD 2.5or 1 × HDD 3.5 + 3 × SSD 2.5. A practical solution for expanding storage space for games, video materials, or fast system drives. Case protected with filters and designed for clean airflow The case maintains high airflow while protecting components with two dust filters (top + bottom), helping extend component longevity. The mesh front panel is complemented by additional dust filters: top, PSU chamber. As a result, the inside of the PC stays clean and components remain stable over time. Ergonomic I/O panel quick access to essential ports The top panel includes: USB-A 3.1 Gen 1 (Universal Serial Bus Type A, 3.1 Gen 1 standard) 2 × USB-A 2.0 HD Audio (High Definition Audio) The ports are easily accessible, making it convenient to connect flash drives, accessories, or headphones without reaching behind the PC. NOCTIS FLOW RGB X1 a case for users who need efficient cooling and full functionality A solid, well-designed structure with high airflow, broad compatibility, and a modern ventilation layout.An ideal choice for gaming PCs, streaming setups, and powerful workstations.
Professional gaming PC case NOCTIS GLASS RGB X1 NOCTIS GLASS RGB X1 a case that combines gaming style with stable performance NOCTIS GLASS RGB X1 is a case designed for gamers who value not only high functionality but also impressive, modern aesthetics.The front panel made entirely of tempered glass highlights the RGB (Red Green Blue) lighting of the fans and creates a minimalist, clean design. Four RGB fans included full 4-pin PWM control The set includes four 120 mm RGB (Red Green Blue) fans they not only look modern but are also highly functional.Thanks to 4-pin PWM (automatic speed control), the system increases fan speed exactly when your processor or graphics card starts working harder. Enhanced AIO cooling system installation wide compatibility In NOCTIS GLASS RGB X1 you have complete freedom to install AIO (All in One) water cooling: on the top, front, rear, and most importantly in the dedicated zone next to the motherboard.This allows you to prepare a setup that best suits your graphics card, processor, and gaming style. NOCTIS GLASS RGB X1 offers extended radiator installation options, including space next to the motherboard. Supported configurations: top: 120 / 240 mm front: 120 / 240 / 280 / 360 mm next to the motherboard: 120 / 240 mm rear: 120 mm This flexible solution lets you tailor the cooling system to your specific hardware configuration. Compatibility with large components no upgrade limitations The case supports CPU coolers up to 170 mm, graphics cards up to 350 mm, and power supplies up to 180 mm (or 230 mm after removing the HDD cage).This means you can choose exactly the GPU and cooling system that delivers the best performance without worrying about fitting issues. Optimized airflow layout up to 10 fans NOCTIS GLASS RGB X1 allows you to configure cooling that fits your style of gameplay: maximum airflow maximum silence perfectly balanced operation With up to 10 fan mounting spots, you have full control over your temperature management. Available positions: 3 × front 2 × top 1 × rear 2 × next to the motherboard 2 × in the PSU chamber This layout makes it easy to achieve the perfect balance between cooling efficiency and acoustic comfort. Compatibility with ATX / mATX / Mini-ITX motherboards The case supports three popular motherboard formats: ATX (Advanced Technology eXtended) full-size, most expandable mATX (Micro ATX) compact but still highly functional Mini-ITX smallest, ideal for compact gaming builds Flexible drive system configuration tailored to the user Adapt your storage configuration to your game library and workflow: more SSDs faster load times and system responsiveness more HDDs more space for projects, recordings, or streaming archives The choice is yours the case supports both setups. NOCTIS GLASS RGB allows installing: 2 × HDD 3.5 + 2 × SSD 2.5or 1 × HDD 3.5 + 3 × SSD 2.5 A practical solution to expand storage for games, video materials, or fast system drives. Case protected with filters and designed for clean airflow The case maintains high airflow while protecting components with two dust filters (top + bottom), helping extend the lifespan of your hardware. The tempered-glass front panel is complemented by additional dust filters: top PSU chamber As a result, the inside of your PC stays clean, and components run longer and more reliably. Ergonomic I/O panel quick access to essential ports The top panel includes: USB-A 3.1 Gen 1 2 × USB-A 2.0 HD Audio The ports are easily accessible, making it convenient to connect USB drives, accessories, or headphones without reaching behind the computer.
Expand your wheelbase with a 5-inch display Shows your vehicle's telemetry data in real time RGB LEDs indicate the perfect shift point 60 Hz refresh rate and a resolution of 1,280 x 720 pixels Free configuration via MOZA Pit House software Easy installation thanks to pre-drilled mounting points Get all information about the race and your vehicle at a glance The MOZA CM2 Racing Dash is the latest addition for sim racing enthusiasts and the direct successor to the popular MOZA CM Racing Dash. It features a customizable dashboard UI system, allowing you to adjust the display with the MOZA Pit House software according to your individual preferences. Shift indicators and flag lights ensure a realistic racing experience. The 720p HD touchscreen display offers clear and vivid graphics, while the 60 Hz refresh rate ensures smooth and stutter-free visuals. The open ecosystem also allows seamless integration with various sim racing platforms. The robust aluminum alloy housing and the sleek, ultra-thin design give the CM2 both durability and a modern aesthetic. In addition, the display viewing angle can be adjusted for optimal comfort.
Ultrakompaktes Thin-Mini-ITX-Gehäuse, aus schwarzem Aluminium gefertigt, OEM-Version ohne Logo, extrem flach & passiv kühlend, zwei 2,5-Zoll-Slots, je zwei USB-3.0/2.0-Ports
After introducing the RAVEN Z series in 2014 to great acclaim with the revolutionary RVZ01, the RAVEN team has created another segment defining design in the RVZ02. With a volume of only 12 liters, this case is not only slimmer but is actually easier to assemble compared to the RVZ01 or any other slim case before it. Similar to many SilverStone small form factor cases, there is plenty of room for a powerful graphics card up to 13 inches in length available while tool-less drive cages have been implemented to make assembly quicker than ever. With clever space utilization and engineering, two major heat sources of a PC are separated via the chassis’ main chamber so CPU and graphics card can each have their own airflow path. Despite its diminutive size, the RVZ02 is a remarkably versatile case that can be used anywhere from being a compact desktop workstation (in vertical orientation) to a living console or HTPC (in horizontal orientation), making it truly perfect for just about any slim PC build.- Highest performance capability in super slim form factor- Support graphics card up to 13 inches- Mini-ITX motherboard & SFX PSU compatible- Independent expansion slot design for easy assembly- Tool-less drive cage design- Fits in nearly any environment with horizontal or vertical orientationKujutegurSmall Form Factor (SFF)TüüpPCMaterjalPlast, TerasEmaplaadi toetatud kujuteguridMini-ITXToote värvMust, HõbeAknagaJah2,5" salvede arv2SobilikKodu/kontorMahutavus12 lLaienduspesade arv2CPU jahuti maksimaalne kõrgus5,8 cmGraafikakaardi maksimaalne pikkus33 cmToetatud elektritoite tarne vormi faktoridSFXToiteallikate arv1USB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahToetatud kõvakettasuurused2.5,3.5"Toetatud kõvaketaste arv2Laius380 mmSügavus370 mmKõrgus87 mmKaal3,3 kg
Ultrakompaktes Thin-Mini-ITX-Gehäuse, mit Rackmount-Frontblende, aus schwarzem Aluminium gefertigt, OEM-Version ohne Logo, extrem flach & passiv kühlend, zwei 2,5-Zoll-Slots, je zwei USB-3.0/2.0-Ports
No. of drive bays: 8 Weight: 6.52 Other features: CPU cooler height limitation: 170mm PSD length limitation: 170mm VGA length limitation: 260mm (With radiator on the right side) 366mm (Without radiator on the right side) Cooling System Front (Intake): 120 x 120 x 25mm Addressable RGB fan (1000rpm, 27.2 dBA) x 3 Rear (exhaust): 120 x 120 x 25 mm fan (1000rpm, 26 dBA) x 1 Fan Support Front: 3 x 120mm Top: 2 x 120mm, 1 x 140mm Rear: 1 x 120mm Right Side(In front of M/B Tray): 2 x 120 mm Bottom(On the power cover): 2 x 120 mm
No. of drive bays: 6 Dimensions: 510 x 227 x 525 mm Weight: 9.3 Other features: Fan options: Front: 3 x 120 or 3 x 140 mm (3 x 120mm included) Top: 3 x 120mm or 2 x 140 mm Rear: 1 x 120 or 1 x 140 mm (1 x 120mm ARGB LED included)
Dimensions: 270 x 500 x 465 mm (W x H x D) Weight: approx.7.8 kg Material: steel, tempered glass, plastic Color: Black Form factor: ATX, Micro-ATX, Mini-ITX Total fans possible: 3x 120 mm, 2x 140 mm or 2x 200 mm (front) 2x 120 mm or 2x 140 mm (cover) 1x 120 mm (back) Pre-installed: 2x 200 mm (front) 1x 120 mm (rear) Radiator mountings: 1x 240/280/360 mm (front) 1x 240/280 mm (lid) 1x 120 mm (rear) Filter: cover, bottom Drive bays: 2x 3.5 / 2.5 inches (internal) + 6x 2.5 inches (internal) Power supply: 1x standard ATX Expansion slots: 7 I / O panel: 1x USB 3.0 type A, 2x USB 2.0 1x audio in 1x audio out 1x RGB-LED control 1x reset switch 1x power switch Maximum graphics card length: 320 mm Maximum CPU cooler height: 166 mm
Gross depth (mm): 280.00 mm Gross height (mm): 520.00 mm Gross weight: 10.70 kg Gross width (mm): 530.00 mm Net weight: 9.70 kg Packing quantity: 1.00 pc(s) Tare weight (kg): 1.00 kg Volume (m3): 0.08 m³ Embeeded battery: No WEEE tax: No Paper/Pasteboard: 1000 g Producer product name: MATREXX 50 ADD RGB 4F Power supply included: No Form factor: E-ATX Side window: Yes
