Darkflash DRX90 Mesh computer case (white)If you're looking for a case that combines modern design with functionality and flexibility, the DarkFlash DRX90 Mesh is an excellent choice. Created for high demands, it offers excellent ventilation, support for modern components, and an aesthetically pleasing finish that will perfectly complement any computer set-up.Magnetic front panelThe darkFlash DRX90 Mesh case is distinguished by its magnetic front panel. The mesh from which it is made ensures maximum ventilation, especially with demanding components that generate a lot of heat. Removal of the panel is simple and tool-free, thanks to a hinged "clamshell" mechanism.Spacious and compatibleThe DRX90 Mesh supports ATX, Micro-ATX and ITX motherboards, making it a versatile choice for various configurations. The interior allows the installation of graphics cards with a maximum length of 395 mm and CPU coolers up to 185 mm high. With seven PCI slots, it allows the installation of a wide range of expansion cards. The DRX90 Mesh also provides space for two 2.5"/3.5" drives, as well as an additional 2.5" SSD bay. This allows you to customize your configuration to meet changing requirements, while keeping the inside of the case tidy.Advanced cooling optionsThe DRX90 Mesh provides support for up to 12 120mm fans or 6 140mm fans, offering versatile cooling configuration options. You can mount up to 360 mm heatsinks on the top and front of the case, as well as a 120 mm heatsink on the back - an ideal option for water cooling. With adequate airflow, you'll keep temperatures low even when running demanding software.Graphics card holderThe built-in graphics card holder is a practical addition that ensures the stability of heavy GPU models. The adjustable mechanism allows you to adjust the height to accommodate different card thicknesses, which reduces the risk of damage and improves the aesthetics of the installation.Tidy and dust-freeThe case has been designed with neat cable routing in mind. Rubber cable grommets facilitate organization by minimizing the visibility of cables. The spaciousness of the interior allows for unobstructed cable routing while ensuring unobstructed airflow. What's more, the DRX90 Mesh is equipped with dust caps to protect I/O ports from dirt, as well as dust filters on the front, top and bottom panels. This will keep the inside of your computer clean and efficient for a long time.I/O ports always at handThe darkFlash DRX90 Mesh chassis offers a conveniently located I/O panel with a USB-C port, USB 3.0, USB 2.0, HD Audio connector and Power and Reset button. It's ideal for those who appreciate easy access to the most important ports.Durable construction and modern designThe case is made of 0.6 mm thick steel and tempered glass. A reinforced base with trapezoidal feet reduces vibrations and increases the stability of the case. The minimalist industrial look of the mesh front panel blends perfectly with modern gaming PC interiors.IncludedCaseDust caps (USB-C, HD Audio)Set of mounting screwsUser manual ManufacturerDarkflashModelDRX90 MeshHousing typeMid TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5'HDD x2, 2.5'SSD x1Expansion card slots7Max PSU length250 mmMax length of graphics card395 mmMax height of CPU cooler185 mmMax number of fans12Fan mounting optionsTop: 120 mm x3/140 mm x2; Front: 120 mm x3/140 mm x3; Rear: 120 mm x1/140 mm x1; Bottom: 120 mm x3Water cooling mounting optionsTop: 240, 280, 360 mm; Side: 120 mmNumber of fans installedFront: 3; Rear: 1Type of fansC7, RGB, 120 mmButtons and controlsPower, Reset, LED, fan speed controlConnectorsUSB3.0 x1, USB2.0 x1, Type-C x1, HD AudioMaterial0.8 mm SPCCColorWhiteHeight460 mmWidth230 mmDepth465 mmWeight8.2 kg
The LINDY LAN port blocker is a practical solution designed to enhance the security and integrity of your network. Manufactured by Lindy, known for cable management and cabling accessories, this product is specifically designed to block unused RJ-45 LAN ports, preventing unauthorized access and potential network breaches. Made from high-quality ABS plastic, it ensures durability and reliability. Furthermore, it meets several compliance standards, including California 65, REACH, and RoHS, making it a responsible choice for organizations concerned with environmental and safety regulations. Packaged in a polybag, it also supports eco-friendly initiatives. Whether securing a small office network or a large data center, the LINDY LAN port blocker offers an effective and straightforward solution.
XPG BATTLECRUISER II ST. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Frontventiler installeret: 3x 120 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 506 mm, Højde: 550 mm. Pakkebredde: 339 mm, Pakkedybde: 643 mm, Pakkehøjde: 615 mm
Lenkrad-Basis für Racing-Simulatoren, realistische Bewegungen durch 25 Nm starken Motor, verzögerungsfreie Wiedergabe, Quick-Release für Lenkräder, fast vollständig aus Metall
The Alphacool ES 2U Reservoir is a versatile reservoir optimized for use in 2U server cases. The quick-release fasteners on the front ensure quick and easy maintenance. The cooling system can be continuously monitored using the integrated flow and temperature sensors. The illuminated window makes the fill level easy to read at any time.Optimized for serversThe Alphacool All-in-One reservoir has been specially developed for 2U server cases. The device has a compact design to take up as little space as possible in the server case. Due to the quick-release fasteners on the front, the cooling system can be filled and vented quickly and easily. The illuminated window makes it possible to check the fill level in the system at any time. The Alphacool ES 2U reservoir is compatible with pumps using D5 format such as the Alphacool VPP Apex.Integrated sensorsThe reservoir has a temperature sensor that covers a measuring range of -40 to 125°C and is connected to the mainboard via a 2-pin connector. In addition, a flow sensor, which is connected via a 3-pin connector, enables continuous monitoring of the water flow in the cooling system. Technical dataDimensions (L x W x H) (without pump)99.66 x 146.00 x 83.90mmMaterialMetal, acetalWeight1500gThreads (front side)2x quick-release fastener G1/4”Threads (rear side)1x G1/4" In | 1x G1/4" OutConnection flow sensor3PinConnection temperature sensor2PinConnection aRGB3-Pin 5VPump compatibilityD5/VPPMax working temperature60 °CPressure tested0.8 barColorblack
