Internal 2x 2.5 "/3.5" (transverse, hard disk cage), 2x 2.5 ", Front I / O 1x USB-A 3.0, 2x USB-A 2.0, 1x microphone, 1x headphone, PCI slots 4, Fan (front) 2x 140mm (optional), Fan (rear) 1x 120mm, 1000rpm, 16dB (A), Fan (top) 1x 200mm (optional) or 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 330mm, Color black, inside black, Lighting integrated LED control, integrated RGB LED lighting, Dimensions (WxHxD) 220x411x441mm, Volume 39.88l, Weight 6.10kg, Housing type mini tower, Special features dust filter, viewing window made of glass, CA-1Q9-00S1WN-00
Gembird FORNAX-960B - Torn - micro ATX Product Type: System cabinet Form Factor: Torn värv: must I/O Ühendusi: 2 x USB 3.0 1 x microphone 1 x kõrvaklapid Supported Motherboards: microATX, ITX System Cabinet Features: Translucent side panel Power Device: No toiteplokk Specification Compliance: ATX / PS/2 mõõtmed (WxDxH): 20 cm x 32.5 cm x 35.3 cm kaal: 2.6 kg
Product kirjeldus: AORUS C700 GLASS - FT - ATX Product Type: System cabinet Form Factor: Full Torn värv: must I/O Ühendusi: 1 x USB 3.1 Gen 2 4 x USB 3.0 1 x HDMI 1 x microphone 1 x kõrvaklapid Supported Motherboards: ATX, microATX, Mini-ITX, Extended ATX System Cabinet Features: Supports Kuni 360 mm radiator in front panel, toetab Kuni 140 mm radiator in rear panel, 2 tempered glass side panels, ARGB controller, RGB Fusion 2.0, toetab Kuni 420 mm radiator in top panel Power Device: No toiteplokk Specification Compliance: ATX mõõtmed (WxDxH): 30.1 cm x 71.4 cm x 67.1 cm kaal: 19.2 kg
No. of drive bays: 6 MOLEX power connectors: 0 Floppy power connectors: 0 SATA power connectors: 0 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 0 Number of power supply connector 4+4-pin 12V: 0 8-pin 12V power connectors: 0 Weight: 7.7
CORSAIR 3000D RGB mid-tower Tempered Glass White The CORSAIR 3000D RGB AIRFLOW mid-tower ATX case features intensive airflow powered by three high-performance factory-mounted CORSAIR AR120 RGB fans for superior cooling and fantastic lighting effects. The addition of a tempered glass side panel turns your PC into a state-of-the-art computer technology display. The intelligently laid out interior holds up to 8 x 120mm fans or 4 x 140mm fans. With room for radiators up to 360mm in size, support for 3.5" and 2.5" drives, and support for four-slot graphics cards up to 360mm in length, you can create a high-performance system. The front I/O panel has two USB 3.2 Type A ports and a microphone and headphone jack. Outstanding Cooling Capabilities: Spacious interior holds up to 8 x 120mm cooling fans or 4 x 140mm fans with multiple heatsinks including one 360mm front and one 280mm on top (depending on the height of the memory modules) RAM). A complete mid-tower package: A mid-tower ATX case with a sleek, high-airflow design and three pre-installed CORSAIR AR120 RGB fans for superior cooling and compelling lighting effects. Dedicated graphics card cooling: The case accommodates the latest graphics cards and has two additional 120mm fan mounts on the PSU shroud that allow you to install fans directing the airflow directly to the graphics card. Three-slot graphics support: For an advanced, high-performance computing setup, you can freely install a three-slot graphics card up to 360mm in length into the chassis. Optimized front panel for intensive air circulation: The optimized steel front panel provides powerful airflow in the system for maximum cooling. Tempered glass side panel: Show off your internal components in elegant style All the storage you need: Holds up to 2 SSDs and 2 HDDs.
Spacious Micro-ATX case in white, for motherboards up to Micro-ATX, side panel and front made of tempered glass, up to 8x 120-mm fans possible, 2x radiators up to 360 mm possible, graphics cards up to 400 mm in length, dual-chamber design.
CTE T500 TG ARGB Snow Full Tower Chassis The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support up to a 420mm AIO radiator at the front and a maximum 360mm AIO radiator at the rear. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE T500 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE T500 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. Experience the perfect combination of design and performance with our CTE T500 The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support a maximum of a 420mm AIO radiator at the front and a maximum of two 360mm AIO radiators at the front and rear. There's plenty of room to install cooling components, including front and rear fan brackets, top and right fan vents, bottom fan vent, and shroud vent, and the case can accommodate up to eleven 140mm/120mm fans. Other cool details include removable filters, pump and tank support, and Velcro straps for easy cable management. Our CTE T500 Snow is the perfect choice whether you're looking for a custom liquid cooling setup or a dual AIO setup! Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE T500 TG ARGB's versatile interior features two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Support for dual 360mm radiators Our CTE T500 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, allowing users to install up to two 360mm radiators simultaneously at the front and rear. To ensure AIO compatibility, users can install up to one 420mm AIO radiator on the front and up to two 360mm AIO radiator on the front and rear. All your dream cooling components will fit! The CTE T500 Full Tower case has a huge fan and cooler installation capacity: up to eleven 140 mm/120 mm fans and 360 mm AIO coolers in various locations (420 mm AIO cooler at the front). Moreover, equipped front and rear fan brackets and mounting locations on the top, right side and lid ensure easy installation of all desired cooling components. Rock your world with three pre-installed white 140mm CT140 ARGB fans The CTE T500 TG ARGB Snow Full Tower case is equipped with three white 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. We've tested everything, so you don't have to At Thermaltake, we always stress test our products under harsh conditions to ensure product quality. CTE T500 TG ARGB Snow Full Tower Chassis products have been tested at 100% full load for 30 minutes, with the highest-end CPU, GPU and motherboard at the time of testing, compared to a consumer-style configuration, which allowed us to test how the chassis handles in real-world situations.
The Chieftec Apex Q tower chassis strikes a balance between cooling efficiency, performance, and quiet operation. Designed for both enthusiasts and professionals, this case is compatible with a broad spectrum of motherboards from ATX to Mini-ITX, ensuring versatility for various system configurations. Its front panel offers essential connectivity options, including USB 3.0 and USB-C 3.2 Gen 2 ports, along with audio in/out jacks, to accommodate all your peripheral needs. The Apex Q is engineered for effective cooling, with ample support for multiple fans and radiators to maintain optimal system temperatures. Additionally, its sound dampening panels help minimize noise, providing a more focused environment for gaming and professional tasks. Capable of housing high-end components with ease, the Apex Q demonstrates Chieftec's commitment to quality and thoughtful design.
