MÕÕTMED: 215 x 473.5 x 454 EMAPLAADI TUGI: Mini ITX; Micro ATX; ATX GRAAFIKAKAARDI PIKKUS KUNI: 405 mm PROTSESSORI ÕHKJAHUTI KÕRGUS KUNI: 170 mm TOITEPLOKI ÜHILDUVUS: ATX; 17 cm KAABLITELE RUUM: Olemas KAAL: 7.2 kg Ühenduvus I/O PANEEL: 1 x headphones; 2 x USB 3.0; 1x microphone PCI PESASID KUNI: 7 Kettasahtlid: 4x 2.5" pesa 3x3.5" Ventilaatoritugi: ÜLESSE PAIGALDATUD - 1x Aspect 12 RGB ETTE PAIGALDATUD -2x Aspect 12 ÜLESSE VÕIMALIK PAIGALDADA 2x120/140 TAHA VÕIMALIK PAIGALDADA 1x120 ETTE VÕIMALIK PAIGALDADA 2x120/140 Radiaatoritugi: ÜLEVAL - 240 mm
Prime AP201 Tempered Glass | Max GPU Length 338 mm; PSU Length 140-180 mm | Micro | PSU Not included | Top: 3 x 120 mm; 2 x 140 mm, Rear: 1 x 120 mm, Pre-installed Fans (Rear): 1 x 120 mm | Dimensions 205 x 350 x 460 mm
Corsair mid-tower 3000D tempered glass case, white The white ATX mid-tower CORSAIR 3000D AIRFLOW provides intensive air circulation and excellent cooling. A steel front panel and two pre-installed CORSAIR SP120 ELITE fans ensure optimal airflow through the case, while a tempered glass side panel allows for easy viewing of components. Up to 8 120mm fans or up to 4 140mm fans can be accommodated in the intelligently organized interior. With room for radiators up to 360mm in size, support for 3.5" and 2.5" drives, and support for four-slot graphics cards up to 360mm in length, you can create a high-performance system. The front I/O panel has two USB 3.2 Type A ports and a microphone and headphone jack. Outstanding Cooling Capabilities: Spacious interior holds up to 8 x 120mm cooling fans or 4 x 140mm fans with multiple heatsinks including one 360mm front and one 280mm on top (depending on the height of the memory modules) RAM). CORSAIR AirGuide Technology: The two pre-installed SP120 ELITE fans generate 24.7 dBA of noise and feature CORSAIR AirGuide technology that increases static pressure and directs airflow for better cooling. Dedicated graphics card cooling: The case accommodates the latest graphics cards and has two additional 120mm fan mounts on the PSU shroud that allow you to install fans directing the airflow directly to the graphics card. Four-slot graphics capability: For an advanced, high-performance computing setup, you can freely install a four-slot graphics card up to 360mm in length into the chassis. Optimized front panel for intensive air circulation: The optimized steel front panel provides powerful airflow in the system for maximum cooling. Tempered glass side panel: Show off your internal components in elegant style. All the storage you need: Holds up to 2 SSDs and 2 HDDs.
Experience peak performance within an innovative compact dual-chamber. Prioritizing GPU cooling, the H6 Flow's panoramic glass showcases the interior while freeing up space for improved airflow. Wraparound glass panels with a seamless edge provides an unobstructed view of the inside to highlight key components. Compact dual-chamber design improves overall thermal performance and creates a clean, uncrowded aesthetic. Includes three pre-installed 120mm fans positioned at an ideal angle for superb out-of-the-box cooling. The top and side panels feature an airflow-optimized perforation pattern to enhance overall performance and filter dust. An intuitive cable management system simplifies the build process by using wide channels and straps. Tool-free access to the top and side panels makes upgrading quick and convenient. Top panel supports radiators up to 360mm in length. Up to 365mm GPU and 200mm PSU clearance Compact Dual-Chamber Improves cooling performance and creates an uncrowded aesthetic. Out-of-the-Box Cooling 3 x 120mm fans are angled for optimal out-of-the-box cooling. High Performance Airflow Perforation pattern on the panels is optimized for maximum airflow. Cable Management Easily manage cables with the wide channels and included straps. Tool-Free Entry Access the top and side panels without tools for quick upgrades Spacious Support Up to a 360mm radiator in the top and clearance for a 365mm GPU.
Fractal Design Pop Silent - Torn - ATX Product Type: System cabinet Form Factor: Torn värv: must solid I/O Ühendusi: 2 x USB 3.0 Audio sisend Audio joon-out Supported Motherboards: ATX, Mini-ATX, Mini-ITX System Cabinet Features: kaabel management system, toetab 120 mm radiator in rear, PSU dust filters, toetab Kuni 280 mm radiator in front panel Power Device: No toiteplokk (ATX) mõõtmed (WxDxH): 21.5 cm x 47.35 cm x 45.4 cm kaal: 7.3 kg Manufacturer Warranty: 2-year garantii Designed For: Fractal Design Model D, Type D
MAG FORGE 320R AIRFLOW / WHITE - Supports up to 360 mm AIO liquid cooler and large 40 series GPU. - Supports up to 11 x system fans configuration, providing ventilation and stable performance to the whole system. - Built-in ARGB fans and control board, providing striking lighting and vivid lighting effects. - Tempered Glass Side Panel displays RGB lighting effects. - The Magnetic Dust Filter on the top vents being easily remove for cleaning. - Uni Front Panel Cable makes your DIY process easier. - LED Switch button provides intuitively control & 9 lighting effects.
Modular big tower in white, with touch-sensitive I/O panel, invertible interior, tempered glass side window, fan control and RGB controller, integrated RGB lighting, including 3x 140-mm fans.
ARGB - Middle Tower | czarna | window | no power supply | 2 x USB 2.0, 2 x USB 3.0, 2 x Jack | 447mm x 220mm x 510mm | 4 x wen 120mm | ARGB backlight (NPC-1518)
Housings are our middle name. We've been on this topic for years and it's hard to impress us, but the sight of ENDORFY Arx 500 ARGB gives us goosebumps. It's out of pride - although some say it's because of the low temperature inside the housing. We have included our best solutions (including 4 Stratus 140 PWM ARGB). As a result, you get one of the largest (486×228×429 mm, i.e. slightly shorter than the Arx 700 series) ENDORFY cases - with room for a tall cooling system (up to 179 mm), 7 fans and most available graphics cards (up to 350 mm ). The outside is also great - with a tempered glass window and front and top panels that act as filters, our ENDORFY Arx 500 ARGB can become a housing master. Come get some fresh air! We all know that long hours at work and on the battlefield (yes, there is a difference) = welded components that beg for a break over time. With Arx 500 ARGB you don't have such actions - the casing helps keep them pleasantly cool even when you remove the components from the factory. This is due to the spacious interior, which can accommodate up to 7 fans. Additionally, the housing panels act as filters - so you don't need additional protection against dust. Compared to traditional solutions, this single layer allows for better air circulation and makes it easier to keep the components in a pleasant draft (because cooling is extremely important to us). Lord of the winds When you look inside the Arx 500 ARGB, you immediately see that there is a specific team of cooling fans working inside. We packed 4 Stratus 140 PWM ARGBs in it, created in cooperation with Synergy Cooling, so you can be sure of adequate airflow and low temperature. Because winter never surprises us. The Stratus 140 PWM ARGB is our favorite. It's 14 cm tall, has an optional semi-passive mode and a durable FDB bearing, so you can count on quiet and smooth operation even in extreme conditions. We also added a splitter to control the fan speed using a PWM signal from one motherboard connector. With such a package you are like a real ruler of the storms. Panels with filters If we were to talk about the best option in the Arx 500 ARGB, in our opinion, we would choose excellent ventilation. This is provided, among others, (right after great fans) by panels made of finely perforated sheet metal. Some people will probably say that they can be replaced with put-on filters, but the truth is that the double anti-dust layer limits the air flow like metal armor in LARPs. And no one likes to have welded... components. That's why we made sure that the panels (front and top) in our case act as filters. This single protective layer makes the inside of the case as cool as a winter morning, and you don't have to install additional dust protection. Additionally, you can remove each filter and clean it with a cloth or a vacuum cleaner (or rinse it under running water) and it will take you literally a moment. Mister of casings We've already said it, but we'll say it again if there's ever a Mr. Housing election, the Arx 500 ARGB has a chance to make it to the podium. All we need to do is turn on the ARGB-lit fans inside and the title is ours. The tempered glass side highlights them like a dream. Everything's all right! If someone asked us to describe the Arx 500 ARGB in three words, we would say: Everything is fine! It's literally one of our largest cases, so it easily fits everything that's most important to you. Of course we mean components. Arx 500 ARGB is 486×228×429 mm, so you can pack a lot inside, for example a tall cooling system (up to 179 mm), 7 fans (including 4 you get from us at the start) and most graphics cards available on the market (up to 350 mm). There will also be a large power supply, you can mount it in the position that is most convenient for you. Its installation is not a philosophy, because we have added, among other things, a dedicated mounting frame. Light in the housing Equipment without a backlight is ok, but it's nice to see a light in the housing sometimes. With Arx 500 ARGB you have the option of just one click (the RESET button on the top of the housing is responsible for control) and your components will be illuminated with a cosmic glow. Thank your ARGB fans for that. Thanks to 4 Stratus 140 PWM ARGB lights (we installed them in the housing for you), you can freely configure the backlight. You can set them up in just a moment thanks to the built-in PWM and ARGB controllers - everything is immediately connected into one working whole, compatible with ENDORFY products with the ARGB mark (and compatible products from other manufacturers), so you can easily synchronize the backlight of the entire set based on Arx 500 ARGB. Even if it's your first assembly ever.
Eleganter Midi-Tower für Gaming-PCs, mit Front aus Eichenholz, kompatibel mit E-ATX Mainboards, Seitenteil aus Mesh-Fläche, bis zu 7x 120-mm-Lüfter oder 8x 140-mm-Lüfter, bis zu 2x 3,5-Zoll oder 4x 2,5-Zoll-Laufwerke, I/O-Panel mit 1x USB 3.1 Typ C und 2x USB 3.0 Typ A
Midi-tower case, with tempered glass side panel, top and front with mesh, three integrated PWM-ARGB fans, subtle ARGB lighting with integrated control.
ROG Hyperion GR701 E-ATX computer case, 420 mm dual radiator support, four 140 mm fans, metal GPU holder, component storage, ARGB fan hub, 60W fast charging. - Extra Cooling: Dual 420mm radiator support, four 140 mm fans and a built-in fan hub offer massive airflow possibilities - Extra Space: The beefiest graphics cards get plenty of room; cable management gets an expansive chamber that is 34 mm deep, with a 46 mm wide routing channel - Extra Convenience: Hinged tool-free side panels, a built-in storage drawer and an integrated graphics card holder come together to amp up the building experience - Extra Power: Dual USB Type-C ports, 60-watt fast charging, aluminum-reinforced frame and handles deliver power and premium ruggedness - Extra Stylish: The fan hub and lighting panel all support Aura Sync, and the chassis is decked out with anodized metal and hairline finishes
Elegant midi-tower by ASUS in white, side panel made of tempered glass, removable top, 4x 140-mm fans with ARGB pre-installed, space for 1x 280/360-mm radiator, graphics cards up to 407 mm, 2x USB 3.2 Gen1 / 1x USB 3.2 Gen2x2 Type-C
Dimensions: 201 x 435 x 435 mm (W x H x D) Material: Steel, Tempered Glass Weight: approx. 5.75 kg Colour: Black Form Factor: E-ATX (up to 279 mm wide), ATX, Micro-ATX, Mini-ITX Total Possible Fans: 3x 120 mm (Front) 2x 120 mm (Top) 1x 120 mm (Rear) Pre-Installed: 1x 120 mm Molex (Front) 1x 120 mm Molex (Rear) Radiator Mountings: 1x 240 mm (Front) 1x 240 mm (Top) Filter: Top, Bottom Drive Bays: 3x 3.5/2.5" (internal) Power Supply: 1x Standard ATX up to 200 mm (optional) Expansion Slots: 7 I/O Panel: 2x USB 2.0 (internal connection) 1x USB 3.0 (internal connection) 1x Audio In/Out Maximum GPU Length: 380 mm Maximum CPU Cooler Height: 160 mm
Tootjakoduleht: http://www.msi.com/PC-case/MPG-GUNGNIR-110R Mõõtmed: 215 (W) x 430 (D) x 450 (H) mm Materjal ja kaal: 7.9Kg Kujutegur: ATX / M-ATX / Mini ITX Kettaraamid: 2.5’ SSD x 2 + 3.5” with 2.5” combo tray x 2 I / O-paneel: USB 3.2 Gen 1 Type A x 2 USB 3.2 Gen 2 Type C x1 Audio x1 Mic x1 GPU maksimaalne pikkus: 340mm Maksimaalne protsessori jahuti kõrgus: 170mm Maksimaalne PSU pikkus: 250mm Ventilaatorite tugi: Taga - 1 x 140mm/120mm Ees - 2 x 140mm/ 3 x 120mm Üleval - 2 x 140mm/ 3 x 120mm Radiaatori kinnitus: Taga - 120mm Ees - 120, 140, 240, 280, 360 mm Üleval - 120 / 240mm Kaasas: Taga - 120mm ARGB Fan x1 Ees - 120mm ARGB Fan x 3
Stylischer Midi-Tower in Schwarz, Front mit RGB-Beleuchtung, inkl. 4x 120-mm-FRGB-Lüfter, Temperglas-Seitenteil, mit Netzteilabdeckung, Grafikkarten bis 317 mm und CPU-Kühler bis 157 mm
