The Lian Li DAN Cases A3-mATX Wood Edition in white combines minimalist design with luxurious functionality. With its elegant beech wood front, excellent airflow thanks to mesh panels, and flexible customization options, it’s the perfect choice for anyone wanting a powerful, compact setup. White micro-ATX case from Lian Li in cooperation with DAN Cases Elegant front cover made of fine beech wood and side panel of tempered glass Mesh panel on the top for excellent airflow Flexibly customizable: let your imagination run wild Outstanding cooling thanks to support for 360 mm radiators Compatible with Micro-ATX or Mini-ITX motherboards Supports different power supplies from SFX to ATX A touch of luxury: The Lian Li DAN Cases A3-mATX Wood Edition in white If you are looking for a small form factor case for high-performance PC hardware, the Lian Li DAN Cases A3-mATX Wood Edition is worth a closer look. This white case combines minimalist design with luxurious features: the fine beech wood front gives your setup a touch of exclusivity. With a capacity of about 26 liters, this white micro-ATX case is compact and saves space. At the same time, the A3-mATX Wood Edition is perfect for high-end PC components, as it provides effective cooling despite its small size. Thanks to ample space for fans and radiators and generous ventilation openings, this mini-tower easily meets the needs of powerful hardware. Flexibility meets performance: The fan and cooling options of the Lian Li DAN Cases A3-mATX Wood Edition in white The white Lian Li DAN Cases A3-mATX Wood Edition accommodates up to 10 fans in the 120 mm format. These can be distributed as follows: three on the top, three on the side, three on the bottom, and one at the rear. Alternatively, two 140 mm fans can be mounted on both the top and the side. With 25 mm thick fans at the bottom of the case, GPU height is limited to 61 mm (3 slots). CPU air coolers can have a maximum height of 165 mm. Lian Li and Daniel Hansen from DAN Cases also considered water cooling in the development of the A3-mATX: A radiator can be installed in three locations inside the case: on the top or side, with support for up to a 360 mm (triple radiator) or 280 mm (dual radiator). Here, you have to choose between the two positions. The bottom of the white case can accommodate an additional 240 mm radiator. If you mount the fans below the radiator, you can even install a 360 mm radiator. Customizable configuration: The versatile options of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX in white is suitable for a motherboard in the Micro-ATX or Mini-ITX form factor. Unlike a mini-ITX case, this PC case allows you to install a graphics card up to 4 slots high and up to 415 mm long, thanks to its 4 expansion slots. The drive cage provides space for two 2.5-inch SSDs. At the bottom of the white case, you can also install a 3.5-inch HDD or another 2.5-inch drive. Choose between an ATX, SFX-L, or SFX power supply and mount it flexibly at the front or side, creating extra space for your graphics card or radiator—just as you need. With the A3-mATX, the smaller your power supply, the more space you have for the rest of your hardware. The I/O panel on the front of the Lian Li DAN Cases A3-mATX Wood Edition—white offers two USB 3.0 Type-A ports, one USB 3.1 Type-C port, two 3.5 mm audio jacks (mic-in/audio-out), and a power button for switching on. Note: The Lian Li DAN Cases A3-mATX Wood Edition offers numerous configuration options, but space inside this case is limited. The size and position of the power supply are crucial for choosing the right PC components. That's why we recommend careful planning in advance using the manual.
Micro-ATX case, innovative front-mounted power supply, GPU support up to 430mm, space for up to seven 120mm fans, dedicated radiator chamber, glass panels on front and side, includes three 120mm reverse fansThe Phanteks XT V3 combines a compact design with generous room for modern hardware. With stylish glass panels and robust cooling, your gaming setup becomes a true showcase. Compact Micro-ATX case: ideal for modern builds Ample space: supports GPUs up to 430mm in length Optimized for cooling: up to seven 120mm fans or a 360mm radiator Compatible: supports back-connect motherboards Showcase design: tempered glass panels on the front and side The Phanteks XT V3: Compact Mini Case with Ample Space Phanteks XT V3 Case Thanks to its compact form factor, the Phanteks XT V3 can be easily integrated into a wide variety of gaming or professional setups—while still offering excellent support for modern hardware. The spacious interior accommodates Mini-ITX and Micro-ATX motherboards and supports back-connect designs. High-performance GPUs fit easily as the Phanteks XT V3 provides four PCIe slots and space for GPUs up to 430mm. The rear chamber impresses with an innovative design for premium hardware. Instead of the usual position, the PSU is relocated to the top front. This enables the Phanteks XT V3 to support full-sized ATX power supplies, ensuring greater compatibility. Powerful Cooling Phanteks XT V3 The Phanteks XT V3 delivers outstanding cooling performance. Seven mounting points for 120mm fans—three at the top, three at the bottom, and one at the rear—enable efficient airflow layouts. Out of the box, three powerful M25-120 reverse DRGB fans at the base provide excellent cooling. Additionally, the Phanteks XT V3 features a dedicated top chamber for a 360mm radiator. This makes it easy to install a high-performance AIO cooler, keeping even high-end CPUs reliably cool during the most intense gaming sessions. Showcase Case Phanteks XT V3 With the Phanteks XT V3, you can perfectly display both your hardware and your building skills. The rear chamber offers ample space for cable management along with smart routing options for a tidy system. Completing the look are tempered glass panels on the front and side, providing an unobstructed view of your components from any angle. Comprehensive I/O Panel Phanteks XT V3 The Phanteks XT V3 provides excellent support for your gaming setup thanks to its front I/O panel on the bottom right. It features both a USB Type-A and Type-C port with USB 3.2 Gen 2x2 standard. Additionally, a 3.5mm combo audio jack is available for your gaming headset.
Water cooling case with space for radiators up to 420mm, supports motherboards up to XL-ATX, GPUs up to 445mm, and CPU coolers up to 170mm in height; accommodates up to four drives. Features 5x G1/4-inch ports, 1x drain port, and 1x fill port, with integrated LEDs.Black water cooling case ideal for custom water cooling setups.Efficient cooling options with support for radiators up to 360mm.Compatible with large motherboards up to XL-ATX.Room for graphics cards up to 445mm and CPU coolers up to 170mm tall.Supports up to four drives.Five G1/4-inch ports, plus one drain and one fill port.Multiple integrated LED strips for lighting.Singularity Computers Stream-M: Case for your custom water cooling build.The Singularity Computers Stream-M is a water cooling case specifically engineered for custom water cooling installations. This large tower offers ample space for high-end hardware, which is efficiently cooled by your water loop. Its open design showcases the RGB lighting of the distro plate and the built-in LED strips to their fullest.Cooling with custom water coolingThis case does not support the installation of individual fans; instead, you can mount up to two 420mm radiators. The water cooling case features five G1/4-inch ports, plus fill and drain ports, and supports D5 pumps—enabling you to build your water cooling system precisely how you like it.Hardware installationThe tower allows for both horizontal and vertical installation of graphics cards up to 445mm in length. Motherboards up to XL-ATX size are supported. The CPU cooler’s height must not exceed 170mm. Power supply units can be up to 240mm long, offering excellent flexibility. Up to four 2.5-inch drives can be installed for storing programs and games; note that two of these drives are not available if the GPU is mounted vertically.
Midi tower with optimized airflow, mesh front, compatible with up to E-ATX, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels The HAVN BF 360 is perfect for gamers and hardware enthusiasts who want no compromises: robust cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and innovative SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUSpace for up to seven fans or two 360 mm radiatorsCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm clearance – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360HAVN BF 360: Airflow meets styleThe front features a distinctive ribbed mesh that draws in air precisely and reduces flow resistance. An integrated guide with a 135° angle directs fresh airflow straight to the GPU and CPU – for maximum cooling without heat buildup. Flexible mounts for fans or radiators support both air and water cooling solutions.HAVN BF 360 side viewCooling power for your high-end hardwareThe interior accommodates up to seven fans. Alternatively, you can install radiators up to 420 mm at the front. With clearance for CPU coolers up to 195 mm tall and a spacious interior, there is plenty of room for large air coolers or custom water-cooling loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation at peak performance.HAVN BF 360 side rearCompatibility without compromiseThe BF 360 offers ample space for motherboards up to E-ATX (maximum 277 mm wide). It provides a generous 410 mm clearance for graphics cards – perfect for current RTX and Radeon models.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restrictions. Two modular drive trays can accommodate either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you get pre-defined cable routes, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grip edges and a practical pull tab – maintenance and upgrades have never been so effortless.HAVN BF 360 I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C port, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re ready for the future, whether gaming or working.
Beautifully crafted and engineered to maximize cooling potential with its amazing expansion flexibiltiy, the Enthoo Pro is the budget friendly mid-tower from Phanteks. Embracing many features from the Enthoo Primo, without the price tag. This case has mulitple radiator support, removable ssd bracket, closed HDD panel, and velcro cable management. The Enthoo Pro, trying to establish its own solid reputation like the award winning Enthoo Primo.Features:Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks’ new redesigned and better performing SP series fans. Budget friendly case, Phanteks’ Enthoo Pro, unleash unlimited possibilities.KujutegurFull-TowerTüüpPCMaterjalPlast, Teras5,25" lahtrite arv33,5" lahtrite arv6Emaplaadi toetatud kujuteguridATX,EATX,Micro-ATXToote värvMustAknagaEi2,5" salvede arv7Sisemiste 3,5" salvede arv6Väliste 5,25" kettalahtrite arv3SobilikMängimineLaienduspesade arv8CPU jahuti maksimaalne kõrgus19,3 cmGraafikakaardi maksimaalne pikkus47,2 cmKaasas toiteplokkEiUSB 2.0 portide arv2USB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahInstallitud esiventilaatorid1x 200 mmMaksimaalne esiventilaatorite arv2Toetatud esiventilaatorite läbimõõt120,140,200 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt120,140 mmMaksimaalne ülemiste ventilaatorite arv3Toetatud ülemiste ventilaatorite läbimõõt120,140,200 mmMaksimaalne alumiste ventilaatorite arv2Toetatud alumiste ventilaatorite läbimõõt120,140 mmVentilaatori kiirus1200VedelikjahutusJahToetatud eesmise radiaatori ventilaatori suurused240 mmToetatud tagumise radiaatori ventilaatori suurused140 mmToetatud ülemise radiaatori ventilaatori suurused420 mmToetatud kõvakettasuurused2.5"Laius235 mmSügavus550 mmKõrgus535 mmKaal11,4 kgPakendi kaal13,3 kgMüratase19 dB
After bringing Mini-ITX into mainstream DIY (do it yourself) market in 2009 with the Sugo SG05, SilverStone is looking to define the category again with SG13, a newly evolved design that aims to satisfy every type of computer users. At only 11.5 liters in size, it has suitably small statue for easily integrating into numerous computing environments and will comfortably fit many standard components for general purpose or office builds. For enthusiasts and in keeping with Sugo series’ famed tradition, the SG13’s ability to fit 10.5” long expansion card, standard ATX power supply, and all-in-one liquid cooler in 120mm or 140mm size will help produce amazingly small and powerful systems.KujutegurMinitornTüüpPCMaterjalTeras3,5" lahtrite arv1Emaplaadi toetatud kujuteguridMini-ATX, Mini-DTXToote värvMust, ValgeAknagaEi2,5" salvede arv1Sisemiste 3,5" salvede arv1Laienduspesade arv2CPU jahuti maksimaalne kõrgus6,1 cmToiteploki maksimaalne pikkus15 cmKaasas toiteplokkEiUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahMaksimaalne esiventilaatorite arv1Toetatud esiventilaatorite läbimõõt120,140 mmToetatud kõvakettasuurused2.5,3.5"Laius225 mmSügavus285 mmKõrgus181 mmKaal2,47 kg
Milo Series ML09- Super small at only 7 liters- Premium styling front panel with mirror finish- Includes one 120mm fan and support up to two 80mm fans- Multipurpose 4-in-1 bracket- Support Mini-ITX motherboard and SFX power supply- Support dual slot low-profile graphics or expansion card- Support four 2.5" HDD/SSDThe ML09 is an evolution and variation of the premium Mini-ITX HTPC case, the Milo ML06. With external dimension unchanged at 7 liters, the ML09 rearranged internal layout provides a crucial second expansion slot for support of more powerful low-profile discrete graphics card or expansion card that are two slots wide. For users that wish to build with a more robust GPU or tuner card in console/DVR-like form factor to game or for multimedia content recording, the ML09 is a great starting point.KujutegurHTPCTüüpPCMaterjalAkrüül, Plast, Teras3,5" lahtrite arv1Emaplaadi toetatud kujuteguridMini-DTX, Mini-ITXToote värvMustAknagaEi2,5" salvede arv6Sisemiste 3,5" salvede arv1Materjali paksus0,8 mmÜlemine kateJahMahutavus7 lLaienduspesade arv2CPU jahuti maksimaalne kõrgus7 cmGraafikakaardi maksimaalne pikkus17,5 cmKaasas toiteplokkEiToetatud elektritoite tarne vormi faktoridSFXToiteallikate arv1USB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahMaksimaalne küljeventilaatorite arv2Toetatud küljeventilaatorite läbimõõt80 mmMaksimaalne ülemiste ventilaatorite arv1Toetatud ülemiste ventilaatorite läbimõõt120 mmVentilaatori kiirus1500Toetatud kõvakettasuurused2.5,3.5"Laius350 mmSügavus205 mmKõrgus109 mmKaal2,07 kgMüratase18 dB
No. of drive bays: 4 Dimensions: 492 x 208 x 471 mm Weight: 8.05 Other features: Fan options:- Front: 3 x 120mm, 2 x 140mm- Top: 1 x 120mm, 1 x 140mm- Rear: 1 x 120mm- Bottom: 1x 120mm
No. of drive bays: 10 Dimensions: 583 x 230 x 560 mm Weight: 14.7 Other features: Fan options:Front:- 1 x 120mm or 2 x 120mm or 3 x 120mm- 1 x 140mm or 2 x 140mm- 1 x 200mm or 2 x 200mmTop:- 1 x 120mm or 2 x 120mm or 3 x 120mm- 1 x 140mm or 2 x 140mm- 1 x 200mm or 2 x 200mmRear:- 1 x 120mm or 1 x 140mmbottom:- 1 x 120mm or 2 x 120mm
Tootja: AKYGA Tootegrupp: arvutikorpus arvutikorpuse tüüp: ATX Ümbrise tüüp (motherboard type): ATX, MicroATX, Flex ATX, MINI ITX Supported toiteploki standards: ATX external 3,5"sahtleid: 0 external 5,25"sahtleid: 1 external 5,25" väikseid sahtleid: 0 internal 2,5"sahtleid: 3 internal 3,5"sahtleid: 3 intenal 5,25"sahtleid: 1 paigaldatud toiteplokk(ies): Ei maksimum toiteplokke: 1 toiteploki võimsus: andmed puuduvad elektripesade pistikuid Serial ATA: andmed puuduvad ATX toiteploki ühenduspesa tüüp: andmed puuduvad +12V elektripesa tüüp: andmed puuduvad I/O Ühendusi: 1x stereo mini-jack (kõrvaklappide väljund), 1x stereo mini-jack (mikrofon input), 2x USB 3.0, 1x USB 2.0 ventilaatori kiiruse regulaator: Ei paigaldatud ventilaatoreid: 0 maksimaalne kogus of fans: 3 laius: 200 mm pikkus: 418 mm kõrgus: 412 mm pesade arv korpuses: 7 tk külje õhukanal: Jah tööriistavaba kokkupanek: Ei värv: must Lisaomadused: andmed puuduvad Lisainfo: Product Site
ASUS TUF Gaming GT501 Mid-Tower Computer Case for up to EATX Motherboards with USB 3.0 Front Panel, Smoked Tempered Glass, Steel Construction, and Four Case Fans.
Mid-Tower with support for EATX Motherboards featuring a metal chassis and panels with custom TUF Gaming spatter pattern and 4mm-thick smoked, tempered-glass full view side panel.
Keep Your Cool with three 120mm Aura Sync RGB-illuminated fans, one 140mm rear PWM fan, and up to seven optional fan-mounting points.
Custom Liquid Cooling Ready with support for top or front mounted 360mm radiators, rear mounted 140mm radiator, and pre-drilled water pump/reservoir mounting holes.
Vertical GPU Expansion Slot plus 7 traditional expansion slots.
Ergonomic, Woven-cotton Carry Handles enable easy and safe transport up to 65lbs
Stylisches Gehäuse für UCFF-Boards (Intel NUC), Lüfterlose Kühlung durch passives Gehäusedesign mit großen Finnen, Edler Look durch gebürstetes Aluminium in schwarz, Vertikal und horizontal platzierbar, Platz für einen 2,5-Zoll-Datenträger
