Arx 500 Air We've always had a sneak peek at the housings and we've seen a lot - and the sight of Arx 500 Air still makes us look like a big banana. No wonder, because we packed all our knowledge into it. Spoiler alert - it turned out like a dream. This is one of the largest (slightly shorter than the Arx 700 series) cases we have created. It is 486×228×429 mm - this is easily enough for, among others, a high cooling system (up to 179 mm), 7 fans (including 5 Stratus 140 PWM fans, which we provide at the start) and most graphics cards available on the market (up to 350 mm). . Everything sits in a pleasant draft, because the finely perforated front and top panels let in fresh air and block dust. You can check it through a tempered glass window.
The CORSAIR 2000D AIRFLOW is a Mini-ITX small-form-factor case with phenomenal cooling thanks to steel mesh front, side, and rear panels that deliver plentiful ventilation to your system.
MidiTower, M/B Type mini-ITX/m-ATX/ATX, USB 3.0 x2, RGB LED Switch, Reset Button, Audio In & Out (Supports AC97 / HD Audio), w/o PSU, Dimensions 480x210x435mm
Product kirjeldus: Zalman S2 TG - Torn - ATX Product Type: System cabinet Form Factor: Torn I/O Ühendusi: 2 x USB 2.0 1 x kõrvaklapid 1 x microphone 1 x USB 3.0 Supported Motherboards: ATX, microATX, Mini-ITX System Cabinet Features: Supports 120 mm radiator in rear, toetab 120 mm radiator in front panel, tempered glass side panel, bottom dust filter, top magnetic dust filter Power Device: No toiteplokk mõõtmed (WxDxH): 19.6 cm x 42.4 cm x 46.2 cm kaal: 5 kg
Fractal Design Pop Silent - Torn - ATX Product Type: System cabinet Form Factor: Torn värv: must solid I/O Ühendusi: 2 x USB 3.0 Audio sisend Audio joon-out Supported Motherboards: ATX, Mini-ATX, Mini-ITX System Cabinet Features: kaabel management system, toetab 120 mm radiator in rear, PSU dust filters, toetab Kuni 280 mm radiator in front panel Power Device: No toiteplokk (ATX) mõõtmed (WxDxH): 21.5 cm x 47.35 cm x 45.4 cm kaal: 7.3 kg Manufacturer Warranty: 2-year garantii Designed For: Fractal Design Model D, Type D
Spacious Micro-ATX case in black, for motherboards up to Micro-ATX, tempered glass side panel, up to 11x 120-mm fans possible, 2x radiators up to 360 mm possible, graphics cards up to 400 mm in length, dual-chamber design.
Housings are our middle name. We've been on this topic for years and it's hard to impress us, but the sight of ENDORFY Arx 500 ARGB gives us goosebumps. It's out of pride - although some say it's because of the low temperature inside the housing. We have included our best solutions (including 4 Stratus 140 PWM ARGB). As a result, you get one of the largest (486×228×429 mm, i.e. slightly shorter than the Arx 700 series) ENDORFY cases - with room for a tall cooling system (up to 179 mm), 7 fans and most available graphics cards (up to 350 mm ). The outside is also great - with a tempered glass window and front and top panels that act as filters, our ENDORFY Arx 500 ARGB can become a housing master. Come get some fresh air! We all know that long hours at work and on the battlefield (yes, there is a difference) = welded components that beg for a break over time. With Arx 500 ARGB you don't have such actions - the casing helps keep them pleasantly cool even when you remove the components from the factory. This is due to the spacious interior, which can accommodate up to 7 fans. Additionally, the housing panels act as filters - so you don't need additional protection against dust. Compared to traditional solutions, this single layer allows for better air circulation and makes it easier to keep the components in a pleasant draft (because cooling is extremely important to us). Lord of the winds When you look inside the Arx 500 ARGB, you immediately see that there is a specific team of cooling fans working inside. We packed 4 Stratus 140 PWM ARGBs in it, created in cooperation with Synergy Cooling, so you can be sure of adequate airflow and low temperature. Because winter never surprises us. The Stratus 140 PWM ARGB is our favorite. It's 14 cm tall, has an optional semi-passive mode and a durable FDB bearing, so you can count on quiet and smooth operation even in extreme conditions. We also added a splitter to control the fan speed using a PWM signal from one motherboard connector. With such a package you are like a real ruler of the storms. Panels with filters If we were to talk about the best option in the Arx 500 ARGB, in our opinion, we would choose excellent ventilation. This is provided, among others, (right after great fans) by panels made of finely perforated sheet metal. Some people will probably say that they can be replaced with put-on filters, but the truth is that the double anti-dust layer limits the air flow like metal armor in LARPs. And no one likes to have welded... components. That's why we made sure that the panels (front and top) in our case act as filters. This single protective layer makes the inside of the case as cool as a winter morning, and you don't have to install additional dust protection. Additionally, you can remove each filter and clean it with a cloth or a vacuum cleaner (or rinse it under running water) and it will take you literally a moment. Mister of casings We've already said it, but we'll say it again if there's ever a Mr. Housing election, the Arx 500 ARGB has a chance to make it to the podium. All we need to do is turn on the ARGB-lit fans inside and the title is ours. The tempered glass side highlights them like a dream. Everything's all right! If someone asked us to describe the Arx 500 ARGB in three words, we would say: Everything is fine! It's literally one of our largest cases, so it easily fits everything that's most important to you. Of course we mean components. Arx 500 ARGB is 486×228×429 mm, so you can pack a lot inside, for example a tall cooling system (up to 179 mm), 7 fans (including 4 you get from us at the start) and most graphics cards available on the market (up to 350 mm). There will also be a large power supply, you can mount it in the position that is most convenient for you. Its installation is not a philosophy, because we have added, among other things, a dedicated mounting frame. Light in the housing Equipment without a backlight is ok, but it's nice to see a light in the housing sometimes. With Arx 500 ARGB you have the option of just one click (the RESET button on the top of the housing is responsible for control) and your components will be illuminated with a cosmic glow. Thank your ARGB fans for that. Thanks to 4 Stratus 140 PWM ARGB lights (we installed them in the housing for you), you can freely configure the backlight. You can set them up in just a moment thanks to the built-in PWM and ARGB controllers - everything is immediately connected into one working whole, compatible with ENDORFY products with the ARGB mark (and compatible products from other manufacturers), so you can easily synchronize the backlight of the entire set based on Arx 500 ARGB. Even if it's your first assembly ever.
ROG Hyperion GR701 E-ATX computer case, 420 mm dual radiator support, four 140 mm fans, metal GPU holder, component storage, ARGB fan hub, 60W fast charging. - Extra Cooling: Dual 420mm radiator support, four 140 mm fans and a built-in fan hub offer massive airflow possibilities - Extra Space: The beefiest graphics cards get plenty of room; cable management gets an expansive chamber that is 34 mm deep, with a 46 mm wide routing channel - Extra Convenience: Hinged tool-free side panels, a built-in storage drawer and an integrated graphics card holder come together to amp up the building experience - Extra Power: Dual USB Type-C ports, 60-watt fast charging, aluminum-reinforced frame and handles deliver power and premium ruggedness - Extra Stylish: The fan hub and lighting panel all support Aura Sync, and the chassis is decked out with anodized metal and hairline finishes
GIGABYTE C301 GLASS WHITE V2 - Optimized Airflow Design - RGB Fusion with ARGB Connector Hub - Support Motherboards up to E-ATX - Up to 360mm Liquid Cooling Compatible - Support Vertical GPU Installation - Full-Size Tempered Glass Side Panel - With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel - Pre-installed 4 ARGB fans
CORSAIR 3000D RGB mid-tower Tempered Glass White The CORSAIR 3000D RGB AIRFLOW mid-tower ATX case features intensive airflow powered by three high-performance factory-mounted CORSAIR AR120 RGB fans for superior cooling and fantastic lighting effects. The addition of a tempered glass side panel turns your PC into a state-of-the-art computer technology display. The intelligently laid out interior holds up to 8 x 120mm fans or 4 x 140mm fans. With room for radiators up to 360mm in size, support for 3.5" and 2.5" drives, and support for four-slot graphics cards up to 360mm in length, you can create a high-performance system. The front I/O panel has two USB 3.2 Type A ports and a microphone and headphone jack. Outstanding Cooling Capabilities: Spacious interior holds up to 8 x 120mm cooling fans or 4 x 140mm fans with multiple heatsinks including one 360mm front and one 280mm on top (depending on the height of the memory modules) RAM). A complete mid-tower package: A mid-tower ATX case with a sleek, high-airflow design and three pre-installed CORSAIR AR120 RGB fans for superior cooling and compelling lighting effects. Dedicated graphics card cooling: The case accommodates the latest graphics cards and has two additional 120mm fan mounts on the PSU shroud that allow you to install fans directing the airflow directly to the graphics card. Three-slot graphics support: For an advanced, high-performance computing setup, you can freely install a three-slot graphics card up to 360mm in length into the chassis. Optimized front panel for intensive air circulation: The optimized steel front panel provides powerful airflow in the system for maximum cooling. Tempered glass side panel: Show off your internal components in elegant style All the storage you need: Holds up to 2 SSDs and 2 HDDs.
Darkflash DLM21 computer case (white).Are you looking for a computer case that will impress you with its stylish design, give you the possibility to expand your hardware and stand out with a number of optimal solutions? Choose the DLM21! Made of tempered glass, the side panel makes it easy to view the computer's interior, and practical vents ensure effective cooling. The product is compatible with a wide range of components, allowing you to expand and improve your hardware. Among other things, the top of the case features a USB 3.0 port.Carefully thought-out designYou no longer need to use tools to disassemble the case and replace parts. You can conveniently open the magnetic side panel whenever you need it. Made of tempered glass - it allows you to perfectly display individual computer components. It also allows you to achieve excellent lighting effects - it will work well with RGB components, for example. The original design on the front catches the eye and gives the model a unique character. In addition, the steel panels of the case ensure its durability and add even more modern style.Optimal solutions - efficient coolingDon't be afraid of problems with computer cooling. The ventilation holes located on the side panel of the case not only do a fantastic job, but also look great. The product is also compatible with various types of components. For example, you will successfully install in it 2 120 mm or 140 mm fans each, as well as 240 mm water cooling. In total, you can install as many as 5 fans! The case is also equipped with an internal cooling channel.Wide expansion possibilitiesHowever, this is not the end of your possibilities! The model is compatible with a variety of parts, and its user-friendly design makes it easy to expand or upgrade your computer. It also allows you to make optimal use of the available space. Among other things, the case allows you to mount SATA 2.5 drives, a 350/330 mm VGA graphics card and a 210 mm power supply.Compatibility with USB 3.0Discover the advantages of high-speed USB 3.0. The corresponding port located on top of the case will provide you with even more convenience. It is also backward compatible with USB 2.0. The product is also equipped with USB 2.0 ports, headphone output and microphone input. So you will successfully adapt it to your needs and create the perfect computer for you! ManufacturerDarkflashModelDLM21Housing typeMini-towerSide panelTempered glassFront panelPlasticBacklightingNoMotherboard standardM-ATX / ITXPSU standard210 mm, bottom mountSlots for internal drives/drivesHDD: 3 or 2; SSD: 2 or 1;Expansion card slots4Maximum graphics card length350 / 330 mmMaximum CPU cooling height160 mmMaximum number of fans5Fan mounting optionsFront: 2x 120 mm fan; Rear: 1x 120 mm fan; Top: 2x 120 mm fan / 2x 140 mm fan;Water cooling mounting optionsRear: 1x 120 mm; Top: 1x 240 mm;Buttons and controlsPowerConnectors1x USB 3.0, 2x USB 2.0, headphone output, microphone inputMaterialSPCC 0.6 mmColorWhiteHeight405 mmWidth208 mmDepth376 mmWeight4.9 kg
