MidiTower, M/B Type mini-ITX/m-ATX/ATX, USB 3.0 x2, RGB LED Switch, Reset Button, Audio In & Out (Supports AC97 / HD Audio), w/o PSU, Dimensions 480x210x435mm
MÕÕTMED: 215 x 473.5 x 454 EMAPLAADI TUGI: Mini ITX; Micro ATX; ATX GRAAFIKAKAARDI PIKKUS KUNI: 405 mm PROTSESSORI ÕHKJAHUTI KÕRGUS KUNI: 170 mm TOITEPLOKI ÜHILDUVUS: ATX; 17 cm KAABLITELE RUUM: Olemas KAAL: 7.2 kg Ühenduvus I/O PANEEL: 1 x headphones; 2 x USB 3.0; 1x microphone PCI PESASID KUNI: 7 Kettasahtlid: 4x 2.5" pesa 3x3.5" Ventilaatoritugi: ÜLESSE PAIGALDATUD - 1x Aspect 12 RGB ETTE PAIGALDATUD -2x Aspect 12 ÜLESSE VÕIMALIK PAIGALDADA 2x120/140 TAHA VÕIMALIK PAIGALDADA 1x120 ETTE VÕIMALIK PAIGALDADA 2x120/140 Radiaatoritugi: ÜLEVAL - 240 mm
Housings are our middle name. We've been on this topic for years and it's hard to impress us, but the sight of ENDORFY Arx 500 ARGB gives us goosebumps. It's out of pride - although some say it's because of the low temperature inside the housing. We have included our best solutions (including 4 Stratus 140 PWM ARGB). As a result, you get one of the largest (486×228×429 mm, i.e. slightly shorter than the Arx 700 series) ENDORFY cases - with room for a tall cooling system (up to 179 mm), 7 fans and most available graphics cards (up to 350 mm ). The outside is also great - with a tempered glass window and front and top panels that act as filters, our ENDORFY Arx 500 ARGB can become a housing master. Come get some fresh air! We all know that long hours at work and on the battlefield (yes, there is a difference) = welded components that beg for a break over time. With Arx 500 ARGB you don't have such actions - the casing helps keep them pleasantly cool even when you remove the components from the factory. This is due to the spacious interior, which can accommodate up to 7 fans. Additionally, the housing panels act as filters - so you don't need additional protection against dust. Compared to traditional solutions, this single layer allows for better air circulation and makes it easier to keep the components in a pleasant draft (because cooling is extremely important to us). Lord of the winds When you look inside the Arx 500 ARGB, you immediately see that there is a specific team of cooling fans working inside. We packed 4 Stratus 140 PWM ARGBs in it, created in cooperation with Synergy Cooling, so you can be sure of adequate airflow and low temperature. Because winter never surprises us. The Stratus 140 PWM ARGB is our favorite. It's 14 cm tall, has an optional semi-passive mode and a durable FDB bearing, so you can count on quiet and smooth operation even in extreme conditions. We also added a splitter to control the fan speed using a PWM signal from one motherboard connector. With such a package you are like a real ruler of the storms. Panels with filters If we were to talk about the best option in the Arx 500 ARGB, in our opinion, we would choose excellent ventilation. This is provided, among others, (right after great fans) by panels made of finely perforated sheet metal. Some people will probably say that they can be replaced with put-on filters, but the truth is that the double anti-dust layer limits the air flow like metal armor in LARPs. And no one likes to have welded... components. That's why we made sure that the panels (front and top) in our case act as filters. This single protective layer makes the inside of the case as cool as a winter morning, and you don't have to install additional dust protection. Additionally, you can remove each filter and clean it with a cloth or a vacuum cleaner (or rinse it under running water) and it will take you literally a moment. Mister of casings We've already said it, but we'll say it again if there's ever a Mr. Housing election, the Arx 500 ARGB has a chance to make it to the podium. All we need to do is turn on the ARGB-lit fans inside and the title is ours. The tempered glass side highlights them like a dream. Everything's all right! If someone asked us to describe the Arx 500 ARGB in three words, we would say: Everything is fine! It's literally one of our largest cases, so it easily fits everything that's most important to you. Of course we mean components. Arx 500 ARGB is 486×228×429 mm, so you can pack a lot inside, for example a tall cooling system (up to 179 mm), 7 fans (including 4 you get from us at the start) and most graphics cards available on the market (up to 350 mm). There will also be a large power supply, you can mount it in the position that is most convenient for you. Its installation is not a philosophy, because we have added, among other things, a dedicated mounting frame. Light in the housing Equipment without a backlight is ok, but it's nice to see a light in the housing sometimes. With Arx 500 ARGB you have the option of just one click (the RESET button on the top of the housing is responsible for control) and your components will be illuminated with a cosmic glow. Thank your ARGB fans for that. Thanks to 4 Stratus 140 PWM ARGB lights (we installed them in the housing for you), you can freely configure the backlight. You can set them up in just a moment thanks to the built-in PWM and ARGB controllers - everything is immediately connected into one working whole, compatible with ENDORFY products with the ARGB mark (and compatible products from other manufacturers), so you can easily synchronize the backlight of the entire set based on Arx 500 ARGB. Even if it's your first assembly ever.
H7 Flow RGB Mid-Tower ATX Airflow Case with RGB Fans - The H7 Flow RGB revolutionizes GPU cooling in a classic mid-tower form factor. Its vertical PSU layout allows space for 3 x 120mm bottom fans, offering efficient cooling without expanding the case footprint. - Supports three bottom-mounted 120mm fans for direct GPU cooling while retaining a narrow mid-tower footprint. - Comes equipped with a F360 RGB Core single-frame fan for exceptional out-of-the-box cooling and RGB lighting. - High-performance mesh panels maximize airflow for both intake and exhaust, as well as filter dust. - Supports up to 420mm radiators in the front and 360mm radiators in the top for powerful cooling potential. - Intuitive cable management system with wide channels, built-in hooks, and included straps for easy routing. - Capacity for up to 10 fans in total: 3 up top, 3 in front, 3 on bottom, and 1 in the rear. - Conveniently access 2 x USB-A and 1 x USB-C ports located on the top panel. - Tool-less access to the front, top, and side panels makes building and upgrading a breeze.
PURE BASE 501 DX | MidiTower | PSU Not included | Fan at top 1x Pure Wings 3 140mm PWM White; Fan at front 1x Pure Wings 3 140mm PWM White; Fan at rear 1x Pure Wings 3 140mm PWM White | Dimensions 450 x 231 x 463
PURE BASE 501 LX | MidiTower | PSU Not included | Fan at front 3x Light Wings LX 120mm PWM; Fan at rear 1x Light Wings LX 140mm PWM | Dimensions 450 x 231 x 463
ROG Hyperion GR701 E-ATX computer case, 420 mm dual radiator support, four 140 mm fans, metal GPU holder, component storage, ARGB fan hub, 60W fast charging. - Extra Cooling: Dual 420mm radiator support, four 140 mm fans and a built-in fan hub offer massive airflow possibilities - Extra Space: The beefiest graphics cards get plenty of room; cable management gets an expansive chamber that is 34 mm deep, with a 46 mm wide routing channel - Extra Convenience: Hinged tool-free side panels, a built-in storage drawer and an integrated graphics card holder come together to amp up the building experience - Extra Power: Dual USB Type-C ports, 60-watt fast charging, aluminum-reinforced frame and handles deliver power and premium ruggedness - Extra Stylish: The fan hub and lighting panel all support Aura Sync, and the chassis is decked out with anodized metal and hairline finishes
ProArt PA602 E-ATX Black computer case with Superior Airflow and Thermals, 420 mm radiator support, one 140 mm and two 200mm pre-installed system fans, front panel IR dust indicator, power lock latch, tool-less PCIe mounting, USB 20Gbps support Superior Airflow: 15.5 mm front panel grill with 45% porosity, two extra-thick 200 x 38 mm front fans for maximum air intake, and a 140 mm rear exhaust fan Superior Thermals: Two deflectors send incoming air towards the motherboard and other internal components to optimize temperatures Ample Space: Supports one 420 mm radiator for AIO cooling or custom liquid-cooling loops and the most robust graphics card get ample room for horizontal or vertical mounting Extensive I/O: Power Lock Latch and 2-section PWM control; USB Type-C 20Gbps port Front Panel IR Dust Indicator: Timely reminders to clean the filter to maintain top-tier airflow Creator-Friendly Design: Tool-less graphics card mounting, integrated graphics card holder and built-in fan hub come together to amp up the building experience Elegant aesthetics: Minimalist case adorned with ProArt themed design
The NZXT H5 Flow RGB chassis is designed to provide a mid-tower form factor with practical features for gamers and PC builders alike. Its airflow-optimized mesh design enhances cooling performance while the included RGB fans add a vibrant touch to your setup. The side panels are toolless, making it easy to access components, and the cable management system with 28 mm clearance helps maintain a clean interior. With a windowed tempered-glass side panel, the NZXT H5 Flow RGB showcases internal components beautifully. It supports multiple internal bays, allowing for versatile storage options and accommodating long graphics cards up to 410 mm. The chassis also offers excellent cooling support with compatibility for various fan sizes, including a radiator for effective heat dissipation.
The H5 Flow features a perforated front panel to generate an extra dimension of airflow for maximum cooling potential. With optimized thermal performance and intuitive cable management, the H5 Flow is an ideal chassis for most builds.
Automatic RGB fan Equipped with top-quality system fans that cool the system and maximize its performance. System fan included The kit includes top-quality system fans that cool your system and ensure maximum performance Magnetic filter The magnetic dust filter on the top is designed to provide users with the best disassembly and cleaning experience. Optimized air flow This case supports the installation of up to 7 system fans and ensures ventilation of the entire system for better stability. Tempered glass The highest quality tempered glass, 4 mm thick, guarantees window durability and good visibility.
