The Lian Li DAN Cases A3-mATX Wood Edition in white combines minimalist design with luxurious functionality. With its elegant beech wood front, excellent airflow thanks to mesh panels, and flexible customization options, it’s the perfect choice for anyone wanting a powerful, compact setup. White micro-ATX case from Lian Li in cooperation with DAN Cases Elegant front cover made of fine beech wood and side panel of tempered glass Mesh panel on the top for excellent airflow Flexibly customizable: let your imagination run wild Outstanding cooling thanks to support for 360 mm radiators Compatible with Micro-ATX or Mini-ITX motherboards Supports different power supplies from SFX to ATX A touch of luxury: The Lian Li DAN Cases A3-mATX Wood Edition in white If you are looking for a small form factor case for high-performance PC hardware, the Lian Li DAN Cases A3-mATX Wood Edition is worth a closer look. This white case combines minimalist design with luxurious features: the fine beech wood front gives your setup a touch of exclusivity. With a capacity of about 26 liters, this white micro-ATX case is compact and saves space. At the same time, the A3-mATX Wood Edition is perfect for high-end PC components, as it provides effective cooling despite its small size. Thanks to ample space for fans and radiators and generous ventilation openings, this mini-tower easily meets the needs of powerful hardware. Flexibility meets performance: The fan and cooling options of the Lian Li DAN Cases A3-mATX Wood Edition in white The white Lian Li DAN Cases A3-mATX Wood Edition accommodates up to 10 fans in the 120 mm format. These can be distributed as follows: three on the top, three on the side, three on the bottom, and one at the rear. Alternatively, two 140 mm fans can be mounted on both the top and the side. With 25 mm thick fans at the bottom of the case, GPU height is limited to 61 mm (3 slots). CPU air coolers can have a maximum height of 165 mm. Lian Li and Daniel Hansen from DAN Cases also considered water cooling in the development of the A3-mATX: A radiator can be installed in three locations inside the case: on the top or side, with support for up to a 360 mm (triple radiator) or 280 mm (dual radiator). Here, you have to choose between the two positions. The bottom of the white case can accommodate an additional 240 mm radiator. If you mount the fans below the radiator, you can even install a 360 mm radiator. Customizable configuration: The versatile options of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX in white is suitable for a motherboard in the Micro-ATX or Mini-ITX form factor. Unlike a mini-ITX case, this PC case allows you to install a graphics card up to 4 slots high and up to 415 mm long, thanks to its 4 expansion slots. The drive cage provides space for two 2.5-inch SSDs. At the bottom of the white case, you can also install a 3.5-inch HDD or another 2.5-inch drive. Choose between an ATX, SFX-L, or SFX power supply and mount it flexibly at the front or side, creating extra space for your graphics card or radiator—just as you need. With the A3-mATX, the smaller your power supply, the more space you have for the rest of your hardware. The I/O panel on the front of the Lian Li DAN Cases A3-mATX Wood Edition—white offers two USB 3.0 Type-A ports, one USB 3.1 Type-C port, two 3.5 mm audio jacks (mic-in/audio-out), and a power button for switching on. Note: The Lian Li DAN Cases A3-mATX Wood Edition offers numerous configuration options, but space inside this case is limited. The size and position of the power supply are crucial for choosing the right PC components. That's why we recommend careful planning in advance using the manual.
The der8enchtable is a collaboration between Thermal Grizzly, Jon “elmor” Sandström (ElmorLabs), and Roman “der8auer” Hartung. In addition to the features of a standard benchtable—such as integrated mounts for radiators and a power supply—the der8enchtable includes a base unit with an integrated printed circuit board (PCB) for connecting the hardware under test. For consistent test results, fans can be controlled via three fan controllers, each providing three 4-pin fan headers. Each fan zone can be switched independently to 50% or 100% speed, supplies 3 A of power to the fans, and is protected by its own fuse. Additionally, the der8enchtable’s fan zones can be managed externally by the motherboard. Professional benchtable with active PCB Developed in collaboration with ElmorLabs and der8auer 3+1 control zones for fans and AIOs Supports SSD, USB, or microSD for OS and test software Compact, modular, and user-friendly frame design Compatible with air and AIO coolers A-RGB lighting In addition to the fan-control zones, the base unit with integrated PCB offers a secondary control zone with two 4-pin headers for pumps or fans, featuring the same control options as the fan zones. The pump zone supplies 3 A per port—6 A total—and each port has its own fuse. Peripherals can be connected to the der8enchtable via USB (4× Type-A, 2× Type-C). Testing and benchmarking hardware typically requires drivers, a BIOS, or an operating system. To simplify this, storage media can be mounted directly on the benchtable. Up to two 2.5-inch SSDs can be installed on the PCB, and the PCB also provides four microSD card slots—a cost-effective alternative to solid-state drives (SSDs) in terms of price per gigabyte. The test motherboard is connected to the der8enchtable via the 9-pin USB header. The der8enchtable itself is powered by the PSU via a PCIe 6-pin cable. For control of the addressable RGB lighting (aRGB), the der8enchtable can be connected to the motherboard via a 3-pin header. Alternatively, an external RGB controller may be used (not included). A power button and reset function are also provided on the PCB and wired to the motherboard. The der8enchtable’s PCB features preinstalled standoffs for ATX motherboards, which can be reconfigured for Micro-ATX and Mini-ITX boards. On the lower section of the black-anodized aluminum frame, a power supply can be mounted, and a custom-cuttable Velcro strap is provided for cable management. If the lower frame section is not needed, the feet can be attached directly to the base unit with integrated PCB, making the der8enchtable significantly more compact. Port Overview: 1× 9-pin USB header (data connection to motherboard) 1× PCIe 6-pin header (power supply from PSU) 1× 4-pin header (for PWM signal to external fan control) 3× Fan Zones (each with 3× 4-pin fan headers) 1× Pump Zone (2× 4-pin pump headers) 4× MicroSD slots for memory cards 2× On-board SATA connectors 2× SATA out connectors 4× USB 2.0 Type-A (max. 500 mA) 2× USB 2.0 Type-C (max. 3 A) 1× 2-pin header for power button 1× 2-pin header for reset button 1× 3-pin aRGB header (GND / – / D / 5V)
LANCOOL 207 - M-ATX sized case with ATX compatibility - Includes 2 x 140mm ARGB fans at the front and 2 x 120mm PWM fans above the PSU shroud for maximum out-of-box cooling - Fully ventilated mesh panels on the front, top, and bottom, ensuring excellent airflow - Front-mounted PSU with side-facing connector ports for easy cable management - Motherboard tray position redesigned to improve top radiator clearance and locate bottom fans directly under the GPU for better cooling - GPU anti-sag bracket with vertical and horizontal adjustment to support different GPUs
Elegante Distroplate von Singularity Computer, aus transparentem Acrylglas, für allen Versionen vom Spectre 3.0 Gehäuse, integrierte und digital adressierbare RGB-Beleuchtung
Mid tower with tempered glass side panel, supports up to seven fans, space for a radiator up to 360mm, compatible with motherboards up to E-ATX size, graphics card up to 380mm, and CPU cooler up to 175mm in height, supports up to five drives, includes four 120mm fans, and comes with an 850-watt power supply.Mid tower with tempered glass side panel Efficient cooling options with up to seven fans and support for radiators up to 360mm Supports motherboards up to E-ATX Room for graphics cards up to 380mm and CPU coolers up to 175mm in height Supports up to five drives Includes four 120mm fans and an 850-watt power supply The GSI SmartAssembly ARGB Mesh ATX: Mid tower with high cooling performance The GSI SmartAssembly ARGB Mesh is a mid tower offering extensive options for installing your hardware—cooled efficiently by fans and excellent airflow. Well cooled by fans, radiators, and design You can install up to seven fans in this tower. The front supports up to three 120mm or 140mm fans. The top can hold three 120mm or two 140mm fans. One 120mm or 140mm fan can be mounted at the rear. The package already includes four 120mm fans pre-installed at the front and back. The design, especially, significantly improves airflow. This is achieved through the large vents on the front and rear of the case. If you prefer water cooling—either an all-in-one or a custom loop—there are multiple mounting options for radiators. Both the front and the top can support radiators up to 360mm, and the rear offers space for a 120mm radiator. Hardware options This mid tower supports graphics cards up to 380mm in length. It accommodates motherboards up to E-ATX format. CPU coolers can have a height of up to 175mm. For storage, up to five drives (two 3.5-inch and three 2.5-inch drives) can be installed. The included 850-watt power supply provides ample power for your gaming components.
- Solid crafted aluminium case- Fanless CPU cooling design- Designed for thin mini-ITX motherboard- Suitable for VESA mounting- Recommended max CPU TDP 35W- 120W power adapter included ( AK-ITX05-BK12 only )KujutegurITX-TowerTüüpPCMaterjalAlumiiniumEmaplaadi toetatud kujuteguridMini-ITXToote värvMustAknagaEi2,5" salvede arv1Kaasas toiteplokkJahToiteallikas120 WToiteploki asukohtVälineLaius228 mmSügavus187 mmKõrgus61 mmKaal2,2 kg
FanlessAluminium fanless CPU cooling designOutdoorPascal is perfect for navigation, multimedia, digital signage, automation, Car PC, gaming, medical and outdoor fields, etc.TüüpPCMaterjalAlumiiniumEmaplaadi toetatud kujuteguridUCFFToote värvMustKaasas toiteplokkEiAudiosisendJahAudioväljundJahLaius150 mmSügavus214 mmKõrgus54 mm
- Aluminium fanless CPU cooling design- Ideal for business, education and embedded environments- Form factor: UCFF 4" X 4"- Support two 2.5" SSD/HDD- Support IR remote function- Suitable for VESA mounting- Three antenna fitting holes- Kensington lock- Serial port openingTüüpPCMaterjalAlumiiniumEmaplaadi toetatud kujuteguridUCFFToote värvMustAknagaEi2,5" salvede arv2Sisseehitatud kõlar(id)EiKaasas toiteplokkEiUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahToetatud kõvakettasuurused2.5"Laius240 mmSügavus150 mmKõrgus48 mmKaal1,2 kg
Beautifully crafted and engineered to maximize cooling potential with its amazing expansion flexibiltiy, the Enthoo Pro is the budget friendly full-tower from Phanteks. Embracing many features from the Enthoo Primo, without the price tag. This case has multiple radiator support, removable SSD bracket, closed HDD panel, and velcro cable management. The Enthoo Pro, trying to establish its own solid reputation like the award winning Enthoo Primo.KujutegurFull-TowerTüüpPCMaterjalPlast, Teras5,25" lahtrite arv33,5" lahtrite arv6Emaplaadi toetatud kujuteguridATX,EATX,Mini-ATXToote värvMustAknagaJah2,5" salvede arv7Sisseehitatud kõlar(id)EiCPU jahuti maksimaalne kõrgus19,3 cmGraafikakaardi maksimaalne pikkus47,2 cmKaasas toiteplokkEiToiteploki asukohtPõhiUSB 2.0 portide arv2USB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahInstallitud esiventilaatorid1x 200 mmMaksimaalne esiventilaatorite arv2Toetatud esiventilaatorite läbimõõt120,140,200 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt120,140 mmMaksimaalne ülemiste ventilaatorite arv3Toetatud ülemiste ventilaatorite läbimõõt120,140,200 mmMaksimaalne alumiste ventilaatorite arv2Toetatud alumiste ventilaatorite läbimõõt120,140 mmVentilaatori kiirus1200Toetatud kõvakettasuurused2.5,3.5"Integreeritud kaardilugejaEiJuhtmehaldusJahLähtestusnuppJahLaius235 mmSügavus550 mmKõrgus535 mmJuhendJahKasutusjuhendJahPakendi kaal11,9 kg
After bringing Mini-ITX into mainstream DIY (do it yourself) market in 2009 with the Sugo SG05, SilverStone is looking to define the category again with SG13, a newly evolved design that aims to satisfy every type of computer users. At only 11.5 liters in size, it has suitably small statue for easily integrating into numerous computing environments and will comfortably fit many standard components for general purpose or office builds. For enthusiasts and in keeping with Sugo series’ famed tradition, the SG13’s ability to fit 10.5” long expansion card, standard ATX power supply, and all-in-one liquid cooler in 120mm or 140mm size will help produce amazingly small and powerful systems.KujutegurMinitornTüüpPCMaterjalTeras3,5" lahtrite arv1Emaplaadi toetatud kujuteguridMini-ATX, Mini-DTXToote värvMust, ValgeAknagaEi2,5" salvede arv1Sisemiste 3,5" salvede arv1Laienduspesade arv2CPU jahuti maksimaalne kõrgus6,1 cmToiteploki maksimaalne pikkus15 cmKaasas toiteplokkEiUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahMaksimaalne esiventilaatorite arv1Toetatud esiventilaatorite läbimõõt120,140 mmToetatud kõvakettasuurused2.5,3.5"Laius225 mmSügavus285 mmKõrgus181 mmKaal2,47 kg
