Midi-Tower PC case, tempered glass side panel, mesh front, 5x Kolink Umbra ARGB PWM fans, supports GPUs up to 330 mm, power supply shroud, compatible with ATX motherboards
Showcase case by Phanteks, with side panel and front made of Tempered Glass, supports up to 12x 120mm or 11x 140mm fans, up to four radiators at the same time, motherboards up to E-ATX and GPUs up to 490 mm, D-RGB strips and controller included
CTE T500 TG ARGB Snow Full Tower Chassis The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support up to a 420mm AIO radiator at the front and a maximum 360mm AIO radiator at the rear. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE T500 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE T500 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. Experience the perfect combination of design and performance with our CTE T500 The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support a maximum of a 420mm AIO radiator at the front and a maximum of two 360mm AIO radiators at the front and rear. There's plenty of room to install cooling components, including front and rear fan brackets, top and right fan vents, bottom fan vent, and shroud vent, and the case can accommodate up to eleven 140mm/120mm fans. Other cool details include removable filters, pump and tank support, and Velcro straps for easy cable management. Our CTE T500 Snow is the perfect choice whether you're looking for a custom liquid cooling setup or a dual AIO setup! Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE T500 TG ARGB's versatile interior features two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Support for dual 360mm radiators Our CTE T500 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, allowing users to install up to two 360mm radiators simultaneously at the front and rear. To ensure AIO compatibility, users can install up to one 420mm AIO radiator on the front and up to two 360mm AIO radiator on the front and rear. All your dream cooling components will fit! The CTE T500 Full Tower case has a huge fan and cooler installation capacity: up to eleven 140 mm/120 mm fans and 360 mm AIO coolers in various locations (420 mm AIO cooler at the front). Moreover, equipped front and rear fan brackets and mounting locations on the top, right side and lid ensure easy installation of all desired cooling components. Rock your world with three pre-installed white 140mm CT140 ARGB fans The CTE T500 TG ARGB Snow Full Tower case is equipped with three white 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. We've tested everything, so you don't have to At Thermaltake, we always stress test our products under harsh conditions to ensure product quality. CTE T500 TG ARGB Snow Full Tower Chassis products have been tested at 100% full load for 30 minutes, with the highest-end CPU, GPU and motherboard at the time of testing, compared to a consumer-style configuration, which allowed us to test how the chassis handles in real-world situations.
Showcase case in black, with curved tempered glass, up to 11x 140 mm fans, space for three 420 mm radiators simultaneously, motherboards up to E-ATX, and GPUs up to 480 mm, includes two PWM fan hubs
The Jonsbo D41 Screen ATX case in black is a sleek and versatile option for building a computer. Its closed front design makes for a silent build and it features an integrated 8-inch display. The case is made with tempered glass and can accommodate up to 8 fans and 3 radiators. It can also fit GPUs up to 400mm in length and has a movable power supply for optimal space allocation.
Elegantes und vielseitiges mATX-Gehäuse, geschlossene Front für Silent-Builds, Seitenteil aus Temperglas, bis zu 8 Lüfter und 3 Radiatoren möglich, für GPUs mit max. 400 mm Länge, versetzbares Netzteil für optimale Raumaufteilung
Compact dual-chamber midi-tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case cover for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 on the front panel
The DIGITUS wall-mounted data communications cabinet is equipped with a glazed door and a cable gland in the roof and floor. The steel structure is made of steel sheet up to 1.5 mm thick. It is possible to change the side of the door hinges and adjust the depth. The rack cabinets are delivered unassembled, in a flat package. Assembly is carried out in a few simple steps thanks to the enclosed "step-by-step" instructions. Installation cabinet supplied unassembled Quick installation Door opening angle: 200° 1-point locking on front door 483 mm (19") rack profiles mounted at the front inside the cabinet, galvanized 483 mm (19") rack profiles with depth adjustment 1.1-1.5 thick, high-strength sheet steel, powder-coated Cable inlet with brush strip in the roof and plastic cover in the floor Ventilation slots for active and passive air supply and exhaust Front door: glass, single Side panels: on two sides Assembled: no
XPG INVADER X. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Placering af strømforsyning: Bund. Understøttede diametre for sideventilatorer: 120 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 245 mm, Dybde: 475 mm, Højde: 448 mm
Tootekood: HERITAGE PRO (W)GTIN: 4710562749175Korpused
Compact Midi-Tower with stylish designNine fans ensure efficient airflow, four 120-mm fans already installedSupport for motherboards up to Micro-ATXSpace for graphics cards up to 370 mm and CPU coolers with a height of up to 170 mmPractical carrying handle for transportThe Montech HERITAGE PRO: Stylish Midi-Tower with ample spaceThe Montech HERITAGE PRO is a Midi-Tower that stands out at first glance with its design. It offers you more than enough space to install your high-end components. Fans ensure very good airflow, which efficiently cools your hardware. Additionally, the tower can even be transported with the practical carrying handle.Efficiently cooled with fans and radiatorsEffective cooling is the most important thing in a high-end PC. That's why up to nine fans can be installed in the Montech HERITAGE PRO. The top can accommodate either three 120 mm fans or two 140 mm fans, while the bottom can accommodate three more 120 mm fans. The back also supports a 120 mm fan, as well as two 120 mm fans on the side. This ensures that your hardware stays cool even in performance-intensive games.For the installation of a custom water cooling system, a radiator up to 360 mm can be installed on the top.Space for your high-end hardwareThe Midi-Tower supports the installation of graphics cards up to a size of 370 mm. Motherboards up to the Micro-ATX format can be accommodated.The CPU cooler should not exceed a height of 170 mm. For storing programs and games, two 2.5-inch drives or one 3.5-inch drive can be installed.
Small case for simple systems Two low-profile expansion slots for graphics card Supports ITX-sized motherboards and CPU cooler height up to 38 mm Power supply: 1U Flex up to 150 mm One USB-C port on the I/O panel The Jonsbo NV10 in detail The Jonsbo NV10 is a small case that can be placed on your desk thanks to its light weight and fits into any setup with its simple black design. You can connect an external device to the USB-C port on the I/O panel. Hardware options The mini-tower supports the installation of ITX-sized motherboards. The CPU cooler should not exceed a height of 38 mm. In addition, the two low-profile expansion slots allow for the installation of a low-profile graphics card up to 190 mm. Please note that only a 1U Flex power supply unit no larger than 150 mm can be used.
Lanberg's blank patch panel is designed to be fitted with keystone modules, both network-related like RJ45, RJ11, RJ12, as well as, for audo-video-data eg. HDMI, USB, F, BNC etc.
