Compact Micro-ATX case with wood decor, made of steel and plastic, for Micro-ATX or Mini-ITX motherboards, four-slot GPU up to 415 mm, suitable for 360 mm radiator
With the Lian Li O11 Dynamic Mini V2 Flow, your gaming setup is sure to stand out: Despite its compact design, this mini case offers a spacious interior with enough room to make your vision a reality. Whether you opt for air cooling, an AiO water cooling system, or vertical GPU installation—this case can handle it all and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior allows the installation of powerful components Clean cable management: Cable holders and support for motherboards with back-connect design for tidy cable routing Includes GPU brackets: Graphics card can be installed vertically or horizontally Dust protection: Easy-to-clean dust filters at multiple locations Five pre-installed fans: Three 120 mm reverse-blade fans at the bottom and two on the side The Lian Li O11 Dynamic Mini V2 Flow: A mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 Flow with sample hardware Featuring tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 Flow lets you showcase your hardware. Its compact size allows it to sit comfortably on your desk and become the centerpiece of your gaming setup—all without annoying cable clutter inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable holders, the case enables clean cable routing. A built-in bracket for the heavy 24-pin ATX cable ensures it stays neatly in place, while cleverly positioned straps keep all other cables organized. The drive cages can also double as a hiding spot for cables. This makes cable management effortless—perfect for both beginners building their first gaming PC and pros tired of spending hours on cable routing. Flexible installation for motherboards and AiO water coolers A vertically adjustable motherboard standoff offers you more flexibility when installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The top position supports 240 mm and 360 mm AiO liquid coolers, while the bottom position also allows for a 280 mm radiator. Well cooled, even under full load Supports up to nine fans Space for two water cooling radiators Mesh panel on the top Dust filter on the bottom The fans and radiators provide sufficient cooling for your gaming hardware, even under maximum load. A mesh panel and dust filter help reduce dust build-up inside the case, prolonging the life of your components. Lian Li O11D Mini V2 Flow fans The Flow version of the O11D Mini V2 comes with five fans pre-installed. These 120 mm fans feature reverse blades, ensuring a clean look without sacrificing essential airflow. Ready for peak performance with enough space for large GPUs The interior of the tower is designed to accommodate even large graphics cards up to 400 mm in length—whether mounted horizontally or vertically. The included GPU brackets ensure a secure hold in both scenarios, giving you the freedom to choose your preferred GPU orientation. Supports motherboards in Mini-ITX, mATX, and ATX form factors—including models with rear cable management using a back-connect design. Combined with well-thought-out cable holders and Velcro straps, the result is a tidy, clean look with all cables elegantly routed to the back of the motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O panel The I/O panel module can be attached either on the top or at the bottom front. This lets you place the case wherever you want and still have easy access to the button and ports. If you position the panel on the top, the bottom cover is also removable—improving airflow.
With the Lian Li O11 Dynamic Mini V2 Flow, you can make your gaming setup a real eye-catcher: Despite its compact design, this mini case offers a spacious interior with enough room to make your visions a reality. Whether you prefer air cooling, water cooling with an AiO, or vertical installation of your graphics card, this case allows all that and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior for installing powerful hardware Clean cable management: Cable holders and support for motherboards with back-connect design for tidy routing Includes GPU brackets: Allows you to install your graphics card both vertically and horizontally Dust protection: Easy-to-clean dust filters at multiple locations Five pre-installed fans: Three 120 mm fans at the bottom and two 120 mm fans on the side with reverse blades The Lian Li O11 Dynamic Mini V2 Flow: Mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 Flow with sample hardware Equipped with tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 Flow allows you to showcase your hardware. Thanks to its compact size, it fits easily on your desk and instantly becomes the centerpiece of your gaming setup—without annoying cable clutter inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable holders, the case allows you to route cables cleanly. An integrated holder for the heavy 24-pin ATX cable ensures it stays neat and secure, while cleverly positioned straps keep all other cables bundled together. The drive cages can also be used to hide your cables. This makes cable management effortless—whether you're a beginner building your first gaming PC or a pro who doesn’t want to spend hours organizing cables. Flexible installation for motherboards and AiO water coolers With a vertically adjustable motherboard standoff, the case gives you more flexibility for installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The upper position allows you to mount 240 mm and 360 mm AiO coolers, while the lower position supports a 280 mm radiator as well. Well cooled even under full load Up to nine fans possible Space for two water cooling radiators Mesh panel on the top Dust filter on the bottom The fans and radiators ensure adequate cooling for your gaming hardware, even under full load. A mesh panel and dust filter help reduce dust buildup inside the case, extending the life of your hardware. Lian Li O11D Mini V2 Flow fans The Flow version of the O11D Mini V2 comes with five fans pre-installed. These 120 mm fans are equipped with reverse blades: so you always have a clean look without sacrificing precious airflow. Ready for top performance with space for large GPUs The case interior is designed so that even large graphics cards up to 400 mm fit comfortably—whether installed horizontally or vertically. The included GPU brackets ensure a secure hold in both scenarios. This gives you the freedom to choose your preferred GPU installation. Supports motherboards with Mini-ITX, mATX, and ATX form factors—including models with rear cable management (back-connect design). Combined with thoughtful cable holders and Velcro straps, this results in a tidy, clean look: All connectors are neatly concealed behind the motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O Panel The I/O panel module can be mounted both on top of the case and at the front bottom. This allows you to position the case exactly as you like while always having easy access to the power button and ports. If you mount the panel on top, the bottom cover is also removable—improving airflow.
The Phanteks XT M3 impresses with a space-saving design that provides you with more than enough room for high-end components. Thanks to effective cooling and neat cable management, this case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact Size: Space-saving case for high-end hardware Effective Cooling: Room for up to nine fans Large Radiator: Installation of a 360 mm radiator at the top is possible Tidy Build: Space for clean cable management Back-Connect Support: Supports motherboards with a back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SF case built for greatness. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360 mm radiator can be fitted at the top if you prefer water cooling. Besides fans and a radiator, the mesh on the front also ensures very good airflow, so less hot air accumulates in your case. Your new gaming PC with clean cable management Laying cables neatly isn’t easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also allows for better air circulation. Mini-ITX case built for powerful hardware Even a large graphics card is no problem—the case offers space for a GPU up to 430 mm in length. Note that if you use the maximum length, you cannot install fans at the front. The CPU cooler should not exceed a height of 175 mm, and the power supply should be no longer than 150 mm.
Toetatud emaplaadid: ATX, EATX, micro ATX, Mini-ITX; Piisavalt ruumi tõhusaks jahutamiseks; Optimeeritud õhuringlus; USB-pordid: 2x USB 3.2 Type-A, 1x USB 3.2 Gen 2x2 Type-C
PURE BASE 501 LX | MidiTower | PSU Not included | Fan at front 3x Light Wings LX 120mm PWM; Fan at rear 1x Light Wings LX 140mm PWM | Dimensions 450 x 231 x 463
The FP58 is a high quality device bay designed for those looking to add an optical drive to their PCs while maintaining streamlined look on the front panel. Its aluminum bezel is beautifully finished in hairline brush pattern and anodized to provide great match to either black or silver colored aluminum cases (FP58 is available in black or silver colored versions). The only break on the front bezel styling comes from a discreet cutout that works with slot-loading slim optical drive. In addition to fitting slim optical drive, the FP58 effectively uses the rest of the available 5.25” drive bay space for installation of up to four 2.5” hard drives or SSDs.SPECIAL FeaturesS- High quality brushed aluminum front panel available in black or silver- Discreet styling support slot-loading slim optical drive- Install up to four 2.5” hard drives or SSDs- Compatible with most computer casesWeight & dimensionsWeight 435 gWidth 148 mmDepth 150 mmHeight 42.3 mmDesignBlackStorageNumber of hard drives supported 4Hard drive size 2.5 "
RIGHT SIZES SMOOTHER MOVEMENTThe amazing DASHER EXTENDED offers a bigger space for you to move your mouse! This amazing 900mm wide smooth surface type mouse pad is big enough for large gaming keyboards, with plenty of room left over for your gaming mouse! Definitely the right choice for you who needs bigger room for intense games! In addition, these mouse pads were created with solid sewing edge of the mouse pad ensures long-term durability, preventing peeling or warping problem for you to move your mouse smoothly with consistency!SPEED-TYPE STUNNING MOUSE PADTt eSPORTS's Speed-type mouse pads are incredibly smooth and flat. It allows gamers to have precise movements with comfortable feeling (FPS & RTS & MMORPG Games). Speed-type mouse pads best suit gamers who need to hit targets faster and more efficiently!SEMI-COARSE TEXTURed WEAVE MOUSE PADA smooth surface designed to allow you almost effortless mouse movement. DASHER new edition mouse pads deliver excellent glide characteristics that offer total tracking responsiveness for consistently reliable in-game control!ANTI-SLIP RUBBER BASEA special non slip rubber base ensures that DASHER New Edition mouse pads will not slip as you game, even in the most intense of battles. Play with confidence and never worry about mouse pad lift-off or slipping again - even on glass desks!SpecificationDimension (L x B x H): 900 x 400 x 4 mmMaterial: Cloth Weave MaterialBase: Polyurethan Genre: FPS, RTS, MMORPGColor: BlackOther Features. Ideal for Game Genre requiring rapid movement from point A to point B Type Mouse Pad Material Synthetic Fibre Colour Black Width (mm) 900 Height (mm) 4 Depth (mm) 400
Mounting bracket allows Akasa ITX chassis with Vesa design to be mounted on the wall.The mounting bracket can also work with all kind of VESA mounting device like monitors, LCD TV etc.Toote värvMustMaterjalSPCCKaal215 gLaius134 mmSügavus123 mmKõrgus8,5 mm
Original part number NPC-0855 Product name Natec Office PC case Armadillo, black Producer Natec Class of product Computer case Type of computer case Midi Tower Case type (motherboard type) ATXITXMicroATX Number of external 3,5" bays 2 Number of external 5,25" bays 2 Number of internal 2,5" bays 3 Installed power supply(ies) No Power supply (supplies) power 0 Watt Type of +12V electric plug Does not concern I/O connectors 1x USB 3.02x USB 2.01x stereo mini-jack (earphones output)1x stereo mini-jack (microphone input) Fan(s) speed controller No Maximal qty of fans 2 Width 365 mm Length 180 mm Height 410 mm Side air duct No Tool-free assembly No Colour Black Additional features Max. VGA card length: 320mmMax. CPU cooler height: 161mm
No. of drive bays: 6 Dimensions: 455 x 205 x 475 mm Weight: 5.27 Other features: - Side panel with window YES- Filter under the YES power supply- Filter on the upper panel YES- Filter on the front panel YES- Steel thickness: 0.7 mm- Space for PSU (change from 208mm to 240mm)- Rubber flanges for cable entry holes- All herrings twisted in place of the broken ones- The radiator can not be installed on the front panel
No. of drive bays: 6 Dimensions: 455 x 205 x 475 mm Weight: 5.27 Other features: - Steel thickness: 0.7 mm- Full side and top panel (no ventilation openings on top)- 2mm thick soundproofing panel on the right, left, top and front panels- 2 x fan on the front + 1 x rear fan
Tootja: AKYGA Tootegrupp: arvutikorpus arvutikorpuse tüüp: Frame Ümbrise tüüp (motherboard type): ATX Supported toiteploki standards: ATX external 3,5"sahtleid: 0 external 5,25"sahtleid: 0 external 5,25" väikseid sahtleid: 0 internal 2,5"sahtleid: 1 internal 3,5"sahtleid: 0 intenal 5,25"sahtleid: 0 paigaldatud toiteplokk(ies): Ei maksimum toiteplokke: 2 toiteploki võimsus: andmed puuduvad elektripesade pistikuid Serial ATA: andmed puuduvad ATX toiteploki ühenduspesa tüüp: ei puuduta +12V elektripesa tüüp: ei puuduta I/O Ühendusi: andmed puuduvad ventilaatori kiiruse regulaator: Ei paigaldatud ventilaatoreid: 0 maksimaalne kogus of fans: 4 laius: 390 mm pikkus: 545 mm kõrgus: 420 mm pesade arv korpuses: 6 tk külje õhukanal: Ei tööriistavaba kokkupanek: Ei värv: must Lisaomadused: -Allen screws, button I/O included, -for 6 GPU units Lisainfo: Product Site
