Tootjakoduleht: http://kolink.eu/Home/case-1/midi-tower-2/observatory-lite.html Mõõtmed: 190 x 440 x 400 mm (L x K x S) Kasti mõõtmed: 258 x 498 x 440 mm (L x K x S) Materjal: Teras, karastatud klaas, plastik Pakend: EPE vaht Kaal: umbes 5,5 kg Värv: must Kujutegur: ATX, Micro-ATX, Mini-ITX Võimalikke fänne kokku: 3x 120 mm (ees) 2x 120 mm (katus) 1x 120 mm (taga) Eelinstallitud: 3x 120 mm (ees) ARGB LED 1x 120 mm (taga) ARGB LED Radiaatori kinnitus: 1x 280 mm (ees) Filter: katus, põhi Sõidupesad: 2x 3,5 / 2,5 "(sisemine) 3x 2,5 "(sisemine) PSU: 1x tavaline ATX (valikuline) Laienduspesad: 7 I / O-paneel: 2x USB 2.0 (sisemine ühendus) 1x USB 3.0 (sisemine ühendus) 1x heli sisse / välja RGB / lähtestamise lüliti GPU maksimaalne pikkus: 335 mm (AIO kasutamisel 310 mm) Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU pikkus: 180 mm
Optimized Airflow Design RGB Fusion with ARGB Connector Hub Support Motherboards up to E-ATX Up to 360mm Liquid Cooling Compatible Support Vertical GPU Installation Full-Size Tempered Glass Side Panel With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel Pre-installed 4 ARGB fans C301 GLASS CPU Height : 170mm GPU Length : 400mm PSU Length : 180mm, MidiTower PSU Not included, Front : 120mm x3 (ARGB); Rear : 120mm x1 (ARGB) Dimensions H=486 W=220 D=473 mm
White case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Space for graphics cards up to 460 mm and CPUs with a height of up to 170 mm Installation of up to nine SSDs provides extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that impresses not only with its variety of hardware possibilities but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to earn true admiration. With the LUCA L70, you are perfectly equipped to build your gaming PC exactly the way you want. This midi-tower not only offers you more than enough space to cool your hardware, but it can also be easily disassembled and reassembled. Building your high-end system has never been so easy! Comprehensive cooling options for your new build When you assemble your own PC, cooling is one of the most important points to consider. The LUCA L70 allows you to install up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that in this configuration, the power supply must be mounted on the top of the case. If you prefer to mount the PSU at the bottom, three fans can be installed on the top, and only one on the bottom. Water cooling enthusiasts won't be disappointed either: radiators up to 420 mm can be installed in several places. If the PSU is mounted on the top, you can fit a radiator up to 240 mm there and up to 360 mm at the bottom. If the PSU is mounted at the bottom, there is room for a 420 mm radiator on both the top and the side. To prevent dust from accumulating unnecessarily inside the case, there are dust filters on the top and the bottom. This ensures significantly longer hardware lifespan and saves you time and annoying cleaning. Thanks to the numerous options for installing fans and radiators, efficient cooling is guaranteed, ensuring your high-end hardware always operates at peak performance. Additionally, the tower stands 4 mm off the ground on X-shaped legs, further improving airflow. Case for powerful hardware To ensure even the most demanding games run smoothly on high settings, the LUCA L70 supports powerful graphics cards up to 460 mm in length. An included GPU bracket ensures the card doesn't suffer due to gravity. Vertical installation of the graphics card is also possible, but the necessary accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX and up to 280 mm wide. To avoid messy cabling, motherboards with rear connectors are also supported when the PSU is in the top position, but only in ATX or Micro-ATX format. The CPU height should not exceed 170 mm, while the power supply should be a maximum of 190 mm long. To ensure enough storage for your programs and games, up to nine 2.5-inch drives can be mounted on the side in the LUCA L70. Toolless assembly and disassembly To make installing and swapping your hardware as easy as possible, the LUCA L70 is designed to be completely modular. The front, side, and other parts can be removed and reassembled without additional tools. The motherboard tray can also be repositioned, allowing you to install the motherboard, CPU, and CPU cooler independently of each other.
Especially with compact cases equipped with powerful gaming hardware, the focus should be on optimal cooling. With the Meshlicious, Lian Li's subsidiary Ssupd (Sunny Side Up Design), in collaboration with Ncase, presents an exceptionally small Mini-ITX case whose front, top, and side panels are all made entirely of fine mesh, ensuring virtually unobstructed airflow. The interior is also extremely versatile thanks to its clever design. Graphics cards up to 4 slots high can be installed behind a Mini-ITX motherboard. There is also space for large radiators and numerous data drives, which can be powered by either an SFX or ATX power supply — all in a volume of just 14.67 liters. The features of the Ssupd Meshlicious Full Mesh PCIE 5.0 Edition Mini-ITX Case: Extremely compact Mini-ITX case for high-performance gaming hardware Front, top, and side panels made from fine mesh for optimized airflow Supports GPUs up to 4 slots high and 336 mm long Space for two 140 mm fans or a 280 mm radiator at the front Includes a PCIe 5.0 riser card Compatible with ATX or SFX format power supplies Room for up to two 3.5-inch or seven 2.5-inch drives I/O panel with USB-C 3.1 and USB 3.0 Type-A Ssupd Meshlicious: Simple but functional design Externally, the Ssupd Meshlicious stands out at first glance due to its particularly compact SFF format and its extensive mesh panels. The top, front, and both side panels are made from fine mesh, which provides ample fresh air intake while also being light-permeable. All panels can be easily removed thanks to four pins on each, making the installation of high-end gaming hardware easier. The minimalist I/O panel on the lid features a USB-C 3.1 port, a USB 3.0 Type-A port, and an LED-lit power button. The motherboard connections are accessible as usual from the back of the case. On the inside, the Ssupd Meshlicious proves to be highly adaptable. Those who prefer a powerful gaming setup can install a graphics card up to 4 slots high and 336 mm long vertically behind the motherboard tray. Ssupd provides a PCIe 5.0 riser card for this purpose. The GPU ports then face downward and are accessible via an opening. The cable connections must be angled, and an appropriate HDMI cable is included. Versatile and thoughtfully designed In this configuration, the front can accommodate up to two 140 mm fans or a 280 mm radiator. There is 53 mm of space for CPU coolers, as the motherboard tray can be repositioned. By reducing the GPU height to three or two slots, the motherboard tray can be moved back to make room for CPU coolers up to 73 mm high. Alternatively, a compact 2-slot graphics card of up to 211 mm in length can also be installed horizontally, though this comes at the expense of the front radiator. Below it, a provided bracket can be attached to hold two 3.5-inch or four 2.5-inch drives. When using an optional power supply, you can choose between ATX, SFX, or SFX-L formats. The latter frees up space for another 2.5-inch drive. At the bottom, in both configurations, two 2.5-inch drives can be installed in this versatile and stylish Mini-ITX case.
Extrem kleiner digital adressierbarer RGB-LED-Controller von aqua computer, für bis zu 90 LEDs, inkl. 32 cm RGB-LED-Strips mit 15 LEDs, mit internem USB-Kabel
Darkflash B351 Computer CaseThe Darkflash B351 is a minimalist computer case with over 10 years of industry experience. It features a modest yet elegant design and exceptional heat dissipation properties thanks to well-placed ventilation slots. With its spacious interior, you can easily accommodate all the necessary components for your computer without worrying about space constraints.Wide CompatibilityFurthermore, the Darkflash B351 stands out with its wide compatibility, making it suitable for various motherboard types, including ATX (305 x 244mm), M-ATX (244 x 244mm), and ITX (170 x 170mm). Moreover, you can install a graphics card with a maximum length of 345mm, giving you flexibility in choosing components. Made from high-quality steel, you can be confident that this case will serve you well for a long time while maintaining its quality.Front PanelThe front panel of the Darkflash B351 case not only looks elegant with its vertical vents but is also functional. The Power and Reset buttons, as well as USB 2.0 x 2, USB 3.0 ports, and audio inputs, are arranged in a single line, giving the case a clean appearance and providing easy access to ports and buttons, which is particularly useful in everyday use.Hard DrivesWhen it comes to hard drive placement, the Darkflash B351 offers the user many options. You can freely customize the internal layout to suit your preferences and needs, regardless of how many hard drives you want to install. This is another advantage of this case that allows you to make better use of space and optimize your computer configuration.SpecificationsBrand Darkflash Model B351 Material SPCC 0.5MM Motherboard ATX / M-ATX / ITX Case Size 395 x 200 x 440mm Equipment Size 350 x 185 x 425mm HDD & SSD 1 / 4 PCI Slots 7 VGA Card Max 345mm CPU Cooler Max 155mm Power Supply 140mm Input/Output Power, reset, USB3.0 x 1, USB2.0 x 2, HD Audio Cooling System Front: 120mm x 1, rear: 120mm x 1
Mini-ITX and M-ATX case in black, for motherboards in Mini-ITX or M-ATX format, eight different installation options, external IO hub, mesh grille for improved air intake, up to seven 120mm fans, and two simultaneous 360mm radiators.
Showcase-Gehäuse für WaKü-Enthusiasten, für XL-ATX-Mainboards, mit integrierter Distroplate aus Acryl, Grafikkarten bis 500 mm, Platz für 360 mm x 60 mm Radiatoren, 4x 2,5-Zoll-Festplatten, Seitenwände aus Aluminium
Modulares SFF-Gehäuse für Mini-ITX-Mainboards, robuster Edelstahlrahmen mit variablen Streben, vertikaler Grafikkarteneinbau mit bis zu 323 mm Länge, bis zu 8x 140-mm-Lüfter, Radiatoren bis 280 mm, ATX- oder SFX-Netzteile
Midi-Tower PC case with excellent airflow Supports ATX motherboards and GPUs up to 330 mm in length Stylish glass front and side with side ventilation for optimal airflow Drive bays for up to four 2.5-inch drives Integrated cable management for neat cable organization Comprehensive front I/O with fan control support The Kolink Observatory HF Glass Core Midi-Tower: Merging design and performance Boost the performance of your gaming PC affordably with the Kolink Observatory HF Core PC case. This midi-tower offers comprehensive support for high-performance gaming hardware and numerous cooling options. The intelligently designed interior ensures maximum flexibility and makes assembling your new build easier. The PSU shroud and cable grommets create a tidy aesthetic – clean and functional! Thanks to its side air intakes, the Kolink Observatory HF Core features outstanding airflow to keep your hardware cool. This midi-tower case is made from high-quality materials. The chassis is made of steel, while the right side panel is fully constructed from tempered glass. The side panel is hinged and can swing open, making installation and upgrades easy. Note: This case does not include pre-installed fans. This saves you costs and gives you complete freedom of choice. Space for powerful gaming hardware The Kolink Observatory HF Glass Core provides extensive support for your gaming hardware. It supports ATX, Micro-ATX, and Mini-ITX motherboard form factors for broad compatibility. There are seven PCI expansion slots and room for high-end GPUs up to 330 mm long, as well as 160 mm high CPU coolers. In addition to accommodating power supplies up to 180 mm in length, the case also features four drive bays, allowing you versatile storage solutions. Two bays can fit either 2.5-inch or 3.5-inch drives, while the other two are designed specifically for 2.5-inch SSDs. Optimized airflow for your gaming PC At the front, you can mount up to three 120 mm or 140 mm fans or a radiator up to 360 mm. The top supports either two 120 mm or 140 mm fans, and the PSU shroud can accommodate up to two 120 mm fans. A 120 mm fan or 120 mm radiator can be installed at the rear. ATX case with numerous connectivity options The Kolink Observatory HF Glass Core features one USB 3.0 and two USB 2.0 ports as part of the front I/O panel for your peripheral devices or USB drives. This also includes an HD audio jack as well as power and reset buttons. You can control fan speed using the reset button or via a 3-pin ARGB cable to your main fan.
Compact gaming case, made of high-quality steel, for SFX PSUs and Mini-ITX/Micro-ATX motherboards (Intel and AMD), GPU up to 363 mm and 2x 2.5-inch drives.
Black E-ATX case for NAS, supports up to twelve 3.5-inch HDDs and four 2.5-inch SSDs, eight expansion slots, compatible with graphics cards up to 350 mm in length, CPU coolers up to 160 mm in height, front I/O with 1x USB Type-C, 1x USB Type-A, and a 3.5 mm jack
Tootjainfo: http://kolink.eu/Home/case-1/midi-tower-2/refine.html Mõõtmed: 435 x 205 x 455 mm Materjal: Teras, karastatud klaas, alumiinium, plastik Kaaluge: umbes 5,9 kg Värv: Gunmetal Hall Vormitegur: E-ATX, ATX, Micro-ATX, Mini-ITX Toiteallikas: 1x tavaline ATX (valikuline) Laienduspesad: 7 I / O paneel: 1x USB 3.1 tüüp C (sisemine ühendus) 1x USB 3.0 tüüp A (sisemine ühendus) 2x USB 2.0 (sisemine ühendus) 1x heli sisse / välja 1x RGB- / lähtestuslülitit GPU maksimaalne pikkus: 380 mm Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU sügavus: 200 mm
