The MS FIGHTER V315 case with an attractive design will delight every computer gamer. It is equipped with dust filters and supports water cooling, and RBG fans will make sure that the case "glows" in the dark and raises the gaming experience to a higher level.
Tootekood: U4 Pro Mesh BlackGTIN: 6970620553030Korpused
Edler Midi-Tower von Jonsbo in Schwarz, dezentes Design aus Stahl, mit Seitenteil mit Mesh, Grafikkarten bis 330 mm, bis zu 5x 120-mm-Lüfter möglich, Mainboards bis ATX
Small case for simple systems Two low-profile expansion slots for graphics cards Supports ITX-sized motherboards and CPU cooler height up to 38 mm Power supply: 1U Flex up to 150 mm One USB-C port on the I/O panel The Jonsbo NV10 in detail The Jonsbo NV10 is a small case that can be placed on a desk thanks to its lightweight design, and its simple black aesthetic fits into any setup. You can connect an external device to the USB-C port on the I/O panel. Hardware options The mini-tower supports installing ITX-sized motherboards. The CPU cooler should not exceed a height of 38 mm. The two low-profile expansion slots allow the installation of a low-profile graphics card up to 190 mm in length. When it comes to the power supply, only a 1U Flex power supply is supported, which should not be larger than 150 mm.
The Montech X5M is a mid-tower case that impresses with strong cooling performance and modern design. With a mesh front and pre-installed fans, it is aimed at gamers and PC builders who value airflow and a clean look. Large mesh front panel ensures optimal airflow. Four pre-installed 120 mm fans provide instant cooling performance. Tempered glass side panel offers a clear view of your hardware. Supports motherboards up to mATX and GPUs up to 405 mm in length. Clean cable management thanks to a spacious interior. Strong airflow for stable performance. The Montech X5M PC case is specifically designed for top-tier airflow, ensuring efficient cooling of your components. Thanks to the well-designed mesh panels and optimized airflow, your PC system stays cool and powerful even under heavy loads. With four pre-installed 120 mm fans, a solid cooling base is already provided, reliably protecting your components from overheating. The case is also equipped with high-quality dust filters, protecting your PC components from dirt and extending the lifespan of your system—for long-lasting, clean performance. Modern design with glass side panel. The case combines a clear mesh design with a side window made of tempered glass, allowing you to showcase your hardware while ensuring excellent cooling performance. The addressable RGB lighting of the X5M PC case perfectly highlights your setup. With customizable colors and effects, you can personalize your look and create a unique atmosphere—whether you prefer subtle accents or a spectacular light show. Plenty of space & easy installation. The Montech X5M midi-tower offers the perfect balance between size and functionality. With ample space for high-performance hardware and efficient cooling, it is the ideal choice for gaming builds. The interior of the Montech X5 Mesh provides space for micro-ATX motherboards, graphics cards up to 405 mm in length, and multiple storage drives. Thanks to thoughtful cable management and pre-installed fans, building your system is quick and straightforward.
The Phanteks XT M3 impresses with a space-saving design that provides you with more than enough room for high-end components. Thanks to effective cooling and neat cable management, this case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact Size: Space-saving case for high-end hardware Effective Cooling: Room for up to nine fans Large Radiator: Installation of a 360 mm radiator at the top is possible Tidy Build: Space for clean cable management Back-Connect Support: Supports motherboards with a back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SF case built for greatness. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360 mm radiator can be fitted at the top if you prefer water cooling. Besides fans and a radiator, the mesh on the front also ensures very good airflow, so less hot air accumulates in your case. Your new gaming PC with clean cable management Laying cables neatly isn’t easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also allows for better air circulation. Mini-ITX case built for powerful hardware Even a large graphics card is no problem—the case offers space for a GPU up to 430 mm in length. Note that if you use the maximum length, you cannot install fans at the front. The CPU cooler should not exceed a height of 175 mm, and the power supply should be no longer than 150 mm.
Case type: Cube Case, Midi-Tower Form Factor: Micro-ATX, Mini-ITX Colour: Black Main colour: Black Accent colour: Gold Noise dampening: No Width(exact): 260 Height(exact): 190 Depth(exact): 280 Width: 200 - 300 mm Height: 100 - 200 mm Depth: 200 - 300 mm Material: Plastic, Steel Weight (exact): 2 Weight: up to 2 kg, 2 - 4 kg USB: 2x USB 3.0: 2x Audio output: 1x Audio input: 1x Internal 2.5" bays: 4x Internal 3.5" bays: 3x PCI slots: 2x Motherboard tray: no Remote: no Cable management: no Front LCD/TFT display: no Filter: no Power supply: no Power supply format: ATX Power supply position: Rear Lower Fans pre-installed: 1x 120mm 120mm Fan: 1 Fan colour: Black Fan controller: no Card reader: no Front door: no Hot-swap: no Position I/O: Front/Cover HDD anti-vibration: no Radiator-mounting: no Lighting: no
Midi-Tower bis Micro-ATX, bis zu zehn 120-mm-Lüfter möglich, mit Wasserkühlungsoptionen, GPUs bis 430 mm, CPU-Kühler bis 180 mm Höhe, für Mainboards mit Anschlüssen auf der Rückseite
Black midi-tower for gaming PCs, airflow-optimized thanks to mesh, for motherboards up to ATX, 2x 160 mm ARGB fans pre-installed, supports 360 mm radiators, for GPUs up to 386 mm in length
Kompaktes Aluminiumgehäuse für kleine Systeme, perfekt für Cloud-Lagerung oder HomeOffice, I/O-Panel: 1x USB-C 3.1 /1 x USB-A 3.0/ 1x Audio, Platz für 8+1 Laufwerke, 2x vorinstallierte Lüfter
Compact dual-chamber midi-tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case cover for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 on the front panel
The DIGITUS wall-mounted data communications cabinet is equipped with a glazed door and a cable gland in the roof and floor. The steel structure is made of steel sheet up to 1.5 mm thick. It is possible to change the side of the door hinges and adjust the depth. The rack cabinets are delivered unassembled, in a flat package. Assembly is carried out in a few simple steps thanks to the enclosed "step-by-step" instructions. Installation cabinet supplied unassembled Quick installation Door opening angle: 200° 1-point locking on front door 483 mm (19") rack profiles mounted at the front inside the cabinet, galvanized 483 mm (19") rack profiles with depth adjustment 1.1-1.5 thick, high-strength sheet steel, powder-coated Cable inlet with brush strip in the roof and plastic cover in the floor Ventilation slots for active and passive air supply and exhaust Front door: glass, single Side panels: on two sides Assembled: no
