CPF01 is a PWM fan splitter that connects 2 fans with a single motherboard PWM header. For those who require addition cooling in their systems, CPF01 will be the perfect solution for you. SST-CPF01
PP07 is an individually sleeved extension power cable set that is useful for system with large case or motherboards and to also improve cable management. This is a great addition to any user that wishes to optimize airflow and appearance inside their case. SST-PP07-IDE6R
PP07 is an individually sleeved extension power cable set that is useful for system with large case or motherboards and to also improve cable management. This is a great addition to any user that wishes to optimize airflow and appearance inside their case. SST-PP07-PCIR
Cardreader PKT - CFexpress 2.0 Type A, USB 4.0, USB-C 3.2 Gen 2x2, up to 20 Gb/s connect Angelbird Cardreader PKT is a compact powerhouses built for portability and efficiency. Unleash effortless post-production workflows and get high-speed support for seamless data transfers, external recording with USB-C compatibility, and lag-free editing directly from the card reader. ✅ Fast, secure offloading and editing on the go ✅ USB-C 3.2 Gen 2x2, up to 20 Gb/s connectivity ✅ Solid Connect recessed USB-C connection port for secure data transfer and cable protection ✅ LED Write-Protect-Switch to minimize accidental file deletion or formatting ✅ Free custom engraving option ✅ PKT Cap seals off the device for 360° of rock-solid protection inside and out USB bus-powered no additional power source needed ✅ Built to last extreme temperature, shock, and overload proof ✅ For use with macOS, iPadOS, iOS, Windows, Linux, Android TECHNICAL INFORMATION Host interface: USB-C 3.2 Gen 2x2, 20 Gb/s, USB backwards compatible, physically TB3/4 compatible (TB3/4 speed not supported) Drive interface CFexpress Type A RELIABILITY Certifications CE, RoHS, FCC, UKCA, RCM, REACH, KC PACKAGE CONTENT Card Reader PKT CFexpress A PKT Cap USB-C 4.0 Cable, 32 cm | 12.6 in
Tootja: Gembird Tootegrupp: mälukaardilugeja, adapter mälu tüüp: SecureDigital, mini SecureDigital, MultiMediaCard, SecureDigital kaart suuremahuline (SDHC), SecureDigital kaart eXtended maht (SDXC), Micro SecureDigital (microSD), Micro SecureDigital suuremahuline (microSDHC), Micro SecureDigital kaart eXtended maht (microSDXC), Memory Stick, MagicGate Memory Stick (MG), MagicGate Memory Stick Duo, CompactFlash, CompactFlash II, IBM MicroDrive, MagicGate Memory Stick Pro kaart välised ühendused: 1 x USB I/O Ühendusi on front panel: 1 x USB 2.0 Lisaandmed: Internal multi-Kaardilugeja/writer, No drivers required for Windows XP ja newer, Windows XP/Vista/7/8, Mac OS 8.6/9.X, Linux, Free internal USB port
PP07 is an individually sleeved extension power cable set that is useful for system with large case or motherboards and to also improve cable management. This is a great addition to any user that wishes to optimize airflow and appearance inside their case. SST-PP07-MBW
PP07 is an individually sleeved extension power cable set that is useful for system with large case or motherboards and to also improve cable management. This is a great addition to any user that wishes to optimize airflow and appearance inside their case. SST-PP07-MBR
The SilverStone ECU04-E is a PCI-E Gen 2.0 x2 expansion card with one internal 19pin USB 3.1 connector (supporting two ports). It adds two redriver chips over the original ECU04 design for vastly improved performance over longer cable connections. This ensures dual 10Gbps bandwidth transfer rate can be maintained for up to 2 meters* compared with just 1 meter per USB 3.1’s specified limitation. The ECU04-E is also backwards compatible with USB 3.0/2.0/1.1 and supports UASP (USB Attached SCSI Protocol) for enhanced performance. For operating systems with XHCI (eXtensible Host Controller Interface), the ECU04-E will easily install without the need for any drivers because it also supports XHCI. For those looking to upgrade or add additional USB 3.1 ports or devices to their computer, the ECU04-E is a great starting point. SST-ECU04-E
Description This Card Reader by Delock enables you to read and write 64 different memory cards on your laptop or PC. The Card Reader can be connected to the USB 3.0 interface in order to achieve a faster data transfer rate of up to 5 Gbps (SuperSpeed). Furthermore the USB 3.0-A connector is compatible to its forerunners USB 2.0 and USB 1.1. Thus you can still connect the Card Reader to a USB 2.0 or USB 1.1 port. Specification • Connector: 1 x USB 3.0 Type Micro-B female > 1 x CF slot 1 x SD / MMC slot 1 x Micro SD / M2 slot 1 x MS slot 1 x xD slot • Data transfer rate up to: SuperSpeed USB 5 Gbps, Hi-Speed 480 Mbps, Full-Speed 12 Mbps, Low-Speed 1.5 Mbps • Supports removeable disk mode • Supports PIO, DMA, UDMA mode • Supports UDMA 7 • LED indicator for power and access • Dimensions (LxWxH): ca. 67 x 60 x 12 mm • Hot Swap, Plug & Play • Supports following memory cards: Slot 1 CF I, CF II, CF 4.0, CF Extreme, CF Extreme III, CF Extreme IV, CF Extreme IV UDMA, UDMA Extreme, UDMA 6 Extreme Pro, ULTIMA II, Micro Drive, Magicstor Slot 2 SD, SD High Capacity (SDHC), SDXC, SD Ultra II, SD UDMA II, SD Extreme III, SDHC Turbo, SDHC Ultra, SDHC Extreme, SDHC Extreme III, Turbo-SD, Turbo Mini SD*, Mini SD*, Mini SDHC*, MMC-I, MMC-II, MMC plus, MMC plus Turbo, HS-MMC, HC-MMC, MMCmobile*, MMCmobile* Dual-Voltage, RS-MMC*, RS-MMC 4.0* Slot 3 MS, High Speed MS (HS-MS), MS-ROM, MS Magic Gate, MS Pro, MS-Pro Magic Gate, MS-Duo, MS-Duo Magic Gate, MS-Pro Duo, MS-Pro HighSpeed, MS-Pro HG-Duo, MS-Pro Duo Magic Gate Slot 4 xD, xD type M, xD type H Slot 5 MS Micro (M2) Slot 6 MicroSD, Micro SDHC, Micro SDHC Turbo, T-Flash, MMCmicro *Adapter is required System requirements • Windows Vista/Vista-64/7/7-64/8/8-64/8.1/8.1-64/10/10-64, Mac OS 10.7 • PC or laptop with a free USB Type-A port Package content • USB 3.0 Card Reader All in 1 • Micro USB 3.0 to USB 3.0-A cable • User manual
Dimensions: 24(L) x 15(W) x 75(H) mmSpecial features: Supports USB 2.0, 4 card slots (SD, SDHC(high capacity from 4 GB), Mini SD,micro SD;RS-MMC,MS,MS/MS Pro, MS Duo/MS Pro Duo, MS-Magic Gate, MS Duo Magic Gate, MS Pro Magic Gate,M2 and other card types 3,5cm USB cable File transferring between memory cards (no need to copy the files to the computer) Mini design & light weight, easy for carrying, ideal for notebook users Up to 480 Mbps data transfer speed, 40x faster than USB1.1 No need AC power adapter, low power consumption, plug & play LED indication (Power ON and card reader access)Colour: Black/SilverWarranty Terms: 5 years
LSB01 is a SilverStone designed RGB light strip control box with 8 port signal control. For use in conjunction with SilverStone LS02, it easily expands the amount of lighting that one can control and solves the problem of insufficient RGB 4pin connectors. It can control light via motherboard RGB software or other RGB 4pin host. Apart from this, for those enthusiast‘s motherboard that lacks RGB 4pin or without another signal source, the LSB01 can still offer direct control via case switch with an included cable adapter.
Lexar Professional Workflow CFexpress 4.0 Type B Card Reader, designed to pair with Lexar Professional Workflow, USB-C cable/ USB-C to USB-A adapter, Compatible with PC Computers, Laptop, Tablet, Smartphone. Lexar Professional Workflow CFexpress 4.0 Type B Card Reader, designed to pair with Lexar Professional Workflow, USB-C cable/ USB-C to USB-A adapter, Compatible with PC Computers, Laptop, Tablet, Smartphone Made to pair with the Lexar Professional Workflow and the Lexar Professional CFexpress 4.0 Type B Card Diamond Series, the Workflow CFexpress 4.0 Type B Card Reader supports transfer speeds up to 40GBps to maximize your workflow. Made to pair with the Lexar Professional Workflow and the Lexar Professional CFexpress 4.0 Type B Card Diamond Series, the Workflow CFexpress 4.0 Type B Card Reader supports speeds up to 40Gbps to maximize your workflow and an aluminum finish that offers superior scratch resistance even with heavy use on location. Supports the latest generation CFexpress 4.0 and backwards-compatible with CFexpress 2.0 A specially crafted finish offers superior scratch resistance, making it great for on-location shoots Compatible with Lexar Professional Workflow and Workflow Go which lets you customize readers and portable SSDs for maximum efficiency Includes a USB-C to USB-C cable to easily connect with all your Type C devices
