PP07 is an individually sleeved extension power cable set that is useful for system with large case or motherboards and to also improve cable management. This is a great addition to any user that wishes to optimize airflow and appearance inside their case. SST-PP07-IDE6R
Description This Card Reader by Delock enables you to read and write 64 different memory cards on your laptop or PC. The Card Reader can be connected to the USB 3.0 interface in order to achieve a faster data transfer rate of up to 5 Gbps (SuperSpeed). Furthermore the USB 3.0-A connector is compatible to its forerunners USB 2.0 and USB 1.1. Thus you can still connect the Card Reader to a USB 2.0 or USB 1.1 port. Specification • Connector: 1 x USB 3.0 Type Micro-B female > 1 x CF slot 1 x SD / MMC slot 1 x Micro SD / M2 slot 1 x MS slot 1 x xD slot • Data transfer rate up to: SuperSpeed USB 5 Gbps, Hi-Speed 480 Mbps, Full-Speed 12 Mbps, Low-Speed 1.5 Mbps • Supports removeable disk mode • Supports PIO, DMA, UDMA mode • Supports UDMA 7 • LED indicator for power and access • Dimensions (LxWxH): ca. 67 x 60 x 12 mm • Hot Swap, Plug & Play • Supports following memory cards: Slot 1 CF I, CF II, CF 4.0, CF Extreme, CF Extreme III, CF Extreme IV, CF Extreme IV UDMA, UDMA Extreme, UDMA 6 Extreme Pro, ULTIMA II, Micro Drive, Magicstor Slot 2 SD, SD High Capacity (SDHC), SDXC, SD Ultra II, SD UDMA II, SD Extreme III, SDHC Turbo, SDHC Ultra, SDHC Extreme, SDHC Extreme III, Turbo-SD, Turbo Mini SD*, Mini SD*, Mini SDHC*, MMC-I, MMC-II, MMC plus, MMC plus Turbo, HS-MMC, HC-MMC, MMCmobile*, MMCmobile* Dual-Voltage, RS-MMC*, RS-MMC 4.0* Slot 3 MS, High Speed MS (HS-MS), MS-ROM, MS Magic Gate, MS Pro, MS-Pro Magic Gate, MS-Duo, MS-Duo Magic Gate, MS-Pro Duo, MS-Pro HighSpeed, MS-Pro HG-Duo, MS-Pro Duo Magic Gate Slot 4 xD, xD type M, xD type H Slot 5 MS Micro (M2) Slot 6 MicroSD, Micro SDHC, Micro SDHC Turbo, T-Flash, MMCmicro *Adapter is required System requirements • Windows Vista/Vista-64/7/7-64/8/8-64/8.1/8.1-64/10/10-64, Mac OS 10.7 • PC or laptop with a free USB Type-A port Package content • USB 3.0 Card Reader All in 1 • Micro USB 3.0 to USB 3.0-A cable • User manual
LSB01 is a SilverStone designed RGB light strip control box with 8 port signal control. For use in conjunction with SilverStone LS02, it easily expands the amount of lighting that one can control and solves the problem of insufficient RGB 4pin connectors. It can control light via motherboard RGB software or other RGB 4pin host. Apart from this, for those enthusiast‘s motherboard that lacks RGB 4pin or without another signal source, the LSB01 can still offer direct control via case switch with an included cable adapter.
PP07 is an individually sleeved extension power cable set that is useful for system with large case or motherboards and to also improve cable management. This is a great addition to any user that wishes to optimize airflow and appearance inside their case. SST-PP07-MBW
PP07 is an individually sleeved extension power cable set that is useful for system with large case or motherboards and to also improve cable management. This is a great addition to any user that wishes to optimize airflow and appearance inside their case. SST-PP07-MBR
With SATA Revision 3.0 compliant devices now more popular than ever, SilverStone has created two suitable cables to match the higher bandwidth requirement with the CP07 (with 180° connector) and CP08 (with 90° connector). Unlike traditional SATA cables with metal clips that loose effectiveness with repeated usage due to scratching, the CP07 and CP08 achieves secure connection by utilizing precision designed and manufactured connector. Wrapped in attractive black / white and metallic layer for EMI protection, these new cables are great companions for running SATA 6Gb/s capable devices with optimum stability and style. SST-CP08
Ühilduvad mälukaardidmicroSD (TransFlash),microSDHC,microSDXC,SD,SDHC,SDXCSisemineEiSIM-kaardi tugiEiLiidese tüüpUSB 3.0Andmeedastuskiirus5000 Mbit/sToetatud Windowsi operatsioonisüsteemidJahToetatud Maci operatsioonisüsteemidJahToetatud Linuxi operatsioonisüsteemidJahToote värvValgePakendi tüüpKarpJuhendJahSertifikaatRoHS, CEPakendi mõõtmed (l x s x k)107 x 46 x 200 mmIsehäälestuvJah
The SilverStone ECU04-E is a PCI-E Gen 2.0 x2 expansion card with one internal 19pin USB 3.1 connector (supporting two ports). It adds two redriver chips over the original ECU04 design for vastly improved performance over longer cable connections. This ensures dual 10Gbps bandwidth transfer rate can be maintained for up to 2 meters* compared with just 1 meter per USB 3.1’s specified limitation. The ECU04-E is also backwards compatible with USB 3.0/2.0/1.1 and supports UASP (USB Attached SCSI Protocol) for enhanced performance. For operating systems with XHCI (eXtensible Host Controller Interface), the ECU04-E will easily install without the need for any drivers because it also supports XHCI. For those looking to upgrade or add additional USB 3.1 ports or devices to their computer, the ECU04-E is a great starting point. SST-ECU04-E
Lexar Professional Workflow CFexpress 4.0 Type B Card Reader, designed to pair with Lexar Professional Workflow, USB-C cable/ USB-C to USB-A adapter, Compatible with PC Computers, Laptop, Tablet, Smartphone. Lexar Professional Workflow CFexpress 4.0 Type B Card Reader, designed to pair with Lexar Professional Workflow, USB-C cable/ USB-C to USB-A adapter, Compatible with PC Computers, Laptop, Tablet, Smartphone Made to pair with the Lexar Professional Workflow and the Lexar Professional CFexpress 4.0 Type B Card Diamond Series, the Workflow CFexpress 4.0 Type B Card Reader supports transfer speeds up to 40GBps to maximize your workflow. Made to pair with the Lexar Professional Workflow and the Lexar Professional CFexpress 4.0 Type B Card Diamond Series, the Workflow CFexpress 4.0 Type B Card Reader supports speeds up to 40Gbps to maximize your workflow and an aluminum finish that offers superior scratch resistance even with heavy use on location. Supports the latest generation CFexpress 4.0 and backwards-compatible with CFexpress 2.0 A specially crafted finish offers superior scratch resistance, making it great for on-location shoots Compatible with Lexar Professional Workflow and Workflow Go which lets you customize readers and portable SSDs for maximum efficiency Includes a USB-C to USB-C cable to easily connect with all your Type C devices
This 6-port Media Card Reader can be conveniently positioned at the front of your PC enabling the reading of all popular memory cards in a single location. Compatible with high capacity memory cards (SDHC), has dedicated ports for microSD and M2 ports, this eliminates the need for any card adapters.Additional USB port provides extra connectivity for convenient data transfer from USB memory sticks or USB enabled mobile phones. Designed to fit 3.5” PC bay, contains two front fascia panels, choose mat black or classic white. Two LED’s indicate power on, card in and data transfer.SisemineJahSIM-kaardi tugiEiToetatud draivilahtrid3.5"Liidese tüüpUSB 2.0Andmeedastuskiirus480 Mbit/sÜhilduvad operatsioonisüsteemidWindows XP / Visa / 7
