Seadmekapid

Power plug IEC320 C20 16A/250V Sockets: Front: 8 x IEC320 C13 10A/250V, Back: 8 x IEC320 C13 10A/250V Additional components: LED control Maximum unit load 16A Unit rated power 3680W Dimensions (L x W x D) [mm] 483 x 44 x 112 Net weight: 2.0kg Gross weight: 2.5kg Housing: 1U, black aluminium

Basic parameters Material: steel sheet Front door: one - piece perforated or two - piece perforated Rear door: one - piece perforated, two - piece perforated, perforated shortened wall Side walls: steel sheet Load capacity: 1000 kg IP rating: 20 Colour: light grey RAL 7035 or black RAL 7021 Maximum spacing of mounting sections depending on cabinet depth: cabinets with a depth of 1000 mm - maximum spacing: 872 mm cabinets with a depth of 1200 mm - maximum spacing: 1072 mm Regulatory compliance: EIA-310-D, IEC 60297-1, IEC 60297-2, ROHS Included in delivery: brush strip set of M6 assembly bolts (16 pcs) set of floor - leveller feet 1,5 m edge sealing 2 pairs of mounting sections

The module is to be mounted inside the controller. It has RJ9 (4P4C) connector for 1-wire sensors. Dimensions: 44x23x15 The module is supplied with a connection cable. The 1-wire sensors can be connected to the controller only via an additional EE323 extension module (1-wire module). The 1-wire is a serial bus and allows connecting sensors in a daisy chain (from sensor to sensor). One controller can support up to 20 1-wire sensors. The length of the 1-wire bus should not exceed 100m. It is a UTP Cat5e suggested as a 1-wire bus cable

Any sensors from the table below can be connected to 4 analogue inputs (A1-A4) of the controller or inputs (A1-A8) in additional EE321 extension modules (extension module with additional 8 analogue inputs). One controller can support up to 28 analogue sensors. If longer than included cable is needed, it is a UTP Cat5e or flat cable suggested. Requires water sensitive cable ES361 Dimensions: 60x18x18 Maximum cable length: 100m (2m included)

• Material: steel sheet • Front door: No • Rear door: No • Side walls: steel sheet • Load capacity: 600 kg • IP rating: 20 • Weight: 56 kg • Colour: RAL 9005

Basic parameters Material: steel sheet Front door: one - piece perforated or two - piece perforated Rear door: one - piece perforated, two - piece perforated, perforated shortened wall Side walls: steel sheet Load capacity: 1000 kg IP rating: 20 Colour: light grey RAL 7035 or black RAL 7021 Maximum spacing of mounting sections depending on cabinet depth: cabinets with a depth of 1000 mm - maximum spacing: 872 mm cabinets with a depth of 1200 mm - maximum spacing: 1072 mm Regulatory compliance: EIA-310-D, IEC 60297-1, IEC 60297-2, ROHS Included in delivery: brush strip set of M6 assembly bolts (16 pcs) set of floor - leveller feet 1,5 m edge sealing 2 pairs of mounting sections

Basic parameters Material: steel sheet Front door: one - piece perforated or two - piece perforated Rear door: one - piece perforated, two - piece perforated, perforated shortened wall Side walls: steel sheet Load capacity: 1000 kg IP rating: 20 Colour: light grey RAL 7035 or black RAL 7021 Maximum spacing of mounting sections depending on cabinet depth: cabinets with a depth of 1000 mm - maximum spacing: 872 mm cabinets with a depth of 1200 mm - maximum spacing: 1072 mm Regulatory compliance: EIA-310-D, IEC 60297-1, IEC 60297-2, ROHS Included in delivery: brush strip set of M6 assembly bolts (16 pcs) set of floor - leveller feet 1,5 m edge sealing 2 pairs of mounting sections

Basic parameters Material: steel sheet Front door: one - piece perforated or two - piece perforated Rear door: one - piece perforated, two - piece perforated, perforated shortened wall Side walls: steel sheet Load capacity: 1000 kg IP rating: 20 Colour: light grey RAL 7035 or black RAL 7021 Maximum spacing of mounting sections depending on cabinet depth: cabinets with a depth of 1000 mm - maximum spacing: 872 mm cabinets with a depth of 1200 mm - maximum spacing: 1072 mm Regulatory compliance: EIA-310-D, IEC 60297-1, IEC 60297-2, ROHS Included in delivery: brush strip set of M6 assembly bolts (16 pcs) set of floor - leveller feet 1,5 m edge sealing 2 pairs of mounting sections

Index no. 11341B65.18-2,06-6 Power plug IEC 60309 32A/400V Cable H05VV-F 5 x 6.0 mm2, 3.0 m, black Sockets 18 x IEC320 C13 10A/250V 6 x IEC320 C16 16A/250V Additional components 3 x amperemeter 3 x current circuit breaker 32A Maximum unit load 3x32A Unit rated power 3x7360 W Dimensions (L x W x D) [mm] 1681 x 44 x 68 Net weight [kg] 6.0 Gross weight [kg] 6.5 Housing 0U, black aluminium Fixed brackets type 44 Brackets for BKT 4DC cabinets (set) Index: 111SA200011.3 Brackets for BKT SRS/SSRS cabinets (must be ordered separatley)

Features:Connector Type: unshielded RJ45Cable Form Type: ANSI/TIA-568BCable Type: U/UTP Cat 6 AWG 24 LSZHSheath Material: PVCStandards:PN-EN 50173, ISO/IEC 11801, ANSI/TIA-568, IEC 60332-1, IEC 60754-2, IEC 61034, RoHS

Basic parameters Material: steel sheet Front door: one - piece perforated or two - piece perforated Rear door: one - piece perforated, two - piece perforated, perforated shortened wall Side walls: steel sheet Load capacity: 1000 kg IP rating: 20 Colour: light grey RAL 7035 or black RAL 7021 Maximum spacing of mounting sections depending on cabinet depth: cabinets with a depth of 1000 mm - maximum spacing: 872 mm cabinets with a depth of 1200 mm - maximum spacing: 1072 mm Regulatory compliance: EIA-310-D, IEC 60297-1, IEC 60297-2, ROHS Included in delivery: brush strip set of M6 assembly bolts (16 pcs) set of floor - leveller feet 1,5 m edge sealing 2 pairs of mounting sections

Features:Connector Type: unshielded RJ45Cable Form Type: ANSI/TIA-568BCable Type: U/UTP Cat 6 AWG 24 LSZHSheath Material: PVCStandards:PN-EN 50173, ISO/IEC 11801, ANSI/TIA-568, IEC 60332-1, IEC 60754-2, IEC 61034, RoHS

Features:Connector Type: unshielded RJ45Cable Form Type: ANSI/TIA-568BCable Type: U/UTP Cat 6 AWG 24 LSZHSheath Material: PVCStandards:PN-EN 50173, ISO/IEC 11801, ANSI/TIA-568, IEC 60332-1, IEC 60754-2, IEC 61034, RoHS

Välitingimustesse paigaldamiseks – püsivalt maapinnale kinnitatavPaigaldatud seadmete kaitse ilmastikutingimuste ja volitamata isikute juurdepääsu eestTopeltseinaga konstruktsioon, mille vahele jääb õhukiht (isolatsioon)Korpus valmistatud alumiiniumplekist, värvitud välitingimustele sobiva anti-graffiti RAL 7047 tooniga värvigaVasak sein varustatud sulgplaadiga, kuhu saab vajadusel paigaldada konditsioneeriPolüuretaantihend ukse siseküljel ja sisekatusegaKolmepunktiline lukustussüsteemSulgplaadid sisekatuses ventilatsioonisüsteemi (ventilaator ja filtri rest) paigaldamiseksPühendatud kinnituskronsteinid TH 35 mm standardile vastavate reedkontaktorite, kütteseadmete ja termostaatide paigaldamiseksKaks komplekti 19” paigaldusprofiile: 16U + 14U (ülemine kamber + alumine kamber)Eraldussein ülemise ja alumise kambri vahelPõrandasse paigaldatud vahtkaablikraeKaks vaskmaanduslatti (üks mõlemas kambris) – kõik kapi komponendid on elektriliselt ühendatud ühte keskpunktiUkse avanemispiirajaUkse avamise andurSang koos spetsiaalse võtmekoodiga sisetükigaTransportaasad sisemises katusesKüttesüsteem (valikuline)Võimalus paigaldada ventilaatorid sisekatusesse, mida juhib temperatuuri muutumisest sõltuv pöörlemiskiiruse regulaator (2-ventilaatoriline jahutussüsteem)BKT toitejaotusüksus 19”, 9x NF C61-314 (PL/FR standard), DIN 49441 pistik (unischuko), 16 A / 250 V, punane ON/OFF-lüliti koos kaitsmega, kaabel 2,5 m (valikuline)

Application For indoor installation Protection of mounted active and passive devices against unauthorized access Protection of mounted devices against adverse ambient factors (dust, oil, etc.)Standards RoHS – Restriction of dangerous substances penetrating to the environment from electrical and electronic equipment waste EN ISO 9001:2008 – Quality management EN ISO 14001:2004 - Environmental management PN-EN 60529 – Degrees of protection provided by enclosures (IP code)Features Two sets of 19” 42U mounting profiles Removable sectional floor with a foam-sealed cable penetration Three point closing system Handles with inserts, code 1333 One side wall included (second wall: optional accessory) 100mm tall pedestal with knock-out cable penetration blanks Max. static load : 1500kg The door can be mounted right and left The ability to connect cabinets in series after the use of dedicated mounting elements Roof with blanc for a foam-sealed cable penetration and lifting lug installation Door opening angle: ca. 270° All parts electrically bondedConstruction Galvanised steel sheet Steel section frame Metal sheet/glass front/back door Two component polyurethane gasket (hot melt foamed-in-place) RAL7035 colour IP54 protection degree

BKT EGO series AC units are intended for cooling racks in rooms with protection rating min. IP54 to protect electric and electronic equipment installed the cabinet/ rack against heat generated by them. Side installation to a wall or a cabinet door Electronic temperature controller with a display AC unit operating range from +20°C to +50°C The temperature setting range inside the cabinet from +20°C to +46°C Factor setting of temperature inside the cabinet +35°C

BKT EGO series AC units are intended for cooling racks in rooms with protection rating min. IP54 to protect electric and electronic equipment installed the cabinet/ rack against heat generated by them. Side installation to a wall or a cabinet door Electronic temperature controller with a display AC unit operating range from +20°C to +50°C The temperature setting range inside the cabinet from +20°C to +46°C Factor setting of temperature inside the cabinet +35°C

Application For indoor installation Protection of mounted active and passive devices against unauthorized access Protection of mounted devices against adverse ambient factors (dust, oil, etc.)Standards RoHS – Restriction of dangerous substances penetrating to the environment from electrical and electronic equipment waste EN ISO 9001:2008 – Quality management EN ISO 14001:2004 - Environmental management PN-EN 60529 – Degrees of protection provided by enclosures (IP code)Features Two sets of 19” 42U mounting profiles Removable sectional floor with a foam-sealed cable penetration Three point closing system Handles with inserts, code 1333 One side wall included (second wall: optional accessory) 100mm tall pedestal with knock-out cable penetration blanks Max. static load : 1500kg The door can be mounted right and left The ability to connect cabinets in series after the use of dedicated mounting elements Roof with blanc for a foam-sealed cable penetration and lifting lug installation Door opening angle: ca. 270° All parts electrically bondedConstruction Galvanised steel sheet Steel section frame Metal sheet/glass front/back door Two component polyurethane gasket (hot melt foamed-in-place) RAL7035 colour IP54 protection degree

BKT EGO series AC units are intended for cooling racks in rooms with protection rating min. IP54 to protect electric and electronic equipment installed the cabinet/ rack against heat generated by them. Side installation to a wall or a cabinet door Electronic temperature controller with a display AC unit operating range from +20°C to +50°C The temperature setting range inside the cabinet from +20°C to +46°C Factor setting of temperature inside the cabinet +35°C

BKT EGO series AC units are intended for cooling racks in rooms with protection rating min. IP54 to protect electric and electronic equipment installed the cabinet/ rack against heat generated by them. Side installation to a wall or a cabinet door Electronic temperature controller with a display AC unit operating range from +20°C to +50°C The temperature setting range inside the cabinet from +20°C to +46°C Factor setting of temperature inside the cabinet +35°C

BKT EGO series AC units are intended for cooling racks in rooms with protection rating min. IP54 to protect electric and electronic equipment installed the cabinet/ rack against heat generated by them. Side installation to a wall or a cabinet door Electronic temperature controller with a display AC unit operating range from +20°C to +50°C The temperature setting range inside the cabinet from +20°C to +46°C Factor setting of temperature inside the cabinet +35°C

Application For indoor installation Protection of mounted active and passive devices against unauthorized access Protection of mounted devices against adverse ambient factors (dust, oil, etc.)Standards RoHS – Restriction of dangerous substances penetrating to the environment from electrical and electronic equipment waste EN ISO 9001:2008 – Quality management EN ISO 14001:2004 - Environmental management PN-EN 60529 – Degrees of protection provided by enclosures (IP code)Features Two sets of 19” 42U mounting profiles Removable sectional floor with a foam-sealed cable penetration Three point closing system Handles with inserts, code 1333 One side wall included (second wall: optional accessory) 100mm tall pedestal with knock-out cable penetration blanks Max. static load : 1500kg The door can be mounted right and left The ability to connect cabinets in series after the use of dedicated mounting elements Roof with blanc for a foam-sealed cable penetration and lifting lug installation Door opening angle: ca. 270° All parts electrically bondedConstruction Galvanised steel sheet Steel section frame Metal sheet/glass front/back door Two component polyurethane gasket (hot melt foamed-in-place) RAL7035 colour IP54 protection degree

BKT EGO series AC units are intended for cooling racks in rooms with protection rating min. IP54 to protect electric and electronic equipment installed the cabinet/ rack against heat generated by them. Side installation to a wall or a cabinet door Electronic temperature controller with a display AC unit operating range from +20°C to +50°C The temperature setting range inside the cabinet from +20°C to +46°C Factor setting of temperature inside the cabinet +35°C

BKT EGO series AC units are intended for cooling racks in rooms with protection rating min. IP54 to protect electric and electronic equipment installed the cabinet/ rack against heat generated by them. Side installation to a wall or a cabinet door Electronic temperature controller with a display AC unit operating range from +20°C to +50°C The temperature setting range inside the cabinet from +20°C to +46°C Factor setting of temperature inside the cabinet +35°C

BKT EGO series AC units are intended for cooling racks in rooms with protection rating min. IP54 to protect electric and electronic equipment installed the cabinet/ rack against heat generated by them. Side installation to a wall or a cabinet door Electronic temperature controller with a display AC unit operating range from +20°C to +50°C The temperature setting range inside the cabinet from +20°C to +46°C Factor setting of temperature inside the cabinet +35°C

Application For indoor installation Protection of mounted active and passive devices against unauthorized access Protection of mounted devices against adverse ambient factors (dust, oil, etc.)Standards RoHS – Restriction of dangerous substances penetrating to the environment from electrical and electronic equipment waste EN ISO 9001:2008 – Quality management EN ISO 14001:2004 - Environmental management PN-EN 60529 – Degrees of protection provided by enclosures (IP code)Features Two sets of 19” 42U mounting profiles Removable sectional floor with a foam-sealed cable penetration Three point closing system Handles with inserts, code 1333 One side wall included (second wall: optional accessory) 100mm tall pedestal with knock-out cable penetration blanks Max. static load : 1500kg The door can be mounted right and left The ability to connect cabinets in series after the use of dedicated mounting elements Roof with blanc for a foam-sealed cable penetration and lifting lug installation Door opening angle: ca. 270° All parts electrically bondedConstruction Galvanised steel sheet Steel section frame Metal sheet/glass front/back door Two component polyurethane gasket (hot melt foamed-in-place) RAL7035 colour IP54 protection degree

BKT EGO series AC units are intended for cooling racks in rooms with protection rating min. IP54 to protect electric and electronic equipment installed the cabinet/ rack against heat generated by them. Side installation to a wall or a cabinet door Electronic temperature controller with a display AC unit operating range from +20°C to +50°C The temperature setting range inside the cabinet from +20°C to +46°C Factor setting of temperature inside the cabinet +35°C

Environmental conditions have a significant effect on the working of the equipment fitted inside the cabinet. For cabinet heating when cold and cooling down to a safe temperature, i.e. working temperature, when hot, depending on the total power loss. BKT provides heating and cooling systems or venting and air conditioning systems and heaters equipped with a thermal fan.

Material: steel sheet Front door: 2 x perforated Rear door: 2 x perforated Side walls: steel sheet Two sections separated by a shelf It is possible to bring cables directly to each section IP rating: 20 Weight: 136 kg Colour: RAL 7035

Application For indoor installation Protection of mounted active and passive devices against unauthorized access Protection of mounted devices against adverse ambient factors (dust, oil, etc.)Standards RoHS – Restriction of dangerous substances penetrating to the environment from electrical and electronic equipment waste EN ISO 9001:2008 – Quality management EN ISO 14001:2004 - Environmental management PN-EN 60529 – Degrees of protection provided by enclosures (IP code)Features Two sets of 19” 42U mounting profiles Removable sectional floor with a foam-sealed cable penetration Three point closing system Handles with inserts, code 1333 One side wall included (second wall: optional accessory) 100mm tall pedestal with knock-out cable penetration blanks Max. static load : 1500kg The door can be mounted right and left The ability to connect cabinets in series after the use of dedicated mounting elements Roof with blanc for a foam-sealed cable penetration and lifting lug installation Door opening angle: ca. 270° All parts electrically bondedConstruction Galvanised steel sheet Steel section frame Metal sheet/glass front/back door Two component polyurethane gasket (hot melt foamed-in-place) RAL7035 colour IP54 protection degree

Application For indoor installation Protection of mounted active and passive devices against unauthorized access Protection of mounted devices against adverse ambient factors (dust, oil, etc.)Standards RoHS – Restriction of dangerous substances penetrating to the environment from electrical and electronic equipment waste EN ISO 9001:2008 – Quality management EN ISO 14001:2004 - Environmental management PN-EN 60529 – Degrees of protection provided by enclosures (IP code)Features Two sets of 19” 42U mounting profiles Removable sectional floor with a foam-sealed cable penetration Three point closing system Handles with inserts, code 1333 One side wall included (second wall: optional accessory) 100mm tall pedestal with knock-out cable penetration blanks Max. static load : 1500kg The door can be mounted right and left The ability to connect cabinets in series after the use of dedicated mounting elements Roof with blanc for a foam-sealed cable penetration and lifting lug installation Door opening angle: ca. 270° All parts electrically bondedConstruction Galvanised steel sheet Steel section frame Metal sheet/glass front/back door Two component polyurethane gasket (hot melt foamed-in-place) RAL7035 colour IP54 protection degree

Kaablite ja juhtmete turvaliseks kinnitamiseks ja vedamiseks on kaablihoidikud asendamatud. Pole tähtis, kas peate üksikuid kaableid ja juhtmeid usaldusväärselt kinni hoidma või mitut juhtmeid paralleelselt vedama. Proper cable separation from the cabinets front panels For management, routing and concealment of copper and optical cable bundles Delivery includes two mounting brackets Colour: RAL 7035

Application For indoor installation Protection of mounted active and passive devices against unauthorized access Protection of mounted devices against adverse ambient factors (dust, oil, etc.)Standards RoHS – Restriction of dangerous substances penetrating to the environment from electrical and electronic equipment waste EN ISO 9001:2008 – Quality management EN ISO 14001:2004 - Environmental management PN-EN 60529 – Degrees of protection provided by enclosures (IP code)Features Two sets of 19” 42U mounting profiles Removable sectional floor with a foam-sealed cable penetration Three point closing system Handles with inserts, code 1333 One side wall included (second wall: optional accessory) 100mm tall pedestal with knock-out cable penetration blanks Max. static load : 1500kg The door can be mounted right and left The ability to connect cabinets in series after the use of dedicated mounting elements Roof with blanc for a foam-sealed cable penetration and lifting lug installation Door opening angle: ca. 270° All parts electrically bondedConstruction Galvanised steel sheet Steel section frame Metal sheet/glass front/back door Two component polyurethane gasket (hot melt foamed-in-place) RAL7035 colour IP54 protection degree