Replace HDDs with the highly-efficient Intel SSD D3-S4520 to reduce storage operating costs and accelerate read-intensive and mixed-use workloads with power-efficient performance.Featuring the latest-generation 144-Layer, TLC, Intel 3D NAND, Intel SSD D3-S4520 Series is designed to reduce storage operating cost, accelerate read-intensive and mixed workloads with power-efficient performance, and improve overall system reliability and flexibility, while preserving legacy infrastructure.These reliable SSDs meet demanding service level requirements while increasing server efficiency. The fourth-generation Intel controller and innovative firmware paired with the latest generation of Intel 3D NAND make the SSD D3-S4520 Series compatible with existing SATA deployments for an easy storage upgrade.
The WPR406R is a professional 19 wall mount metal rack compliant to ANSI/EIA RS-310D, DIN41491, IEC 60297 standards. It is a solid construction with a cold rolled steel 1,5 mm thick frame and 1,2 mm thick plates. The WPR406R comes fully assembled and can easily be mounted on the wall. The 19 mounting profile with punched square holes for use with snap-in cage nuts in combination with the printed unit measurement indicators ensure easy fitting of the equipment. The tempered smokey grey glass door is fitted with a keylock to keep the equipment only accessible for authorized persons. The removable sides and back panel allow easy installing and cabling of the equipment while the in depth adjustable 19 profiles provide great flexibility for installing equipment depending on its depth. Features: Stores up to 6 units of 19 Equipment Integrated ventilation grid on top Removable sides for easy installing & cabling Punched square holes for use with snap-in cage nuts Front in depth adjustable 19 profiles (max 410 mm) Loading capacity of 60 kg Cable entry on top, back & bottom (closable) Removable rear panel Keylock with butterfly handle
To meet the computing demands of next-gen Intel or AMD workstation and high-end desktop platforms requiring the use of DDR5 Registered DIMMs, Kingston FURY Renegade Pro DDR5 RDIMM provides creators, engineering and data science professionals with high-performance memory normally reserved for gamers, without sacrificing the data integrity features and quality.DDR5 registered DIMMs support ECC, capable of detecting and correcting multi-bit errors. This is in addition to on-die ECC, featured on all DDR5 DRAM components, which performs single-bit error detection and correction to mitigate system lockups and data corruption.
PowerEdge R250 server mounted in a server rack Harness the value of your data Support typical business applications without unnecessary costs with the high computing power provided by the entry-level, 1U high rack-mount server. Maximum performance and flexibility ready to handle the growing demands of the future. The PowerEdge R250 server with Intel Xeon E-2300 processors is an entry-level rack-mount server that provides the perfect balance of versatility and affordability. It has been designed with evolving computing requirements in mind. Supports up to 32 GB DIMMs with speeds up to 3200 MT/s, up to 128 GB of memory Significantly higher throughput with support for the PCIe 4.0 standard. Ideal for file/print servers, mail and messaging, point-of-sale, web hosting and collaboration platforms More efficient cooling Better security and faster boot-up with UEFI secure boot feature OpenManage Systems Management Dell EMC's OpenManage Systems Management offering helps simplify your IT environment with tools and solutions to discover, monitor, update, deploy and manage your PowerEdge infrastructure. Intelligent automation PowerEdge and OpenManage solutions integrate tools across the portfolio, making it easier for organisations to automate server lifecycle, optimise operations and scale effectively. Built-in security Dell EMC PowerEdge servers are based on a cyberattack-resistant architecture that provides security at every stage of the product lifecycle from trusted hardware components, security-verified components, signed internal software, detection of unauthorised or destructive changes and BIOS recovery.`
PowerEdge R250 Server Motherboard with Broadcom 5720 Dual Port 1Gb On-Board LOM V3, Ti Intel Xeon E-2314 2.8GHz, 8M Cache, 4C/4T, Turbo (65W), DDR4-3200 MT/s No Controller Chassis with up to x4, 3.5" Hot Plug Hard Drives, Software RAID w/Backplane, Ti 1x 16GB UDIMM, 3200MT/s, ECC 1x 480GB SSD SATA Read Intensive 6Gbps 512 2.5" Hot-plug AG Drive in 3.5" Hybrid Carrier Cabled Single Power Supply 700W MM HLAC (ONLY FOR 200-240V AC), Titanium iDRAC9, Basic (15GEN) PCIe Riser with Fan with 1 x16 and 1 x8 Slots Standard Fan On-Board LOM TPM 2.0 V3 3Yr Basic Next Business Day Warranty Accessories: Standard Bezel 1U/2U Static Rails for 2-Post and 4-Post Racks 1x European Power Cord 220V Factory Settings: Performance Optimized Power Saving BIOS Settings UEFI BIOS Boot Mode with GPT Partition
PowerEdge R260 Server Motherboard with Broadcom 5720 Dual Port 1Gb On-Board LOM Intel Xeon E-2414 2.6GHz, 12M Cache, 4C/4T, Turbo HT (55W), DDR5 PERC H355 Adapter, Low Profile Chassis with up to 6x2.5" SAS/SATA Hot Plug Hard Drives 1x 16GB UDIMM, 5600MT/s, ECC 1x 480GB SSD SATA Read Intensive 6Gbps 512 2.5in Hot-plug AG Drive PSU Hot Plug Single 700W MM HLAC (ONLY FOR 200-240Vac), Titanium iDRAC9, Basic (16GEN) Riser Config 1, Gen4 TPM 2.0 V3 3Yr Basic Next Business Day Warranty Accessories: 1U Standard Bezel 1U/2U Static Rails for 2-Post and 4-Post Racks 1x Power Cord C13 to C14, PDU Style, 10 AMP, 4m Factory Settings: Performance Optimized Power Saving BIOS Settings UEFI BIOS Boot Mode with GPT Partition
Controller Type Serial ATAConnection Type PCIPorts (internal)7-pin SATA 2Protocols Serial ATA/150Data Rate150 MB/s1.5 DTRController Chip Sil3512AMaximum Devices 2Channels 2RAID-Level 0, 1Compatible to Windows 2000, XP, Vista, 7
Tootja: DIGITUS Tootegrupp: Rack/frame 19"&10" Internal kõrgus: 6 U kõrgus: 368 mm laius: 600 mm sügavus: 450 mm Netokaal: 15 kg maksimaalne load maht: 60 kg Lisaandmed: metal doors, 2 pairs of adjustable racks, openable sides, possible locks in sides, Perforation on top ja down, Hole for an lisafan, Up ja down kaabel pass, Full back, Doors may be mounted on left või right side, ANSI/EIA RS-310-D, EC 297-2, DIN41949,IP20 värv: gray (RAL 7035) tehniline dokumentatsioon: http://katalog.assmann.pl/produkt
Original part number AK-1001-S Product name Lanberg fixed shelf 19'' 450mm, 1U/500x250mm, max load capacity up to 20kg gray Producer Lanberg Class of product Component for rack 19"&10" Component for rack 19 shelf Additional information Loading capacity: 20 Kg.Montage: Front four pointSuitable For 450/600mm 19" wall mount cabinetsRAL7035 Height 2.5 cm Width 29.5 cm Depth 51 cm Net weight 1.473 kg Colour Grey
Original part number FF01-6837-12B Product name Lanberg free-standing rack 19'' demounted flat pack 37U/600x800mm black Producer Lanberg Class of product Rack/frame 19"&10" Internal height 37 U Height 1833 mm Width 600 mm Depth 800 mm Net weight 86 kg Maximal load capacity 800 kg Additional information Cabinet type: FreestandingPackaging dimensions (W x D x H): Top & Bottom - 62x82x12 cmDoors - 63.5x82x13 cm, Frame - 61x174x25 cmFloor panel: 4 castors with brake + adjustable legsDegree of protection: IP20Top with fan tray: 4 fans 230V in top coverDoors type: Front - Temper glass, Rear - SteelStandard: ANSI/EIA RS-310D, IEC297-2, DIN41494; PART1 & PART7, ETSIMaterial: High grade cold rolled steel, powder coatedThickness: Mounting profile - 2,00mm, Others - 1,2mm - 1,5mmCable entry panel: Top, Bottom (adjustable)Included: Accessory bag, locks for front and rear doors and two side panels20 cage nuts M6RAL9004 Colour Black
Producer product name: 19" wall mounting cabinets 12U, steel door, 600 x 600 x 712 mm Colour of product: gray Warranty: 12 month(s) Gross weight: 25.30 kg Net weight: 22.00 kg
FS3600 is a 24-bay all-flash Synology NAS for enterprise use that boosts the performance of I/O sensitive applications, such as databases, virtual machines, or online transaction processing (OLTP).
TS-h886 QuTS hero desktop NAS with Intel Xeon D processor and four 2.5GbE ports designed for real-time SnapSync backup and virtual machine applications. Offering enterprise-grade performance at a SMB price point, the TS-h886 features an Intel Xeon D processor and DDR4 ECC (Error Correcting Code) memory (upgradable to 128GB) for extreme reliability. Powered by the ZFS-based QuTS hero operating system, the TS-h886 ensures data integrity and supports block-level inline data deduplication and compression, near-limitless snapshots, and real-time SnapSync applications. The TS-h886 helps businesses achieve reliable SLA rates in a variety of applications, including mission-critical file servers, virtualization servers, collaborative video editing platforms, and high-performance backup and recovery applications. 2.5GbE connectivity Four 2.5GbE ports accelerate file sharing between teams and devices, virtual machine applications or multimedia transmission. ECC memory DDR4 ECC memory detects and corrects memory errors down to the bit level, offering high reliability for mission-critical applications. 2 M.2 PCIe slots Two M.2 NVMe Gen 3 x4 SSD slots (up to 3.2GB/s each) enable SSD caching for improved read and write performance. Flexible PCIe expansion Two PCIe slots allow the use of 5GbE/10GbE/25GbE/40GbE cards, QM2 cards or simple graphics cards to increase application performance. Virtualization applications Scalable storage that supports virtual machines, containerized applications, centralized storage, backup, sharing and disaster recovery. ZFS file system The QuTS hero operating system combines the benefits of the ZFS file system with the QTS App Center ecosystem, giving businesses powerful capabilities.
