The Dynamic-N series wall-mount network cabinets are designed for simple and cost-effective network expansion. The roof, base, and rear panel of each enclosure are equipped with pre-cut cable entries. The roof enclosure also features a hole for a fan module. Inside, two pairs of galvanized 483 mm (19") profile rails are installed, marked with height units that can be read in both directions. Their depth is adjustable. Each enclosure has a sturdy steel structure made of sheet steel up to 1.2 mm thick. They are electrostatically powder-coated in the standard colors gray (RAL 7035) and black (RAL 9005). Removable side panels and a lockable and removable front door improve accessibility. The door hinges are replaceable. Wall mounting is done in two simple steps: the supplied mounting plate is screwed to the wall and then connected to the enclosure. To simplify logistics, the Dynamic-N series is delivered unassembled in a space-saving flat package. The wall-mounted enclosure can be quickly and easily installed using the included assembly instructions. Supplied unassembled Optimal ventilation and air extraction IP20 protection Lockable door with Safety glass with a steel frame Door opening angle 230° Single-point lock on the front door 483 mm (19") profile rails at the front and rear of the enclosure, galvanized 483 mm (19") profile rails are depth-adjustable and marked with a height unit Durable, high-load-bearing 1.0 - 1.2 mm powder-coated steel sheet Cable entry from the rear, roof, and base (pre-punched holes) Roof is fan-ready (pre-punched mounting holes) Ventilation holes for active and passive ventilation 4 grounding points (base, side panel, and front door) with protective cap Component installation depth (standard maximum): 219 - 320 mm
The Dynamic-N series wall-mount network cabinets are designed for simple and cost-effective network expansion. The roof, base, and rear panel of each enclosure are equipped with pre-cut cable entries. The roof enclosure also features a hole for a fan module. Inside, two pairs of galvanized 483 mm (19") profile rails are installed, marked with height units that can be read in both directions. Their depth is adjustable. Each enclosure has a sturdy steel structure made of sheet steel up to 1.2 mm thick. They are electrostatically powder-coated in the standard colors gray (RAL 7035) and black (RAL 9005). Removable side panels and a lockable and removable front door improve accessibility. The door hinges are replaceable. Wall mounting is done in two simple steps: the supplied mounting plate is screwed to the wall and then connected to the enclosure. To simplify logistics, the Dynamic-N series is delivered unassembled in a space-saving flat package. The wall-mounted enclosure can be quickly and easily installed using the included assembly instructions. Supplied unassembled Optimal ventilation and air extraction IP20 protection Lockable door with Safety glass with a steel frame Door opening angle 230° Single-point lock on the front door 483 mm (19") profile rails at the front and rear of the enclosure, galvanized 483 mm (19") profile rails are depth-adjustable and marked with a height unit Durable, high-load-bearing 1.0 - 1.2 mm powder-coated steel sheet Cable entry from the rear, roof, and base (pre-punched holes) Roof is fan-ready (pre-punched mounting holes) Ventilation holes for active and passive ventilation 4 grounding points (base, side panel, and front door) with protective cap Component installation depth (standard maximum): 219 - 320 mm
The Dynamic-N series wall-mount network cabinets are designed for simple and cost-effective network expansion. The roof, base, and rear panel of each enclosure are equipped with pre-cut cable entries. The roof enclosure also features a hole for a fan module. Inside, two pairs of galvanized 483 mm (19") profile rails are installed, marked with height units that can be read in both directions. Their depth is adjustable. Each enclosure has a sturdy steel structure made of sheet steel up to 1.2 mm thick. They are electrostatically powder-coated in the standard colors gray (RAL 7035) and black (RAL 9005). Removable side panels and a lockable and removable front door improve accessibility. The door hinges are replaceable. Wall mounting is done in two simple steps: the supplied mounting plate is screwed to the wall and then connected to the enclosure. To simplify logistics, the Dynamic-N series is delivered unassembled in a space-saving flat package. The wall-mounted enclosure can be quickly and easily installed using the included assembly instructions. Supplied unassembled Optimal ventilation and air extraction IP20 protection Lockable door with Safety glass with a steel frame Door opening angle 230° Single-point lock on the front door 483 mm (19") profile rails at the front and rear of the enclosure, galvanized 483 mm (19") profile rails are depth-adjustable and marked with a height unit Durable, high-load-bearing 1.0 - 1.2 mm powder-coated steel sheet Cable entry from the rear, roof, and base (pre-punched holes) Roof is fan-ready (pre-punched mounting holes) Ventilation holes for active and passive ventilation 4 grounding points (base, side panel, and front door) with protective cap Component installation depth (standard maximum): 219 - 320 mm
The Dynamic-N series wall-mount network cabinets are designed for simple and cost-effective network expansion. The roof, base, and rear panel of each enclosure are equipped with pre-cut cable entries. The roof enclosure also features a hole for a fan module. Inside, two pairs of galvanized 483 mm (19") profile rails are installed, marked with height units that can be read in both directions. Their depth is adjustable. Each enclosure has a sturdy steel structure made of sheet steel up to 1.2 mm thick. They are electrostatically powder-coated in the standard colors gray (RAL 7035) and black (RAL 9005). Removable side panels and a lockable and removable front door improve accessibility. The door hinges are replaceable. Wall mounting is done in two simple steps: the supplied mounting plate is screwed to the wall and then connected to the enclosure. To simplify logistics, the Dynamic-N series is delivered unassembled in a space-saving flat package. The wall-mounted enclosure can be quickly and easily installed using the included assembly instructions. Supplied unassembled Optimal ventilation and air extraction IP20 protection Lockable door with Safety glass with a steel frame Door opening angle 230° Single-point lock on the front door 483 mm (19") profile rails at the front and rear of the enclosure, galvanized 483 mm (19") profile rails are depth-adjustable and marked with a height unit Durable, high-load-bearing 1.0 - 1.2 mm powder-coated steel sheet Cable entry from the rear, roof, and base (pre-punched holes) Roof is fan-ready (pre-punched mounting holes) Ventilation holes for active and passive ventilation 4 grounding points (base, side panel, and front door) with protective cap Component installation depth (standard maximum): 369 - 470 mm
The Dynamic-N series wall-mount network cabinets are designed for simple and cost-effective network expansion. The roof, base, and rear panel of each enclosure are equipped with pre-cut cable entries. The roof enclosure also features a hole for a fan module. Inside, two pairs of galvanized 483 mm (19") profile rails are installed, marked with height units that can be read in both directions. Their depth is adjustable. Each enclosure has a sturdy steel structure made of sheet steel up to 1.2 mm thick. They are electrostatically powder-coated in the standard colors gray (RAL 7035) and black (RAL 9005). Removable side panels and a lockable and removable front door improve accessibility. The door hinges are replaceable. Wall mounting is done in two simple steps: the supplied mounting plate is screwed to the wall and then connected to the enclosure. To simplify logistics, the Dynamic-N series is delivered unassembled in a space-saving flat package. The wall-mounted enclosure can be quickly and easily installed using the included assembly instructions. Supplied unassembled Optimal ventilation and air extraction IP20 protection Lockable door with Safety glass with a steel frame Door opening angle 230° Single-point lock on the front door 483 mm (19") profile rails at the front and rear of the enclosure, galvanized 483 mm (19") profile rails are depth-adjustable and marked with a height unit Durable, high-load-bearing 1.0 - 1.2 mm powder-coated steel sheet Cable entry from the rear, roof, and base (pre-punched holes) Roof is fan-ready (pre-punched mounting holes) Ventilation holes for active and passive ventilation 4 grounding points (base, side panel, and front door) with protective cap Component installation depth (standard maximum): 369 - 470 mm
The DIGITUS patch panel bracket is an essential system accessory for anyone looking to create an organized and efficient networking environment. Its wall-mountable design not only saves valuable floor space but also promotes better airflow around your equipment, potentially extending its lifespan. Constructed from durable steel, this bracket is built to support your networking equipment securely. With the capacity to hold 2 rack units and compatibility with 19" rack systems, it offers a versatile solution for various setups. Whether you're setting up a new server room or optimizing an existing one, this patch panel bracket from DIGITUS is designed to meet your needs with reliability and ease.
Rack Cabinet for Convenient IT Infrastructure Organization - 10" Open Rack 4U 280x300, BlackLanberg presents a series of 10" Open Rack installation cabinets designed for convenient installation, easy access to devices, and efficient cable management. This practical solution is perfect for home network installations, small offices, service points, CCTV monitoring systems, alarm systems, and compact IT deployments where order, functionality, and space-saving features are key.This series features a well-thought-out, open design that provides easy access to installed devices and cables. This makes installation, servicing, and subsequent infrastructure expansion quick and convenient. The cabinet can be wall-mounted or placed on a countertop, allowing for easy adaptation to available space - whether in a technical room, a small office, or a home network installation.Fast and Flexible AssemblyThe cabinets are designed for self-assembly, allowing for quick assembly and immediate customization for a specific application. The ability to mount on a wall or place it on a tabletop provides great flexibility when planning your infrastructure and allows you to efficiently utilize even limited space.Equipment installation is facilitated by numbered 10" rack rails, which allow for precise arrangement of devices within the structure. This is especially useful when mounting network switches, patch panels, cable organizers, power strips, or other 10" components. Four vertical mounting rails ensure stable device mounting and help maintain the aesthetic layout of the entire installation.Open Design and Convenient Equipment AccessThe open design of the rack provides easy access to devices and cabling from multiple sides. This solution significantly streamlines daily infrastructure maintenance, cable connections, connection checks, and service work. The user has full control over the installed equipment without having to remove additional panels or doors.This is an ideal choice for installations that require frequent changes, expansions, or quick access to devices. The 10" Open Rack allows you to maintain order while providing the full functionality of a compact rack cabinet.Natural Device VentilationThe cabinet design features perforated panels that support the natural ventilation of installed equipment. Free airflow helps maintain proper operating conditions for network devices, which is crucial for their stability and reliability.Combined with the open design, the panel perforations provide practical support for the daily operation of switches, routers, patch panels, and other IT infrastructure components. This solution is particularly well-suited for simple and compact installations where efficient air circulation is essential without the need for extensive cooling systems. Easy Cable ManagementThe 10" Open Rack not only facilitates device installation but also neatly manages cables. Cable tie mounting points allow for convenient cable management, reducing cable clutter and improving the overall appearance of the installation.Well-managed cables enhance aesthetics, facilitate diagnostics, and provide faster access to individual connections during maintenance or network expansion. This makes the cabinet suitable for locations where order, ergonomics, and a professional appearance are important.Easy Carrying and Practical FeaturesThe 10" Open Rack series is equipped with integrated carrying handles that make it easy to move the cabinet during installation, relocation, or site preparation. This practical design feature increases the installer's comfort and simplifies positioning the cabinet in its final location. The side walls of the structure also allow for the attachment of additional network infrastructure components, such as an Access Point, router, or other auxiliary devices, providing greater configuration flexibility.The kit also includes basic mounting accessories, such as feet, M6 screws, and a carrying handle, providing the user with all the components necessary to begin installation.Sturdy construction for compact IT installationsThe cabinets are made of cold-rolled steel, ensuring durability, stability, and reliable support for the installed equipment. The maximum static load capacity is 60 kg, allowing the structure to accommodate various 10" IT infrastructure components.The series is available in 4U, 6U, and 9U variants, allowing you to choose the right model for your installation, available space, and surrounding aesthetics.
19-inch 27U floor-standing rack cabinet, 600x1000, glass door, (flat-pack), blackThe Lanberg FF01 series of rack cabinets is an excellent, well-thought-out solution for professional ICT environments where it is necessary to safely store and manage a large amount of server equipment. The design of the rack cabinet allows efficient use of space, and its solid workmanship ensures durability and long-lasting use. FF01 server racks are available in a variety of sizes and configurations, allowing for perfect customization. Thanks to high-quality materials and precise design solutions, the FF01 series guarantees optimal working conditions for server equipment and ease of access and management of ICT infrastructure. In addition, the aesthetic design and the ability to personalize add-ons and mounting components make Lanberg FF01 server cabinets an ideal choice for both large enterprises and smaller companies looking for a reliable and functional solution for their IT infrastructure.Easy installationThanks to the clever design and ease of installation of our FF01 series of standalone server racks, you save valuable time and effort by focusing on your key tasks. Regardless of your level of experience, you can quickly and efficiently organize your data center or server network.Not only do our racks come with clear paper installation instructions, but we also provide detailed video instructions available online. These step-by-step guide you through the entire process, ensuring that you fully understand each step.All of our FF01 standing server racks are equipped with grounding, providing additional protection for your equipment. This guarantees the safe use of your equipment, protecting it from potential damage caused by electrical discharges.Solid workmanshipFocusing on reliability and robustness, Lanberg FF01 series standing server racks are a guarantee of excellent quality. Designed with attention to every detail, our rack cabinets are distinguished by exceptional durability and precision workmanship, regardless of the application. The high-quality cold-rolled steel from which the components of our ICT racks are made ensures not only durability, but also precision and robustness of construction. Each of our server cabinets in the FF01 series is characterized by exceptional solidity of workmanship, which is the result of an advanced manufacturing process , providing excellent results both aesthetically and functionally.Flat PackOur Lanberg server racks are packaged in a "Flat Pack" format for self-assembly. Thanks to this, you can easily transport our racks in vehicles with limited cargo space, as well as have full control over the assembly process. Our years of experience in the market have given us a great understanding of how to protect components in cartons to minimize the risk of damage during transportation. We use high-quality protective materials and careful packaging to ensure that your server racks arrive in perfect condition - ready for assembly right away.Assembly support toolsOur accessories are carefully designed and tailored to fit various RACK cabinet models, ensuring excellent compatibility and functionality. With them, you can optimize the use of space in your rack and keep your cabling organized. Visit www.lanberg.eu to see the full range and choose the accessories that perfectly fit your RACK cabinet. All to create a professional and functional solution for storing and managing your network infrastructure.Efficient coolingThe FF01 series of standalone server racks from Lanberg is the ideal solution for those looking for performance even in the most demanding temperature conditions. Our rack cabinets combine optimal performance with functionality, aesthetics and security.Thanks to the ventilation hole at the top of the design, each of our cabinets provides excellent airflow, which translates into effective cooling. This element, combined with built-in fans, guarantees temperature control inside the cabinet, which is key to maintaining optimal operating conditions for your equipment. The design of our FF01 server cabinets has been thoughtfully considered to ensure the highest cooling efficiency. This translates into long-lasting and trouble-free operation of your equipment, regardless of its requirements.
Cable management accessory to help eliminate cable stress and maintain a neat, organized cable layout within an enclosure or a rack.Facilitates front cable managementIntegrated Front Cable HoopsOccupies 1U of rack space
Original part number FF01-6832-12B Product name Lanberg free-standing rack 19'' demounted flat pack 32U/600x800mm black Producer Lanberg Class of product Rack/frame 19"&10" Internal height 32 U Height 1610 mm Width 600 mm Depth 800 mm Net weight 83 kg Maximal load capacity 800 kg Additional information Cabinet type: FreestandingPackaging dimensions (W x D x H): Top & Bottom - 63x146x9.5 cmDoors - 63.5x82x12 cm, Frame - 60.5x152x25 cmFloor panel: 4 castors with brake + adjustable legsDegree of protection: IP20Top with fan tray: 4 fans 230V in top coverDoors type: Front - Temper glass, Rear - SteelStandard: ANSI/EIA RS-310D, IEC297-2, DIN41494; PART1 & PART7, ETSIMaterial: High grade cold rolled steel, powder coatedThickness: Mounting profile - 2,00mm, Others - 1,2mm - 1,5mmCable entry panel: Top, Bottom (adjustable)Included: Accessory bag, locks for front and rear doors and two side panels20 cage nuts M6RAL9004 Colour Black
Tootja: LogiLink Tootegrupp: Component for rack 19"&10" Component for rack 19: Power Distribution Unit Lisaandmed: 19 PDU 9x german sockets, without switch, Sockets kõrgus: 45 mm laius: 45 mm sügavus: 482 mm andmeleht: andmeleht
Tootja: Netrack Tootegrupp: Server case arvutikorpuse tüüp: 3U Rack internal 3,5"sahtleid: 3 external 5,25"sahtleid: 3 ventilaatorite arv: 2 tk kõrgus: 133.3 mm laius: 482 mm pikkus: 390 mm värv: must Lisaomadused: removable disk bay (disk can be easily removed),, front fan provides õhuvool through the disk drive space,, it is possible to use sliding rail kit for the ejection form chassis,, it is possible to build-in on the cabinet 19",, motherboard type
Dachlüftereinheit für DIGITUS Schränke, 2Lüft., Für Wandbefestigungs- und unmontierte Schränke Farbe schwarz RAL 9005, Geeignet für den vertikalen Einbau in die Rücktür eines DIGITUS 19" Serverschranks mit 26 Höheneinheiten ...
• Rack (1U) Intel C621A LGA 4189 • Number of processors supported: 2 • Maximum internal memory: 12 TB • Number of storage drives supported: 4 • Hot-swap HDD bays Number of 2.5" bays: 4 • USB 2.0 ports quantity: 1 • 1300 W
• Rack (2U) Intel C621A LGA 4189 • Number of processors supported: 2 • Number of DIMM slots: 32 • Maximum internal memory: 12 TB • Number of storage drives supported: 8 • Hot-swap HDD bays • USB 2.0 ports quantity: 1 • 2100 W
The QM2-2P2G2T adds support for M.2 SSDs and 2.5GbE connectivity to your QNAP NAS. Combining M.2 SSD and 2.5GbE connectivity into one solution, the QM2 PCIe expansion card improves overall NAS performance by enabling SSD caching while providing an affordable upgrade path for adopting 2.5GbE networks. As a PCIe card, the QM2-2P2G2T does not occupy any 3.5-inch drive bays, allowing you to upgrade your NAS without impacting your potential storage capacity.
Pack license allows you to install additional 8 cameras or devices / o so. IO in the Synology Surveillance Station. Synology Camera License Packs are designed to expand the configuration of the cameras in the Synology Surveillance Station. By default, you installed a license for one camera. Entering a license key on the Surveillance Station user interface, you can configure and manage more than one camera in the network.
Personal Cloud BeeStation Create your own cloud in minutes With a built-in hard drive and everything preconfigured, BeeStation is ready to replace your current cloud storage services right out of the box. Designed for people who want to store, sync, and share personal files and photos with minimal setup, BeeStation centralizes your data from phones, tablets, computers, external drives, and cloud services, allowing you to access them anywhere—without any subscription fees. Highlights • - Scan a QR code to begin—no storage or network expertise required - Store, access, and share files over the web, or from your desktop or mobile devices - Back up photos on your phone and let AI find who or what you're looking for - Edit files on BeeStation from your desktop while keeping your progress synced across computers - Back up files from Google Drive, OneDrive, Dropbox, and external drives to one central place - Share storage with family and friends so everyone has their own personalized storage space - 3-year warranty included
Multi-sector useRACK cabinets are used to store servers, network devices, UPS power generators or switches - the task of RACK cabinets is to protect the equipment and guarantee its stable functioning and maintaining order in the IT sphere.They are used not only in the IT industry but also in energy or industry, they are equipped with a ventilation system, the main element of which are perforated doors or ventilation panels. Organize a safe spaceYou don't have to worry about the stable functioning of the servers. The space is organized and tidy, and servers and data remain secure.Rack cabinets are also an integral part of each server room and guarantee the stable and effective operation of the data center. They have many different parameters and variants of execution, so you will certainly find a model that suits your needs.
• Connect up to 32 SAS/SATA devices • Balance protection and performance for critical applications with RAID 0, 1, 10 • Support critical, high-bandwidth applications with PCIe 4.0 connectivity • Advanced security through hardware secure boot
