• Extensive computing performance: Powered by Intel® Xeon® 6 Scalable processors, with 32 DDR5 RDIMM up to 6400MHz 1DPC, delivering exceptional performance and maximum efficiency across the widest range of workloads. • Modular architecture and scalable design: Built with DC-MHS architecture, supports up to 8 NVMe drives and offers up to 10 PCIe 5.0 slots, enabling higher bandwidth requirements. • GPU-accelerator optimization: Supports up to three dual-slot GPUs, like the NVIDIA H100 NVL, managing intensive graphical and computational tasks. • Optimized air cooling solution: Features hot-swap fan bar design for improved maintenance and optimized airflow, combined with a two-sided PSU placement to separate heat, ensuring efficient thermal management up to TDP 350W. • Tool-less, easy-maintenance design: Features tool-less access, including a top-cover handle and optimized fan bar for improved cable management and easy maintenance.
• Safety class rating IP20 • Lockable safety-glass door with steel frame • 210° door opening angle • 1-point-locking-mechanism on the front door • 483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanized • 483 mm (19“) profile rails are adjustable in depth and with height unit marking • 0.8 - 1.2 mm strong sheet steel with high load capacity, powder coated • Cable entry on the rear side, roof and base (pre-punched break-outs) • Roof is prepared for fan units (punched out entries) • Ventilation slots for active and passive ventilation and exhausting • 4 earthing points (base, side panel and front door) with protection cap • Equipment mounting depth min.-max.: 320 - 450 mm
• Safety class rating IP20 • Lockable safety-glass door with steel frame • 210° door opening angle • 1-point-locking-mechanism on the front door • 483 mm (19“) profile rails are adjustable in depth and with height unit marking • 483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanized • 0.8 - 1.2 mm strong sheet steel with high load capacity, powder coated • Roof is prepared for fan units (punched out entries) • Ventilation slots for active and passive ventilation and exhausting • 4 earthing points (base, side panel and front door) with protection cap • Equipment mounting depth min.-max.: 320 - 450 mm
The Dynamic-N series wall-mount network cabinets are designed for simple and cost-effective network expansion. The roof, base, and rear panel of each enclosure are equipped with pre-cut cable entries. The roof enclosure also features a hole for a fan module. Inside, two pairs of galvanized 483 mm (19") profile rails are installed, marked with height units that can be read in both directions. Their depth is adjustable. Each enclosure has a sturdy steel structure made of sheet steel up to 1.2 mm thick. They are electrostatically powder-coated in the standard colors gray (RAL 7035) and black (RAL 9005). Removable side panels and a lockable and removable front door improve accessibility. The door hinges are replaceable. Wall mounting is done in two simple steps: the supplied mounting plate is screwed to the wall and then connected to the enclosure. To simplify logistics, the Dynamic-N series is delivered unassembled in a space-saving flat package. The wall-mounted enclosure can be quickly and easily installed using the included assembly instructions. Supplied unassembled Optimal ventilation and air extraction IP20 protection Lockable door with Safety glass with a steel frame Door opening angle 230° Single-point lock on the front door 483 mm (19") profile rails at the front and rear of the enclosure, galvanized 483 mm (19") profile rails are depth-adjustable and marked with a height unit Durable, high-load-bearing 1.0 - 1.2 mm powder-coated steel sheet Cable entry from the rear, roof, and base (pre-punched holes) Roof is fan-ready (pre-punched mounting holes) Ventilation holes for active and passive ventilation 4 grounding points (base, side panel, and front door) with protective cap Component installation depth (standard maximum): 219 - 320 mm
• 7U cabinet, designed for optimal performance in every space • 600X600MM Mountable Network Cabinet • Ships preassembled for easy setup at your location • The cabinet comes with a tempered glass frontdoor to provide unmatched strength while maintaining clear visibility • Sidepanels are removable
• 7U cabinet, designed for optimal performance in every space • 600X450MM Mountable Network Cabinet • Ships preassembled for easy setup at your location • The cabinet comes with a tempered glass frontdoor to provide unmatched strength while maintaining clear visibility • Sidepanels are removable
Trough system to route power distribution cabling across the top of a NetShelter SX Enclosure.Protective grounding provisionsOverhead power distribution
Toolless, vertical cable management accessory that allows for quick installation and takes up zero U of space within the rack. It helps to eliminate cable stress and organize the cable layout within the rear channels of the NetShelter enclosure.Expanded Cable ManagementFacilitates rear/vertical cable managementOccupies 0U of rack spaceOrganizes data and power cablesTool-less mounting
Tootja: DIGITUS Tootegrupp: Rack/frame 19"&10" Internal kõrgus: 6 U kõrgus: 368 mm laius: 600 mm sügavus: 450 mm Netokaal: 15 kg maksimaalne load maht: 60 kg Lisaandmed: metal doors, 2 pairs of adjustable racks, openable sides, possible locks in sides, Perforation on top ja down, Hole for an lisafan, Up ja down kaabel pass, Full back, Doors may be mounted on left või right side, ANSI/EIA RS-310-D, EC 297-2, DIN41949,IP20 värv: gray (RAL 7035) tehniline dokumentatsioon: http://katalog.assmann.pl/produkt
Original part number AK-1402-B Product name Lanberg blanking panel 19'', 2U, black Producer Lanberg Class of product Component for rack 19"&10" Component for rack 19 Blank panel Additional information Blank panel 2URAL9004 Height 0.8 mm Width 9 mm Depth 48.5 mm Net weight 0.398 kg Colour Black
Tootja: DIGITUS Tootegrupp: Rack/frame 19"&10" Internal kõrgus: 12 U kõrgus: 635 mm laius: 600 mm sügavus: 600 mm Netokaal: 31.5 kg maksimaalne load maht: 60 kg Lisaandmed: 5mm tempepunane glass doors, 2 pairs of adjustable racks, Removable sides, Possibility of mounting side locks, Perforated up ja down, Doors may be mounted left/right, kaabel passess up an down, lisafans ppunaneticted, Full back, ANSI/EIA RS-310-D, EC 297-2, DIN41949,IP20 värv: gray (RAL 7035) tehniline dokumentatsioon: http://katalog.assmann.pl/produkt/szafa-krosowa-wiszaca-dz-19-12u-s600-g600-szary-ral-7035-dn-wd19-12u600
Tootja: Lanberg Tootegrupp: Rack/frame 19"&10" Internal kõrgus: 12 U kõrgus: 635 mm laius: 600 mm sügavus: 600 mm Netokaal: 27.87 kg maksimaalne load maht: 60 kg Lisaandmed: Cabinet type PART1 & PART7, ETSI, Material: High grade cold rolled steel, powder coated, Fan avaliable värv: must
Tootja: Lanberg Tootegrupp: Rack/frame 19"&10" Internal kõrgus: 37 U kõrgus: 1833 mm laius: 800 mm sügavus: 800 mm Netokaal: 98.5 kg maksimaalne load maht: 800 kg Lisaandmed: kaasastarvikud - Wheels koos brake, Ventilation panel (4 fan's),, Front lock, Rear lock, Side locks, M6 screws
Die Digitus Lüftereinheit für Unique Netztwerkschrank Serie ist für den Einbau in das Dachmodul geeignet, besitzt 4 Lüfter und einen Geräuschpegel von 47 dBm. Das Thermostat ist einstellbar von 0 bis +35°C. Das Zubehör ist die hohen Anforderungen der IT-Infrastruktur entwickelt und wird nach deutschem Qualitätsstandard hergestellt.
Externes SSD-Gehäuse, für M.2-PCIe-SSDs bis 2280, PCIe 3.0 x4 & NVMe 1.3, Anschluss per USB 3.2 (Gen 2x2) Typ C, mit 20 Gbit/s Datenübertragung, robustes Aluminiumgehäuse mit Heatspreader
