The Dynamic-N series wall-mount network cabinets are designed for simple and cost-effective network expansion. The roof, base, and rear panel of each enclosure are equipped with pre-cut cable entries. The roof enclosure also features a hole for a fan module. Inside, two pairs of galvanized 483 mm (19") profile rails are installed, marked with height units that can be read in both directions. Their depth is adjustable. Each enclosure has a sturdy steel structure made of sheet steel up to 1.2 mm thick. They are electrostatically powder-coated in the standard colors gray (RAL 7035) and black (RAL 9005). Removable side panels and a lockable and removable front door improve accessibility. The door hinges are replaceable. Wall mounting is done in two simple steps: the supplied mounting plate is screwed to the wall and then connected to the enclosure. To simplify logistics, the Dynamic-N series is delivered unassembled in a space-saving flat package. The wall-mounted enclosure can be quickly and easily installed using the included assembly instructions. Supplied unassembled Optimal ventilation and air extraction IP20 protection Lockable door with Safety glass with a steel frame Door opening angle 230° Single-point lock on the front door 483 mm (19") profile rails at the front and rear of the enclosure, galvanized 483 mm (19") profile rails are depth-adjustable and marked with a height unit Durable, high-load-bearing 1.0 - 1.2 mm powder-coated steel sheet Cable entry from the rear, roof, and base (pre-punched holes) Roof is fan-ready (pre-punched mounting holes) Ventilation holes for active and passive ventilation 4 grounding points (base, side panel, and front door) with protective cap Component installation depth (standard maximum): 369 - 470 mm
The Dynamic-N series wall-mount network cabinets are designed for simple and cost-effective network expansion. The roof, base, and rear panel of each enclosure are equipped with pre-cut cable entries. The roof enclosure also features a hole for a fan module. Inside, two pairs of galvanized 483 mm (19") profile rails are installed, marked with height units that can be read in both directions. Their depth is adjustable. Each enclosure has a sturdy steel structure made of sheet steel up to 1.2 mm thick. They are electrostatically powder-coated in the standard colors gray (RAL 7035) and black (RAL 9005). Removable side panels and a lockable and removable front door improve accessibility. The door hinges are replaceable. Wall mounting is done in two simple steps: the supplied mounting plate is screwed to the wall and then connected to the enclosure. To simplify logistics, the Dynamic-N series is delivered unassembled in a space-saving flat package. The wall-mounted enclosure can be quickly and easily installed using the included assembly instructions. Supplied unassembled Optimal ventilation and air extraction IP20 protection Lockable door with Safety glass with a steel frame Door opening angle 230° Single-point lock on the front door 483 mm (19") profile rails at the front and rear of the enclosure, galvanized 483 mm (19") profile rails are depth-adjustable and marked with a height unit Durable, high-load-bearing 1.0 - 1.2 mm powder-coated steel sheet Cable entry from the rear, roof, and base (pre-punched holes) Roof is fan-ready (pre-punched mounting holes) Ventilation holes for active and passive ventilation 4 grounding points (base, side panel, and front door) with protective cap Component installation depth (standard maximum): 219 - 320 mm
The Dynamic-N series wall-mount network cabinets are designed for simple and cost-effective network expansion. The roof, base, and rear panel of each enclosure are equipped with pre-cut cable entries. The roof enclosure also features a hole for a fan module. Inside, two pairs of galvanized 483 mm (19") profile rails are installed, marked with height units that can be read in both directions. Their depth is adjustable. Each enclosure has a sturdy steel structure made of sheet steel up to 1.2 mm thick. They are electrostatically powder-coated in the standard colors gray (RAL 7035) and black (RAL 9005). Removable side panels and a lockable and removable front door improve accessibility. The door hinges are replaceable. Wall mounting is done in two simple steps: the supplied mounting plate is screwed to the wall and then connected to the enclosure. To simplify logistics, the Dynamic-N series is delivered unassembled in a space-saving flat package. The wall-mounted enclosure can be quickly and easily installed using the included assembly instructions. Supplied unassembled Optimal ventilation and air extraction IP20 protection Lockable door with Safety glass with a steel frame Door opening angle 230° Single-point lock on the front door 483 mm (19") profile rails at the front and rear of the enclosure, galvanized 483 mm (19") profile rails are depth-adjustable and marked with a height unit Durable, high-load-bearing 1.0 - 1.2 mm powder-coated steel sheet Cable entry from the rear, roof, and base (pre-punched holes) Roof is fan-ready (pre-punched mounting holes) Ventilation holes for active and passive ventilation 4 grounding points (base, side panel, and front door) with protective cap Component installation depth (standard maximum): 219 - 320 mm
The Dynamic-N series wall-mount network cabinets are designed for simple and cost-effective network expansion. The roof, base, and rear panel of each enclosure are equipped with pre-cut cable entries. The roof enclosure also features a hole for a fan module. Inside, two pairs of galvanized 483 mm (19") profile rails are installed, marked with height units that can be read in both directions. Their depth is adjustable. Each enclosure has a sturdy steel structure made of sheet steel up to 1.2 mm thick. They are electrostatically powder-coated in the standard colors gray (RAL 7035) and black (RAL 9005). Removable side panels and a lockable and removable front door improve accessibility. The door hinges are replaceable. Wall mounting is done in two simple steps: the supplied mounting plate is screwed to the wall and then connected to the enclosure. To simplify logistics, the Dynamic-N series is delivered unassembled in a space-saving flat package. The wall-mounted enclosure can be quickly and easily installed using the included assembly instructions. Supplied unassembled Optimal ventilation and air extraction IP20 protection Lockable door with Safety glass with a steel frame Door opening angle 230° Single-point lock on the front door 483 mm (19") profile rails at the front and rear of the enclosure, galvanized 483 mm (19") profile rails are depth-adjustable and marked with a height unit Durable, high-load-bearing 1.0 - 1.2 mm powder-coated steel sheet Cable entry from the rear, roof, and base (pre-punched holes) Roof is fan-ready (pre-punched mounting holes) Ventilation holes for active and passive ventilation 4 grounding points (base, side panel, and front door) with protective cap Component installation depth (standard maximum): 369 - 470 mm
The Dynamic-N series wall-mount network cabinets are designed for simple and cost-effective network expansion. The roof, base, and rear panel of each enclosure are equipped with pre-cut cable entries. The roof enclosure also features a hole for a fan module. Inside, two pairs of galvanized 483 mm (19") profile rails are installed, marked with height units that can be read in both directions. Their depth is adjustable. Each enclosure has a sturdy steel structure made of sheet steel up to 1.2 mm thick. They are electrostatically powder-coated in the standard colors gray (RAL 7035) and black (RAL 9005). Removable side panels and a lockable and removable front door improve accessibility. The door hinges are replaceable. Wall mounting is done in two simple steps: the supplied mounting plate is screwed to the wall and then connected to the enclosure. To simplify logistics, the Dynamic-N series is delivered unassembled in a space-saving flat package. The wall-mounted enclosure can be quickly and easily installed using the included assembly instructions. Supplied unassembled Optimal ventilation and air extraction IP20 protection Lockable door with Safety glass with a steel frame Door opening angle 230° Single-point lock on the front door 483 mm (19") profile rails at the front and rear of the enclosure, galvanized 483 mm (19") profile rails are depth-adjustable and marked with a height unit Durable, high-load-bearing 1.0 - 1.2 mm powder-coated steel sheet Cable entry from the rear, roof, and base (pre-punched holes) Roof is fan-ready (pre-punched mounting holes) Ventilation holes for active and passive ventilation 4 grounding points (base, side panel, and front door) with protective cap Component installation depth (standard maximum): 219 - 320 mm
The Dynamic-N series wall-mount network cabinets are designed for simple and cost-effective network expansion. The roof, base, and rear panel of each enclosure are equipped with pre-cut cable entries. The roof enclosure also features a hole for a fan module. Inside, two pairs of galvanized 483 mm (19") profile rails are installed, marked with height units that can be read in both directions. Their depth is adjustable. Each enclosure has a sturdy steel structure made of sheet steel up to 1.2 mm thick. They are electrostatically powder-coated in the standard colors gray (RAL 7035) and black (RAL 9005). Removable side panels and a lockable and removable front door improve accessibility. The door hinges are replaceable. Wall mounting is done in two simple steps: the supplied mounting plate is screwed to the wall and then connected to the enclosure. To simplify logistics, the Dynamic-N series is delivered unassembled in a space-saving flat package. The wall-mounted enclosure can be quickly and easily installed using the included assembly instructions. Supplied unassembled Optimal ventilation and air extraction IP20 protection Lockable door with Safety glass with a steel frame Door opening angle 230° Single-point lock on the front door 483 mm (19") profile rails at the front and rear of the enclosure, galvanized 483 mm (19") profile rails are depth-adjustable and marked with a height unit Durable, high-load-bearing 1.0 - 1.2 mm powder-coated steel sheet Cable entry from the rear, roof, and base (pre-punched holes) Roof is fan-ready (pre-punched mounting holes) Ventilation holes for active and passive ventilation 4 grounding points (base, side panel, and front door) with protective cap Component installation depth (standard maximum): 369 - 470 mm
The Inter-tech 26" telescopic rail set for IPC enclosures is suitable for mounting 19" enclosures and has a maximum extension depth of 550 mm to 650 mm, depending on the rack mounting. Type of built-in rails Color silver EAN 4260133126510 Manufacturer no. 88887129 Server housing area Suitable for 19" cases - Not suitable for 1U cases except K-126L Properties Extension depth: 550 mm to 650 mm (depending on installation in the rack) | Installation height with installation angle: 49 mm | Load capacity max. 30 kg Contents 4 brackets for attaching the rails in the server cabinet (with screws) Material 1.1mm steel Note Not suitable for 1U cases except K-126L Dimensions Width: 45mm x Height: 13.5mm x Depth/Length: 650mm Weight 2.4kg
19-inch 27U floor-standing rack cabinet, 600x1000, mesh door, (flat-pack), blackThe Lanberg FF01 series of rack cabinets is an excellent, well-thought-out solution for professional ICT environments where it is necessary to safely store and manage a large amount of server equipment. The design of the rack cabinet allows efficient use of space, and its solid workmanship ensures durability and long-lasting use. FF01 server racks are available in a variety of sizes and configurations, allowing for perfect customization. Thanks to high-quality materials and precise design solutions, the FF01 series guarantees optimal working conditions for server equipment and ease of access and management of ICT infrastructure. In addition, the aesthetic design and the ability to personalize add-ons and mounting components make Lanberg FF01 server cabinets an ideal choice for both large enterprises and smaller companies looking for a reliable and functional solution for their IT infrastructure.Easy installationThanks to the clever design and ease of installation of our FF01 series of standalone server racks, you save valuable time and effort by focusing on your key tasks. Regardless of your level of experience, you can quickly and efficiently organize your data center or server network.Not only do our racks come with clear paper installation instructions, but we also provide detailed video instructions available online. These step-by-step guide you through the entire process, ensuring that you fully understand each step.All of our FF01 standing server racks are equipped with grounding, providing additional protection for your equipment. This guarantees the safe use of your equipment, protecting it from potential damage caused by electrical discharges.Solid workmanshipFocusing on reliability and robustness, Lanberg FF01 series standing server racks are a guarantee of excellent quality. Designed with attention to every detail, our rack cabinets are distinguished by exceptional durability and precision workmanship, regardless of the application. The high-quality cold-rolled steel from which the components of our ICT racks are made ensures not only durability, but also precision and robustness of construction. Each of our server cabinets in the FF01 series is characterized by exceptional solidity of workmanship, which is the result of an advanced manufacturing process , providing excellent results both aesthetically and functionally.Flat PackOur Lanberg server racks are packaged in a "Flat Pack" format for self-assembly. Thanks to this, you can easily transport our racks in vehicles with limited cargo space, as well as have full control over the assembly process. Our years of experience in the market have given us a great understanding of how to protect components in cartons to minimize the risk of damage during transportation. We use high-quality protective materials and careful packaging to ensure that your server racks arrive in perfect condition - ready for assembly right away.Assembly support toolsOur accessories are carefully designed and tailored to fit various RACK cabinet models, ensuring excellent compatibility and functionality. With them, you can optimize the use of space in your rack and keep your cabling organized. Visit www.lanberg.eu to see the full range and choose the accessories that perfectly fit your RACK cabinet. All to create a professional and functional solution for storing and managing your network infrastructure.Efficient coolingThe FF01 series of standalone server racks from Lanberg is the ideal solution for those looking for performance even in the most demanding temperature conditions. Our rack cabinets combine optimal performance with functionality, aesthetics and security.Thanks to the ventilation hole at the top of the design, each of our cabinets provides excellent airflow, which translates into effective cooling. This element, combined with built-in fans, guarantees temperature control inside the cabinet, which is key to maintaining optimal operating conditions for your equipment. The design of our FF01 server cabinets has been thoughtfully considered to ensure the highest cooling efficiency. This translates into long-lasting and trouble-free operation of your equipment, regardless of its requirements.
Tootja: DIGITUS Tootegrupp: Rack/frame 19"&10" Internal kõrgus: 12 U kõrgus: 635 mm laius: 600 mm sügavus: 600 mm Netokaal: 31 kg maksimaalne load maht: 60 kg Lisaandmed: 5mm tempepunane glass doors, 2 pairs of adjustable racks, Removable sides, Possibility of mounting side locks, Perforated up ja down, Doors may be mounted left/right, kaabel passess up an down, lisafans ppunaneticted, Full back, ANSI/EIA RS-310-D, EC 297-2, DIN41949,IP20 värv: gray (RAL 7035) tehniline dokumentatsioon: http://katalog.assmann.pl/produkt/szafa-krosowa-wiszaca-ndz-19-12u-s600-g600-szary-ral-7035-dn-w19-12u600
Original part number AK-1402-B Product name Lanberg blanking panel 19'', 2U, black Producer Lanberg Class of product Component for rack 19"&10" Component for rack 19 Blank panel Additional information Blank panel 2URAL9004 Height 0.8 mm Width 9 mm Depth 48.5 mm Net weight 0.398 kg Colour Black
Original part number FF01-8047-12B Product name Lanberg free-standing rack 19'' demounted flat pack 47U/800x1000mm black Producer Lanberg Class of product Rack/frame 19"&10" Internal height 47 U Height 0 mm Width 800 mm Depth 1000 mm Net weight 0 kg Maximal load capacity 800 kg Additional information Cabinet type: FreestandingPackaging dimensions (W x D x H):Top & Bottom-83x103x12 cm, Doors-83.5x212.5x9.5Frame - 80.5x218x25 cm, Vertical cable management - 19x212x11.5 cmFloor panel: 4 castors with brake + adjustable legsDegree of protection: IP20Top with fan tray: 4 fans 230V in top coverDoors type: Front - Temper glass, Rear - SteelStandard: ANSI/EIA RS-310D, IEC297-2, DIN41494; PART1 & PART7, ETSIMaterial: High grade cold rolled steel, powder coatedThickness: Mounting profile - 2,00mm, Others - 1,2mm - 1,5mmCable entry panel: Top, Bottom (adjustable)Included: Accessory bag, locks for front and rear doors and two side panels20 cage nuts M6RAL9004 Colour Black
Tootja: Gembird Tootegrupp: Patchpanel 19"&10" ports: 24 Type of ühenduspesa: 1 x RJ45 Category: 6 Wiring type: andmed puuduvad Lisaandmed: Termination kõrgus: 47 mm laius: 483 mm sügavus: 86 mm Netokaal: 0.8 kg värv: must
• Rack (2U) Intel C621A • Number of processors supported: 2 • Number of DIMM slots: 32 • Maximum internal memory: 12 TB • Number of storage drives supported: 12 • Hot-swap HDD bays Number of 2.5" bays: 12 • USB 2.0 ports quantity: 1 • UEFI • 2100 W
Width: 600 Dimensions: Height: 199 cm Depth: 100 cm Other features: Ventilation outlet on the cabinet ceiling Adjustable feet Front and rear doors Front door in toughened glass Door opening direction: right or left Cable entry dimensions adjustable Removable side panels
Width: 800 Accessories included: Locks Keys Dimensions: Height: 176.5 cm Depth: 80 cm Other features: Space for 4 fans on the cabinet ceiling Removable side panels Front and rear door Front door in toughened glass Door opening direction: right or left Adjustable cable entry dimensions Adjustable feet
