• Safety class rating IP20 • Lockable safety-glass door with steel frame • 210° door opening angle • 1-point-locking-mechanism on the front door • 483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanized • 483 mm (19“) profile rails are adjustable in depth and with height unit marking • 0.8 - 1.2 mm strong sheet steel with high load capacity, powder coated • Cable entry on the rear side, roof and base (pre-punched break-outs) • Roof is prepared for fan units (punched out entries) • Ventilation slots for active and passive ventilation and exhausting • 4 earthing points (base, side panel and front door) with protection cap • Equipment mounting depth min.-max.: 320 - 450 mm
• Safety class rating IP20 • Lockable safety-glass door with steel frame • 210° door opening angle • 1-point-locking-mechanism on the front door • 483 mm (19“) profile rails are adjustable in depth and with height unit marking • 483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanized • 0.8 - 1.2 mm strong sheet steel with high load capacity, powder coated • Roof is prepared for fan units (punched out entries) • Ventilation slots for active and passive ventilation and exhausting • 4 earthing points (base, side panel and front door) with protection cap • Equipment mounting depth min.-max.: 320 - 450 mm
The Dynamic-N series wall-mount network cabinets are designed for simple and cost-effective network expansion. The roof, base, and rear panel of each enclosure are equipped with pre-cut cable entries. The roof enclosure also features a hole for a fan module. Inside, two pairs of galvanized 483 mm (19") profile rails are installed, marked with height units that can be read in both directions. Their depth is adjustable. Each enclosure has a sturdy steel structure made of sheet steel up to 1.2 mm thick. They are electrostatically powder-coated in the standard colors gray (RAL 7035) and black (RAL 9005). Removable side panels and a lockable and removable front door improve accessibility. The door hinges are replaceable. Wall mounting is done in two simple steps: the supplied mounting plate is screwed to the wall and then connected to the enclosure. To simplify logistics, the Dynamic-N series is delivered unassembled in a space-saving flat package. The wall-mounted enclosure can be quickly and easily installed using the included assembly instructions. Supplied unassembled Optimal ventilation and air extraction IP20 protection Lockable door with Safety glass with a steel frame Door opening angle 230° Single-point lock on the front door 483 mm (19") profile rails at the front and rear of the enclosure, galvanized 483 mm (19") profile rails are depth-adjustable and marked with a height unit Durable, high-load-bearing 1.0 - 1.2 mm powder-coated steel sheet Cable entry from the rear, roof, and base (pre-punched holes) Roof is fan-ready (pre-punched mounting holes) Ventilation holes for active and passive ventilation 4 grounding points (base, side panel, and front door) with protective cap Component installation depth (standard maximum): 219 - 320 mm
• 7U cabinet, designed for optimal performance in every space • 600X600MM Mountable Network Cabinet • Ships preassembled for easy setup at your location • The cabinet comes with a tempered glass frontdoor to provide unmatched strength while maintaining clear visibility • Sidepanels are removable
• 7U cabinet, designed for optimal performance in every space • 600X450MM Mountable Network Cabinet • Ships preassembled for easy setup at your location • The cabinet comes with a tempered glass frontdoor to provide unmatched strength while maintaining clear visibility • Sidepanels are removable
The Digitus pull-out shelf 1000mm 1U is a shelf for network and server cabinets. It is used to store system parts that cannot be installed in 19". It is attached to the four angle profiles. It is supplied complete with fastening material. The loading capacity is 65 kg. The shelf can be used in pre-assembled and unassembled Digitus 19" network cabinets as well as Digitus 19" universal racks. Shelf type EAN 4016032135494 Manufacturer no. DN-19 TRAY-2-1000 IT cabinet area Intended use for storing system parts that cannot be installed in 19". Suitable for network and server cabinets Features extendable, with handle Load capacity up to 65 kg Installation of profile fastening Material perforated perforated sheet metal Accessories available Dimensions Width: 48.3 cm x Height: 50 cm x Depth/Length: 72 cm Weight 8kg
ROBUST CONSTRUCTION FOR HEAVY UPS UNITSR/0019/6-10KVA Mounting Rail KitThis kit is designed for the stable mounting of high-performance UPS units and battery pack (BP) modules in a 19" rack cabinet. Professional-grade uninterruptible power supply devices are heavy; therefore, this accessory must be capable of supporting equipment weighing over 40 kg. These metal rails have a maximum load capacity of 80 kg.Product compatible with Rack UPS models: R/6000I/PF1/DF | R/10000I/PF1/DFRECOMMENDED INSTALLATION METHOD FOR RACK-SERIES UPS AND BATTERY PACK MODULES IN 19" SERVER CABINETSARMAC offers users full flexibility regarding the installation method for power backup equipment in a 19" rack cabinet. Installation can be performed using only the mounting ears (included with every Rack-series UPS/BP) or by additionally purchasing this mounting rail kit.Why is this recommended?Mounting ears support the weight of the power backup equipment only at the front. The weight of such devices--especially high-power models containing multiple high-performance batteries--can cause the UPS or BP modules to become unstable. This instability, combined with moving the 19" rack cabinet itself, could lead to the heavy equipment coming loose, potentially damaging the UPS, BP modules, other equipment, or the rack cabinet itself.The R/0019/6-10KVA product effectively eliminates this risk. Once the backup power equipment is slid onto the mounting rails and locked in place, it is supported evenly and stably along its entire length--not just at the front!Prevent equipment from becoming loose inside the 19" rack cabinet and ensure the safety of the unit responsible for keeping your systems running during power outages.EASY INSTALLATION IN 19" RACK CABINETSThe R/0019/6-10KVA mounting rail kit also simplifies the installation of heavy backup power units within 19" server cabinets. The mounting accessory itself is installed before inserting the UPS or battery pack module. Once the rails are secured using M6 mounting screws and cage nuts, you can proceed to install the backup power units by lifting them to the correct height and sliding them onto the rails. After sliding the equipment into the cabinet, lock the device in place by inserting cage nuts into the rack's vertical mounting rails and screwing the (pre-attached) mounting brackets to the rack.This product not only offers a much higher level of security for your rack-mounted equipment but also facilitates the installation of heavy UPS units or battery packs. USEFUL MOUNTING ACCESSORIES INCLUDEDIn addition to a pair of mounting rails for 19-inch rack cabinets, the package contains a supply of useful installation accessories--M6 screws and cage nuts. Both items are made of a metal alloy that ensures their durability; there is no risk of bent components that would hinder rail installation inside the server cabinet rather than facilitating it.
Rack Cabinet for Convenient IT Infrastructure Organization - 10" Open Rack 4U 280x300, BlackLanberg presents a series of 10" Open Rack installation cabinets designed for convenient installation, easy access to devices, and efficient cable management. This practical solution is perfect for home network installations, small offices, service points, CCTV monitoring systems, alarm systems, and compact IT deployments where order, functionality, and space-saving features are key.This series features a well-thought-out, open design that provides easy access to installed devices and cables. This makes installation, servicing, and subsequent infrastructure expansion quick and convenient. The cabinet can be wall-mounted or placed on a countertop, allowing for easy adaptation to available space - whether in a technical room, a small office, or a home network installation.Fast and Flexible AssemblyThe cabinets are designed for self-assembly, allowing for quick assembly and immediate customization for a specific application. The ability to mount on a wall or place it on a tabletop provides great flexibility when planning your infrastructure and allows you to efficiently utilize even limited space.Equipment installation is facilitated by numbered 10" rack rails, which allow for precise arrangement of devices within the structure. This is especially useful when mounting network switches, patch panels, cable organizers, power strips, or other 10" components. Four vertical mounting rails ensure stable device mounting and help maintain the aesthetic layout of the entire installation.Open Design and Convenient Equipment AccessThe open design of the rack provides easy access to devices and cabling from multiple sides. This solution significantly streamlines daily infrastructure maintenance, cable connections, connection checks, and service work. The user has full control over the installed equipment without having to remove additional panels or doors.This is an ideal choice for installations that require frequent changes, expansions, or quick access to devices. The 10" Open Rack allows you to maintain order while providing the full functionality of a compact rack cabinet.Natural Device VentilationThe cabinet design features perforated panels that support the natural ventilation of installed equipment. Free airflow helps maintain proper operating conditions for network devices, which is crucial for their stability and reliability.Combined with the open design, the panel perforations provide practical support for the daily operation of switches, routers, patch panels, and other IT infrastructure components. This solution is particularly well-suited for simple and compact installations where efficient air circulation is essential without the need for extensive cooling systems. Easy Cable ManagementThe 10" Open Rack not only facilitates device installation but also neatly manages cables. Cable tie mounting points allow for convenient cable management, reducing cable clutter and improving the overall appearance of the installation.Well-managed cables enhance aesthetics, facilitate diagnostics, and provide faster access to individual connections during maintenance or network expansion. This makes the cabinet suitable for locations where order, ergonomics, and a professional appearance are important.Easy Carrying and Practical FeaturesThe 10" Open Rack series is equipped with integrated carrying handles that make it easy to move the cabinet during installation, relocation, or site preparation. This practical design feature increases the installer's comfort and simplifies positioning the cabinet in its final location. The side walls of the structure also allow for the attachment of additional network infrastructure components, such as an Access Point, router, or other auxiliary devices, providing greater configuration flexibility.The kit also includes basic mounting accessories, such as feet, M6 screws, and a carrying handle, providing the user with all the components necessary to begin installation.Sturdy construction for compact IT installationsThe cabinets are made of cold-rolled steel, ensuring durability, stability, and reliable support for the installed equipment. The maximum static load capacity is 60 kg, allowing the structure to accommodate various 10" IT infrastructure components.The series is available in 4U, 6U, and 9U variants, allowing you to choose the right model for your installation, available space, and surrounding aesthetics.
Trough system to route power distribution cabling across the top of a NetShelter SX Enclosure.Protective grounding provisionsOverhead power distribution
Toolless, vertical cable management accessory that allows for quick installation and takes up zero U of space within the rack. It helps to eliminate cable stress and organize the cable layout within the rear channels of the NetShelter enclosure.Expanded Cable ManagementFacilitates rear/vertical cable managementOccupies 0U of rack spaceOrganizes data and power cablesTool-less mounting
Tootja: DIGITUS Tootegrupp: Rack/frame 19"&10" Internal kõrgus: 6 U kõrgus: 368 mm laius: 600 mm sügavus: 450 mm Netokaal: 15 kg maksimaalne load maht: 60 kg Lisaandmed: metal doors, 2 pairs of adjustable racks, openable sides, possible locks in sides, Perforation on top ja down, Hole for an lisafan, Up ja down kaabel pass, Full back, Doors may be mounted on left või right side, ANSI/EIA RS-310-D, EC 297-2, DIN41949,IP20 värv: gray (RAL 7035) tehniline dokumentatsioon: http://katalog.assmann.pl/produkt
Original part number AK-1001-S Product name Lanberg fixed shelf 19'' 450mm, 1U/500x250mm, max load capacity up to 20kg gray Producer Lanberg Class of product Component for rack 19"&10" Component for rack 19 shelf Additional information Loading capacity: 20 Kg.Montage: Front four pointSuitable For 450/600mm 19" wall mount cabinetsRAL7035 Height 2.5 cm Width 29.5 cm Depth 51 cm Net weight 1.473 kg Colour Grey
Original part number WF01-6422-10S Product name Lanberg wall-mounted rack 19'' demounted flat pack 22U/600x450mm gray Producer Lanberg Class of product Rack/frame 19"&10" Internal height 22 U Height 1082 mm Width 600 mm Depth 450 mm Net weight 31 kg Maximal load capacity 60 kg Additional information Cabinet type: Wall mountPackaging dimensions (W x D x H): 62x120x19 cmDegree of protection: IP20Doors type: Temper glassStandard: ANSI/EIA RS-310-D, IEC297-2, DIN41494; PART1 & PART7, ETSIMaterial: High grade cold rolled steel, powder coatedFan avaliable: Yes, 120mm, 110V or 220VThickness: Mounting profile - 1,50mm, Others - 1,2mmCable entry panel: Top, BottomIncluded: Accessory bag, earth kit, front door lock, two side panels with locks,10 cage nuts M6.RAL7035 Colour Grey
Tootja: DIGITUS Tootegrupp: Rack/frame 19"&10" Internal kõrgus: 12 U kõrgus: 635 mm laius: 600 mm sügavus: 600 mm Netokaal: 31.5 kg maksimaalne load maht: 60 kg Lisaandmed: 5mm tempepunane glass doors, 2 pairs of adjustable racks, Removable sides, Possibility of mounting side locks, Perforated up ja down, Doors may be mounted left/right, kaabel passess up an down, lisafans ppunaneticted, Full back, ANSI/EIA RS-310-D, EC 297-2, DIN41949,IP20 värv: gray (RAL 7035) tehniline dokumentatsioon: http://katalog.assmann.pl/produkt/szafa-krosowa-wiszaca-dz-19-12u-s600-g600-szary-ral-7035-dn-wd19-12u600
Tootja: Lanberg Tootegrupp: Patchpanel 19"&10" ports: 24 Type of ühenduspesa: 24 x RJ-45 Category: 5e Wiring type: CAT5E, UTP - unschielded twisted pair kaabel, 4 pairs Lisaandmed: Attached kaabel management panel, universaalne IDC/LSA Ühendusi in accordance koos T568A/B, Identify ports in the form of numbered fields kõrgus: 0 mm laius: 0 mm sügavus: 0 mm Netokaal: 0 kg värv: hall
Tootja: Lanberg Tootegrupp: Rack/frame 19"&10" Internal kõrgus: 37 U kõrgus: 1833 mm laius: 800 mm sügavus: 800 mm Netokaal: 98.5 kg maksimaalne load maht: 800 kg Lisaandmed: kaasastarvikud - Wheels koos brake, Ventilation panel (4 fan's),, Front lock, Rear lock, Side locks, M6 screws
Die Digitus Lüftereinheit für Unique Netztwerkschrank Serie ist für den Einbau in das Dachmodul geeignet, besitzt 4 Lüfter und einen Geräuschpegel von 47 dBm. Das Thermostat ist einstellbar von 0 bis +35°C. Das Zubehör ist die hohen Anforderungen der IT-Infrastruktur entwickelt und wird nach deutschem Qualitätsstandard hergestellt.
Externes SSD-Gehäuse, für M.2-PCIe-SSDs bis 2280, PCIe 3.0 x4 & NVMe 1.3, Anschluss per USB 3.2 (Gen 2x2) Typ C, mit 20 Gbit/s Datenübertragung, robustes Aluminiumgehäuse mit Heatspreader
Width: 600 Accessories included: Locks Keys Dimensions: Height: 91 cm Depth: 45 cm Other features: Space for 2 fans on the cabinet ceiling Wall or floor standing mounting Removable side panels Front door in toughened glass Door opening direction: right or left Front door rotation angle: more than 180 degrees
Width: 800 Accessories included: Locks Keys Dimensions: Height: 199 cm Depth: 80 cm Other features: Ventilation outlet on the cabinet ceiling Removable side panels Front and rear doors Front door in toughened glass Door opening direction: right or left Adjustable cable entry dimensions Adjustable feet
Dual M.2 22110/2280 PCIe NVMe SSD expansion card Connector: 2 x M.2 22110 or 2280 PCIe (Gen2 x 4) NVMe SSD slots PCIe and Lanes: PCIe Gen2 x 4 Bracket: Low-profile (default). Low-profile flat and Full-height brackets are also included. Dimensions (L x W x H): 147.15 x 68.9 x 20.6 mm; 5.79 x 2.71 x 0.81 inch
