• Steel sheet housing, self-ventilated, screwed, pre-assembled • Front door lockable, with latch, door opening angle 120° • Front door fully made of certified safety glass (4 mm) • Door stop left-sided • Roof and bottom with cable entry 145 x 70 mm • Inside 2 x 10“ profile rails, depth adjustable in 60 mm raster • Max. mounting depth 230 mm (at delivery: ca. 170 mm) • Paint finish RAL7035, light grey / RAL9005, jet black / RAL9010, pure white • Width 312 mm, height 300 mm • Max. load 30 kg, protection degree IP20 • Delivery incl. 1 x brush, 1 x plastic cover, key
• Steel sheet housing, self-ventilated, screwed, pre-assembled • Front door lockable, with latch, door opening angle 120° • Front door fully made of certified safety glass (4 mm) • Door stop left-sided • Roof and bottom with cable entry 145 x 70 mm • Inside 2 x 10“ profile rails, depth adjustable in 60 mm raster • Max. mounting depth 230 mm (at delivery: ca. 170 mm) • Paint finish RAL7035, light grey / RAL9005, jet black / RAL9010, pure white • Width 312 mm, height 300 mm • Max. load 30 kg, protection degree IP20 • Delivery incl. 1 x brush, 1 x plastic cover, key
• Steel sheet housing, self-ventilated, screwed, pre-assembled • Front door lockable, with latch, door opening angle 120° • Front door fully made of certified safety glass (4 mm) • Door stop left-sided • Roof and bottom with cable entry 145 x 70 mm • Inside 2 x 10“ profile rails, depth adjustable in 60 mm raster • Max. mounting depth 230 mm (at delivery: ca. 170 mm) • Paint finish RAL7035, light grey / RAL9005, jet black / RAL9010, pure white • Width 312 mm, height 300 mm • Max. load 30 kg, protection degree IP20 • Delivery incl. 1 x brush, 1 x plastic cover, key
• Steel sheet housing, self-ventilated, screwed, pre-assembled • Front door lockable, with latch, door opening angle 120° • Front door fully made of certified safety glass (4 mm) • Door stop left-sided • Roof and bottom with cable entry 145 x 70 mm • Inside 2 x 10“ profile rails, depth adjustable in 60 mm raster • Max. mounting depth 230 mm (at delivery: ca. 170 mm) • Paint finish RAL7035, light grey / RAL9005, jet black / RAL9010, pure white • Width 312 mm, height 300 mm • Max. load 30 kg, protection degree IP20 • Delivery incl. 1 x brush, 1 x plastic cover, key
• Steel sheet housing, self-ventilated, screwed, pre-assembled • Front door lockable, with latch, door opening angle 120° • Front door fully made of certified safety glass (4 mm) • Door stop left-sided • Roof and bottom with cable entry 145 x 70 mm • Inside 2 x 10“ profile rails, depth adjustable in 60 mm raster • Max. mounting depth 230 mm (at delivery: ca. 170 mm) • Paint finish RAL7035, light grey / RAL9005, jet black / RAL9010, pure white • Width 312 mm, height 300 mm • Max. load 30 kg, protection degree IP20 • Delivery incl. 1 x brush, 1 x plastic cover, key
• Steel sheet housing, self-ventilated, screwed, pre-assembled • Front door lockable, with latch, door opening angle 120° • Front door fully made of certified safety glass (4 mm) • Door stop left-sided • Roof and bottom with cable entry 145 x 70 mm • Inside 2 x 10“ profile rails, depth adjustable in 60 mm raster • Max. mounting depth 230 mm (at delivery: ca. 170 mm) • Paint finish RAL7035, light grey / RAL9005, jet black / RAL9010, pure white • Width 312 mm, height 300 mm • Max. load 30 kg, protection degree IP20 • Delivery incl. 1 x brush, 1 x plastic cover, key
• Steel sheet housing, self-ventilated, screwed, pre-assembled • Front door lockable, with latch, door opening angle 120° • Front door fully made of certified safety glass (4 mm) • Door stop left-sided • Roof and bottom with cable entry 145 x 70 mm • Inside 2 x 10“ profile rails, depth adjustable in 60 mm raster • Max. mounting depth 230 mm (at delivery: ca. 170 mm) • Paint finish RAL7035, light grey / RAL9005, jet black / RAL9010, pure white • Width 312 mm, height 300 mm • Max. load 30 kg, protection degree IP20 • Delivery incl. 1 x brush, 1 x plastic cover, key
• Steel sheet housing with welded frame, pre-assembled, self-ventilated • Rear sided swing-frame for swiveling the front part of the housing • Prepared for Plug & Play 2-fan unit (Art.-No. 691656GR) • Bottom with 4 x mounting point for leveling feet or castor set (please order separately) • Front door with metal hinges for increased stability • Roof, bottom and rear wall with pre-punched openings for cable entry (250 x 70 mm) • Prepared for mounting of single fan units in roof and bottom • Inside front-sided 2 x 19“ profile rails, galvanised, depth-adjustable • Front door with window made of certified safety glass • Front door lockable with latch • Internal earthing of all cabinet sections
• 19“ Network cabinet according to DIN41494 • Steel sheet housing with screwed frame, completely pre-assembled, self-ventilated, dismountable • Inside front and rear 4 x 19“ profiles (2 front, 2 rear-sided), galvanised, depth-adjustable in steps of 20 mm • Uprising numbering of rack units at the 19“ profiles • Front door 1-part, with window of certified safety glass (thickness 5 mm) • Front door with 1-point turning handle, lockable • Rear door 1-part, steel sheet, with 1 x latch locking (lock equal to front door) • Door stop for font and rear door possible left- or right-sided, door opening angle > 180° • Detachable side walls with 2 x quick release and 1 x latch locking (lock equal to door lock) • Cabinets stackable side-by-side with and without removal of side walls, baying set Art.-No. PEL-ANR01 • Roof and bottom with 2 pre-punched openings for cable entry (386 x 69 mm) • Roof and bottom prepared for accommodation of 4-fan unit Art.-No. PEL-LFD04ET.GR • Cable entries and fan openings covered with screwed covers • Internal earthing of all cabinet sections • Max. load 800 kg for static equally distributed load • Protection degree IP20 • Paint finish RAL7035, light grey • Included accessories: 4 x leveling feet, set of captive nuts (PU 40 pcs. for 42U, 20 pcs. for 24U), keys
• Protection class IP20 • Front and rear door made of 70% perforated steel • Swivel handle with profile half-cylinder lock incl. type 333 key on the front and rear door • 1-point locking on all doors • Removable side panels with type 333 sash lock and additional snap lock • Incl. 4 levelling feet M10, enclosed • 483 mm (19") profile rails mounted at the front and rear inside the enclosure, infinitely adjustable • 483 mm (19") profile rails are galvanized and numbered in opposite directions to the height units • 483 mm (19") profile rails are connected to depth struts for increased stability • High load capacity of the 483 mm (19") profile rails of up to 1200 kg • Installation depth for components min.-max.: 400-1135 mm • Vertical cable ducts with cable routing aids and cover installed in the front panel • Modular, openable base chassis with removable 19" blind panels (450 x 803 mm) • Cable inlets in the base: 400 x 170 mm (rear), 90 x 950 mm (side) • Cable inlets in the roof: 90 x 950 mm (lateral) • Integrated PDU holders in the rear cabinet area on the left and right • Roof is prepared to accommodate a fan unit and an attached, removable cover • Earthing points in the cabinet and on removable doors/walls • Ready for immediate use: Delivery is assembled (cabinet can be completely dismantled if required)
Cable management accessory to help eliminate cable stress and maintain a neat, organized cable layout within an enclosure or a rack.Vertical mounting rails are adjustable for equipment with various mounting depthsFacilitates side cable managementTool-less mounting
Tootja: DIGITUS Tootegrupp: Rack/frame 19"&10" Internal kõrgus: 15 U kõrgus: 769 mm laius: 600 mm sügavus: 600 mm Netokaal: 34.5 kg maksimaalne load maht: 60 kg Lisaandmed: 5mm tempepunane glass doors, 2 pairs of adjustable racks, Removable sides, Possibility of mounting side locks, Up ja bottom perforation, Possibility of mounting of an lisafan, Up ja down kaabel pass, Full back, Divided cabinet, ANSI/EIA RS-310-D, EC 297-2, DIN41949,IP20 värv: gray (RAL 7035) tehniline dokumentatsioon: http://katalog.assmann.pl/produkt/szafa-krosowa-wiszaca-dz-19-15u-s600-g600-szary-ral-7035-dn-wd19-15u600
Original part number 119-001-010-004 Product name Netrack cable organizer, 19''/1U, black with cover Producer Netrack Class of product Component for rack 19"&10" Component for rack 19 Cable management Additional information Panel for having cables in order in cabinet,for vertical mounting (ASA) 19"4 pcs of screws are required for assembly; Height 1 U45 mm Width 485 mm Depth 69 mm Colour Black
Original part number NP5115 Product name Netrack sliding rail for server case RACK 19'', 25-55 cm depth Producer Netrack Class of product Server case Type of computer case 4U Rack Height 49 mm Length 457 mm914 mm Colour Silver Additional features slide rails allows 19" rackmount chassis to slide in and out of a rack cabinetrail set include: 2 x rail, 4 x L-type bracket, screwsfits to lot types of server cases, shelves ect.
Tootja: Netrack Tootegrupp: Patchpanel 19"&10" ports: 24 Type of ühenduspesa: RJ45 Category: 5e Wiring type: UTP - unschielded twisted pair kaabel, 4 pairs Lisaandmed: for vertikaalne mounting (ASA) 19”, 4 gruppi of 6 RJ45 jacks on the panel, UTP RJ-45 jack from front side, Krone ühenduspesa from rear side, ühenduspesa are described form rear side by port number ja värv coding, for wiring please use the Krone-tool, 4 tk of screws are required for assembly, shelf for kaabel management from rear side of patch panel, hooks to attach the kaabel bundle, front panel is equipped koos port identification field – push-in transparent pla, channel identification strips – 4 tk of 6 field kõrgus: 1 U, 44 mm laius: 19 tolli, 480 mm sügavus: 82 mm Netokaal: 0.63 kg värv: must
• For installation into 483 mm (19") unit • 4 fans • incl. thermostat, adjustable from 0 °C up to +70 °C • On/off switch • Air flow: 9.2 m³/min. • 1.8 m cable with CEE 7/7 (Type-F) plug • 1.8 m cable with CEE 7/7 (Type F) plug
• for installation on the 483 mm (19“) profile rails • lockable and equipable with handle • cable pass through possible on the rear side • sturdy steel sheet • depth when completely extracted: 660 mm • max. height inside: 31 mm • Mounting depth min.-max.: 400-630 mm
Width: 800 Accessories included: Locks Keys Dimensions: Height: 199 cm Depth: 80 cm Other features: Ventilation outlet on the cabinet ceiling Removable side panels Front and rear doors Front door in toughened glass Door opening direction: right or left Adjustable cable entry dimensions Adjustable feet
• Protection class IP20 • Front door made of complete steel frame with certified safety glass, one-piece • Swivel handle with profile half-cylinder lock incl. type 333 key on the front door • Steel rear door with round lock incl. key type 333, two-part • 1-point locking on the front door, 1-point locking on the rear door (incl. locking aid at the top and bottom) • Removable side panels with type 333 sash lock and additional snap lock • Incl. 4 levelling feet M10, enclosed • 483 mm (19") profile rails mounted at the front and rear inside the enclosure, infinitely adjustable • 483 mm (19") profile rails are galvanized and numbered in opposite directions to the height units • 483 mm (19") profile rails are connected to depth struts for increased stability • High load capacity of the 483 mm (19") profile rails of up to 1200 kg • Installation depth for components min.-max.: 688-943 mm • Vertical cable ducts with cable routing aids and cover installed in the front panel • Modular, openable base chassis with removable 19" blind panels (450 x 670 mm) • Cable inlets in the base: 400 x 170 mm (rear), 90 x 750 mm (side) • Cable inlets in the roof: 90 x 750 mm (lateral) • Roof is prepared to accommodate a fan unit and an attached, removable cover • Earthing points in the cabinet and on removable doors/walls • Ready for immediate use: Delivery is assembled (cabinet can be completely dismantled if required)
Standing cabinet Rack 19" 42U 800x800mm blackOne-section standing cabinet Lanberg FF01-8842-12B is a solution designed for network construction, cabling assembly and equipment in size 19 with a maximum combined load capacity of up to 800 kg. It can be used in data centers that require a large amount of space in the device cabinets.The wardrobe will successfully fulfill its role in large, extensive networks and server rooms, both in small, medium and large companies as well as corporations. It also works well in low voltage installations such as cable television networks, alarm and fire alarm systems, access control systems as well as CCTV and IP monitoring systems. The construction is made using high quality rolled steel, characterized by excellent design and quality.The cabinet allows full adjustment of the depth of vertical mounting rails. It is equipped with a front door made of tempered glass with a lock, with the possibility of fitting the right or left side. It has removable side panels (with locks included) and a rear solid steel door with a lock. It is possible to insert the wiring through the closed top and bottom panels (with end caps included).The set includes a ventilation panel with 4 230V fans. In addition, the set includes accessories for fixing support rails, M6 screws and plugs for entry panels.
The DIGITUS wall mounting cabinet protects your video surveillance system from unauthorized access. Can be used for all applications in areas such as network, safety, DVR, sound, radio or cabling. The mounting bracket makes mounting your device easy.
