The Inter-Tech SWAS-650/1000 pull-out is a 48.26 cm (19") built-in shelf for 1000 mm deep cabinets including telescopic rails for pulling out in the color RAL 9005. Shelf type Color black EAN 4260455644273 Manufacturer no. 88887260 IT cabinet area Intended use for 1000 mm deep cabinets Suitable for required installation space 1 U Load capacity up to 35 kg Material metal Accessories available: 8x cage screws and cage nuts, 8x plastic washers Dimensions Width: 485mm x Height: 44.5mm x Depth/Length: 650mm Weight 5.1kg
The Inter-Tech SW-650/1000 is a 48.26 cm (19") shelf for 1000 mm deep cabinets with side fastening in the color RAL 9005. Shelf type Color black EAN 4260455644310 Manufacturer no. 88887264 IT cabinet area Intended use for 1000 mm deep cabinets Suitable for required installation space 1 U Load capacity up to 90 kg Mounting side fastening Material metal Accessories available: 8x cage screws and cage nuts, 8x plastic washers Dimensions Width: 470mm x Height: 45mm x Depth/Length: 650mm Weight 6.3kg
The Inter-Tech floor SW-1U-300 is a 48.26 cm (19") floor with a depth of 300 mm in the color RAL 9005. The floor with a load capacity of up to 15 kg requires an installation space of 1 height unit and is supplied with mounting material. Shelf type Color black EAN 4260455646529 Manufacturer no. 88887342 IT cabinet area Purpose of the shelf Suitable for 1U installation space Load capacity up to 15 kg Material metal Dimensions Width: 480mm x Height: 45mm x Depth/Length: 300mm Weight 1.4kg
• Steel sheet housing with welded frame, completely pre-assembled • Right- and left-sided metal protected air inlets for passive climatisation • Side walls not detachable • Roof hinged, inner roof prepared for mounting of 2 x single fan Art.-No. 691664 • Bottom with PG glands 1 x PG48, 2 x PG21 and 3 x Ø 20 mm PVC blind grommets • Inside front 2 x 19" profile rails, galvanised • Front door steel sheet with reinforcement and 3-point bar locking, lockable • Cabinet parts inside completely earthed • Max. load 100 kg • Paint finish RAL7035, light grey
The Unique series network cabinet was developed and produced for cabling and network components. A variety of optimizations lead to optimal performance in terms of quality and added value. The cabinets are designed to be user-friendly and aesthetic in appearance. The front door consists of a complete metal frame with safety glass. The lockable swivel lever handle is prepared to accommodate profile half cylinders (adapter is included). All side panels are lockable and can be easily removed. Each cabinet contains galvanized 483 mm (19") profile rails, mounted at the front and back inside the cabinet. They are depth-adjustable and have a marking for the respective height unit. The vertical cable routing channels are installed next to the front profile rails (for cabinets with a width of 800 mm or more). They offer easy routing of patch and installation cables. The roof is prepared to accommodate a fan unit. The fully assembled 483 mm (19") cabinets are available in different versions Height units available from 22U up to 47U and a width of 600 or 800 mm and a depth of 600, 800 or 1000 mm. Standard color gray (RAL 7035) and black (RAL 9005). Type IT cabinet Color light gray EAN 4016032331131 Manufacturer no. DN-19 26U-6/6-1 Unique series Use network cabinet Server size 19 inches Cable management Slidable cable inlet with foam rubber seal in the base, cable inlet with brush strip on the upper and lower back of the cabinet Material sheet steel (powder-coated) Assembly Delivery is fully assembled Doors lockable, visible door Cooling roof module for ventilation unit Installation width maximum 483 mm Installation depth maximum 543 mm Installation height units 26 height units Installation carrying weight 800 kg Protection class (IP) 20 Removable side panels Dimensions Width: 60cm x Height: 134.2cm x Depth/Length: 60cm Weight 58.7kg
Modular toolless 1U Airflow Management Blanking Panel to prevent air recirculation by occupying unused rack spaceCovers open rack space to ensure proper airflowOccupies 1U of rack spaceConserve valuable rack space in the data centerPromotes proper airflowHelps to maintain proper rack temperatures within the enclosure by promoting top to bottom airflow movementTool-less mounting
Installs in various locations within the enclosure, for example, on the vertical mounting flanges and on the vertical 0U accessory channels. Provides mounting options for Rack PDUs and other small accessories.Installs in various locations within the enclosurefor example, on the vertical mounting flanges and on the vertical 0U accessory channelsProvides mounting options for Rack PDUs and other small accessories.
APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.Remote Management CapabilitiesLocal Current Monitoring DisplayAlarm ThresholdsLoad indicator LEDIntegrates with InfraStruXure CentralFlash UpgradeableRack-MountableSingle input power sourceWide range of input and output connections
Original part number AK-1401-B Product name Lanberg blanking panel 19'', 1U, black Producer Lanberg Class of product Component for rack 19"&10" Component for rack 19 Blank panel Additional information Blank panel 1URAL9004 Height 0.8 mm Width 4.5 mm Depth 48.5 mm Net weight 0.206 kg Colour Black
Original part number 104-15 Product name Netrack wall-mount patchpanel 10'', 12 - ports cat. 6 UTP LSA, with bracket Producer Netrack Class of product Patchpanel 19"&10" Number of ports 12 Type of connector RJ45 Category 6 Wiring type UTP - unschielded twisted pair cable, 4 pairs Additional functions Wall mountable Additional information for vertical mounting (ASA) 10"for mounting on the wall2 groups of 6 RJ45 jacks on the panelUTP RJ-45 jack from front sideKrone connector from rear sideconnector are described form rear side by port number and colour codingfor wiring please use the Krone-toolhooks to attach the cable bundlefront panel is equipped with port identification field - white Height 1 U Width 10 inches Colour Black
